Electronic tags
OMA series
189, Rue d'Aubervilliers C.P. 97 75886 PARIS Cedex 18 FRANCE
Tél : 33 (0)1.44.65.65.00 Fax : 33 (0)1.44.65.65.10
http://www.balogh-group.com
IDENTIFICATION
with FRAM
SYSTEMS
GAMME GO
REFERENCES
OMA
______________________________________________________________________________________________________________________________________________________________________________________________________
FF
1
packaging style
(refer to data sheet
"Tag packaging styles")
/D
</capacity>
no battery double speed
required (option for FF = 93)
</special features>
default value:
64 bytes
DESCRIPTION __________________________________________________________________________________________________________________________________________________________________________________________________________
R/W tags where data can be transmitted without contact or line-of-sight to/from:
• a stationary R/W head (types: ERO, ERA or TLEB) in conjunction with an appropriate Balogh interface in serial
mode (interface suffix: A in standard speed, D in double speed) or in parallel mode (CELA 81: consult Balogh),
• a maintenance handheld (LAPC 17 / EAX or PM 15).
COMMON CHARACTERISTICS ______________________________________________________________________________________________________________________________________________________
•
•
•
•
•
•
•
•
•
Code...................................................................................................................................................... R/W
Memory technology........................................................................................................ Ferro-electrique RAM
Memory capacity ...................................................................64 bytes, 2 or 8 Kbytes (styles 73 & 86 : no 8 Kb)
Number of reads and writes ............................................................................................................... unlimited
Typical R/W time (using ERO/ERA/TLEB) in standard speed...................................................50 + 10 ms/ byte
Typical R/W time (using ERO/ERA/TLEB) in double speed........................................................ 25 + 5 ms/ byte
Minimum operating temperature ...........................................................................................................- 25 °C
Packaging ............................................................................................................................................ Rilsan
Protection rating (style 93 is IP 67 in addition).......................................................................................... IP 65
CHARACTERISTICS DEPENDENT ON OMA & R/W HEAD STYLES ________________________________________
associated R/W heads (Dét. in mm)
style tempe-
ERA styles Dét. acc. to ERA style
rature
71
< 85°C
71 / 85 or 100
80 / 180
891
110
35 g
73
< 70°C
71 / 85 or 100
80 / 160
891
60
25 g
83
< 70°C
85 / 80
100 / 340
71 / 85 or 100/ 80
80 / 220 / 240
891
110
100 g
85
< 85°C
85 / 80
120 / 400
85 or 100 / 80
320 / 440
450 g
86
< 85°C
85 or 100 / 80
180 / 400
40 g
93
< 85°C
71 / 85 or 100 /80
90 / 220 / 360
85 / 80
110 / 400
ERO styles
Dét. acc. to ERO style TLEB
891
Dét.
weight
FF
110
100 g
Dét: distance to be maintained between tags to prevent error caused by two tags entering the field of the same head.
Ranges: refer to the data sheets of R/W heads (transceivers).
SPECIAL FEATURES _________________________________________________________________________________________________________________________________________________________________________________________
OMA 931/2K/1291: the access to the additional FRAM (byte addresses ranging from 800 h to 83F h) is disabled.
BALOGH SA à Directoire au Capital de 800 000 € - R.C.B. PARIS 582 061 073
Subject to modifications
Ref.: F- OMA -1.0-GB
Electronic tags
FRANCE
MEGA & MID .ID RANGES
IDENTIFICATION SYSTEMS
50
7
m
5m
93
40
mm
>
<-
a and b ≥ 10 mm
65
mm
a
15 mm
Tag environment:
the tags are not to be mounted directly in a recessed metal cavity.
To reach the ranges mentioned in the R/W head data sheets,
metal-free clearances round the tag are required as a minimum:
b
189, Rue d'Aubervilliers C.P. 97 75886 PARIS Cedex 18
Tél : 33 (0)1.44.65.65.00 Fax : 33 (0)1.44.65.65.10
http://www.balogh-group.com
Packaging
styles
mm
5 mm
Ø 4.5 mm
22
.5
4
m
5m
<
BA
G
LO
H
< -- >x
73
-- >
2 x Ø 4.5
2 travel directions.
±
17
2m
30
mm
12.5 mm
a and b ≥ 10 mm
m
mm
Hand mounted on the plastic bracket (included).
71
Ø 5 mm
15 mm
10 mm
40
mm
30
mm
a and b ≥ 10 mm
4xØ4mm
4xØ4.5 mm
40
50
mm
40
mm
mm
a and b ≥ 10 mm
83
15 mm
50
m
mm
50 mm
65 mm
75
m
Hand mounted on the (included) plastic bracket, the wings of which may be hand cut out.
53
mm
84.5 mm
.5
86
flush
mounting
m
7m
Direct the badge perpendicularly to the plane of the R/W head.
m
m
40 m
4xØ5.5 mm
40 mm
85
65
80
m
m
m
65
m
10 mm
m
130
≥ 30 mm on 3 sides
mm
Fixed through four diagonally-directed oblong holes.
56
20 mm
a and b ≥ 30 mm
73 mm
Fixed in cement or concrete.
BALOGH SA, 189 rue d'Aubervilliers CP97 75886 PARIS Cedex 18 FRANCE Tél : 33 (0)1 44 65 65 00 Fax : 33 (0)1 44 65 65 10
S.A à Directoire au Capital de 800 000 € - R.C.B. PARIS 582 061 073
subject to modifications
Ref: F-03-28-03-GB Packaging styles id2