Magnet House, 1st Floor,
Flat No. 601, 6th Floor,
Narottam Morarji Marg, Ballard Estate,
Paigah Plaza, Basheerbagh,
Ph : +91-11-223310788 / 23314540
Ph : +91-22-22616853 / 22641320
Ph : +91-40-23297630 / 23297631
Fax : +91-11-23722447
Fax : +91-22-22614085
Fax : +91-40-23297363
e-mail : [email protected]
e-mail : [email protected]
e-mail : [email protected]
MUMBAI
Bulk Material Handling Equi pment
Block - D, 3rd Floor,
Assistant Divisional Manager
Cell: +91-9304813195
Ph: +91-657-3046259
Fax: +91 - 657-2345724
e-mail: [email protected]
e-mail : [email protected]
Ph : +91-33-44033553
22 Camac Street, Kolkata - 700 016
HYDERABAD
Ph : +91-657 - 3046242
Cell : + 91 - 9334002278
Assistant General Manager
Bulk Material Handling Systems
Port &Yard Equi pment Division
TRF Limited
TECHNICAL SPECIFICATIONS
Himalaya House,
11th Floor 23, Kasturba Gandhi Marg
NEW DELHI
REGIONAL OFFICES
e-mail : [email protected]
Fax : +91-657-2345214
Business Development Department
MARKETING OFFICES
11, Station Road Burma Mines, Jamshedpur-831007, Jharkhand
Phone : +91- 657-3046500/ 598
Fax no. : +91- 657-2345732, e-mail : [email protected]
HEAD OFFICE & WORKS
= Comprises special design with concave and convex curve to minimise the un-supported length of belt
= Material handled coal, iron ore, limestone, etc. to fill the bunker or pile of mounted on ground
= Up to 2000 mm belt
= Driven electrically
= Manufactured as one-way chute, two-way chute & three-way chute
Likhra / Jsr. (0657) 2291356
SIDE VIEW OF A TRAVELLING TRIPPER
FRONT VIEW OF A TRAVELLING TRIPPER
Travelling Trippers
A
A
Travelling Trippers
Enterprise
TRF LIMITED
Enterprise
TRF LIMITED
Travelling Trippers
TRF LIMITED
A
individual actuators whichever is required by the customer.
material at the desired location on the conveyor with the help
single actuator either by using special link mechanism or by
The tripper is provided in the conveying system to stack the
The entire bunker opening is sealed by covering with a belt.
on each side. These trippers have a rigid welded steel frame
Bunker Belt Sealing
with wheels, which move on rails, placed parallel to conveyor
COAL
COAL
COAL
COAL
COAL
LIGNITE
chute discharge is cleared automatically to drop the material
used where continuous and uniform distribution of material
By virtue of such a belt profile, the bunker opening below the
Motorised trippers move on independent electric motors. It is
Enterprise
Material Handling, Capacity & other features of some Travelling Trippers:
MATERIAL
of chute/chutes fitted to the tripper. The tripper is provided
The covering belt is deflected in a particular profile with the
to resist shock and minimise distortion.
COAL
help of a set of idlers and it is mounted on the tripper chute.
Motorised Tripper
into bunker.
along the conveyor is required or where the tripper is moved
LIME
COAL
COAL
CLEAN COAL
CLEAN COAL
back and forth frequently. It can be automatically reversed at
CLEAN COAL
each end of its travel with the help of limit switches carried on
the tripper and actuated by stops placed where desired along
the runway. Push buttons are provided for manual control to
regulate the tripper. The tripper can be moved either when the
conveyor belt is moving or stationary. Each tripper is provided
with a hand operated powerful, quick action rail clamp for
holding it in a fixed position. The tripper is provided with a
platform for the operator.
COAL
COAL
Features
CRUSHED
COAL
l To minimize the over hang of belt, the tripper structure
has been designed with concave and convex curves.
L.S/DOLO
IRON ORE/
FLUX
l There are options of drive system. Drives with chain and
sprocket; direct drive with hollow shaft mounted
gearbox alongwith motor and brake.
COKE
SINTER
COAL
CRUSHED
COAL
l Direct drive is also given with hollow shaft mounted
geared motor with an inbuilt brake.
COAL
Long Travel Drive Assembly
Travel drive is through direct wheel axle drive design. A
hollow shaft mounted gear box is placed directly on the wheel
axle. The input of gearbox is coupled with an electric motor.
The brake is mounted on the rear extend shaft of the motor or
between input shaft of gearbox and motor shaft. All drive
components are mounted on a common drivebase which is
connected with the tripper’s main body with a torque arm.
Alternately geared motor may also be provided with hollow shaft
with inbuilt brake and torque arm arrangement to overcome
space constraint. The power is supplied by a cable reeling drum
mounted on tripper body or festooning cable arrangement, if the
travel length is small.
COAL
l The machine can be controlled either by local operation
from the machine or by remote operation from control
station with selector switch or both.
CRUSHED
COKE
COKE
IRON ORE
l The machine has been provided with all safety controls
and limit switches, such as over travel limit switch,
chute-jamming switch, etc.
350 TPH
(-) 100 mm
250 TPH
(-) 15 mm
1600 TPH
(-)250 mm
400 TPH
(-)20 mm
1800 TPH
(-)20 mm
1200 TPH
(-)30 mm
400 TPH
(-)50 mm
200 TPH
(-)25 TO 80 mm
500 TPH
(-)40/(-)30 mm
200 TPH
(-) 40 mm
800 TPH
(-) 20 mm
1350 TPH
(-) 25 mm
210 TPH
(-) 20 mm
125 TPH
(-) 20 mm
125 TPH
(-) 20 mm
50 TPH
(-) 20 mm
750 TPH
(-) 75 mm
1500 TPH
(-) 250 mm
300 TPH
(-) 20 mm
660 TPH
(-) 6 mm
750 TPH
20 mm
750 TPH
20 mm
750 TPH
20 mm
150 TPH
6 mm
1600 TPH
20 mm
150 TPH
6 mm
CAPACITY
RATED TPH
LUMP SIZE
mm
CAPACITY
DESIGN
165 TPH
1760 TPH
165 TPH
825 TPH
825 TPH
825 TPH
730 TPH
330 TPH
1800 TPH
825 TPH
60 TPH
150 TPH
150 TPH
230 TPH
1485 TPH
960 TPH
240 TPH
600 TPH
240 TPH
480 TPH
1440 TPH
1900 TPH
500 TPH
1900 TPH
275 TPH
385 TPH
3000 TPH
TYPE OF
CHUTE
BELT
WIDTH
2 WAY CHUTE
3.7 KW
1400
3.7 KW
3 WAY CHUTE
2200 TPH
2000 TPH
(-) 20 mm
1 WAY CHUTE
2760 TPH
2300 TPH
(-) 100 mm
2 WAY CHUTE
2760 TPH
2300 TPH
(-) 100 mm
3 WAY CHUTE
2420 TPH
2200 TPH
(-) 20 mm
3 WAY CHUTE
1760 TPH
1600 TPH
(-) 20 mm
2 WAY CHUTE
1200 TPH
1000 TPH
(-)5 TO (+) 5 mm
2 WAY CHUTE
1200 TPH
1000 TPH
(-)5 TO (+) 5 mm
2 WAY CHUTE
2880 TPH
2400 TPH
(-) 8 mm
1000 TPH
(-) 50 mm
1650 TPH
(-) 50 mm
1600 TPH
(-) 20 mm
1500 TPH
(-) 20 mm
300 TPH
(-) 6 mm
180 TPH
150 TPH
(-) 3 mm
480 TPH
MIDDDLINGS
COAL
COAL
COAL
COAL
COAL
COAL
COAL
COAL
COAL
COAL
COAL
360 TPH
1500 TPH
1760 TPH
1815 TPH
1200 TPH
3.7 KW
3.7 KW
5.5 KW
3.7 KW
2.2 KW
1 WAY CHUTE
3850 TPH
3500 TPH
(-) 10 mm
IRON ORE
5.5 KW
2.2 KW
2.2 KW
2.2 KW
2.2 KW
3.7 KW
2 WAY CHUTE
3850 TPH
3500 TPH
(-) 10 mm
COAL
(-) 13 mm
3.7 KW
3.7 KW
3.7 KW
2 WAY CHUTE
3850 TPH
3500 TPH
(-) 10 mm
IRON ORE
600 TPH
(-) 13 mm
3.7 KW
800
1200
1000
1000
1000
600
1400
1000
2 WAY CHUTE
650
650
650
1400
1200
800
1000
3.7 KW
1000
3.7 KW
1000
3.7 KW
1400
3.7 KW
1400
5.5 KW
1000
1.5/0.75 KW
1600
7.5 KW
1000
2 WAY CHUTE
3850 TPH
3500 TPH
(-) 10 mm
COAL
3300 TPH
(-) 20 mm
3.7 KW
3.7 KW
1500
2 WAY CHUTE
1980 TPH
1800 TPH
(-) 25 mm
COAL
COAL
COAL
TRAVEL DRIVE
POWER KW
650
3 WAY CHUTE
3 WAY CHUTE
2 WAY CHUTE
3 WAY CHUTE
3 WAY CHUTE
2 WAY CHUTE
1 WAY CHUTE
2 WAY CHUTE
500
1 WAY CHUTE
1 WAY CHUTE
2 WAY CHUTE
2 WAY CHUTE
3 WAY CHUTE
2 WAY CHUTE
2 WAY CHUTE
2 WAY CHUTE
3 WAY CHUTE
3 WAY CHUTE
2 WAY CHUTE
2 WAY CHUTE
2 WAY CHUTE
2 WAY CHUTE
1 WAY CHUTE
1200
2 WAY CHUTE
2 WAY CHUTE
3 WAY CHUTE
1320 TPH
1200 TPH
CHAR
l The machine can be provided with cradle assembly,
mounted on the machine to protect the conveyor belt
from damage due to the impact of discharged material.
400 TPH
3 WAY CHUTE
2420 TPH
2200 TPH
(-) 20 mm
(+)5mm TO (-)50 mm
COAL
Flapper Gate Drive Assembly
2500 TPH
1000
2 WAY CHUTE
435 TPH
360 TPH
COAL
The gate drive is through electro mechanical linear actuator
fitted with link mechanism. The actuator is supported on a
trunnion-mounted bracket. In a three-way chute two flap
gates are required. Both can be operated by a
(-) 6 mm
1200
2 WAY CHUTE
720 TPH
COAL
SINTER
(-) 150 mm
2000
3 WAY CHUTE
3630 TPH
COAL
FRONT VIEW OF A ONE-WAY CHUTE TRAVELLING TRIPPER
2 WAY CHUTE
2 x 3.7 KW
1000
1 WAY CHUTE
3.7 KW
650
3 WAY CHUTE
3.7 KW
1200
3 WAY CHUTE
3.7 KW
1400
3 WAY CHUTE
2 x 2.2 KW
1400
1 WAY CHUTE
2 x 2.2 KW
1600
2 WAY CHUTE
2 x 3.7 KW
1200
2 x 2.2 KW
1600
2 x 5.5 KW
1200
2 x 2.2 KW
1200
2 x 2.2 KW
1400
2 x 3.7 KW
1600
2 x 5.5 KW
1600
1 x 7.5 KW
1600
1 x 7.5 KW
1600
2 x 5.5 KW
1600
2 x 5.5 KW
1600
2 x 5.5 KW
2000
2 x 5.5 KW
2000
2 x 5.5 KW
1600
2 x 5.5 KW
1400
2 x 2.2 KW
1600
2 x 5.5 KW
2 x 3.7 KW
2 x 3.7 KW
2 x 7.5 KW
e-mail : [email protected]
e-mail : [email protected]
Fax : +91-40-23297363
Fax : +91-22-22614085
Fax : +91-11-23722447
Ph : +91-40-23297630 / 23297631
Ph : +91-22-22616853 / 22641320
Ph : +91-11-223310788 / 23314540
Narottam Morarji Marg, Ballard Estate,
11th Floor 23, Kasturba Gandhi Marg
Magnet House, 1st Floor,
Himalaya House,
MUMBAI
NEW DELHI
TECHNICAL SPECIFICATIONS
e-mail : [email protected]
Paigah Plaza, Basheerbagh,
Flat No. 601, 6th Floor,
HYDERABAD
REGIONAL OFFICES
e-mail : [email protected]
Fax : +91-657-2345214
Assistant Divisional Manager
Cell: +91-9304813195
Ph: +91-657-3046259
Fax: +91 - 657-2345724
e-mail: [email protected]
e-mail : [email protected]
Ph : +91-33-44033553
22 Camac Street, Kolkata - 700 016
Block - D, 3rd Floor,
Business Development Department
Ph : +91-657 - 3046242
Cell : + 91 - 9334002278
Assistant General Manager
Bulk Material Handling Systems
Port &Yard Equi pment Division
Bulk Material Handling Equi pment
MARKETING OFFICES
11, Station Road Burma Mines, Jamshedpur-831007, Jharkhand
Phone : +91- 657-3046500/ 598
Fax no. : +91- 657-2345732, e-mail : [email protected]
TRF Limited
HEAD OFFICE & WORKS
= Comprises special design with concave and convex curve to minimise the un-supported length of belt
= Material handled coal, iron ore, limestone, etc. to fill the bunker or pile of mounted on ground
= Up to 2000 mm belt
= Driven electrically
= Manufactured as one-way chute, two-way chute & three-way chute
Likhra / Jsr. (0657) 2291356
SIDE VIEW OF A TRAVELLING TRIPPER
FRONT VIEW OF A TRAVELLING TRIPPER
Travelling Trippers
A
A
Travelling Trippers
Enterprise
TRF LIMITED
Enterprise
TRF LIMITED
Travelling Trippers
TRF LIMITED
A
The tripper is provided in the conveying system to stack the
single actuator either by using special link mechanism or by
material at the desired location on the conveyor with the help
individual actuators whichever is required by the customer.
with wheels, which move on rails, placed parallel to conveyor
Material Handling, Capacity & other features of some Travelling Trippers:
MATERIAL
of chute/chutes fitted to the tripper. The tripper is provided
Bunker Belt Sealing
Enterprise
LUMP SIZE
mm
CAPACITY
RATED TPH
CAPACITY
DESIGN
TYPE OF
CHUTE
BELT
WIDTH
TRAVEL DRIVE
POWER KW
COAL
6 mm
150 TPH
165 TPH
2 WAY CHUTE
650
3.7 KW
COAL
20 mm
1600 TPH
1760 TPH
3 WAY CHUTE
1400
3.7 KW
on each side. These trippers have a rigid welded steel frame
The entire bunker opening is sealed by covering with a belt.
COAL
6 mm
150 TPH
165 TPH
3 WAY CHUTE
800
3.7 KW
to resist shock and minimise distortion.
The covering belt is deflected in a particular profile with the
COAL
20 mm
750 TPH
825 TPH
2 WAY CHUTE
1200
3.7 KW
COAL
20 mm
750 TPH
825 TPH
3 WAY CHUTE
1000
3.7 KW
COAL
20 mm
750 TPH
825 TPH
3 WAY CHUTE
1000
5.5 KW
LIGNITE
(-) 6 mm
660 TPH
730 TPH
2 WAY CHUTE
1000
3.7 KW
LIME
(-) 20 mm
300 TPH
330 TPH
1 WAY CHUTE
600
2.2 KW
COAL
(-) 250 mm
1500 TPH
1800 TPH
2 WAY CHUTE
1400
5.5 KW
COAL
(-) 75 mm
750 TPH
825 TPH
2 WAY CHUTE
1000
2.2 KW
CLEAN COAL
(-) 20 mm
50 TPH
60 TPH
1 WAY CHUTE
500
2.2 KW
CLEAN COAL
(-) 20 mm
125 TPH
150 TPH
1 WAY CHUTE
650
2.2 KW
back and forth frequently. It can be automatically reversed at
CLEAN COAL
(-) 20 mm
125 TPH
150 TPH
2 WAY CHUTE
650
2.2 KW
each end of its travel with the help of limit switches carried on
COAL
(-) 20 mm
210 TPH
230 TPH
2 WAY CHUTE
650
3.7 KW
COAL
(-) 25 mm
1350 TPH
1485 TPH
3 WAY CHUTE
1400
3.7 KW
CRUSHED
COAL
(-) 20 mm
800 TPH
960 TPH
2 WAY CHUTE
1200
3.7 KW
help of a set of idlers and it is mounted on the tripper chute.
Motorised Tripper
Motorised trippers move on independent electric motors. It is
By virtue of such a belt profile, the bunker opening below the
used where continuous and uniform distribution of material
chute discharge is cleared automatically to drop the material
along the conveyor is required or where the tripper is moved
the tripper and actuated by stops placed where desired along
the runway. Push buttons are provided for manual control to
regulate the tripper. The tripper can be moved either when the
conveyor belt is moving or stationary. Each tripper is provided
with a hand operated powerful, quick action rail clamp for
holding it in a fixed position. The tripper is provided with a
platform for the operator.
into bunker.
Features
l To minimize the over hang of belt, the tripper structure
has been designed with concave and convex curves.
l There are options of drive system. Drives with chain and
sprocket; direct drive with hollow shaft mounted
gearbox alongwith motor and brake.
l Direct drive is also given with hollow shaft mounted
geared motor with an inbuilt brake.
Long Travel Drive Assembly
Travel drive is through direct wheel axle drive design. A
hollow shaft mounted gear box is placed directly on the wheel
axle. The input of gearbox is coupled with an electric motor.
The brake is mounted on the rear extend shaft of the motor or
between input shaft of gearbox and motor shaft. All drive
components are mounted on a common drivebase which is
connected with the tripper’s main body with a torque arm.
Alternately geared motor may also be provided with hollow shaft
with inbuilt brake and torque arm arrangement to overcome
space constraint. The power is supplied by a cable reeling drum
mounted on tripper body or festooning cable arrangement, if the
travel length is small.
l The machine can be controlled either by local operation
from the machine or by remote operation from control
station with selector switch or both.
l The machine has been provided with all safety controls
and limit switches, such as over travel limit switch,
chute-jamming switch, etc.
l The machine can be provided with cradle assembly,
mounted on the machine to protect the conveyor belt
from damage due to the impact of discharged material.
Flapper Gate Drive Assembly
The gate drive is through electro mechanical linear actuator
fitted with link mechanism. The actuator is supported on a
trunnion-mounted bracket. In a three-way chute two flap
gates are required. Both can be operated by a
FRONT VIEW OF A ONE-WAY CHUTE TRAVELLING TRIPPER
L.S/DOLO
(-) 40 mm
200 TPH
240 TPH
2 WAY CHUTE
800
3.7 KW
IRON ORE/
FLUX
(-)40/(-)30 mm
500 TPH
600 TPH
2 WAY CHUTE
1000
3.7 KW
COKE
(-)25 TO 80 mm
200 TPH
240 TPH
3 WAY CHUTE
1000
3.7 KW
SINTER
(-)50 mm
400 TPH
480 TPH
3 WAY CHUTE
1000
3.7 KW
COAL
(-)30 mm
1200 TPH
1440 TPH
2 WAY CHUTE
1400
3.7 KW
CRUSHED
COAL
(-)20 mm
1800 TPH
1900 TPH
2 WAY CHUTE
1400
5.5 KW
COAL
(-)20 mm
400 TPH
500 TPH
2 WAY CHUTE
1000
1.5/0.75 KW
COAL
(-)250 mm
1600 TPH
1900 TPH
2 WAY CHUTE
1600
7.5 KW
CRUSHED
COKE
(-) 15 mm
250 TPH
275 TPH
1 WAY CHUTE
1000
3.7 KW
COKE
(-) 100 mm
350 TPH
385 TPH
2 WAY CHUTE
1200
3.7 KW
IRON ORE
(-) 150 mm
2500 TPH
3000 TPH
2 WAY CHUTE
1500
2 x 3.7 KW
MIDDDLINGS
(-) 6 mm
400 TPH
480 TPH
2 WAY CHUTE
1000
3.7 KW
COAL
(-) 3 mm
150 TPH
180 TPH
1 WAY CHUTE
650
3.7 KW
CHAR
(-) 6 mm
300 TPH
360 TPH
3 WAY CHUTE
1200
3.7 KW
COAL
(-) 20 mm
1500 TPH
1500 TPH
3 WAY CHUTE
1400
2 x 2.2 KW
COAL
(-) 20 mm
1600 TPH
1760 TPH
3 WAY CHUTE
1400
2 x 2.2 KW
COAL
(-) 50 mm
1650 TPH
1815 TPH
1 WAY CHUTE
1600
2 x 3.7 KW
COAL
(-) 50 mm
1000 TPH
1200 TPH
2 WAY CHUTE
1200
2 x 2.2 KW
COAL
(-) 8 mm
2400 TPH
2880 TPH
2 WAY CHUTE
1600
2 x 5.5 KW
COAL
(-)5 TO (+) 5 mm
1000 TPH
1200 TPH
2 WAY CHUTE
1200
2 x 2.2 KW
COAL
(-)5 TO (+) 5 mm
1000 TPH
1200 TPH
2 WAY CHUTE
1200
2 x 2.2 KW
COAL
(-) 20 mm
1600 TPH
1760 TPH
3 WAY CHUTE
1400
2 x 3.7 KW
COAL
(-) 20 mm
2200 TPH
2420 TPH
3 WAY CHUTE
1600
2 x 5.5 KW
COAL
(-) 100 mm
2300 TPH
2760 TPH
2 WAY CHUTE
1600
1 x 7.5 KW
COAL
(-) 100 mm
2300 TPH
2760 TPH
1 WAY CHUTE
1600
1 x 7.5 KW
COAL
(-) 20 mm
2000 TPH
2200 TPH
3 WAY CHUTE
1600
2 x 5.5 KW
IRON ORE
(-) 10 mm
3500 TPH
3850 TPH
1 WAY CHUTE
1600
2 x 5.5 KW
IRON ORE
(-) 10 mm
3500 TPH
3850 TPH
2 WAY CHUTE
1600
2 x 5.5 KW
COAL
(-) 10 mm
3500 TPH
3850 TPH
2 WAY CHUTE
2000
2 x 5.5 KW
COAL
(-) 10 mm
3500 TPH
3850 TPH
2 WAY CHUTE
2000
2 x 5.5 KW
COAL
(-) 25 mm
1800 TPH
1980 TPH
2 WAY CHUTE
1600
2 x 5.5 KW
SINTER
(+)5mm TO (-)50 mm
1200 TPH
1320 TPH
3 WAY CHUTE
1400
2 x 2.2 KW
COAL
(-) 20 mm
2200 TPH
2420 TPH
3 WAY CHUTE
1600
2 x 5.5 KW
COAL
(-) 13 mm
360 TPH
435 TPH
2 WAY CHUTE
1000
2 x 3.7 KW
COAL
(-) 13 mm
600 TPH
720 TPH
2 WAY CHUTE
1200
2 x 3.7 KW
COAL
(-) 20 mm
3300 TPH
3630 TPH
3 WAY CHUTE
2000
2 x 7.5 KW
e-mail : [email protected]
e-mail : [email protected]
Fax : +91-40-23297363
Fax : +91-22-22614085
Fax : +91-11-23722447
Ph : +91-40-23297630 / 23297631
Ph : +91-22-22616853 / 22641320
Ph : +91-11-223310788 / 23314540
Narottam Morarji Marg, Ballard Estate,
11th Floor 23, Kasturba Gandhi Marg
Magnet House, 1st Floor,
Himalaya House,
MUMBAI
NEW DELHI
TECHNICAL SPECIFICATIONS
e-mail : [email protected]
Paigah Plaza, Basheerbagh,
Flat No. 601, 6th Floor,
HYDERABAD
REGIONAL OFFICES
e-mail : [email protected]
Fax : +91-657-2345214
Assistant Divisional Manager
Cell: +91-9304813195
Ph: +91-657-3046259
Fax: +91 - 657-2345724
e-mail: [email protected]
e-mail : [email protected]
Ph : +91-33-44033553
22 Camac Street, Kolkata - 700 016
Block - D, 3rd Floor,
Business Development Department
Ph : +91-657 - 3046242
Cell : + 91 - 9334002278
Assistant General Manager
Bulk Material Handling Systems
Port &Yard Equi pment Division
Bulk Material Handling Equi pment
MARKETING OFFICES
11, Station Road Burma Mines, Jamshedpur-831007, Jharkhand
Phone : +91- 657-3046500/ 598
Fax no. : +91- 657-2345732, e-mail : [email protected]
TRF Limited
HEAD OFFICE & WORKS
= Comprises special design with concave and convex curve to minimise the un-supported length of belt
= Material handled coal, iron ore, limestone, etc. to fill the bunker or pile of mounted on ground
= Up to 2000 mm belt
= Driven electrically
= Manufactured as one-way chute, two-way chute & three-way chute
Likhra / Jsr. (0657) 2291356
SIDE VIEW OF A TRAVELLING TRIPPER
FRONT VIEW OF A TRAVELLING TRIPPER
Travelling Trippers
A
A
Travelling Trippers
Enterprise
TRF LIMITED
Enterprise
TRF LIMITED
Travelling Trippers
TRF LIMITED
A
The tripper is provided in the conveying system to stack the
single actuator either by using special link mechanism or by
material at the desired location on the conveyor with the help
individual actuators whichever is required by the customer.
with wheels, which move on rails, placed parallel to conveyor
Material Handling, Capacity & other features of some Travelling Trippers:
MATERIAL
of chute/chutes fitted to the tripper. The tripper is provided
Bunker Belt Sealing
Enterprise
LUMP SIZE
mm
CAPACITY
RATED TPH
CAPACITY
DESIGN
TYPE OF
CHUTE
BELT
WIDTH
TRAVEL DRIVE
POWER KW
COAL
6 mm
150 TPH
165 TPH
2 WAY CHUTE
650
3.7 KW
COAL
20 mm
1600 TPH
1760 TPH
3 WAY CHUTE
1400
3.7 KW
on each side. These trippers have a rigid welded steel frame
The entire bunker opening is sealed by covering with a belt.
COAL
6 mm
150 TPH
165 TPH
3 WAY CHUTE
800
3.7 KW
to resist shock and minimise distortion.
The covering belt is deflected in a particular profile with the
COAL
20 mm
750 TPH
825 TPH
2 WAY CHUTE
1200
3.7 KW
COAL
20 mm
750 TPH
825 TPH
3 WAY CHUTE
1000
3.7 KW
COAL
20 mm
750 TPH
825 TPH
3 WAY CHUTE
1000
5.5 KW
LIGNITE
(-) 6 mm
660 TPH
730 TPH
2 WAY CHUTE
1000
3.7 KW
LIME
(-) 20 mm
300 TPH
330 TPH
1 WAY CHUTE
600
2.2 KW
COAL
(-) 250 mm
1500 TPH
1800 TPH
2 WAY CHUTE
1400
5.5 KW
COAL
(-) 75 mm
750 TPH
825 TPH
2 WAY CHUTE
1000
2.2 KW
CLEAN COAL
(-) 20 mm
50 TPH
60 TPH
1 WAY CHUTE
500
2.2 KW
CLEAN COAL
(-) 20 mm
125 TPH
150 TPH
1 WAY CHUTE
650
2.2 KW
back and forth frequently. It can be automatically reversed at
CLEAN COAL
(-) 20 mm
125 TPH
150 TPH
2 WAY CHUTE
650
2.2 KW
each end of its travel with the help of limit switches carried on
COAL
(-) 20 mm
210 TPH
230 TPH
2 WAY CHUTE
650
3.7 KW
COAL
(-) 25 mm
1350 TPH
1485 TPH
3 WAY CHUTE
1400
3.7 KW
CRUSHED
COAL
(-) 20 mm
800 TPH
960 TPH
2 WAY CHUTE
1200
3.7 KW
help of a set of idlers and it is mounted on the tripper chute.
Motorised Tripper
Motorised trippers move on independent electric motors. It is
By virtue of such a belt profile, the bunker opening below the
used where continuous and uniform distribution of material
chute discharge is cleared automatically to drop the material
along the conveyor is required or where the tripper is moved
the tripper and actuated by stops placed where desired along
the runway. Push buttons are provided for manual control to
regulate the tripper. The tripper can be moved either when the
conveyor belt is moving or stationary. Each tripper is provided
with a hand operated powerful, quick action rail clamp for
holding it in a fixed position. The tripper is provided with a
platform for the operator.
into bunker.
Features
l To minimize the over hang of belt, the tripper structure
has been designed with concave and convex curves.
l There are options of drive system. Drives with chain and
sprocket; direct drive with hollow shaft mounted
gearbox alongwith motor and brake.
l Direct drive is also given with hollow shaft mounted
geared motor with an inbuilt brake.
Long Travel Drive Assembly
Travel drive is through direct wheel axle drive design. A
hollow shaft mounted gear box is placed directly on the wheel
axle. The input of gearbox is coupled with an electric motor.
The brake is mounted on the rear extend shaft of the motor or
between input shaft of gearbox and motor shaft. All drive
components are mounted on a common drivebase which is
connected with the tripper’s main body with a torque arm.
Alternately geared motor may also be provided with hollow shaft
with inbuilt brake and torque arm arrangement to overcome
space constraint. The power is supplied by a cable reeling drum
mounted on tripper body or festooning cable arrangement, if the
travel length is small.
l The machine can be controlled either by local operation
from the machine or by remote operation from control
station with selector switch or both.
l The machine has been provided with all safety controls
and limit switches, such as over travel limit switch,
chute-jamming switch, etc.
l The machine can be provided with cradle assembly,
mounted on the machine to protect the conveyor belt
from damage due to the impact of discharged material.
Flapper Gate Drive Assembly
The gate drive is through electro mechanical linear actuator
fitted with link mechanism. The actuator is supported on a
trunnion-mounted bracket. In a three-way chute two flap
gates are required. Both can be operated by a
FRONT VIEW OF A ONE-WAY CHUTE TRAVELLING TRIPPER
L.S/DOLO
(-) 40 mm
200 TPH
240 TPH
2 WAY CHUTE
800
3.7 KW
IRON ORE/
FLUX
(-)40/(-)30 mm
500 TPH
600 TPH
2 WAY CHUTE
1000
3.7 KW
COKE
(-)25 TO 80 mm
200 TPH
240 TPH
3 WAY CHUTE
1000
3.7 KW
SINTER
(-)50 mm
400 TPH
480 TPH
3 WAY CHUTE
1000
3.7 KW
COAL
(-)30 mm
1200 TPH
1440 TPH
2 WAY CHUTE
1400
3.7 KW
CRUSHED
COAL
(-)20 mm
1800 TPH
1900 TPH
2 WAY CHUTE
1400
5.5 KW
COAL
(-)20 mm
400 TPH
500 TPH
2 WAY CHUTE
1000
1.5/0.75 KW
COAL
(-)250 mm
1600 TPH
1900 TPH
2 WAY CHUTE
1600
7.5 KW
CRUSHED
COKE
(-) 15 mm
250 TPH
275 TPH
1 WAY CHUTE
1000
3.7 KW
COKE
(-) 100 mm
350 TPH
385 TPH
2 WAY CHUTE
1200
3.7 KW
IRON ORE
(-) 150 mm
2500 TPH
3000 TPH
2 WAY CHUTE
1500
2 x 3.7 KW
MIDDDLINGS
(-) 6 mm
400 TPH
480 TPH
2 WAY CHUTE
1000
3.7 KW
COAL
(-) 3 mm
150 TPH
180 TPH
1 WAY CHUTE
650
3.7 KW
CHAR
(-) 6 mm
300 TPH
360 TPH
3 WAY CHUTE
1200
3.7 KW
COAL
(-) 20 mm
1500 TPH
1500 TPH
3 WAY CHUTE
1400
2 x 2.2 KW
COAL
(-) 20 mm
1600 TPH
1760 TPH
3 WAY CHUTE
1400
2 x 2.2 KW
COAL
(-) 50 mm
1650 TPH
1815 TPH
1 WAY CHUTE
1600
2 x 3.7 KW
COAL
(-) 50 mm
1000 TPH
1200 TPH
2 WAY CHUTE
1200
2 x 2.2 KW
COAL
(-) 8 mm
2400 TPH
2880 TPH
2 WAY CHUTE
1600
2 x 5.5 KW
COAL
(-)5 TO (+) 5 mm
1000 TPH
1200 TPH
2 WAY CHUTE
1200
2 x 2.2 KW
COAL
(-)5 TO (+) 5 mm
1000 TPH
1200 TPH
2 WAY CHUTE
1200
2 x 2.2 KW
COAL
(-) 20 mm
1600 TPH
1760 TPH
3 WAY CHUTE
1400
2 x 3.7 KW
COAL
(-) 20 mm
2200 TPH
2420 TPH
3 WAY CHUTE
1600
2 x 5.5 KW
COAL
(-) 100 mm
2300 TPH
2760 TPH
2 WAY CHUTE
1600
1 x 7.5 KW
COAL
(-) 100 mm
2300 TPH
2760 TPH
1 WAY CHUTE
1600
1 x 7.5 KW
COAL
(-) 20 mm
2000 TPH
2200 TPH
3 WAY CHUTE
1600
2 x 5.5 KW
IRON ORE
(-) 10 mm
3500 TPH
3850 TPH
1 WAY CHUTE
1600
2 x 5.5 KW
IRON ORE
(-) 10 mm
3500 TPH
3850 TPH
2 WAY CHUTE
1600
2 x 5.5 KW
COAL
(-) 10 mm
3500 TPH
3850 TPH
2 WAY CHUTE
2000
2 x 5.5 KW
COAL
(-) 10 mm
3500 TPH
3850 TPH
2 WAY CHUTE
2000
2 x 5.5 KW
COAL
(-) 25 mm
1800 TPH
1980 TPH
2 WAY CHUTE
1600
2 x 5.5 KW
SINTER
(+)5mm TO (-)50 mm
1200 TPH
1320 TPH
3 WAY CHUTE
1400
2 x 2.2 KW
COAL
(-) 20 mm
2200 TPH
2420 TPH
3 WAY CHUTE
1600
2 x 5.5 KW
COAL
(-) 13 mm
360 TPH
435 TPH
2 WAY CHUTE
1000
2 x 3.7 KW
COAL
(-) 13 mm
600 TPH
720 TPH
2 WAY CHUTE
1200
2 x 3.7 KW
COAL
(-) 20 mm
3300 TPH
3630 TPH
3 WAY CHUTE
2000
2 x 7.5 KW
Magnet House, 1st Floor,
Flat No. 601, 6th Floor,
Narottam Morarji Marg, Ballard Estate,
Paigah Plaza, Basheerbagh,
Ph : +91-11-223310788 / 23314540
Ph : +91-22-22616853 / 22641320
Ph : +91-40-23297630 / 23297631
Fax : +91-11-23722447
Fax : +91-22-22614085
Fax : +91-40-23297363
e-mail : [email protected]
e-mail : [email protected]
e-mail : [email protected]
MUMBAI
Bulk Material Handling Equi pment
Block - D, 3rd Floor,
Assistant Divisional Manager
Cell: +91-9304813195
Ph: +91-657-3046259
Fax: +91 - 657-2345724
e-mail: [email protected]
e-mail : [email protected]
Ph : +91-33-44033553
22 Camac Street, Kolkata - 700 016
HYDERABAD
Ph : +91-657 - 3046242
Cell : + 91 - 9334002278
Assistant General Manager
Bulk Material Handling Systems
Port &Yard Equi pment Division
TRF Limited
TECHNICAL SPECIFICATIONS
Himalaya House,
11th Floor 23, Kasturba Gandhi Marg
NEW DELHI
REGIONAL OFFICES
e-mail : [email protected]
Fax : +91-657-2345214
Business Development Department
MARKETING OFFICES
11, Station Road Burma Mines, Jamshedpur-831007, Jharkhand
Phone : +91- 657-3046500/ 598
Fax no. : +91- 657-2345732, e-mail : [email protected]
HEAD OFFICE & WORKS
= Comprises special design with concave and convex curve to minimise the un-supported length of belt
= Material handled coal, iron ore, limestone, etc. to fill the bunker or pile of mounted on ground
= Up to 2000 mm belt
= Driven electrically
= Manufactured as one-way chute, two-way chute & three-way chute
Likhra / Jsr. (0657) 2291356
SIDE VIEW OF A TRAVELLING TRIPPER
FRONT VIEW OF A TRAVELLING TRIPPER
Travelling Trippers
A
A
Travelling Trippers
Enterprise
TRF LIMITED
Enterprise
TRF LIMITED
Travelling Trippers
TRF LIMITED
A
individual actuators whichever is required by the customer.
material at the desired location on the conveyor with the help
single actuator either by using special link mechanism or by
The tripper is provided in the conveying system to stack the
The entire bunker opening is sealed by covering with a belt.
on each side. These trippers have a rigid welded steel frame
Bunker Belt Sealing
with wheels, which move on rails, placed parallel to conveyor
COAL
COAL
COAL
COAL
COAL
LIGNITE
chute discharge is cleared automatically to drop the material
used where continuous and uniform distribution of material
By virtue of such a belt profile, the bunker opening below the
Motorised trippers move on independent electric motors. It is
Enterprise
Material Handling, Capacity & other features of some Travelling Trippers:
MATERIAL
of chute/chutes fitted to the tripper. The tripper is provided
The covering belt is deflected in a particular profile with the
to resist shock and minimise distortion.
COAL
help of a set of idlers and it is mounted on the tripper chute.
Motorised Tripper
into bunker.
along the conveyor is required or where the tripper is moved
LIME
COAL
COAL
CLEAN COAL
CLEAN COAL
back and forth frequently. It can be automatically reversed at
CLEAN COAL
each end of its travel with the help of limit switches carried on
the tripper and actuated by stops placed where desired along
the runway. Push buttons are provided for manual control to
regulate the tripper. The tripper can be moved either when the
conveyor belt is moving or stationary. Each tripper is provided
with a hand operated powerful, quick action rail clamp for
holding it in a fixed position. The tripper is provided with a
platform for the operator.
COAL
COAL
Features
CRUSHED
COAL
l To minimize the over hang of belt, the tripper structure
has been designed with concave and convex curves.
L.S/DOLO
IRON ORE/
FLUX
l There are options of drive system. Drives with chain and
sprocket; direct drive with hollow shaft mounted
gearbox alongwith motor and brake.
COKE
SINTER
COAL
CRUSHED
COAL
l Direct drive is also given with hollow shaft mounted
geared motor with an inbuilt brake.
COAL
Long Travel Drive Assembly
Travel drive is through direct wheel axle drive design. A
hollow shaft mounted gear box is placed directly on the wheel
axle. The input of gearbox is coupled with an electric motor.
The brake is mounted on the rear extend shaft of the motor or
between input shaft of gearbox and motor shaft. All drive
components are mounted on a common drivebase which is
connected with the tripper’s main body with a torque arm.
Alternately geared motor may also be provided with hollow shaft
with inbuilt brake and torque arm arrangement to overcome
space constraint. The power is supplied by a cable reeling drum
mounted on tripper body or festooning cable arrangement, if the
travel length is small.
COAL
l The machine can be controlled either by local operation
from the machine or by remote operation from control
station with selector switch or both.
CRUSHED
COKE
COKE
IRON ORE
l The machine has been provided with all safety controls
and limit switches, such as over travel limit switch,
chute-jamming switch, etc.
350 TPH
(-) 100 mm
250 TPH
(-) 15 mm
1600 TPH
(-)250 mm
400 TPH
(-)20 mm
1800 TPH
(-)20 mm
1200 TPH
(-)30 mm
400 TPH
(-)50 mm
200 TPH
(-)25 TO 80 mm
500 TPH
(-)40/(-)30 mm
200 TPH
(-) 40 mm
800 TPH
(-) 20 mm
1350 TPH
(-) 25 mm
210 TPH
(-) 20 mm
125 TPH
(-) 20 mm
125 TPH
(-) 20 mm
50 TPH
(-) 20 mm
750 TPH
(-) 75 mm
1500 TPH
(-) 250 mm
300 TPH
(-) 20 mm
660 TPH
(-) 6 mm
750 TPH
20 mm
750 TPH
20 mm
750 TPH
20 mm
150 TPH
6 mm
1600 TPH
20 mm
150 TPH
6 mm
CAPACITY
RATED TPH
LUMP SIZE
mm
CAPACITY
DESIGN
165 TPH
1760 TPH
165 TPH
825 TPH
825 TPH
825 TPH
730 TPH
330 TPH
1800 TPH
825 TPH
60 TPH
150 TPH
150 TPH
230 TPH
1485 TPH
960 TPH
240 TPH
600 TPH
240 TPH
480 TPH
1440 TPH
1900 TPH
500 TPH
1900 TPH
275 TPH
385 TPH
3000 TPH
TYPE OF
CHUTE
BELT
WIDTH
2 WAY CHUTE
3.7 KW
1400
3.7 KW
3 WAY CHUTE
2200 TPH
2000 TPH
(-) 20 mm
1 WAY CHUTE
2760 TPH
2300 TPH
(-) 100 mm
2 WAY CHUTE
2760 TPH
2300 TPH
(-) 100 mm
3 WAY CHUTE
2420 TPH
2200 TPH
(-) 20 mm
3 WAY CHUTE
1760 TPH
1600 TPH
(-) 20 mm
2 WAY CHUTE
1200 TPH
1000 TPH
(-)5 TO (+) 5 mm
2 WAY CHUTE
1200 TPH
1000 TPH
(-)5 TO (+) 5 mm
2 WAY CHUTE
2880 TPH
2400 TPH
(-) 8 mm
1000 TPH
(-) 50 mm
1650 TPH
(-) 50 mm
1600 TPH
(-) 20 mm
1500 TPH
(-) 20 mm
300 TPH
(-) 6 mm
180 TPH
150 TPH
(-) 3 mm
480 TPH
MIDDDLINGS
COAL
COAL
COAL
COAL
COAL
COAL
COAL
COAL
COAL
COAL
COAL
360 TPH
1500 TPH
1760 TPH
1815 TPH
1200 TPH
3.7 KW
3.7 KW
5.5 KW
3.7 KW
2.2 KW
1 WAY CHUTE
3850 TPH
3500 TPH
(-) 10 mm
IRON ORE
5.5 KW
2.2 KW
2.2 KW
2.2 KW
2.2 KW
3.7 KW
2 WAY CHUTE
3850 TPH
3500 TPH
(-) 10 mm
COAL
(-) 13 mm
3.7 KW
3.7 KW
3.7 KW
2 WAY CHUTE
3850 TPH
3500 TPH
(-) 10 mm
IRON ORE
600 TPH
(-) 13 mm
3.7 KW
800
1200
1000
1000
1000
600
1400
1000
2 WAY CHUTE
650
650
650
1400
1200
800
1000
3.7 KW
1000
3.7 KW
1000
3.7 KW
1400
3.7 KW
1400
5.5 KW
1000
1.5/0.75 KW
1600
7.5 KW
1000
2 WAY CHUTE
3850 TPH
3500 TPH
(-) 10 mm
COAL
3300 TPH
(-) 20 mm
3.7 KW
3.7 KW
1500
2 WAY CHUTE
1980 TPH
1800 TPH
(-) 25 mm
COAL
COAL
COAL
TRAVEL DRIVE
POWER KW
650
3 WAY CHUTE
3 WAY CHUTE
2 WAY CHUTE
3 WAY CHUTE
3 WAY CHUTE
2 WAY CHUTE
1 WAY CHUTE
2 WAY CHUTE
500
1 WAY CHUTE
1 WAY CHUTE
2 WAY CHUTE
2 WAY CHUTE
3 WAY CHUTE
2 WAY CHUTE
2 WAY CHUTE
2 WAY CHUTE
3 WAY CHUTE
3 WAY CHUTE
2 WAY CHUTE
2 WAY CHUTE
2 WAY CHUTE
2 WAY CHUTE
1 WAY CHUTE
1200
2 WAY CHUTE
2 WAY CHUTE
3 WAY CHUTE
1320 TPH
1200 TPH
CHAR
l The machine can be provided with cradle assembly,
mounted on the machine to protect the conveyor belt
from damage due to the impact of discharged material.
400 TPH
3 WAY CHUTE
2420 TPH
2200 TPH
(-) 20 mm
(+)5mm TO (-)50 mm
COAL
Flapper Gate Drive Assembly
2500 TPH
1000
2 WAY CHUTE
435 TPH
360 TPH
COAL
The gate drive is through electro mechanical linear actuator
fitted with link mechanism. The actuator is supported on a
trunnion-mounted bracket. In a three-way chute two flap
gates are required. Both can be operated by a
(-) 6 mm
1200
2 WAY CHUTE
720 TPH
COAL
SINTER
(-) 150 mm
2000
3 WAY CHUTE
3630 TPH
COAL
FRONT VIEW OF A ONE-WAY CHUTE TRAVELLING TRIPPER
2 WAY CHUTE
2 x 3.7 KW
1000
1 WAY CHUTE
3.7 KW
650
3 WAY CHUTE
3.7 KW
1200
3 WAY CHUTE
3.7 KW
1400
3 WAY CHUTE
2 x 2.2 KW
1400
1 WAY CHUTE
2 x 2.2 KW
1600
2 WAY CHUTE
2 x 3.7 KW
1200
2 x 2.2 KW
1600
2 x 5.5 KW
1200
2 x 2.2 KW
1200
2 x 2.2 KW
1400
2 x 3.7 KW
1600
2 x 5.5 KW
1600
1 x 7.5 KW
1600
1 x 7.5 KW
1600
2 x 5.5 KW
1600
2 x 5.5 KW
1600
2 x 5.5 KW
2000
2 x 5.5 KW
2000
2 x 5.5 KW
1600
2 x 5.5 KW
1400
2 x 2.2 KW
1600
2 x 5.5 KW
2 x 3.7 KW
2 x 3.7 KW
2 x 7.5 KW