November 2016 update
Component Parts for
Mitsuba
NEW PMGR Starter
STARTER
We supply full line parts
17870
17816
17844
Metro Auto Industrial Inc.
Toll Free: 1-800-263-8761
Table of Contents
Assembly Diagram
................................. 5
32-85001 Diodes
32-85002 Diodes
51-85001 DE Housing
52-85001 CE Plate
52-85002 CE Plate
52-85XXX CE Plate
54-85501 Drive
54-85502 Drive
54-85504 Drive
54-855201 Pinion Gear
54-855203 Spring-Drive
54-855204 Roller-Clutch
54-855205 Spring-Clutch
54-855206 Clutch Barrel
54-855207 Retainer Ring
54-855208 Stop Collar
54-855100 Shaft
55-85000 Shift Lever Assy
55-85001 Shift Lever
55-85002 Spring-Shift Lever
55-85003 Spring-Shift Lever
55-85004 Sleeve-Shift Lever
55-85005 Pin Lock
55-85xxx Shift Lever
55-85xxx Sleeve-Shift Lever
57-8501 Field Case
57-8502 Field Case Assy
61-85001 Armature
61-85002 Armature
61-85004 Armature
62-85103 Bushing-DE
62-85104 Bushing-CE
66-85101 Contact
66-85102 Contact Disc
66-85103 Plunger
66-85104 Solenoid
66-85105 Cover-Solenoid
66-85106 Contact
66-85107 Contact Disc
66-85108 Solenoid
.................................
.................................
.................................
.................................
.................................
.................................
.................................
................................
................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
.................................
7
7
6
6
6
6
8
8
8
8
8
8
8
8
8
9
9
10
10
10
10
10
10
10
10
11
11
11
11
11
11
11
12
12
12
12
12
12
12
12
.................................
68-85101 Brush-Field (POS)
.................................
68-85102 Brush-Ground (NEG)
.................................
69-85100 Brush Holder Assy
..................................
69-85101 Repair Kit-Plunger
..................................
69-85102 Spring-Brush Holder
..................................
69-85104 Spring-Contact
.................................
69-85105 Rivet-Field (POS)
..................................
69-85106 Bridge-Brush Holder
..................................
69-85108 Brush Holder Assy
.................................
71-82143 Oil Ring-Battery Stud
.................................
71-85101 Seal-Brush Holder
.................................
71-85102 Seal-Brush Holder
.................................
71-851XX Plug-B+ Term Ext.
..................................
72-85101 Insulator-Battery Stud
.................................
72-85102 Plug-Field Case
.................................
76-85001 Switch Terminal
.................................
76-85002 Switch Terminal
..................................
76-85003 Bracket-CE Plate
.................................
76-85004 Snap Ring-Contact Bolt
..................................
76-85005 Planetanr Gear
.................................
76-85006 Switch Terminal
..................................
76-85007 Bracket-CE Plate
..................................
76-85008 Bracket-CE Plate
76-85009 Bracket-CE Plate-Right Side ..................................
76-85010 Bracket-CE Plate-Left Side ..................................
.................................
76-85011 Switch Terminal
.................................
76-85012 Stationary Gear
.................................
76-85XXX Switch Terminal
.................................
76-85XXX Stationary Gear
.................................
76-85XXX Stationary Plate
.................................
76-85XXX Bracket-CE Plate
.................................
84-82164 Contact Bolt-Internal use
.................................
84-82167 Thru Bolt-DE to CE
.................................
84-82168 Screw-DE Housing
84-82169 Thru Bolt-DE to CE-External .................................
84-89001 Retainer-Solenoid Contact .................................
.................................
84-82XXX Screw-Diodes
85-82101 Hex Nut-Terminal Post
Manufacturers and Supplier names and their part numbers are for reference use only.
2
13
13
13
14
14
14
13
13
13
15
15
15
15
15
15
16
16
17
16
16
16
17
17
17
17
16
16
16
16
16
17
18
18
18
18
18
18
................................. 18
Table of Contents
Manufacturers and Supplier names and their part numbers are for reference use only.
3
Unit
17814 (1.0kw)
17816N (1.2kw)
17844N (1.6kw)
17870N (1.6kw)
17871 (1.0kw)
17901 (1.0kw)
17953 (1.6kw)
17958N (1.2kw)
17959 (1.0kw)
17960N (1.6kw
19009N (1.6kw)
.......................................................................................................
.......................................................................................................
.......................................................................................................
.......................................................................................................
.......................................................................................................
.......................................................................................................
.......................................................................................................
.......................................................................................................
.......................................................................................................
.......................................................................................................
.......................................................................................................
22
21
19
19
22
22
19
21
22
19
20
Mitsuba 17870 Starter Tech
page ............................................................................................................................... 23
4
Manufacturers and Supplier names and their part numbers are for reference use only.
5
25
41
38
40
11
01
12
33
Assembly Diagram
Plunger Repair Kit
39
36
19
20
18
37
02
13
34
14
28
16
03
35
15
04
17
19
05
29
36
18
06
37
20
21
08
22
30
09
31
07
23
24
10
26
32
32
27
Mitsuba PMGR Parts
11mm
13mm
01
30
CE Plate
51-85001
DE Housing
Lester: 17816, 17844, 17870,
17960
OE:
Dim.:
Note:
Ref: 5691-124, SH-03118
Replace:
OE:
Lester: 17814, 17816, 17844,
17870, 17871, 17901
Dim.:
Note:
Ref: 52-85400, SH-04114
30
01
52-85001
51-85
DE Housing
Lester: 10914
OE:
Dim.:
Note:
Ref:
52-85002
CE Plate
Replace:
OE:
Lester: 10914, 17953, 17958,
17960, 19009
Dim.: 72mm OD,
Thru Bolt hole 6mm ID
Bushing 12mm ID, 16mm OD
10.4mm H
Note:
Ref:
30
52-85
CE Plate
Replace:
OE:
Lester: 17816, 17844
Dim.:
Note:
Manufacturers and Supplier names and their part numbers are for reference use only.
6
Mitsuba PMGR Parts
34
32-85001
Diodes
Lester: 17816, 17844, 17870,
17960, 19009
For: Mitsuba SM612, 710 Series
Dim.: 32.8mm L
Note: Fits inside the DE Housing
Ref: 32-8500, W485-186
34
32-85002
Diodes
Lester: 17958, 17661
For: Mitsuba SM422, SM612 Series
Dim.: 32.7mm L
Note: Fits inside the DE Housing
Ref: 32-8501
Manufacturers and Supplier names and their part numbers are for reference use only.
7
Mitsuba PMGR Parts
02
54-85501
Drive
9T, CW, 6-Spline
Lester: 17844, 17870, 17960,
19009
Dim.: 29mm Gear OD, 110.7mm L
44.35 Clutch OD
For:
Note:
Ref: 54-8507
06
Drive
9T, CW, 6-Spline
Lester: 17958
Dim.: 29mm Gear OD, 106.7mm L
44.35 Clutch OD
For:
Note:
Ref: 54-8508, SH-07118
54-855205
Spring-Clutch
Lester: 17870
Dim.:
For:
Note: Inside the Clutch, used
with 54-855204 Roller.
Ref:
54-855204
Roller-Clutch
54-85502
8
Spring-Drive
Lester: 17870
Dim.:
For:
Note:
Ref:
07
02
54-855203
Lester: 17870
Dim.:
For:
Note: Inside the Clutch, used
with 54-855205 Springs.
Ref:
09
54-855206
Clutch Barrel
Lester: 17870
Dim.:
For:
Note: to hold the 54-855204
Ref: 54-855205 Spring.
No Photo
Available
03
54-855201
54-85504
Pinion Gear
9T, 6-SPL, CW
Drive Assy
Lester: 17816, 17844, 17870,
17958, 17960
Dim.: 29mm OD x 11mm ID x
34mm L
For:
Note: Used on 54-85501 Drive
Ref: SH-07118A
9T, CW, -Spline
Lester: 10914
Dim.:
For:
Note:
Ref:
04 54-855207
Retainer Ring-Drive
Lester: 17870
Dim.:
For:
Note: to hold the 54-855201 &
54-855202 Pinion Gear
Ref:.
Manufacturers and Supplier names and their part numbers are for reference use only.
8
Mitsuba PMGR Parts
5
54-855208
Stop Collar-Drive
Lester: 17870
Dim.:
For:
Note:
Ref:
10
54-855100
Shaft-Drive
Lester: 17870
Dim.:
For:
Note: used with 54-855201
Pinion Gear & 54-855206 Clutch.
Ref:
Manufacturers and Supplier names and their part numbers are for reference use only.
9
Mitsuba PMGR Parts
55-85000
13
55-85004
Sleeve-Shift Lever
Shift Lever Assy
Lester: 17816, 17870
Dim.:
For:
Note: Content includes:
55-85001 Shift Lever
55-85003 Spring-Shift Lever
55-85004 Sleeve
Ref:
16 55-85002
Spring-Shift Lever
Lester: 17870
Dim.:
For:
Note: Used on 55-85001 Shift
Lever ( 3 pieces in a unit).
Ref:
15
55-85005
Pin Lock
55-85001
Lester: 17816, 17870
Dim.:
For:
Note: Used on 55-85001
Ref:
Shift Lever
Lester: 17816, 17870
Dim.:
For:
Note: Ref to 55-8500.
wo/Sleeve 55-85004.
Ref:
14
55-85003
Spring-Shift Lever
15
Lester: 17816, 17870
Dim.:
For:
Note: Used w/55-85001 Shift
Lever.
For a complete Shift Lever
Assy use 55-85000.
Ref:
Lester: 17816, 17870
Dim.:
For:
Note: Used w/55-85001
Ref:
55-85
Shift Lever
Lester: 10914
Dim.: 64.1mm L, 21.9mm Height
For:
Note:
Ref:
13
55-85
Sleeve-Shift Lever
Lester: 10914
Dim.:
For:
Note:
Ref:
Manufacturers and Supplier names and their part numbers are for reference use only.
10
Mitsuba PMGR Parts
29
57-8501
Field Case
Lester: 17870
Dim.: 72.6mm OD
91.5mm OAL
For:
Note: w/6 pcs Magnet assembled
Ref:SH-02118
29
28 61-85001
Armature
12V, 1.6kw, 9T
Lester: 17844, 17870, 17953,
17960, 19009
Dim.: 26 Bars, 9 Teeth
50mm OD, 115.8mm OAL
For: SM612, 710 Series
Note: This is big Armature.
There is also a small Armature.
Ref: 61-8503, SH-01118
Lester: 17816
Dim.: 72.85mm OD
80.60mm OAL
For:
Note: w/6 pcs Magnet assembled
Ref:
Armature
12V, 1.6kw, 9T
Lester: 10914, 10915, 19082,
19270, 19280, 19988
Dim.:
For: SM Series
Note:
Ref: SH-01161
Photo
Coming
Soon
57-8502
Field Case Assy
61-85004
28
61-85002
Armature
12V, 1.2kw, 9T
Lester: 17816, 17958
Dim.: 26 Bars, 9 Teeth
50.15mm OD, 105mm OAL
For:
Note: This is small Armature. For
big Armature use 61-85001.
Ref:61-8503, SH-0111861-8508.
62-85103
Bushing-D.E.
Lester: 17870
Dim.:
For:
Note:
Ref: 62-85301, SC-1015
62-85104
Bushing-C.E.
Lester: 10914, 17870, 17958,
17959, 17960, 19909
Dim.:
For:
Note:
Ref: 62-85400, SC-1118
Manufacturers and Supplier names and their part numbers are for reference use only.
11
Mitsuba PMGR Parts
38
66-85101
Contact
Lester: 17816, 17844, 17870,
17871, 17958, 17959, 17960
Dim.: 8.7mm ID
For:
Note:
Ref: 66-85652, W485-180,
SH-08114CS
39
12 66-85104
Solenoid
Lester: 17816, 17844, 17870
Dim.: 52.9mm OD, 22.9mm ID
29.2mm Height
For:
Note:
Ref: 66-85450, W455-109,
SH-08118
66-85102
Lester: 17816, 17844, 17870,
17871, 17953, 17958, 17959,
17960, 19009
Dim.: 17mm OD, 5mm ID
For:
Note:
Ref: 66-85651, SH-08114C
66-85103
Plunger
Lester: 17816, 17870
Dim.:
For: SM610 Series
Note:
Ref:
Contact Disc
Lester: 10914
Dim.: 4.8mmID, 14.95mmOD,
2.1mm Thick
For:
Note:
Ref:
12
Contact Disc
36
66-85107
39
11
Lester: 17816, 17844, 17870,
17960
Dim.: 52.5mm OD, 23mm ID,
5mm Thickness
For:
Note: Used on 66-85104
Solenoid
Ref:
38
66-85108
66-85105
Cover-Solenoid
Solenoid
Lester: 10914
Dim.:
For:
Note:
Ref:
66-85106
Contact
Lester: 10914
Dim.: 8.7mm ID, 1.5mm Thick,
14mmW x 11.5mmL
For:
Note:
Ref:
Manufacturers and Supplier names and their part numbers are for reference use only.
12
No Photo
Available
Mitsuba PMGR Parts
69-85105
37
69-85100
Brush Holder Assy
Lester: 17816, 17844, 17870,
17959
Dim.: 71.5mm OD, 8mm B+
For: SM612
Note:
Ref: 69-85200, W505-11,
BH-8363, SH-06114
68-85101
Brush-Field (POS)
Lester: 17870, 17871, 17959,
17960
Dim.: 4.5mmTx12mmWx11.
5mmLx27mmLL
For:
Note: Rivet use 69-85105
Ref: 68-8505, H-05114A
69-85106
Bridge-Brush Holder
Lester: 17870
Dim.:
For:
Note: Plastic material.
Used on 69-85100 Brush Holder.
Ref: SH-06114P
69-85100
68-85102
Brush Holder
(Exploded View)
Brush-Ground (NEG)
Lester: 17870, 17871, 17958,
17959, 17960
Dim.: 4.5mmTx12mmWx11.
5mmLx29mmLL
For:
Note:
Ref: 68-8506, SH-05114B
Lester: 17870
Contents:
66-85101 Contact
84-82164 Contact Bolt
71-82143 Oil-Ring
72-85101 Insulator
76-85004 Snap Ring-Contact
85-82101 Hex Nut
Ref:
No Photo
Available
37 69-85108
Brush Holder Assy
69-85105
Rivet-Brush-Field (POS)
Lester: 17870
Dim.:
For:
Note: Used on 68-85101 BrushField to hold with Brush Holder.
Ref:
Lester: 10914, 10915, 17960 ...
Dim.:
For: SM612
Note:
Ref:
Manufacturers and Supplier names and their part numbers are for reference use only.
13
Mitsuba PMGR Parts
69-85101
Repair Kit-Plunger
Lester: 17959, 17870, 17844,
17816
Dim.:
For:
Components:
66-85102 Contact Disc
66-85103 Plunger
69-85104 Spring
84-89001 Retainer
Ref: SH-08114CK
25
69-85104
Spring-Plunger
Lester: 17870
Dim.: 6.5mm ODx8.8mmL
0.8mm Wire Dia
For:
Note: Used w/66-85103 Plunger
Ref:
69-85102
Spring-Brush Holder
Lester: 17816, 17844, 17870,
17959
Dim.: 0.8mm Wire Dia.
11.5mm x 4.7mm
18mm L
For:
Note: Required 4 pcs in one unit.
Ref:
Manufacturers and Supplier names and their part numbers are for reference use only.
14
Mitsuba PMGR Parts
71-82143
71-85
Oil Ring-Battery Stud
Plug-B+ Term Extension
Lester: 10914, 17870
Dim.: 8mmIDx11.85mmODx2mm
Thickness
For:
Note:
Ref:
Lester: 10914
Dim.: for 19mm Hole, 7.1mm
Thickness
For: Bubber Material, use w/
Terminal Extension.
Ref:
19 72-85101
Insulator-Battery Stud
Lester: 10914, 17870
Dim.: 16.8mm ID, 27mm OD,
12.5mm Height
For:
Note:
Ref: 66-85401, SH-08114C
71-85101
Seal-Brush Holder
Lester: 17870
Dim.:
For:
Ref:
71-85101
Seal-Brush Holder
72-85102
Lester: 10914
Dim.:
For:
Ref:
Plug-Field Case
Lester: 10914, 17870, 17958.
17960
Dim.:
For:
Note:
Ref:
Manufacturers and Supplier names and their part numbers are for reference use only.
15
Mitsuba PMGR Parts
33 76-85001
Switch Terminal
Lester: 10914, 17958, 17959,
17960, 19009
Dim:
For:
Note:
Ref: 76-85501, W485-176
33
33
76-85
Switch Terminal
Lester: 10914
Dim: M8x1.25, 46.3mm L
For:
Note: Similar to 76-85006, but
opposite side.
Ref:
21
76-85012
Stationary Gear
42 Teeth
Lester: 17816, 17870
Dim: 70.7mm Gear OD
24.5mm Height
For: SM612 Series, for Internal
Thru Bolt use
Note:
Ref: SH-03114 (wo/Plastic)
76-85002
Switch Terminal
Lester: 17814, 17870, 17871,
17901
Dim:
For:
Note:
Ref: W485-185, 76-85500
21
76-85
Stationary Gear
42 Teeth
20
76-85004
Snap Ring-Contact Bolt
33 76-85011
Switch Terminal
Lester: 17816, 17844
Dim:
For:
Note:
Ref: 76-85503
Lester: 17870
Dim.: 16.6mm OD,8.8mm ID
3.7mm Height
For:
Note:
Ref:
24
76-85005
Planetary Gear
16 Teeth
33
76-85006
Terminal Extension
Lester: 17958
Dim: M8 x 1.25
For:
Note:
Ref:
Lester: 10914, 17816, 17870,
17958
Dim: 18.5mm Gear OD
9.1mm T
For: SM612 Series
Note:
Ref: 76-85100, SH-31114G
Lester: 10914
Dim: 70.85mm Gear OD
13.5mm Shaft ID Hole
For:
Note:
Ref:
76-85
Stationary Plate
Lester: 10914
Dim: 41.15mm OD, 13.35mm ID
5.5mm Plate Thickness,
14.35mm Total Thickness
For:
Note:
Ref:
Manufacturers and Supplier names and their part numbers are for reference use only.
16
Mitsuba PMGR Parts
31
31 76-85008
Bracket-CE Plate
76-85003
Bracket-CE Plate
Lester: 17870
Dim.:
For: SM612-09
Note:
Ref: W485-187
31
76-85007
Bracket-CE Plate
Lester: 17816, 17844
Dim.:
For: SM612-05, SM612-06
Note:
Ref:
Lester: 17959
Dim.:
For: SM710-03
Note:
Ref:
31
76-85
Bracket-CE Plate
Lester: 10914
Dim.:
For:
Note:
Ref:
31 76-85009
Bracket-CE Plate
Right Side
Lester: 17958
Dim.:
For: SM710-01
Note:
Ref:
31 76-85010
Bracket-CE Plate
Left Side
Lester: 17958
Dim.:
For: SM710-01
Note:
Ref:
Manufacturers and Supplier names and their part numbers are for reference use only.
17
Mitsuba PMGR Parts
40
41
84-82164
Contact Bolt-Copper
Lester: 17870
Dim: M8 x 1.25 x 26.5mm L
30mm OAL
For:
Note:
Ref:
Photo
Coming
Soon
84-82168
Screw
Phillip Pan Head,
Attached Lock Washer
DE Housing
32
84-82167
Thru Bolt
D.E to C.E. - Internal
Hex Washer Head
84-89001
RetainerSolenoid Contact
For: SM612, SM710 Series
Dim: 3.7mm ID, 12.2mm OD
0.3mm Thickness
Lester: 17816, 17844, 17870,
17871, 17958, 17959, 17960,
19009
Note: Used on 69-85101 Brush
Holder
Ref: 84-8918
Lester: 17816, 17844, 17870,
17871, 17958, 17960, 19009
Dim: M3 x 0.5x6.8mm L
For:
Note:
Ref: 85-1236, MS-3068
Lester: 17870
Dim: M5 x 0.8 x 151mm L
M8 Drive
For:
Note: Also for Delco PG260F2,
PG260L Series PMGR Starters
Ref: 85-135, SO-12711
No Photo
Available
35
84-82
Screw-Diodes
Lester: 17814, 17816, 17844,
17870, 17871, 17901, 17953,
17958, 17959, 17960, 19009
Dim:
For:
Note:
Ref:
32
84-82169
Thru Bolt
D.E to C.E. - External
Hex Washer Head
32
84-82XXX
Thru Bolt
D.E to C.E. - External
Hex Head w/Dog Point
Lester: 17960
Dim: M6 x 1.0 x 95mm L
23mm Thread Length
For:
Note:
Ref:
Lester: 10914
Dim: M6 x 1.0 x 105mm L
110.5mm OAL
24mm Thread Length
For:
Note:
Ref:
85-82101
Hex Nut
Terminal Post
Lester: 17870
Dim: M8 x 1.25 x 6mm T
For:
Note:
Ref:
Manufacturers and Supplier names and their part numbers are for reference use only.
18
1.6kw Unit
17870N
17960N
Starter-Mitsuba PMGR
1.6kw, 12V, 9T, CW
For: Acura, Honda
OE: SM710-02, SM710-05
Lester: 17960
PIC: 191-182, 191-183
Note: Use big Armature. Similar to 19009, but
19009 use external Thru Bolt.
Starter-Mitsuba PMGR
1.6kw, 12V, 9T, CW
For: Acura, Honda
OE: SM612-09
Lester: 17870
PIC: 191-179
Note: used w/AT, for w/MT use 17869N (Mitsubishi
PMGR unit). Use big Armature.
No Photo
Available
17953
17844N
Starter-Mitsuba PMGR
1.6kw, 12V, 9T, CW
For: Honda CRV
OE: SM612-06, SM612-06-3M
Lester: 17844
PIC: 191-177
Note: use big Armature
Starter-Mitsuba PMGR
1.6kw, 12V, 11T, CW
For: ACURA RDX 2.3L TURBO 2007-08
OE: SM710-06
Lester: 17953
PIC: 191-189
Note: use big Armature.
Manufacturers and Supplier names and their part numbers are for reference use only.
19
1.6kw Unit
19009N
Starter-Mitsuba PMGR
1.6kw, 12V, 9T, CW
For: HONDA CR-V 2.4L 2007-09
OE: SM710-07
Lester: 19009
PIC: 191-191
Note: Use big Armature. Similar to 17960, but
17960 use internal Thru Bolt.
No Photo
Available
10914
Starter-Mitsuba PMGR
1.6kw, 12V, 9T, CW
For: Honda Accord L4 2.4L 2013-2016 ,
Honda CR-V L4 2.4L 2015-2016
OE: SM740-09
Lester: 10914
PIC: 191-711
Note:
Manufacturers and Supplier names and their part numbers are for reference use only.
20
1.2kw Unit
17816N
Starter-Mitsuba PMGR
1.2kw, 12V, 9T, CW
For: Acura, Honda
OE: SM612-05, SM612-10
Lester: 17816
PIC: 191-178, 191-187
Note: use small Armature.
17958N
Starter-Mitsuba PMGR
1.2kw, 12V, 9T, CW
For: Honda
OE: SM710-01
Lester: 17958
PIC: 191-186
Note: used w/AT, for w/MT use 17957 (Denso
PMGR unit). Use small Armature.
Manufacturers and Supplier names and their part numbers are for reference use only.
21
1.0kw Unit
No Photo
Available
No Photo
Available
17959N
17871
Starter-Mitsuba PMGR
1.0kw, 12V, 9T, CW
For: HONDA CIVIC HYBRID 1.3L 2006-08
OE: SM710-03
Lester: 17959
PIC: 191-185
Note:
Starter-Mitsuba PMGR
1.0kw, 12V, 9T, CCW
For: HONDA CIVIC HYBRID 1.3L 2003-05
OE: SM612-08
Lester: 17871
PIC: 191-180
Note:
No Photo
Available
No Photo
Available
17814N
17901
Starter-Mitsuba PMGR
1.0kw, 12V, 9T,C CW
For: HONDA INSIGHT 2000-01
OE: SM612-02
Lester: 17814
PIC: 191-123
Note:
Starter-Mitsuba PMGR
1.0kw, 12V, 9T, CCW
For: HONDA Insight 1.0L 2002-06
OE: SM612-07
Lester: 17901
PIC: 191-123A
Note:
Manufacturers and Supplier names and their part numbers are for reference use only.
22
Mitsuba 17870 Starter Tech
Highly Improved and Enhanced by Metro
1.Capable of 1.6kw torque.
2.Drive slides freely and easily to the right position.
3.Durable Armature for 8000-times runs.
4.Heat and cold resistant with high quality grease.
ARMATURE
Metro made Armature is equally the same to original one, so our Armature has a good heat-dissipation and does not get burned. Unlike the after
market ones, the windings cheaply done against
the original design just for reducing the cost.
after market
design
OE type
Metro
new design
69-85100
BRUSH HOLDER
Its material is the same as original’s which is the
high quality of heat-resistant.
54-85501
DRIVE
The spring has been approved and is very elastic.
The Drive meets the standard specification.
76-85012A
STATIONARY GEAR
Metro use iron, this is different from plastic used
by other manufacturers. Obviously our product is
more durable.
old design
plastic
66-85104
SOLENOID-MAGNETIC COIL
The magnetic coil is a crucial part of this starter.
The magnet is stronger than the original, can deliver more power after we re-made and re-designed it.
Manufacturers and Supplier names and their part numbers are for reference use only.
23
Metro new design
steel
Metro Auto Industrial Inc.
2128 Pomona Boulevard . Pomona . CA 91768-3332
Phone:(909)629-2700 . Fax:(909)629-2721
Toll Free:1-800-263-8761
Toll Free Fax:1-800-799-0838
www.metroautoinc.com
Techincal
[email protected]
Information [email protected]
Care is taken to ensure the accuracy of photo, descriptions and applications of each items,
but Metro Auto Industrial Inc. assumes no responsibility for possible errors.
All the OE number and Lester number are for referece use only.
24