Make-Up
Packaging Solutions
Shapes of Colors | 2
Index
Packaging solutions:
Lip Gloss & LipstickPag. 60
Make-Up Stick & Chubby Pag. 15
EyelinerPag. 19
Compact Case & Palette
Pag. 24
Make-Up Accessories
Pag. 33
Loose Powder Jar
Pag. 34
Glass & Plastic Jar Pag. 38
Airless SystemPag. 44
Glass Bottle Pag. 50
Plastic Bottle & Tottle
Pag. 59
Plastic Tube & Dual
Pag. 63
Shapes of Colors | 4
Creating & Designing
Cosmetic Packaging Solutions Since 1975.
CERTIFICATIONS
MANUFACTURING LINES (IN HOUSE)
Lumson Headquarters and both its manufacturing
Injection Molding, Blow Molding,
sites in Capergnanica (CR) and in S.Maria di Sala (VE)
Injection/Blow Molding, Assembling,
are certified UNI EN ISO 9001:2008.
Dispensing Systems and Pumps, Spray coloring,
Lumson Headquarter and the manufacturing site
Screen Printing on Glass, Hot stamping on Glass,
in Capergnanica (CR) are certified UNI EN ISO 14001.
Screen Printing on Plastic, Hot stamping on Plastic,
Tampo Printing.
QUALITY CONTROL
UNI EN ISO
9001:2008
14001:2004
All production processes are continuously
monitored by Lumson Q. C. Dept. to verify
they meet Lumson’s quality standards.
RESEARCH & DEVELOPMENT
BOTTLES & JARS
Lumson Design Team
Airless with Glass bottles, Airless with Plastic bottles,
creates new packaging collections according
Plastic bottles, Glass bottles, Glass jars.
to the latest Design and Fashion trends
or to the rising market needs.
DISPENSING SYSTEMS
Airless Systems, Cosmetic Pumps, Cosmetic dispensers,
Lumson Technical Dept.
Droppers, Dispensing caps, Flip tops.
develops the ideas using the latest technologies
and a high level of innovation.
ACCESSORIES
Covers, Overcaps, Screw caps, High Sealing Gaskets,
Lumson Validation Dept.
Cosmetic accessories.
checks, tests and validates every single item,
to ensure they are made and manufactured
DECORATIONS
according to Lumson’s standards.
Screen printing, Tampo printing, Hot stamping,
Water based spray coloring, UV spray coloring,
MANUFACTURING
UV Metallization, Traditional Metallization,
Lumson uses the latest technologies and advanced
Special unique decorations,
machinery to ensure a perfect manufacturing process.
Photoengraving relief on Plastic Bottles.
Shapes of Colors | 6
Lip Gloss & Lipstick
Packaging Solutions
Lip Gloss
Sophia 7,4 ml
MADE LUMSON
A packaging made of 2 bottles, put one into the other.
Nice and precious look with a thick profile and base.
A beautiful collar/ring and a perfect onebody cap that can be colored,
metallized or hot stamped, making the Sophia the ideal packaging
solution for every kind of lip gloss product.
MATERIALS:
Outside Bottle = MS RESIN
Inside Bottle = PCTG
Ring = ABS
Cap =ABS
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Screen Printing, Hot Stamping.
Different available Applicators.
Lip Gloss
Sophia LED 7,4 ml
MADE LUMSON
A packaging made of 2 bottles, put one into the other.
Nice and precious look with a thick profile and base.
The inside bottle is engraved as standard version.
More engravings are available on request.
MATERIALS:
Outside Bottle = MS RESIN
Inside Bottle = PETG
Ring = ABS
Cap =ABS
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Screen Printing, Hot Stamping.
Different available Applicators.
Shapes of Colors | 8
Lip Gloss
Scarlett 3,4 ml
MADE LUMSON
A cylindrical packaging made of a thick profile bottle, and a perfect
onebody cap with a rounded top, that can be preciously decorated.
Scarlett is a classic packaging solution for every kind of lip gloss
product.
MATERIALS:
Bottle = SAN
Cap = ABS
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing, Hot Stamping.
Different available Applicators.
Lip Gloss
Rouge 5 ml
MADE LUMSON
Rouge is the new elegant and feminine solution perfect for liquid
lipisticks and any other lip gloss formulas.
A fusion of two bottles, both with a slanted profile, confers to this
packaging a peculiar dressy look.
MATERIALS:
Outside Bottle = PETG
Inside Bottle = PCTG
Ring = ABS
Cap = ABS
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Screen Printing, Hot Stamping.
Different available Applicators.
Lip Gloss
Brigitte 4,1 ml
Round bottle with a thick bottom, peculiar for its simple but elegant
feature.
Brigitte is a lovely and precious packaging solution for every kind of
lip gloss product.
MATERIALS:
Bottle = PCTA
Cap = ABS/SAN
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Screen Printing, Hot Stamping.
Different available Applicators.
Lip Gloss
Megan 6,2 - 9 ml
A slender and cylindrical lip gloss packaging available in two sizes
and suitable for any type of lip product.
MATERIALS:
Bottle = PET
Cap =ABS/SAN
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Hot Stamping.
Different available Applicators.
Shapes of Colors | 10
Lip Gloss
Julia 4,5 - 7,6 ml
A lip gloss packaging unique for its original cap shape, Julia is
suitable for any kind of lip product.
MATERIALS:
Bottle = PCTG
Cap =ABS/ SAN
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Screen Printing,
Hot Stamping, Spraying.
Different available Applicators.
Lip Gloss
Marilyn 6,6 - 9,2 ml
An original lip gloss packaging oval shaped with a beautiful
collar that can be separately decorated, and a cap available
in Plastic or Aluminum overshelled.
MATERIALS:
Bottle = PCTG
Collar = PCTG
Cap = ABS/SAN or ALUMINUM OVERSHELLED
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Screen Printing, Hot Stamping.
Different available Applicators.
Lip Gloss
Kate 3,8 - 7 ml
The Lip Glosses Kate have an elegant and flat shape, perfect to be
carried around for the “Woman on the Go” concept.
This packaging solution is now available in two versions:
LIP GLOSS KATE 3,8 - LIP GLOSS KATE 7
MATERIALS:
Bottle = SAN
Ring = ABS
Cap = ABS
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing, Hot Stamping.
Different available Applicators.
Lip Gloss
Liv 5 - 7,4 ml
A square bottle with a collar, that can be separately decorated,
available in different sizes.
A classic solution for any kind of lip product.
Available Sizes: 5 ml - 7.4 ml
MATERIALS:
Liv 5 ml
Liv 7,4 ml
Bottle = PCTA
Bottle = PCTG
Ring = PCTA
Collar = PCTG
Cap = ABS/SAN
Cap = SAN
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Screen Printing, Hot Stamping.
Different available Applicators.
Shapes of Colors | 12
Lip Gloss
Keira 4,3 - 5,2 ml
Square bottle and square cap with gentle rounded corners make
Keira an original packaging for any lip gloss product.
MATERIALS:
Keira 4,3 ml
Keira 5,2 ml
Bottle = SAN
Bottle = PET
Cap = SAN
Cap = SAN
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Screen Printing, Hot Stamping.
Different available Applicators.
Lipstick
Sophia 12,7 mm
With a cylindrical and elegant shape, the Lipstick Sophia is an original
pack with a clear window on the top of the cap to show the different
nuances inside, a collar/ring, and an internal sleeve in aluminum: all
items can be separately decorated.
Available with 12.7 mm diameter and with/or without an extra
“weight”placed inside the base, Sophia is a “Top Class” packaging
solution for every lip product.
MATERIALS:
Base = ABS
Collar = ABS
Cap =ABS
Lens = PMMA
Internal Sleeve = ALUMINUM
Cup = POM
Extra Weight (inside the base): 7 gr
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing,
Tampo Printing, Hot Stamping.
WITH
MAGNETIC
CLOSURE
Lipstick Brigitte
12,7 mm
An aluminium overshelled packaging with magnetic closure for
an high-end positioning of any lipstick product.
MATERIALS:
Base = SAN + ALUMINUM OVERSHELLED
Cap = ABS + ALUMINUM OVERSHELLED
Internal Sleeve = ALUMINUM
Cup = ABS
AVAILABLE DECORATIONS:
Silver/Gold/Black Aluminum, Screen Printing.
Lipstick Brigitte
Bombé 12,7 mm
With a cylindrical and slightly convex shape, a comfortable magnetic
closure, an internal sleeve in aluminum, and a onebody design, the
Lipstick Brigitte Bombé is a prestigious packaging solution for lip
products.
MATERIALS:
Base = ABS
Cap = ABS
Internal Sleeve = ALUMINUM
Cup = POM
AVAILABLE DECORATIONS:
Mass Coloring, Spraying, Screen Printing, Hot Stamping.
Shapes of Colors | 14
WITH
MAGNETIC
CLOSURE
Make-Up Stick & Chubby
Packaging Solutions
Make-Up Stick
Julia 14 ml *
With a cylindrical and extralarge shape, the make-up Stick Julia is
a comfortable, ergonomical and easy-to-use packaging solution
perfectly suitable for foundations and blushes.
The Make-Up Stick Julia is made of a body/shell with a cup inside,
a twisting Base, and an Overcap.
MATERIALS:
Base = PP
Body/Shell = PP
Overcap = PP
Protection snap on Cap = PP
Cup = POM
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing,
Hot Stamping.
*Be Careful: indicated size is subject to small variation according
to filling product.
Make-Up Stick
Megan 7,5 ml
With a cylindrical and large shape, the make-up Stick Megan is a
comfortable, ergonomical, easy-to-use packaging solution perfectly
suitable for blushes, and concealer sticks.
The Make-Up Stick Megan is made of a body/shell with a cup inside,
a twisting base, and an overcap.
MATERIALS:
Base = ABS/SAN
Body/Shell = ABS/SAN
Overcap = ABS/SAN
Cup = POM
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing,
Hot Stamping.
Shapes of Colors | 16
Chubby Stick
Julia 2,4 ml
Another cylindrical and small packaging solution for different kind
of make-up products, as: lipsticks, lip balms, eyeshadows,
concealers, etc.
The Chubby Stick Julia is made of a plastic body with a cup inside,
a plastic twisting base and a plastic cap.
Each component can be separately decorated.
MATERIALS:
Body = ABS
Twisting Base = ABS
Cap = PETG
Cup = POM
AVAILABLE DECORATIONS:
Mass Coloring, Spraying, Screen Printing, Hot Stamping.
Chubby Stick
Brigitte 3,3 ml
With a cylindrical and elegant shape, the Chubby Stick is the perfect
packaging solution for different kind of make-up products,
as: lipsticks, lip balms, eyeshadows, concealers, etc.
The Chubby Stick Brigitte is made of a plastic body with a cup inside,
a plastic or aluminium twisting base and a plastic cap.
Each component can be separately decorated.
MATERIALS:
Body = ABS + SAN
Twisting Base = ABS + SAN
Twisting Base = ABS + ALUMINUM OVERSHELLED
Cap = ABS
Cup = POM
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing,
Hot Stamping.
Chubby Stick
Brigitte 1,2 ml
With a cylindrical and slender shape, the Stick is the perfect packaging
solution to give defined and precise lines to different kind of make-up
products, as lipsticks, lip liners, eyeshadows, concealers etc.
The Stick Brigitte is made of a plastic body with a cup inside, a plastic
twisting base and a plastic cap.
Each component can be separately decorated.
MATERIALS:
Body = ABS +SAN
Twisting Base= ABS + SAN
Cap = PP
Cup = POM
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing,
Hot Stamping.
Shapes of Colors | 18
Eyeliner
Packaging Solutions
Eyeliner
Brigitte 3 ml
A new elegant and feminine packaging suitable for poured,
gel and creamy solutions. This packaging is peculiar for its
handle with brush.
Simply snap off the handle from the cap in order to use the
brush applicator.
MATERIALS:
Jar = SAN
Cap = ABS + SAN
Gasket = PE
Brush Holder = ALUMINUM
AVAILABLE APPLICATORS:
Brush = NYLON
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing,
Hot Stamping.
Eyeliner
Julia 3 ml
The Eyeliner Julia is perfect for liquid formulas and it recalls the old
inkpots. The felt tip and the wiper, inside the bottle, guarantee a
precise and clear application.
MATERIALS:
Bottle = PET
Cap = ABS + SAN
AVAILABLE APPLICATORS:
Brush = PBT
Felt Tip = NYLON
AVAILABLE DECORATIONS:
Mass Coloring, Screen Printing, Hot Stamping.
Shapes of Colors | 20
Eyeliner
Kate 3 ml
The Eyeliner Kate is perfect for liquid formulas.
The bottle has a conical shape with a slender cap, that gives to this
packaging an elegant look. The felt tip/brush and the wiper, inside
the bottle, guarantee a precise and clear application.
MATERIALS:
Bottle = PETG
Cap = ABS + SAN
AVAILABLE APPLICATORS:
Brush = PBT
Felt Tip = NYLON
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying,
Screen Printing, Hot Stamping.
Eyeliner
Kate Bombé 3,5 ml
The domed shape with a slender cap makes this packaging simply
elegant. The felt tip/brush and the wiper, inside the bottle, guarantee
a precise and clear application.
MATERIALS:
Bottle = PETG
Cap = ABS + SAN
AVAILABLE APPLICATORS:
Brush = PBT
Felt Tip = NYLON
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing,
Hot Stamping.
Eyeliner
Megan Short Cap 3 ml
Suitable for liquid solutions, the Eyeliner Megan is introduced with a
cilyndrical and classic shape.
The Eyeliner Megan Short Cap is the classic one, a simple but elegant
packaging, with a “small” cap.
MATERIALS:
Bottle = PET
Cap = SAN
AVAILABLE APPLICATORS:
Brush = PBT
Felt Tip = NYLON
Flocked Tip = NYLON + SILICONE
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing,
Hot Stamping.
Eyeliner
Megan Long Cap 3 ml
Suitable for liquid solutions, the Eyeliner Megan is introduced with
a cilyndrical and classic shape. The Eyeliner Megan Long Cap is
peculiar for its cap, giving a slender and slim look.
MATERIALS:
Bottle = PET
Cap = SAN
AVAILABLE APPLICATORS:
Brush = PBT
Felt Tip = NYLON
Flocked Tip = NYLON + SILICONE
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying,
Screen Printing, Hot Stamping.
Shapes of Colors | 22
Eyeliner
Keira 5 ml
The Eyeliner Keira is perfect for liquid formulas.
This elegant packaging has a square shape with rounded edges.
The felt tip guarnatees a precise and clear application.
MATERIALS:
Bottle = PETG
Cap = ABS + SAN
AVAILABLE APPLICATORS:
Felt Tip = NYLON
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing,
Hot Stamping.
Shapes of Colors | 24
Compact Case & Palette
Packaging Solutions
Compact Sophia
A round and flat shaped Compact Case, with a framed
window, Sophia is the perfect packaging solution for
pressed powders, and/or poured formulas.
The Compact Case is available in different diameters/sizes
with different bases and inner trays.
The Compact Case Sophia also comes with a “WET & DRY”
version (with an inside slot to place a make-up sponge).
AVAILABLE DIAMETERS:
30.9 mm - 36.1 mm - 36.6 mm - 37.3 mm
48 mm - 58.5 mm - 59 mm - 59.7 mm
Wet & Dry version: 59 mm - 59.7 mm
MATERIALS:
Base and Frame = PMMA or ABS + SAN
Cover = PMMA or ABS + SAN
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing,
Hot Stamping.
Wide range of applicators are available on request.
WITH
MAGNETIC
CLOSURE
Compact Sophia
with Magnet
A round flat shaped Compact Case, with window and a
magnetic closure.
The Sophia Magnet is the perfect solution for pressed
powders.
AVAILABLE DIAMETERS:
43,3 mm - 55 mm
MATERIALS:
Window = PCTA
Base and Frame = ABS
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing,
Hot Stamping.
Wide range of applicators are available on request.
Shapes of Colors | 26
Compact Luxea
MADE INVISIBLE
MAGNET
LUMSON
Compact Luxea is the new synonym of beauty, thanks to
its flat shapes and an extra elegant look. Moreover this
packaging is also handy, for its easy to open groove and
an invisible magnet.
Compact Luxea will make your pressed powders or poured
formulas really stand out.
AVAILABLE DIAMETERS:
with window = 36.6 mm - 37.3 mm
with mirror = 59 mm - 59.7 mm
MATERIALS:
Base = ABS + SAN
Cover = ABS + SAN
Frame = ABS + SAN
Window = SAN
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing,
Hot Stamping.
Wide range of applicators are available on request.
Compact Brigitte
A round shaped Compact Case suitable for pressed
powders and poured products, available in
different
diameters, with different bases and inner trays, with or
without mirror.
WThe Compact Case Brigitte also comes in a “WET & DRY”
version (with an additional space for make-up sponge).
AVAILABLE DIAMETERS:
30.9 mm - 36.1 mm - 36.6 mm - 37.3 mm - 42.1 mm - 46.7 mm
48 mm - 58.5 mm - 59 mm - 59.7 mm - 80.4 mm
Wet & Dry version: 59 mm - 59.7 mm
MATERIALS:
Base = PMMA or ABS + SAN
Cover = PMMA or ABS + SAN
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing,
Hot Stamping.
Wide range of applicators are available on request.
Compact Megan
A round and flat shaped Compact Case, with an high cover,
Megan is the perfect packaging solution for baked and
pressed powders.
The Compact Case is available in different diameters/sizes
with different bases and inner trays.
AVAILABLE DIAMETERS:
36.6 mm - 37.3 mm - 42.1 mm - 46.7 mm - 48 mm
58.5 mm - 59 mm - 59.7 mm
MATERIALS:
Base = PMMA or ABS + SAN
Cover = PMMA or ABS + SAN
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing,
Hot Stamping.
Wide range of applicators are available on request.
Compact Scarlett
A classic compact with a dome shaped cover that makes
it perfect for baked products, but also suitable for press
powders and poured formulas.
The Compact case Scarlett is available in different
diameters/sizes, with different bases and inner trays.
AVAILABLE DIAMETERS:
30.9 mm - 36.1 mm - 36.6 mm - 37.3 mm - 42.1 mm - 59 mm
- 59.7 mm - 80.4 mm
MATERIALS:
Base = PMMA or ABS + SAN
Cover = PMMA or ABS + SAN
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing,
Tampo Printing, Hot Stamping.
Wide range of applicators are available on request.
Shapes of Colors | 28
Compact Liv
A square and flat shaped Compact available in 5 different sizes
suitable for press powders and poured products.
The Compact Case Liv is available with or without framed cover,
with different bases and inner trays, and with or without mirror
inside.
For baked powders, the Compact Case Liv is also available with
framed window or with a special higher cover.
AVAILABLE SIZES:
XS-Extra Small (27.4x27.4)
S-Small (38.4x38.4)
M-Medium (47x47)
L-Large (56x56)
L-Wet & Dry version (56x56)
XL-Extra Large (71.6x72.6) with diam. 59 mm.
MATERIALS:
Base = PMMA or ABS + SAN
Cover = PMMA or ABS + SAN.
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing,
Hot Stamping.
Wide range of applicators are available on request.
Compact
Liv Coffret
A square and flat shaped Compact, available with a
unique design. The Compact Case Liv Coffret is a lovely
choice for pressed powder products.
AVAILABLE SIZES:
L-Large (56x56)
MATERIALS:
Base = PMMA or ABS + SAN
Cover = PMMA or ABS + SAN
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing,
Hot Stamping.
Wide range of applicators are available on request.
Compact
Liv Wave
A square and flat shaped Compact available with a unique
closure.
The Compact Case Liv Wave is an original choice for
pressed powders.
AVAILABLE SIZES:
L-Large (56x56)
MATERIALS:
Base = PMMA or ABS + SAN
Cover = PMMA or ABS + SAN
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing,
Hot Stamping.
Wide range of applicators are available on request.
Compact Greta
A Rectangular Compact with rounded profiles, available in a single size
only but with different inner trays. The Compact Case Greta is available
with a wide range of different covers and inner trays and it is suitable for
baked powders, press powders and poured products.
AVAILABLE INNER TRAYS:
- Single rounded position Ø36 + horizontal position for applicator
- Single rounded position Ø42 + horizontal position for applicator
- Single squared position 37X37 + horizontal position for applicator
- Single squared position 38X38 + horizontal position for applicator
- Double rounded position Ø20 + vertical position for applicator
- Double squared position 20x20 + vertical position for applicator
Shapes of Colors | 30
AVAILABLE COVERS:
- Single piece cover with mirror inside
- Single piece high cover for baked products
- Cover with frame, squared window and mirror inside
- Cover with frame, rounded window and mirror inside
MATERIALS:
Base and Frame = ABS + SAN
Cover = ABS + SAN
High Cover for baked = PMMA
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing, Hot Stamping.
Wide range of applicators are available on request.
Compact Shell Kit
A Compact Case of the “Woman on the Go” concept.
The Shell Kit is a compact case with flawless features, ideal solution
to be carried around in every woman’s handbag.
This compact has three positions for pressed powders, a dedicated
space for mirror, and special holder for applicators and accessories:
tweezer, sponge, and brush.
MATERIALS:
Base = ABS + SAN
Inner Tray =ABS+ SAN
Front Button =ABS + SAN
Cover = SAN,
Brush Holder = PP
Mirror = Glass
Tweezer = Steel
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing,
Hot Stamping.
Applicators are delivered protected by a plastic bag.
Palette Liv
The Palette LIV is a lovely packaging solution for pressed powders
or poured products.
AVAILABLE SIZES:
Available with 3 different inserts.
2 rectangular positions 47,5 x 52,2 mm
5 rectangular positions (1 pos. 47,5 x 52,2 mm + 4 positions 22,7 x 25,1 mm)
8 rectangular positions 25,1 x 22,7 mm
MATERIALS:
Base = ABS + SAN
Cover = ABS + SAN
Insert = ABS + SAN
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing, Hot Stamping.
Wide range of applicators are available on request.
Palette Kate
An elegant and slim packaging for eye color make-up and color cosmetics.
AVAILABLE SIZES:
This palette can be customized with different inner sizes of positions
and designs.
MATERIALS:
Base = ABS + SAN
Cover = ABS + SAN
Inserts = ABS + SAN
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing,
Hot Stamping.
Wide range of applicators are available on request.
Shapes of Colors | 32
Make-Up Accessories
Lumson provides a wide range of make-up accessories to fullfil your needs
and to find the perfect applicator solutions for your formulas.
Shapes of Colors | 34
Loose Powder Jar
Packaging Solutions
Loose Powder Jars
Scarlett
Be Careful: indicated sizes refer to pack completed with our standard
sifter. Size may change if using different sifter (on request) or according
to powder density.
MATERIALS:
Jar = SAN
The jars have a neutral sifter and a cover with rounded corners just like
Sifter = PP
the other packs of the Scarlett Collection. The jars can be delivered
Sticky Film = PET.
with a “sticky film” on the sifter, easily removable by final client before
Cover 5ml – 8ml = ABS + SAN
using.
Cover 20 ml – 30 ml – 49 ml = ABS
AVAILABLE SIZES:
AVAILABLE DECORATIONS:
5 ml – 8 ml – 20 ml – 30 ml – 49 ml
Mass Coloring, Screen Printing, Hot Stamping.
Loose Powder Jars
Brigitte
The jars have a thick base and are available in 2 sizes:
Small and Large.
The jars can be delivered with a “sticky film” on the sifter, easily
removable by final client before using.
AVAILABLE SIZES:
SMALL = 10 ml
LARGE = 20 ml
MATERIALS:
Jar = PMMA
Sifter = PP
Sticky Film = APET or PVC
Cover = PMMA
AVAILABLE DECORATIONS:
Mass Coloring, Screen Printing, Hot Stamping.
Shapes of Colors | 36
Loose Powder Jars
Julia
The jars have a thick base and a onebody cover, and are available
in 2 sizes. The jars can be delivered with a “sticky film” on the sifter,
easily removable by final client before using.
AVAILABLE SIZES:
15 ml – 30 ml
MATERIALS:
Jar = PMMA
Sifter = PP
Sticky Film = PVC
Cover = ABS + SAN
AVAILABLE DECORATIONS:
Mass Coloring, Spraying, Screen Printing,
Hot Stamping.
Loose Powder Jar
Brigitte Handle
Applicator 17 ml
An original version of the Loose Powders Jar Brigitte.
Unlike the standard jars, this innovative packaging stands out for
its ergonomic handle applicator, which includes a high sponge
inserted in the cap, to assure an easy and comfortable use.
The sifter is placed inside the collar with a spiral shape to ensure
a controlled dosage of the product.
MATERIALS:
Jar = SAN
Sticky Film = PET (on request only)
Screw Cap = ABS + SAN
Handle= ABS + SAN
Sponge = LATEX NBR
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing,
Hot Stamping.
Colored Pearls Jar
Brigitte Handle
Applicator 25 ml
The Colored Pearl Jar Brigitte (CPJ) is designed and developed
for colored powder pearls. The jar comes with an innovative and
ergonomic handle applicator, which includes an high sponge
inserted inside, to assure an easy and comfortable use.
The jars can be delivered with a Protection Disc, easily removable
by final client before using, placed between the colored pearls and
a latex sponge.
The Protection Disc and the sponge are strongly recommended
to keep the pearls in place and to avoid damage due to rubbing.
MATERIALS:
Jar = SAN
Protection Disc = PE (on request only)
Screw Cap = ABS + SAN
Handle= ABS + SAN
Sponge = LATEX SBR
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing,
Hot Stamping.
Refill Brush
8,5 ml
An original solution for loose powders. Refill brush combines, in only
one packaging, both bottle and brush applicator, assuring an easy
and comfortable use.
This packaging guarantees a safe and easy closure, just lift up the
slide to hold the brush in place and put the cap on it.
Once the product is finished, the bottle can be replaced with a refill
that can be separately delivered with a dedicated cover to better
preserve the product.
MATERIALS:
Bottle = SAN
Cap = ABS + SAN
Slide = ABS + SAN
Brush handle = ABS + SAN
Brush = GOAT HAIR
(PBT hair available on request only)
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying,
Screen Printing, Hot Stamping.
Shapes of Colors | 38
Glass & Plastic Jar
Packaging Solutions
Plastic Jars
Keira 3,5 - 8 ml
An elegant squared design with round edges and a thick base,
this packaging is the perfect solution to be carried around for a
“Woman on the go”.
The jars are suitable for all make-up products especially for
eyeshadows, lip balms, lip glosses, etc.
The Plastic Jars Keira have a inner insert in PP, that can be separately
colored.
MATERIALS:
Jar = PMMA
Inner Insert = PP
Cover = PMMA + ABS
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying,
Screen Printing, Hot Stamping.
Plastic
Beauty Sphere
A lovely and original packaging for color cosmetic products.
Shaped as a perfect sphere, the plastic pack/jar is available with 1, 2
or 4 positions. Either the top or the bottom of the sphere can be filled
and separetely decorated.
A joyful and funny solution for all types of poured make-up formulas.
Available sizes depend on the number of positions and on filling
choices.
MATERIALS:
Top Half (1 or 2 positions) = PS
Bottom Half (1 or 2 positions) = PS or SAN
AVAILABLE DECORATIONS:
Mass Coloring, Screen Printing, Tampo Printing, Hot Stamping.
Shapes of Colors | 40
Plastic Jar
Brigitte 5 ml
Elegant rounded design and thick base, this packaging is the perfect
solution for poured formulas.
MATERIALS:
Jar = SAN
Cover = ABS
Gasket = PE or PVDC or ALUMINUM + PE
AVAILABLE DECORATIONS:
Mass Coloring, Screen Printing,
Tampo Printing, Hot Stamping.
Jar Blush Mono
Scarlett 5 ml
With an elegant rounded and ergonomic design, it’s the perfect
solution for poured product, with a domed top.
It’s a revolutionary packaging that combines the fast and easy
application together with a professional finishing.
MATERIALS:
Jar = ABS
Base = ABS
Cover = SAN
AVAILABLE DECORATIONS:
Mass Coloring, Metallization, Spraying, Screen Printing,
Tampo Printing, Hot Stamping.
Glass Jar
Norma 15 ml
MADE LUMSON
This jar is available in a conical and elegant shape, and it’s suitable
for liquid and cream solutions.
MATERIALS:
Jar = Glass
Cover Norma 33/400 – Lens = SAN
Cover Norma 33/400 – Underlens = PP
AVAILABLE DECORATIONS:
On the Jar = Spray Coloring, Hot Stamping, Screen Printing.
On the Cover = Mass Coloring, Metallization, Tampo Printing,
Hot Stamping.
Glass Jar
Circus Zero 30 ml
The Zero jar, thanks to its cylindrical large shape, is ideal for
mousse foundation and creamy products.
MATERIALS:
Jar = Glass
Plastic Plate = PP
Cover Colosseum 51/400 = PP
AVAILABLE DECORATIONS:
On the Jar = Screen Printing.
On the Cover = Mass Coloring, Tampo Printing,
Hot Stamping.
Shapes of Colors | 42
Glass Jars
Slim 5 - 7 - 15 - 30 ml
MADE LUMSON
The Glass jars of Collezione Slim are the perfect packaging
solution for any type of make-up product from foundations to
eyeliners, from lip glosses to eyeshadows.
All the jars are available with Lumson’s special “high sealing
gasket” to ensure an air tight closure and to give maximum
protection to highly volatile products and mousses.
AVAILABLE SIZES:
5 ml – 7 ml with neck 35/400;
15 ml with neck 43/400;
30 ml with neck 51/400.
MATERIALS:
Jar = Glass
Covers = PETG
AVAILABLE DECORATIONS:
On the Jar = Spray Coloring, Screen Printing, Hot Stamping.
On the Covers Slim 35/400 – 43/400 – 51/400 = Mass Coloring,
Metallization, Spraying, Screen Printing, Tampo Printing,
Hot Stamping.
Shapes of Colors | 44
Airless System
Packaging Solutions
Airless
TAG355 15 - 30 ml
MADE LUMSON
TAG is the first Airless System with a Glass Bottle. It combines the
beauty of glass with the technical and functional advantages of an
airless packaging. The System works with a totally airless Pouch
placed inside the bottle. The airless Pouch protects the formula from
external agents contamination and allows a considerable reduction
in the use of preservatives.
MATERIALS:
Bottle = Glass
Pump Airless AA355 = PP
Overcap AA355 = PP or SAN
AVAILABLE ACTUATORS:
Smile 223 = PP
Pearl 223 = Copolyester
AVAILABLE DECORATIONS:
On the bottle = “Glass Enhancer” Spray Coloring inside the bottle,
Screen Printing, Hot Stamping.
On the Pump (Dosage: 250 mcl) = Mass Coloring, Metallization.
On the Overcap = Mass Coloring, Metallization.
Airless
TAG De Luxe 15 - 30 ml
MADE LUMSON
TAG De Luxe is the most precious version of TAG: Lumson’s airless
system with a glass bottle. It combines the beauty of a glass bottle
with an extra thick bottom and a perfect glass distribution with the
technical and functional advantages of an airless packaging.
The System works with a totally airless Pouch placed inside the
bottle. The airless Pouch protects the formula from external agents
contamination and allows a considerable reduction in the use of
preservatives.
MATERIALS:
Bottle = Glass
Pump Airless AA355 = PP
Overcap AA355 = PP or SAN
AVAILABLE ACTUATORS:
Smile 223 = PP
Pearl 223 = Copolyester
AVAILABLE DECORATIONS:
On the bottle = “Glass Enhancer” Spray Coloring inside the bottle,
Screen Printing, Hot Stamping.
On the Pump (Dosage: 250 mcl) = Mass Coloring, Metallization.
On the Overcap = Mass Coloring, Metallization.
Shapes of Colors | 46
Airless
TAG Luxea 30 ml
MADE LUMSON
TAG Luxea is a slender and elegant version of Lumson’s TAG:
the airless system with a glass bottle. It combines the beauty of a
new design glass bottle with the technical advantages of an airless
system. The System works with a totally airless Pouch placed inside
the bottle. The airless Pouch protects the formula from external
agents contamination and allows a considerable reduction in the use
of preservatives.
MATERIALS:
Bottle = Glass
Pump Airless Luxea = PP
Overcap Luxea 336 = SAN
AVAILABLE ACTUATORS:
Smile 223 = PP
Pearl 223 = Copolyester
AVAILABLE DECORATIONS:
On the bottle = “Glass Enhancer” Spray Coloring
inside the bottle, Screen Printing, Hot Stamping.
On the Pump (Dosage: 250 mcl) = Mass Coloring, Metallization.
On the Overcap = Mass Coloring, Metallization.
Airless
APP355 30 ml
MADE LUMSON
APP is the ultimate plastic airless packaging solution.
Made in thick and bright PETG plastic material, the system works
with a totally airless Pouch placed inside the bottle. The airless
Pouch protects the formula from external agents contamination
and allows a considerable reduction in the use of preservatives.
MATERIALS:
Bottle = PETG
Pump AA355 = PP
Overcap AA355 = PP – SAN
AVAILABLE ACTUATORS:
Smile 223 = PP
Pearl 223 = Copolyester
AVAILABLE DECORATIONS:
On the bottle = Mass Coloring, Spray Coloring inside the bottle,
Screen Printing, Hot Stamping.
On the Pump (Dosage: 250 mcl) = Mass Coloring, Metallization.
On the Overcap = Mass Coloring, Metallization.
Airless
APP355 S 15 - 30 ml
MADE LUMSON
APP 355 S is a slender and newly designed version of Lumson’s APP
System. Made in thick and bright PETG plastic material the system
works with a totally airless Pouch placed inside the bottle. The airless
Pouch protects the formula from external agents contamination and
allows a considerable reduction in the use of preservatives.
MATERIALS:
Bottle = PETG
Pump Airless AA355 = Copolyester
Overcap AA355 = PP or SAN
AVAILABLE DECORATIONS:
On the bottle = Mass Coloring, Screen Printing, Hot Stamping.
On the Pump (Dosage: 250 mcl) = Mass Coloring, Metallization.
On the Overcap = Mass Coloring, Metallization.
Airless
One o One 30 ml
MADE LUMSON
A Plastic airless packaging working with a “piston” system.
The closing system guarantees no opening during and after use.
It can be used at 360° and allows a considerable reduction in the use
of preservatives.
MATERIALS:
Bottle = PP
Pump Airless One o One
Snap On = PP
Overcap One o One = MS RESIN
AVAILABLE DECORATIONS:
On the bottle = Mass Coloring, Screen Printing, Hot Stamping.
On the Pump (Dosage: 230 mcl) = Mass Coloring, Hot Stamping.
On the Overcap = Mass Coloring.
Shapes of Colors | 48
Airless
Stylo 7,5 - 10 - 15 ml
It is a new Airless pen with a “piston” system inside.
The Airless Stylo is the perfect solution for specific treatments,
concealers, base primers for lip/eyes, and other formulas, which need
to be protected from external agents contamination or to reduce the
use of preservatives.
MATERIALS:
Pen = PP + PE
Pump Airless Stylo Bec = PP
Pump Airless Stylo Tendril = PP
Overcap Stylo Bec = PP
Overcap Stylo Tendril = PP
AVAILABLE ACTUATORS:
Stylo Tendril = PP
Stylo Bec = PP
AVAILABLE DECORATIONS:
On the pen = Mass Coloring, Screen Printing, Hot Stamping.
On the Pumps (Dosage: 230 mcl) = Mass Coloring, Hot Stamping.
On the Overcaps = Mass Coloring, Hot Stamping.
Shapes of Colors | 50
Glass Bottle
Packaging Solutions
Glass Bottles
Aida 15 - 30 ml
MADE LUMSON
MATERIALS:
Bottle = Glass
Smart Pump Elegant = PP
Overcap Elegant = SAN
AVAILABLE ACTUATOR:
Horizon 152 = PP
DROPPER AB226 WITH WIPER:
Materials: inner part in PP with Aluminum Overshell, Rubber Tip in Nitrile.
The wiper is inserted inside the bottle’s neck to remove product
residue from the pipette.
AVAILABLE DECORATIONS:
On the bottle = Spray Coloring, Screen Printing, Hot Stamping.
On the Pump (Dosage: 250 mcl) = Mass Coloring,
Metallization, Hot Stamping.
On the Overcap = Mass Coloring, Metallization.
On the Dropper = Mass Coloring (inner part - Rubber Tip).
Glass Bottles
Alexandra 30 ml
MADE LUMSON
AVAILABLE SHAPES:
Alexandra Classic – Alexandra 310
MATERIALS:
Bottle = Glass
Smart Pump AB226 = PP or ALUMINUM OVERSHELLED
Overcap AB226 = PP
AVAILABLE ACTUATORS:
Smile 175 = PP
Pearl 175 = Copolyester
DROPPER AB226 WITH WIPER:
Materials: inner part in PP with Aluminum Overshell, Rubber Tip in Nitrile.
The wiper is inserted inside the bottle’s neck to remove product
residue from the pipette.
Alexandra Classic
Shapes of Colors | 52
Alexandra 310
AVAILABLE DECORATIONS:
On the bottle = Spray Coloring, Screen Printing, Hot Stamping.
On the Pump (Dosage: 250- 350 mcl) = Mass Coloring,
Metallization.
On the Overcap = Mass Coloring. Metallization, Hot Stamping.
On the Dropper = Mass Coloring (inner part - Rubber Tip).
Glass Bottle
Carmen 30 ml
MADE LUMSON
MATERIALS:
Bottle = Glass
Smart Pump Carmen = PP
Overcap Carmen = SAN
AVAILABLE ACTUATOR:
Horizon 152 = PP
AVAILABLE DECORATIONS:
On the bottle = Spray Coloring, Screen Printing, Hot Stamping.
On the Pump (Dosage: 250- 350 mcl) = Mass Coloring, Metallization.
On the Overcap = Mass Coloring, Metallization, Hot Stamping.
Glass Bottles
Circus 15 - 30 ml
MADE LUMSON
MATERIALS:
Bottle = Glass
Smart Pump AB226 = PP or ALUMINUM OVERSHELLED
Overcap AB226 = PP
AVAILABLE ACTUATORS:
Smile 175 = PP
Pearl 175 = Copolyester
DROPPER AB226 WITH WIPER:
Materials: inner part in PP with Aluminum Overshell, Rubber Tip in Nitrile.
The wiper is inserted inside the bottle’s neck to remove product
residue from the pipette.
AVAILABLE DECORATIONS:
On the bottle = Spray Coloring, Screen Printing, Hot Stamping.
On the Pump (Dosage: 250- 350 mcl) = Mass Coloring,Metallization.
On the Overcap = Mass Coloring, Metallization, Hot Stamping.
On the Dropper= Mass Coloring (inner part - Rubber Tip).
Glass Bottle
De Luxe 30 ml
MADE LUMSON
MATERIALS:
Bottle = Glass
Smart Pump AB226 = PP or ALUMINUM OVERSHELLED
Overcap AB226 = PP
AVAILABLE ACTUATORS:
Smile 175 = PP
Pearl 175 = Copolyester
DROPPER AB226 WITH WIPER:
Materials: inner part in PP with Aluminum Overshell, Rubber Tip in Nitrile.
The wiper is inserted inside the bottle’s neck to remove product
residue from the pipette.
AVAILABLE DECORATIONS:
On the bottle = Spray Coloring, Screen Printing, Hot Stamping.
On the Pump (Dosage: 250- 350 mcl) = Mass Coloring, Metallization.
On the Overcap = Mass Coloring, Metallization, Hot Stamping.
On the Dropper= Mass Coloring (inner part - Rubber Tip).
Glass Bottle
Columbus 30 ml
MADE LUMSON
MATERIALS:
Bottle = Glass
Smart Pump AB285 = PP
Overcap AB285 = SAN
AVAILABLE ACTUATOR:
Horizon 152 = PP
DROPPER AB226 WITH WIPER:
Materials: inner part in PP with Aluminum Overshell, Rubber Tip in Nitrile.
The wiper is inserted inside the bottle’s neck to remove product
residue from the pipette.
AVAILABLE DECORATIONS:
On the bottle = Spray Coloring, Screen Printing, Hot Stamping.
On the Pump (Dosage: 250- 350 mcl) = Mass Coloring, Metallization.
On the Overcap = Mass Coloring, Metallization, Hot Stamping.
On the Dropper= Mass Coloring (inner part - Rubber Tip).
Shapes of Colors | 54
Glass Bottle
Indy 30 ml
MADE LUMSON
Always delivered with an already assembled Collar in PP.
MATERIALS:
Bottle = Glass
Smart Pump AB226 = PP or ALUMINUM OVERSHELLED
Overcap JOLI = PP
AVAILABLE ACTUATORS:
Smile 175 = PP
Pearl 175 = Copolyester
AVAILABLE DECORATIONS:
On the bottle = Spray Coloring, Screen Printing, Hot Stamping.
On the Pump (Dosage: 250- 350 mcl) = Mass Coloring, Metallization.
On the Overcap = Mass Coloring, Metallization, Hot Stamping.
Glass Bottle
Luxea 30 ml
MADE LUMSON
MATERIALS:
Bottle = Glass
Smart Pump Luxea = PP
Overcap Luxea 312 = SAN
AVAILABLE ACTUATORS:
Smile 175 = PP
Pearl 175 = Copolyester
AVAILABLE DECORATIONS:
On the bottle = Spray Coloring, Screen Printing, Hot Stamping.
On the Pump (Dosage: 250- 350 mcl) = Mass Coloring, Metallization.
On the Overcap = Mass Coloring, Metallization, Hot Stamping.
Glass Bottles
Norma 15 - 30 ml
MADE LUMSON
MATERIALS:
Bottle = Glass
Smart Pump Elegant = PP
Overcap Elegant = SAN
AVAILABLE ACTUATOR:
Horizon 152 = PP
DROPPER AB226 WITH WIPER:
Materials: inner part in PP with Aluminum Overshell, Rubber Tip in Nitrile.
The wiper is inserted inside the bottle’s neck to remove product
residue from the pipette.
AVAILABLE DECORATIONS:
On the bottle = Spray Coloring, Screen Printing, Hot Stamping.
On the Pump (Dosage: 250 mcl) = Mass Coloring, Metallization,
Hot Stamping.
On the Overcap = Mass Coloring, Metallization, Hot Stamping.
On the Dropper= Mass Coloring (inner part - Rubber Tip).
Glass Bottle
Romantica 30 ml
MADE LUMSON
MATERIALS:
Bottle = Glass
Smart Pump AB285 = PP
Overcap AB285 = SAN
AVAILABLE ACTUATOR:
Horizon 152 = PP
DROPPER AB226 WITH WIPER:
Materials: inner part in PP with Aluminum Overshell, Rubber Tip in Nitrile.
The wiper is inserted inside the bottle’s neck to remove product
residue from the pipette.
AVAILABLE DECORATIONS:
On the bottle = Spray Coloring, Screen Printing, Hot Stamping.
On the Pump (Dosage: 250- 350 mcl) = Mass Coloring, Metallization.
On the Overcap = Mass Coloring, Metallization, Hot Stamping.
On the Dropper= Mass Coloring (inner part - Rubber Tip).
Shapes of Colors | 56
Glass Bottle
Silhouette 30 ml
MADE LUMSON
MATERIALS:
Bottle = Glass
Smart Pump AB285 = PP
Overcap AB285 = SAN
AVAILABLE ACTUATOR:
Horizon 152 = PP
DROPPER AB226 WITH WIPER:
Materials: inner part in PP with Aluminum Overshell, Rubber Tip in Nitrile.
The wiper is inserted inside the bottle’s neck to remove product
residue from the pipette.
AVAILABLE DECORATIONS:
On the bottle = Spray Coloring, Screen Printing, Hot Stamping.
On the Pump (Dosage: 250- 350 mcl) = Mass Coloring, Metallization.
On the Overcap = Mass Coloring, Metallization, Hot Stamping.
On the Dropper= Mass Coloring (inner part - Rubber Tip).
Glass Bottle
Simplicité 30 ml
MADE LUMSON
MATERIALS:
Bottle = Glass
Smart Pump AB285 = PP
Available Actuator: Horizon 152 = PP
Available Overcap: Horizon 20/400 = SAN
Smart Pump AB226 = PP or ALUMINUM OVERSHELLED
Available Actuators: Smile 175 = PP
Pearl 175 = Copolyester
Available Overcap: AB226 = PP
AVAILABLE DECORATIONS:
On the bottle = Spray Coloring, Screen Printing, Hot Stamping.
On the Pump (Dosage: 250- 350 mcl) = Mass Coloring,
Metallization.
On the Overcap = Mass Coloring, Metallization, Hot Stamping.
On the Dropper= Mass Coloring (inner part - Rubber Tip).
Glass Bottles
Slim 20 - 30 ml
MADE LUMSON
MATERIALS:
Bottle = Glass
Smart Pump AA302 = PP
Overcap AA302 = SAN
AVAILABLE ACTUATORS:
Horizon 175 = PP
Smile 175 = PP
Pearl 175 = Copolyester
DROPPER 24/410 IN UREA
Neck: 24/410
Material: UREA
AVAILABLE DECORATIONS:
On the bottle = Spray Coloring, Screen Printing, Hot Stamping.
On the Pump (Dosage: 250- 350 mcl) = Mass Coloring,
Metallization.
On the Overcap = Mass Coloring, Metallization, Hot Stamping.
On the Dropper= Mass Coloring; Metallization.
Glass Bottle
Victoria 30 ml
MADE LUMSON
MATERIALS:
Bottle = Glass
Smart Pump AB226 = PP or ALUMINUM OVERSHELLED
Overcap AB226 = PP
AVAILABLE ACTUATORS:
Smile 175 = PP
Pearl 175 = Copolyester
DROPPER AB226 WITH WIPER:
Materials: inner part in PP with Aluminum Overshell, Rubber Tip in Nitrile.
The wiper is inserted inside the bottle’s neck to remove product
residue from the pipette.
AVAILABLE DECORATIONS:
On the bottle = Spray Coloring, Screen Printing, Hot Stamping.
On the Pump (Dosage: 250- 350 mcl) = Mass Coloring,
Metallization.
On the Overcap = Mass Coloring, Metallization, Hot Stamping.
On the Dropper= Mass Coloring (inner part - Rubber Tip).
Shapes of Colors | 58
Plastic Bottle & Tottle
Packaging Solutions
Plastic Bottle
Greta 40 ml
MATERIALS:
Bottle = PE
Screw Cap = PP
Reducer = PP
AVAILABLE DECORATIONS:
On the Bottle = Mass Coloring, Hot Stamping, Screen Printing.
On the Screw Cap = Mass Coloring, Spraying, Metallization.
Plastic Tottle
Kate Bombé 30 ml
MATERIALS:
Bottle = PE
Screw Cap = ABS + SAN
Reducer = PE
AVAILABLE DECORATIONS:
On the Bottle = Mass Coloring, Screen Printing, Hot Stamping.
On the Screw Cap = Mass Coloring, Spraying, Metallization.
Shapes of Colors | 60
Plastic Tottle
Amanda 30 ml
MADE LUMSON
MATERIALS:
Bottle = PE – PE Soft Touch
Screw Cap = PP
AVAILABLE REDUCERS:
2 different reducers/tips available
AVAILABLE DECORATIONS:
On the Bottle = Mass Coloring, Screen Printing, Hot Stamping.
On the Screw Cap = Mass Coloring, Metallization.
Plastic Tottle
Carmen 30 ml
MADE LUMSON
MATERIALS:
Bottle = PE - PE Soft Touch
Screw Cap = PP
AVAILABLE REDUCERS:
2 different reducers/tips available
AVAILABLE DECORATIONS:
On the Bottle = Mass Coloring, Screen Printing, Hot Stamping.
On the Screw Cap = Mass Coloring, Metallization.
Plastic Tottle
Classic 30 ml
MADE LUMSON
The plastic tottle Classic follows the “Woman on the go” concept.
A tottle with a flat and user friendly design, easy to be carried
around.
The tottle is slightly squeezable with a onebody cap and a reducer.
The perfect packaging solution for liquid foundations, primers and
all cosmetic formulas.
MATERIALS:
Bottle = PE - PE Soft Touch
Screw Cap Venus 18/415= PP + SAN
AVAILABLE REDUCERS:
Reducers with different hole diameters are available.
AVAILABLE DECORATIONS:
On the Bottle = Mass Coloring, Tampo Printing, Hot Stamping.
On the Screw Cap = Mass Coloring, Metallization Tampo Printing,
Hot Stamping.
Shapes of Colors | 62
Plastic Tube & Dual
Packaging Solutions
Plastic Tubes
Ophthalmic
Plastic tubes in LDPE with Ophthalmic Tip, available with single or
multilayers plastic according to the barrier effect required.
A Packaging solution suitable for a precise applications.
AVAILABLE SIZES:
Ø 16 = 10 ml (Height 80 mm) - 15 ml (Height 105 mm)
Ø 19 = 10 ml (Height 65 mm) - 15 ml (Height 83 mm)
Ø 25 = 30 ml (Height 94 mm)
Other available sizes (on request): according to the below chart
(screw caps change according to different diameters).
MATERIALS:
Tube = Single or Multilayer
Screw Cap = PP
AVAILABLE SCREW CAPS:
- Screw Cap Round Top
- Screw Cap Flat Top
- Ophthalmic Screw Cap
AVAILABLE DECORATIONS:
On the Tube = Mass Coloring, Screen Printing,
Off-Set Printing.
SIZE
2 ml
3 ml
4 ml
5 ml
5 ml
5 ml
8 ml
8 ml
DIAMETER (mm)
13.5
13.5
13.5
13.5
13.5
16
13.5
16
HEIGHT (mm)
40
48
56
64
64
55
88
70
SIZE
8 ml
20 ml
20 ml
25 ml
35 ml
40 ml
45 ml
50 ml
DIAMETER (mm)
19
19
25
25
25
25
25
25
HEIGHT (mm)
58
101
74
84
104
114
125
134
Airless Tubes
The Airless Tubes have a little valve inside the neck that, after use,
prevents the entrance of the air in the tube.
It is suitable for any formula that needs to be protected.
AVAILABLE SIZES:
15 ml = Ø 22 (Height 72 mm)
30 ml = Ø 22 (Height 111 mm)
30 ml = Ø 25 (Height 94 mm)
50 ml = Ø 25 (Height 134 mm)
Other available sizes (on request): according to the below chart
(screw caps change according to different diameters).
MATERIALS:
Tube = Multilayer
Screw Cap = PP
AVAILABLE DECORATIONS:
On the Tube = Mass Coloring, Screen Printing, Off-Set Printing.
On the Screw Cap = Mass Coloring, Spraying, Hot Stamping.
SIZE DIAMETER (mm) HEIGHT (mm)
20 ml
22
85
20 ml
25
74
25 ml
22
98
25 ml
25
84
35 ml
22
124
Shapes of Colors | 64
SIZE DIAMETER (mm) HEIGHT (mm)
35 ml
25
104
40 ml
25
114
45 ml
25
124
50 ml
25
134
Round Tubes with
Applicators
Round tubes in LDPE available with different types of applicators
including single and triple stainless steel Roll On.
The Round Tubes with applicators are the perfect packaging solution
for all kinds of skin care or make-up products requiring a special or
precise application.
AVAILABLE SIZES:
Ø 16 =10 ml (Height 82 mm) - 15 ml (Height 111 mm).
Ø 19 = 10 ml (Height 65 mm) - 15 ml (Height 85 mm)
Other available sizes (on request): according to the below chart
(screw caps change according to different diameters).
MATERIALS:
Tube = Single or Multilayer
Screw Cap = PP
AVAILABLE APPLICATORS:
Silicone Doe Foot
Single Steel Ball Roll On
Triple Steel Ball Roll On
Other Applicators available on request.
AVAILABLE OVERCAPS:
Flat Top Overcap in PP for Silicone Doe Foot
Single Ball Overcap
Triple Ball Overcap
AVAILABLE DECORATIONS:
On Tube = Mass Coloring, Spraying, Off-Set printing,
Screen printing, Hot Stamping.
On Screw Cap = Mass Coloring, Spraying, Metallization,
Hot Stamping.
SIZE DIAMETER (mm) HEIGHT (mm)
3 ml
13
44
5 ml
13
61
5 ml
16
52
5 ml
19
50
10 ml
13
108
10 ml
22
59
Silicone Doe Foot
SIZE DIAMETER (mm) HEIGHT (mm)
15 ml
22
74
15 ml
25
64
20 ml
19
105
20 ml
22
87
20 ml
25
75
20 ml
30
65
Flat Top Overcap
Single Ball Roll On
Single Ball Roll On Overcap
Triple Balls Roll On
Triple Balls Roll On Overcap
Dual
Jar 30 ml
The Dual Jar is an innovative and ideal solution to contain two
complementary products in a single packaging, such as foundation
and concealer.
The plastic jar has a wiper and a spatula, to guarantee a correct and
clean application of the product.
The screw capsule is actually a compact with an inner tray of 33,5 mm
with mirror. It is perfect for poured or pressed products.
MATERIALS:
Jar = SAN
Capsule = ABS + SAN
AVAILABLE DECORATIONS:
On Jar = Mass Coloring, Spraying, Screen printing, Hot Stamping.
On the Capsule = Mass Coloring, Spraying, Screen Printing, Hot Stamping.
Dual
Tubes 30 - 50 ml
This tube is an innovative solution perfect to combine similar
products, such as foundation and concealer, eye cream and
concealer, etc. The capsule has a compact case inside where
is possible to add a product (poured or press solutions).
By unscrewing the capsula you can find a tube, available in
different sizes, suitable for liquid solutions.
AVAILABLE SIZES:
30 ml = 30 mm X 90 mm
50 ml = 30 mm X 106 mm
MATERIALS:
Tube = Single or Multilayer
Flip Top Cap = PP
AVAILABLE DECORATIONS ON THE TUBE:
On the Tube = Mass Coloring, Screen Printing.
On the Flip Top Cap = Mass Coloring.
Shapes of Colors | 66
LUMSON ITALY - HEADQUARTERS
Via Tesino, 62-64
26010 - Capergnanica (CR)
Tel. +39 0373 2331
Fax +39 0373 23 33 55
LUMSON FRANCE
Tel. +33 (0)4 42 900 360
[email protected]
LUMSON USA
Ph. # +1 (908) 918-1333
[email protected]
LUMSON DEUTSCHLAND
Tel. +49 (0)89 207040-203
[email protected]
LUMSON IBERIA - ESPAÑA
Tel. +34 93 867 63 75
[email protected]
LUMSON UK
Ph. # +44 7971 572958
[email protected]
LUMSON CENTRAL EUROPE - POLAND
Ph. # +48 12 257 13 44
[email protected]
LUMSON RUSSIA
[email protected]
FOR MORE INFO:
www.lumson.com - [email protected]