Pendant Stations
HBA
More than safety.
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles
Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
ManMachine
More than safety.
Around the world – the Swabian
specialists in motion sequence
control for mechanical and systems engineering.
Emil Euchner, the
company’s founder and
inventor of the multiple
limit switch, circa 1928.
EUCHNER’s history began in 1940 with
the establishment of an engineering
office by Emil Euchner. Since that
time, EUCHNER has been involved in
the design and development of switchgear for controlling a wide variety of
motion sequences in mechanical and
systems engineering. In 1953, Emil
Euchner founded EUCHNER + Co., a
milestone in the company’s history. In
1952, he developed the first multiple
limit switch – to this day a symbol of
the enterprising spirit of this familyowned company.
Automation – Safety – ManMachine
Today, our products range from
electromechanical and electronic
components to complex system solutions. With this wide range of products
we can provide the necessary technologies to offer the right solution for
special requirements – regardless of
whether these relate to reliable and
precise positioning or to components
and systems for safety engineering in
the automation sector.
EUCHNER products are sold through a
world-wide sales network of competent partners. With our closeness to
the customer and the guarantee of
reliable solutions throughout the
globe, we enjoy the confidence of customers all over the world.
Quality, reliability, precision
Quality, reliability and precision are the
hallmarks of our corporate philosophy.
They represent concepts and values
to which we feel totally committed.
At EUCHNER, quality means that all
our employees take personal responsibility for the company as a whole
and, in particular, for their own field of
work. This individual commitment to
perfection results in products which
are ideally tailored to the customers’
needs and the requirements of the
market. After all: our customers and
their needs are the focus of all our
efforts. Through efficient and effective
use of resources, the promotion of
personal initiative and courage in finding unusual solutions to the benefit of
our customers, we ensure a high level
of customer satisfaction. We familiarize ourselves with their needs, requirements and products and we learn
from the experiences of our customers’ own customers.
EUCHNER – More than safety.
Quality – made by EUCHNER
2
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
Table of Contents
HBA Hand-Held Pendant Station
General
4
Basic designs of integral devices
5
Hand-held pendant station kit
16
HBA housing without handwheel
18
HBA housing with handwheel
21
Front plate for HBA housing without handwheel
25
Front plate for HBA housing with handwheel
26
EMERGENCY-STOP device with pull release according to EN 418
27
Pushbutton
28
Key-operated rotary switch
28
Selector switch 1 from X
29
Grey code selector switch
30
Rotary knob
31
Plug connector
32
Flange sockets
32
Spiral-shaped and straight 12-pole cable
33
Spiral-shaped and straight 23-pole cable
34
Cable gland with anti-kink spiral
35
Short-circuit plug
35
Connection kit for HBA - 072 910
36
HBA holder
36
HBA hand-held pendant station request form
38
Dimensions HBA top shell with domes
40
Accessories
Appendix
Technical status 02-06/04
3
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
General
EUCHNER hand-held pendant stations are characterized by their
robust plastic housing with high degree of protection IP65, their
multifunctional expandability and ergonomically logical operability.
The hand-held pendant stations have been deployed for many
years in the most diverse applications, especially in rough industrial
environments.
In addition to the conventional properties, the new HBA series
also offers new features, e.g. a flat and convenient design, small
housing dimensions, lighter weight and an attractive design.
Thanks to its flexible configuration, the HBA series is also suitable
for applications in diverse fields, e.g. robotics, controls for machine
tools and assembly lines. A holder is also supplied for stationary
mounting of the hand-held pendant station.
To enable you to use ergonomically designed housings even for
prototypes or special versions, EUCHNER provides a kit for handheld pendant stations. Consequently, you are able to assemble a
hand-held pendant station in a user-friendly housing according to
your requirements.
In order to use these ergonomically designed housings for diverse requirements, EUCHNER offers the option of customized
solutions.
Brillant in rough industrial environments a unique design achievement
HBA hand-held pendant station awarded international
design prize
Within the framework of the Baden-Württemberg International Design Prize 2001, two HBA hand-held pendant stations were
awarded the title „Excellent“.
The success achieved in the competition on the theme „Focus
Mobility“ can be attributed to the device’s flat and convenient form,
reduced weight and the ergonomical and handy design.
Both hand-held pendant stations are absolutely ideal for mobile
deployment in rough industrial environments. Thanks to their robust plastic housing and multifunctional expandability, they can
be employed in various fields, e.g. in robotics or as controls for
machine tools and assembly lines.
4
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
Basic designs of integral devices
HBA - 079 828
HBA - 079 826
HBA - 079 825
HBA - 079 827
HBA - 072 910
HBA holder
5
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
HBA - 079 828
! 2 x 100 pulse handwheel, wear-resistant magnetic latching
! Two enabling switches, 2 stage, one per NO contact
Dimension drawing
∅ 85
67
Mounting
magnet
S2
160
S1
Cable length stretched
3,500 mm
Notes
! HBA holder for hand-held pendant stations,
see Accessories, page 34
! Accompanying 23-pin flange sockets, see
Accessories, page 32
Plug connector
23-pin
Ordering table
Article
HBA - 079 828 hand-held pendant station
6
Order No.
079 828
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
Technical data
Parameters
HBA housing
Material
Color
Operating temperature
Storage temperature
Degree of protection according to EN 60529/NEMA
Connection
Weight
Handwheel
Pulse / Revolution
Distribution voltage
Output specifications
Enabling switch
Switching element
Resistive load
Value
Unit
Plastic (Polycarbonate)
Grey RAL 7040
0 to +50
-20 to +50
IP 65 / 250-12
Spiral cable, expandable to 3.5 m, 23-pin plug connector
approx. 1.3
°C
°C
kg
100
5 ± 5%
RS422A
V DC
1 x No contact
30 V AC / 0.4 A; 30 V DC / 0.1 A
Circuit plan
S1:
Enabling switch left
S2:
Enabling switch right
Handwheel
RS422
A
A
-
B
4
0V
X1/2
ws
0,34²
WH
A
Ground connection
Handwheel
Shield
Shield electr. connected to the handwheel
A
UB:
+5 V +/-5%
X1/1
X2/1
br
BN
B
0,34²
A
X2/3
0,14²
ge
GN
gn
YE
D
C
0,14²
B
B
X2/4
0,14²
rs
GY
E
gr
PK
F
0,34²
bl
BU
G
0,34²
0,34²
RD
H
rt
BK
J
0,34²
VT
K
sw
GYPK
L
vt
RDBU rtbl 0,14²
M
grrs 0,14²
GNWH wsgn 0,14²
N
brgn 0,14²
BNGN
P
wsge 0,14²
YEWH
R
gebr 0,14²
GYWH wsgr 0,14²
BNYE
S
U
not connected *
T
W HP K wsrs 0,14²
BNGY grbr 0,14²
V
BNPK rsbr 0,14²
W
0,14²
BNBU brbl
BUWH wsbl 0,14²
X
RDWH wsrt 0,14²
Y
not connected *
X2/2
3
+24 Volt
3
RS 422 A
S1
0,14²
S2
Z
+
B
4
* can be expanded by adding kit components
7
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
HBA - 079 826
! 2 x 100 pulse handwheel, wear-resistant magnetic latching
! Overload-proof EMERGENCY-STOP according to EN 418, twin
channel
! Two enabling switches, 2 stage, one per NO contact
! 2 selector switches, each 5-fold (X, Y, Z, 4, 5 and 0, 1, 10, 100,
1000)
Dimension drawing
∅ 85
67
S1
S5
S2
S3
Mounting
magnet
160
S4
Notes
Cable length stretched
3,500 mm
! HBA holder for hand-held pendant stations
see Accessories, page 34
! Accompanying 23-pin flange sockets, see
Accessories, page 32
Plug connector
23-pin
Ordering table
Article
HBA - 079 826 hand-held pendant station
8
Order No.
079 826
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
Technical data
Parameters
HBA housing
Material
Color
Operating temperature
Storage temperature
Degree of protection according to EN 60529/NEMA
Connection
Weight
Handwheel
Pulse / Revolution
Distribution voltage
Output specifications
EMERGENCY-STOP
Norm
Switching element
Utilization category according to IEC 60947-5-1
Enabling switch
Switching element
Resistive load
Selector switch
Output code
Maximum switching voltage
Maximum switching current
Maximum switching capacity
Value
Unit
Plastic (Polycarbonate)
Grey RAL 7040
0 to +50
-20 to +50
IP 65 / 250-12
Spiral cable, expandable to 3.5 m, 23-pin plug connector
approx. 1.3
°C
°C
kg
100
5 ± 5%
RS422A
V DC
EN 418
2 x NC contact
DC-13, Ue 24 V, Ie 3 A
1 x No contact
30 V AC / 0.4 A; 30 V DC / 0.1 A
see circuit plan
30
200
1
V DC
mA
W
Circuit plan
DCBA
0000
0
0001
1
0011
10
0010 100
0110 1000
S5
1
2
3
4
5
S4
1
2
3
4
5
S5:
Increment selection
Selector switch right
5 positions
DCBA
0000
0001
0011
0010
0110
x
y
z
4
5
S4:
Axle selection
Selector switch left
5 positions
S2:
Enabling switch left
S3:
Enabling switch right
Handwheel
RS422
S1:
Emergency Stop
A
1
2
1
S5
S4
A
2 S1
B
0V
X1/2
GN
BN
WH
C
B
A
ws
0,34²
A
UB:
+5 V +/-5%
X1/1
0,34²
YE
D
br
A
X2/1
X2/3
0,14²
0,14²
GY
E
ge
PK
F
gn
B
X2/2
B
0,14²
0,34²
BU
G
bl
0,34²
0,34²
rt
RD
L
H
M
0,34²
GYPK
N
sw
RDBU rtbl 0,14²
P
vt
BNGN
GNWH wsgn 0,14²
grrs 0,14²
YEWH
R
VT
gebr 0,14²
BNYE
S
BK
GYWH wsgr 0,14²
T
J
BNGY grbr 0,14²
U
K
W HP K wsrs 0,14²
V
X2/4
+24 Volt
BNPK rsbr 0,14²
W
brgn 0,14²
BUWH wsbl 0,14²
X
wsge 0,14²
BNBU brbl
Y
0,14²
RDWH wsrt 0,14²
0,14²
3
not connected *
RS 422 A
S2
rs
3
1
gr
S3
A
B
1
4
X3/6
C
X3/5
D
X3/2
Z
X3/1
Z
X3/4
X3/3
A
B
X4/6
C
X4/5
D
Gray-Code
X4/2
X4/1
Z
Gray-Code
4
Z
X4/3
5
+
B
5
Ground connection
Handwheel
Shield
Shield electr. connected to the handwheel
RW22,5˚
-
RW22,5˚
* can be expanded by adding kit components
9
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
HBA - 079 825
! 2 x 100 pulse handwheel, wear-resistant magnetic latching
! Overload-proof EMERGENCY-STOP according to EN 418, twin
channel
! Two enabling switches, 2 stage, one per NO contact
! 3 membrane pushbuttons, one per NO contact
Dimension drawing
∅ 85
67
S1
Mounting
magnet
160
S5
S4
S6
S2
S3
Notes
Cable length stretched
3,500 mm
! HBA holder for hand-held pendant stations
see Accessories, page 34
! Accompanying 23-pin flange sockets, see
Accessories, page 32
Plug connector
23-pin
Ordering table
Article
HBA - 079 825 hand-held pendant station
10
Order No.
079 825
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
Technical data
Parameters
HBA housing
Material
Color
Operating temperature
Storage temperature
Degree of protection according to EN 60529/NEMA
Connection
Weight
Handwheel
Pulse / Revolution
Distribution voltage
Output specifications
EMERGENCY-STOP
Norm
Switching element
Utilization category according to IEC 60947-5-1
Enabling switch
Switching element
Resistive load
Pushbutton
Switching elements
Maximum switching voltage
Maximum switching current
Maximum switching capacity
Value
Unit
Plastic (Polycarbonate)
Grey RAL 7040
0 to +50
-20 to +50
IP 65 / 250-12
Spiral cable, expandable to 3.5 m, 23-pin plug connector
approx. 1.3
°C
°C
kg
100
5 ± 5%
RS422A
V DC
EN 418
2 x NC contact
DC-13, Ue 24 V, Ie 3 A
1 x No contact
30 V AC / 0.4 A; 30 V DC / 0.1 A
3 membrane pushbuttons, one per NO contact
30
100
1
V DC
mA
W
Circuit plan
S4:
Push button left
S2:
Enabling switch left
S3:
Enabling switch right
1
0V
X1/2
X1/1
BN
WH
B
A
ws
0,34²
A
UB:
+5 V +/-5%
0,34²
GN
br
X2/3
0,14²
YE
D
C
ge
X2/2
X2/4
0,14²
0,14²
GY
E
rs
PK
F
gr
0,34²
BU
G
bl
0,34²
0,34²
RD
H
rt
BK
J
sw
VT
K
vt
0,34²
X3/5
grrs 0,14²
GYPK
RDBU rtbl 0,14²
M
L
GNWH wsgn 0,14²
N
X3/4
X3/8
BNGN
P
brgn 0,14²
X3/10
wsge 0,14²
YEWH
R
X3/3
gebr 0,14²
BNYE
S
X3/1
GYWH wsgr 0,14²
T
X3/9
X3/7
W HP K wsrs 0,14²
BNGY grbr 0,14²
U
BNPK rsbr 0,14²
W
V
BUWH wsbl 0,14²
X
X4/5
X4/1
BNBU brbl
Y
0,14²
RDWH wsrt 0,14²
Z
X4/7
X4/3
+24 Volt
Connector
PCB
A
RS 422 A
X2/1
RD X5/4
X4/4
B
1
0,14²
BK X5/1
X4/6
B
B
PK X5/3
YE X5/2
X4/8
A
2 S1
Ground connection
Shield
Handwheel
Shield electr. connected to the handwheel
2
3
X4/2
X6/1
X6/2
X6/3
X6/4
3
3
A
S2
+
not connected *
4
S3
-
3
3
4
gn
4 S6 4 S5 4 S4
Handwheel
RS422
S1:
Emergency Stop
B
S5:
Push button middle
S6:
Push button right
* can be expanded by adding kit components
11
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
HBA - 079 827
! 2 x 100 pulse handwheel, wear-resistant magnetic latching
! Overload-proof EMERGENCY-STOP according to EN 418, twin
channel
! Two enabling switches, 2 stage, one per NO contact
! 2 selector switches, each 5-fold (X, Y, Z, 4, 5 and 0, 1, 10, 100,
1000)
! 3 membrane pushbuttons, one per NO contact
Dimension drawing
∅ 85
67
S1
S8
S7
Mounting
magnet
S5
S6
S2
S3
160
S4
Notes
Cable length stretched
3,500 mm
! HBA holder for hand-held pendant stations
see Accessories, page 34
! Accompanying 23-pin flange sockets, see
Accessories, page 32
Plug connector
23-pin
Ordering table
Article
HBA - 079 827 hand-held pendant station
12
Order No.
079 827
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
Technical data
Parameters
HBA housing
Material
Color
Operating temperature
Storage temperature
Degree of protection according to EN 60529/NEMA
Connection
Weight
Handwheel
Pulse / Revolution
Distribution voltage
Output specifications
EMERGENCY-STOP
Norm
Switching element
Utilization category according to IEC 60947-5-1
Enabling switch
Switching element
Resistive load
Selector switch
Output code
Maximum switching voltage
Maximum switching current
Maximum switching capacity
Pushbutton
Switching elements
Maximum switching voltage
Maximum switching current
Maximum switching capacity
Value
Unit
Plastic (Polycarbonate)
Grey RAL 7040
0 to +50
-20 to +50
IP 65 / 250-12
Spiral cable, expandable to 3.5 m, 23-pin plug connector
approx. 1.3
°C
°C
kg
100
5 ± 5%
RS422A
V DC
EN 418
2 x NC contact
DC-13, Ue 24 V, Ie 3 A
1 x No contact
30 V AC / 0.4 A; 30 V DC / 0.1 A
see circuit plan
30
200
1
V DC
mA
W
3 membrane pushbuttons, one per NO contact
30
100
1
V DC
mA
W
Circuit plan
S4:
Push button left
S2:
Enabling switch left
S3:
Enabling switch right
BK X5/1
RD X5/4
X4/6
X4/4
B
1
RS 422 A
B
PK X5/3
YE X5/2
X4/8
X6/1
X6/2
X6/3
A
2 S1
B
1
A
B
D
Z
C
Gray-Code
A
B
C
D
X6/4
5
3
GY
YE
GN
BN
WH
E
D
C
B
A
ws
br
gn
ge
rs
gr
0,34²
PK
F
bl
rt
0,34²
BU
G
X2/3
RD
H
vt
sw
0,14²
BK
J
0,14²
VT
K
X2/2
X2/4
GYPK grrs 0,14²
L
0,14²
RDBU rtbl 0,14²
M
0,14²
GNWH wsgn 0,14²
N
0,34²
BNGN brgn 0,14²
P
0,34²
YEWH wsge 0,14²
R
0,34²
BNYE gebr 0,14²
S
0,34²
GYWH wsgr 0,14²
T
X3/4
BNGY grbr 0,14²
U
X3/8
WHPK wsrs 0,14²
V
X3/10
BNPK rsbr 0,14²
W
X3/3
BUWH wsbl 0,14²
X
X3/1
BNBU brbl 0,14²
Y
X4/5
X4/1
RDWH wsrt 0,14²
Z
X4/7
X4/3
+24 Volt
Connector
PCB
Z
3
3
2
+
5
3
3
S2
X4/2
S7
A
4
S3
-
S8
Gray-Code
4
1
Ground connection
Shield
Handwheel
Shield electr. connected to the handwheel
RW22,5˚
1
0V
4 S6 4 S5 4 S4
RW22,5˚
Handwheel
RS422
S1:
Emergency Stop
X1/2
S5:
Push button middle
S6:
Push button right
S7:
Axle selection
Selector switch left
5 positions
X1/1
S8:
Increment selection
Selector switch right
5 positions
x
y
z
4
5
A
UB:
+5 V +/-5%
0000
0001
0011
0010
0110
A
DCBA
1
2
3
4
5
X2/1
S7
B
DCBA
0000
0
0001
1
0011
10
0010 100
0110 1000
X3/9
X3/7
1
2
3
4
5
X3/5
S8
13
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
HBA - 072 910
! 2 x 100 pulse handwheel, wear-resistant magnetic latching
! Overload-proof EMERGENCY-STOP according to EN 418, twin
channel
! Two enabling switches, 2 stage, one per NO contact
! 1 selector switch, 6-fold (0, Z, X, Y, 4, 5)
! 6 membrane pushbuttons, one per NO contact
Dimension drawing
∅ 85
67
S1
S4
S6
S10
Mounting
magnet
160
S5
S7
S9
S8
S3
S2
Notes
! HBA holder for hand-held pendant stations
see Accessories, page 36
! Accompanying connection kit containing
24-pin connection box and short-circuit plug
see Accessories, page 36
Cable length stretched
3,500 mm
Plug connector
24-pin
Ordering table
Article
HBA - 072 910 hand-held pendant station
14
Order No.
072 910
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
Technical data
Parameters
HBA housing
Material
Color
Operating temperature
Storage temperature
Degree of protection according to EN 60529/NEMA
Connection
Weight
Handwheel
Pulse / Revolution
Distribution voltage
Output specifications
EMERGENCY-STOP
Norm
Switching element
Utilization category according to IEC 60947-5-1
Enabling switch
Switching element
Resistive load
Selector switch
Output code
Maximum switching voltage
Maximum switching current
Maximum switching capacity
Pushbutton
Switching elements
Maximum switching voltage
Maximum switching current
Maximum switching capacity
Value
Unit
Plastic (Polycarbonate)
Grey RAL 7040
0 to +50
-20 to +50
IP 65 / 250-12
Spiral cable, expandable to 3.5 m, 23-pin plug connector
approx. 1.3
°C
°C
kg
100
5 ± 5%
RS422A
V DC
EN 418
2 x NC contact
DC-13, Ue 24 V, Ie 3 A
1 x No contact
30 V AC / 0.4 A; 30 V DC / 0.1 A
see circuit plan
30
200
1
V DC
mA
W
6, one per NO contact
30
100
1
V DC
mA
W
Circuit plan
S10 CBA
110
010
011
111
101
001
0
Z
X
Y
4
5
S4: Push button "+"
S5: Push button "-"
S6: Push button "~"
S7: Push button "F1"
S8: Push button "F2"
S9: Push button " F3 "
S10:
selector switch right
6 positions
S4
A
B
1
Ground connection
Shield
Handwheel
Shield electr. connected to the handwheel
24
0V
X1/6
ws
WH
18
0,34²
A
UB:
+5 V +/-5%
BN
19
br
GN
0,34²
0,14²
YE
22
23
ge
X1/4
X1/3
0,14²
0,14²
rs
GY
21
gr
PK
20
0,34²
0,34²
BU
1
bl
rt
RD
2
0,34²
0,34²
3
vt
sw
VT
BK
4
W HP K wsrs 0,14²
grrs 0,14²
RDWH wsrt 0,14²
GYPK
16
6
GNWH wsgn 0,14²
11
7
BNGN
12
wsge 0,14²
RDBU rtbl 0,14²
X3/3
YEWH
13
gebr 0,14²
X4/4
X3/5
brgn 0,14²
BNYE
14
X3/2
X3/1
15
X3/4
X3/6
BNGY grbr 0,14²
GYWH wsgr 0,14²
17
C
0,14²
BNBU brbl
8
A
BUWH wsbl 0,14²
9
B
BNPK rsbr 0,14²
10
7 6
X4/3
8
X4/1
4
5
5
9
+24 VDC
3
10
X1/5
A
RS 422 A
X1/2
1
gn
YE X5/1
B
S1
B
PK X5/2
A
2
X1/1
2
0,14²
S2
3
3
X4/2
3
4
S3
B
4
X4/5
3
4
YE X6/1
3
3
S5
4
PK X6/2
4
X7/8
4
S6
S7
Connector PCB
9
X7/2
2
3
X7/7
1
3
4
X7/6
Level 1
Level 2
Handwheel
RS422
S1:
emergency-stop
+
Level 3
S3:
enabling switch right
-
3
12
S8
4
X7/5
S9
4
11
10
S2:
enabling switch left
1
X7/4
12
X7/3
1
2
3
4
5
6
15
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
Hand-held pendant station kit
! HBA kit without handwheel
The three designs without handwheel comprise the cable glands and mounting magnets. In addition to the basic HBA housing, two
other similar designs with an emergency assembly option and enabling switches are available.
The kit is designed to match individual customer specifications. Thanks to its modular configuration, you can construct prototypes and
special versions in line with your requirements.
Front plates to match the housings are supplied in aluminum, silver and black anodized.
Customer-specific functionality can be created by using the components supplied in the kit (pushbutton, selector switch, key-operated
rotary switch, etc).
For connection to the parent application, cables with different numbers of wires, plug connectors and the relevant flange sockets are
available.
16
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
! HBA kit with handwheel
The four designs with handwheels are distinguished by the output stages of the handwheels and are adapted to diverse controls.
17
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
HBA housing without handwheel, design 1
Dimension drawing
Notes
∅ 85
38,5
! Enclosed is a cable gland suitable for a cable
of diameter 5 - 10 mm
! Plastic-coated mounting magnet on the rear
of housing
! 6 fixing domes for printed board assembly in
top shell
! Matching front plate, see page 25
160
Mounting
magnet
Cable gland
enclosed
Technical data
Parameters
HBA housing
Material
Color
Ambient temperature
Degree of protection according to EN 60529
Weight
Value
Unit
Plastic (Polycarbonate)
Grey RAL 7040
0 to +50
to IP 65
0.3
°C
kg
Ordering table
Design
1
18
Article
HBA housing without handwheel, with mounting magnet
and cable gland
Order No.
084 445
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
HBA housing without handwheel, design 2
Notes
Dimension drawing
∅ 85
Blank plugs in fixing hole for
EMERGENCY-STOP device
38,5
160
Mounting
magnet
! Fixing hole for EMERGENCY-STOP device
(sealed with blank plugs)
! Enclosed is a cable gland suitable for a cable
of diameter 5 - 10 mm
! Plastic-coated mounting magnet on the rear
of housing
! 6 fixing domes for printed board assembly
in top shell
! Matching front plate, see page 25
Cable gland
enclosed
Technical data
Parameters
HBA housing
Material
Color
Ambient temperature
Degree of protection according to EN 60529
Weight
Value
Unit
Plastic (Polycarbonate)
Grey RAL 7040
0 to +50
to IP 65
0.3
°C
kg
Ordering table
Design
2
Article
HBA housing without handwheel, with mounting magnet
Fixing hole for EMERGENCY-STOP device and cable gland
Order No.
084 450
19
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
HBA housing without handwheel, design 3
Dimension drawing
Notes
Blank plugs in fixing hole for
EMERGENCY-STOP device
∅ 85
S2
Mounting
magnet
! Fixing hole for EMERGENCY-STOP device
(sealed with blank plugs)
! 2 enabling switches, one per NO contact
! Enclosed is a cable gland suitable for a cable
of diameter 5 - 10 mm
! Plastic-coated mounting magnet on the rear
of housing
! 6 fixing domes for printed board assembly in
top shell
! Matching front plate, see page 25
160
S1
38,5
Cable gland
enclosed
Technical data
Parameters
HBA housing
Material
Color
Operating temperature
Storage temperature
Degree of protection according to EN 60529
Weight
Enabling switch
Switching element
Resistive load
Value
Unit
Plastic (Polycarbonate)
Grey RAL 7040
0 to +50
-20 to +50
to IP 65
0.3
°C
°C
kg
1 x NO contact
30 V AC / 0.4 A; 30 V DC / 0.1 A
Ordering table
Design
3
20
Article
HBA housing without handwheel, with mounting magnet, fixing hole for EMERGENCY-STOP
device, 2 enabling switches, each with one NO contact and cable gland
Order No.
086 155
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
HBA housing with handwheel, design 1
Dimension drawing
Notes
∅ 85
S2
160
S1
Blank plugs in fixing
hole for
EMERGENCY-STOP
device
Mounting
magnet
67
! Integrated HKA handwheel with 100 pulses
per revolution
! Fixing hole for EMERGENCY-STOP device
(sealed with blank plugs)
! 2 enabling switches, one per NO contact
! Enclosed is a cable gland suitable for a cable
of diameter 5 - 10 mm
! Plastic-coated mounting magnet on the rear
of housing
! 6 fixing domes for printed board assembly in
top shell
! Matching front plate, see page 26
Circuit plan
for Siemens controls with RS422 handwheel
interface
-
Shield
+
Handwheel
0V
UB:+5 V ±5%
-
+
A
A
RS 422 A
/A
B
/A
B
/B
/B
Left enabling switch
3
S1
4
Cable gland
enclosed
Right enabling switch
3
S2
4
Technical data
Parameters
HBA housing
Material
Color
Operating temperature
Storage temperature
Degree of protection according to EN 60529
Weight
Handwheel
Pulse / Revolution
Distribution voltage
Output specifications
Enabling switch
Switching element
Resistive load
Value
Unit
Plastic (Polycarbonate)
Grey RAL 7040
0 to +50
-20 to +50
to IP 65
0.3
°C
°C
100
5 ± 5%
RS422A
kg
V DC
1 x NO contact
30 V AC / 0.4 A; 30 V DC / 0.1 A
Ordering table
Design
1
Article
HBA housing with handwheel, with mounting magnet, fixing hole for EMERGENCY-STOP
device, 2 enabling switches, each with one NO contact and cable gland
Order No.
083 449
21
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
HBA housing with handwheel, design 2
Notes
Dimension drawing
∅ 85
S2
160
S1
Blank plugs in fixing
hole for
EMERGENCY-STOP
device
Mounting
magnet
67
! Integrated HKA handwheel with 25 pulses
and 100 detents per revolution
! Fixing hole for EMERGENCY-STOP device
(sealed with blank plugs)
! 2 enabling switches, one per NO contact
! Enclosed is a cable gland suitable for a cable
of diameter 5 - 10 mm
! Plastic-coated mounting magnet on the rear
of housing
! 6 fixing domes for printed board assembly
in top shell
! Matching front plate, see page 26
Circuit plan
-
Shield
+
Handwheel
0V
UB:10 ... 30 V
-
+
A
push pull
A
B
B
Left enabling switch
3
S1
4
Right enabling switch
Cable gland
enclosed
3
S2
4
Technical data
Parameters
HBA housing
Material
Color
Operating temperature
Storage temperature
Degree of protection according to EN 60529
Weight
Handwheel
Pulse / Revolution
Distribution voltage
Output circuit
Output voltage / output current
HIGH, min.
LOW, max.
Enabling switch
Switching element
Resistive load
Value
Unit
Plastic (Polycarbonate)
Grey RAL 7040
0 to +50
-20 to +50
to IP 65
0.3
°C
°C
25
10 ... 30
5 V push-pull
3.9 V at 5 mA / 3.6 V at 20 mA
0.5 V at 20 mA
kg
V DC
1 x NO contact
30 V AC / 0.4 A; 30 V DC / 0.1 A
Ordering table
Design
2
22
Article
HBA housing with handwheel, mounting magnet, fixing hole for EMERGENCY-STOP device,
2 enabling switches, each with one NO contact and cable gland
Order No.
083 499
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
HBA housing with handwheel, design 3
Notes
Dimension drawing
∅ 85
S2
Mounting
magnet
160
S1
Blank plugs in fixing
hole for
EMERGENCY-STOP
device
67
! Integrated HKA handwheel with 100 pulses
per revolution
! Fixing hole for EMERGENCY-STOP device
(sealed with blank plugs)
! 2 enabling switches, one per NO contact
! Enclosed is a cable gland suitable for a cable
of diameter 5 - 10 mm
! Plastic-coated mounting magnet on the rear
of housing
! 6 fixing domes for printed board assembly
in top shell
! Matching front plate, see page 26
Circuit plan
-
Shield
+
Handwheel
0V
UB:10 ... 30 V
-
+
A
push pull
A
B
B
Left enabling switch
3
S1
4
Cable gland
enclosed
Right enabling switch
3
S2
4
Technical data
Parameters
HBA housing
Material
Color
Operating temperature
Storage temperature
Degree of protection according to EN 60529
Weight
Handwheel
Pulse / Revolution
Distribution voltage
Output circuit
Output voltage / output current
HIGH, min.
LOW, max.
Enabling switch
Switching element
Resistive load
Value
Unit
Plastic (Polycarbonate)
Grey RAL 7040
0 to +50
-20 to +50
to IP 65
0.3
°C
°C
100
10 ... 30
24 V push-pull
UB -3 V at 20 mA
3 V at 20 mA
kg
V DC
1 x NO contact
30 V AC / 0.4 A; 30 V DC / 0.1 A
Ordering table
Design
3
Article
HBA housing with handwheel, mounting magnet, fixing hole for EMERGENCY-STOP device,
2 enabling switches, each with one NO contact and cable gland
Order No.
083 495
23
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
HBA housing with handwheel, design 4
Notes
Dimension drawing
∅ 85
S2
160
S1
Blank plugs in fixing
hole for
EMERGENCY-STOP
device
Mounting
magnet
67
! Integrated HKA handwheel with 100 pulses
per revolution
! Fixing hole for EMERGENCY-STOP device
(sealed with blank plugs)
! 2 enabling switches, one per NO contact
! Enclosed is a cable gland suitable for a cable
of diameter 5 - 10 mm
! Plastic-coated mounting magnet on the rear
of housing
! 6 fixing domes for printed board assembly
in top shell
! Matching front plate, see page 26
Circuit plan
for Fanuc controls with push-pull handwheel
interface
-
Shield
+
Handwheel
0V
UB:+5 V ±5%
-
+
A
push pull
A
B
3
B
Left enabling switch
S1
4
Cable gland
enclosed
3
Right enabling switch
S2
4
Technical data
Parameters
HBA housing
Material
Color
Operating temperature
Storage temperature
Degree of protection according to EN 60529
Weight
Handwheel
Pulse / Revolution
Distribution voltage
Output circuit
Output voltage / output current
HIGH, min.
LOW, max.
Enabling switch
Switching element
Resistive load
Value
Unit
Plastic (Polycarbonate)
Grey RAL 7040
0 to +50
-20 to +50
to IP 65
0.3
°C
°C
100
5 ± 5%
5 V push-pull
4.0 V at 0 mA / 3.3 V at 6 mA / 3.0 V at 20 mA
0.5 V at 20 mA
kg
V DC
1 x NO contact
30 V AC / 0.4 A; 30 V DC / 0.1 A
Ordering table
Design
4
24
Article
HBA housing with handwheel, mounting magnet, fixing hole for EMERGENCY-STOP device,
2 enabling switches, each with one NO contact and cable gland
Order No.
086 762
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
Front plate for HBA housing without handwheel
Dimension drawing
Notes
0,5
142,4
69,4
! Matching the HBA housing without handwheel
(see pages 18 to 20)
! An illustrative file for customized front plates is
available (e.g. in Internet at www.euchner.de).
∅ 67,4
Rear is coated so as to be
self-adhesive
Technical data
Front plate
Material
Electrically anodized aluminum, black or silver
Rear is coated so as to be self-adhesive
Ordering table
Article
Front plate for HBA housing without handwheel, bright anodized
Front plate for HBA housing without handwheel, black anodized
Order No.
084 395
084 396
25
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
Front plate for HBA housing with handwheel
Dimension drawing
Notes
! Matching the HBA housing without handwheel
(see pages 21 to 24)
! An illustrative file for customized front
plates are available (e.g. in Internet under
www.euchner.de).
63,9
0,5
69,4
Rear is coated so as to be
self-adhesive
Technical data
Front plate
Material
Electrically anodized aluminum, black or silver
Rear is coated so as to be self-adhesive
Ordering table
Article
Front plate for HBA housing with handwheel, bright anodized
Front plate for HBA housing with handwheel, black anodized
26
Order No.
083 635
083 636
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
EMERGENCY-STOP device with pull release according to EN 418
Actuator element
Notes
25
Control
panel detail
37
∅16,2
39
! The EMERGENCY-STOP device engages
when actuated by pressing, unlocks when
pulled, and is overload-proof
! Is used only for HBA housing without
handwheel design 2/3 and all HBA housings
with handwheel
+ 0,20
0
∅28
Notes
Switching element
6
! 2 switching elements can be deployed per
actuator element
.1
12
5
18
.1
.2
.2
16
25
Technical data
Parameters
Actuator element
Color of actuating buttons
Color of bottom shell
Maximum number of switching elements
Degree of protection
Switching element
Contact element
Utilization category according to IEC 947-5-1
Value
Unit
red
yellow
2
IP 65
1 x positive opening
DC-13 Ue 24 V Ie 3 A
Ordering table
Article
EMERGENCY-STOP actuator element, pull release
EMERGENCY-STOP switching element, 1 positive opening
Blank plugs in fixing hole for EMERGENCY-STOP device
Order No.
083 637
083 638
083 653
27
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
Pushbutton
Dimension drawing
∅ ~ 15
SW 14
∅ 13,60
12,95
12,90
~1
+1
0
Packing ring
2 ± 0,20
12,5 6
Fixing nut
∅ 13,65
+1
0
5,15
Control panel
detail
∅ 16,8
M12x1
∅ 13,65
Control panel thickness
max. 3 mm
Key-operated rotary switch
Control panel detail
Dimension drawing
Connection circuit diagram
I
A
C
1
3
2
4
C
0
1.7 -0.1
14.6
18
max.4.5
A
15
11.5
35
+0.5
0
min18.
27
Technical data
Parameters
Pushbutton
Ambient temperature
Frontal protective type (integrated in front plate)
Switching principle
Switching element
Maximum switching current
Switching voltage
Contact resistance (in new status)
Connection type
Key-operated rotary switch
Ambient temperature
Frontal protective type (integrated in front plate)
Switching principle
Switching element
Maximum switching current
Maximum switching voltage
Contact resistance (in new status)
Connection type
Value
Unit
-25 to +70
to IP 67
Snap switch element
1 x NO contact
0.1
30
≤ 50
Soldered connection
°C
-25 to +55
IP 65
Snap switch element
1 x NO contact, 1 x NC contact
5
30
≤ 50
Soldered connection
A
V DC
mΩ
°C
A
V AC/DC
mΩ
Ordering table
Article
Pushbutton, black key
Pushbutton, red key
Pushbutton, green key
Pushbutton, blue key
Pushbutton, white key
Key-operated rotary switch
28
Order No.
083 640
086 753
086 754
086 757
086 755
083 639
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
Selector switch 1 of X
Dimension drawing
Control
panel
detail
5,5
2,5
8
5D11
6D11
3
10,16
20
8,5
2 C
M6x0,75
5
1
C
4
10,16
0,5
5,5
15,9
11,5
±0,25
Output circuit board
View of soldered
side
1 of 2
1 of 3
1 of 4
1
1
5
6
7
1
2
5
6
7
2
3
7
6
5
2
5
6
7
3
4
2
3
1
4
Technical data
Parameters
Frontal protective type (integrated in front plate)
Single-hole bush mounting
Detent positions
Switching angle
Output code
Maximum switching capacity
Maximum switching current
Maximum switching voltage
Contact resistance (in new status)
Connection type
Maximum soldering time (soldering copper 16 W)
Value
to IP 68
M6 x 0.75
2, 3 or 4, depending on type
36
1 of 2, 1 of 3 or 1 of 4, depending on type
5
0.2
30
≤ 50
Soldered connection on printed board
≤ 5 (at t ≤ 260 °C)
Unit
°
VA
A
V AC/DC
mΩ
s
Ordering table
Article
Selector switch, 2 detent positions, 1 of 2, batch-type
Selector switch, 3 detent positions, 1 of 3, batch-type
Selector switch, 4 detent positions, 1 of 4, batch-type
Order No.
083 668
083 669
083 670
29
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
Grey code selector switch
Dimension drawing
Control
panel
detail
5,5
2,5
8
5D11
1
C
4
10,16
0,5
5,5
15,9
11,5
±0,25
View of soldered side
7
6D11
3
10,16
20
8,5
2 C
M6x0,75
5
6
5
4
2
3
1
Connections 1 - 4: Switch outputs
Connections 5 - 7: Power supply
Output circuit board
Detent
position
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
4
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
3
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
Output
2
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
1
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
Between the detent positions, all outputs are connected
to the operating current.
Technical data
Parameters
Frontal protective type (integrated in front plate)
Single-hole bush mounting
Detent positions
Switching angle
Output code
Maximum switching capacity
Maximum switching current
Maximum switching voltage
Contact resistance (in new status)
Connection type
Maximum soldering time (soldering copper 16 W)
Value
to IP 68
M6 x 0.75
5, 6, 7, 8, 12 or 16, depending on type
22.5
Grey code
5
0.2
30
≤ 50
Soldered connection on printed board
≤ 5 (at t ≤ 260 °C)
Unit
°
VA
A
V AC/DC
mΩ
s
Ordering table
Article
Selector switch, 5 detent positions, grey code, short-circuited
Selector switch, 6 detent positions, grey code, short-circuited
Selector switch, 7 detent positions, grey code, short-circuited
Selector switch, 8 detent positions, grey code, short-circuited
Selector switch, 12 detent positions, grey code, short-circuited
Selector switch, 16 detent positions, grey code, short-circuited
30
Order No.
083 671
083 672
083 673
083 674
083 675
083 676
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
Rotary knob
Dimension drawing
Scope of delivery
! Rotary knob with cover and nut covering
∅3
∅ 14,5
16
∅ 11
∅7
∅ 10
Cover
1
3,8
Nut covering
∅ 17
∅ 18,7
2,7
3,5
Ordering table
Article
Rotary knob, matt grey with a marking, collet mounting for axis 3 mm
Rotary knob, matt black with a marking, collet mounting for axis 3 mm
Order No.
083 643
083 645
31
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
Plug connector
Number
of pins
35
28
23
12
D
40.2
37.2
33.9
27.5
Cable-Ø
8.0 - 12.0
8.0 - 12.0
6.0 - 10.0
5.5 - 9.5
Flange sockets
Installation
on the rear
Number of pins
35
28
23
12
on the front
A
Bmax.
Cmax.
Dmax.
Gmax.
L
M
N
P
34.9
31.7
28.5
22.2
14.6
14.6
11.4
11.4
17.3
17.3
13.3
13.3
25.7
25.7
24.1
24.1
39.9
36.8
33.6
28.8
31.8
29.4
27
22.9
34.1
30.9
27.8
21.4
37.7
34.5
31.3
25
3.1
3.1
3.1
3.1
Technical data
Parameters
Connecting plug/Flange socket
Housing material
Number of pins
Degree of protection according to EN 60529
(inserted)
Contact material
Value
Unit
Metal
12 / 23 / 28 / 35
to IP 65
0.4 µ Gold
Ordering table
Article
Plug connector, 35-pin with pin contacts
Plug connector, 28-pin with pin contacts
Plug connector, 23-pin with pin contacts
Plug connector, 12-pin with pin contacts
Flange socket, 35-pin with socket contacts
Flange socket, 28-pin with socket contacts
Flange socket, 23-pin with socket contacts
Flange socket, 12-pin with socket contacts
32
Order No.
074 395
074 394
074 393
086 748
074 386
074 385
074 384
086 749
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
Spiral-shaped and straight 12-pole cable
External coat: Matt black PUR
View of cable cross-section
Fitted fibrous web
Thread covering:
Spiral-shaped, non-coated Cu wire d = 0.1 mm
Optical coverage ~ 100 %
GN
BN
RDBU
BU
RD
Special foil fixing
PK
BK
GY
WH
YE
VT
Filling
6 x 0.14 mm²
Cu wire
Special thermoplastic isolation
Vein diameter of 0.8 mm
GYPK
Dimensions of spiral-shaped design
B
400
±0,3
∅ 10
±2
1000
∅ 6,0
A
Length stretched
Ordering table
Article
12-veined, spiral-shaped cable
12-veined, spiral-shaped cable
12-veined, straight cable
12-veined, straight cable
12-veined, straight cable
Cable length
[mm]
3900
5400
3500
5000
10000
A
[mm]
approx. 2500
approx. 4000
-
B
[mm]
550 ± 20
880 ± 20
-
Order No.
086 721
086 722
087 379
087 380
087 381
33
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
Spiral-shaped and straight 23-pole cable
View of cable cross-section
External coat: Matt black PUR
PK
GY
BN
YE
GN
GYPK
RDBU
BU
WH
RDWH
Fitted fibrous web
Thread covering:
Spiral-shaped, non-covered Cu wire d = 0.10 mm
Optical coverage ~ 100 %
Special foil fixing
GNWH
RD
VT
BNBU
BUWH
Filling
BNGN
GYWH
BK
BNPK
23 x 0.14 mm²
Cu wire, Special thermoplastic isolation
YEWH
BNYE
BNGY
WHPK
Dimensions
B
400
∅ 7,5 ±0,3
∅ 12
±2
1000
A
Length stretched
Ordering table
Article
23-veined, spiral-shaped cable
23-veined, spiral-shaped cable
23-veined, straight cable
23-veined, straight cable
23-veined, straight cable
34
Cable length
[mm]
3900
5400
3500
5000
10000
A
[mm]
approx. 2500
approx. 4000
-
B
[mm]
550 ± 20
880 ± 20
-
Order No.
087 408
087 409
087 382
087 383
087 384
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
Cable gland with anti-kink spiral
GL
H
E
M
SW
M
Cable diameter
SW
GL
H
Emin.
Emax.
M16x1.5
5 - 10
22
8
71
5
10
Ordering table
Article
M16x1 cable gland, 5 with anti-kink spiral and fixing nut, black color
Order No.
083 641
Short-circuit plug
L
D
40.2
37.2
33.9
27.5
L
84
78
72
59.4
LK
255
255
252
251
LK
∅D
Number
of pins
35
28
23
12
3 flexes enclosed
(0.34 mm²/60 mm long)
Lug for M3 screw
Ordering table
Article
Short-circuit plug with chain, 35-pin
Short-circuit plug with chain, 28-pin
Short-circuit plug with chain, 23-pin
Short-circuit plug with chain, 12-pin
Order No.
083 459
083 458
083 457
087 802
35
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
Accessories
Connection kit
for HBA design - 072 910, consisting of 24-pin connection box and short-circuit plug
24-pin connection box
Technical data
9
15
36,6
36,3
Parameters
ConnectionBox
Housing material
Number of pins
Degree of protection according to EN 60529
(inserted)
Contact material
4
1
5
10
20
16
21
24
7,1
2,3
44,5
13,5
29,5
24-pin short-circuit plug for 24-pin flange socket
(Bridged pin 1 with pin 4 and pin 2 with pin 3)
2
1
Short-circuit plug
Housing material
Number of pins
Degree of protection according to EN 60529
(inserted)
Contact material
3
4
9
5
15
10
20
16
21
Value
Plastic
24
IP 65
Copper base
alloy
Plastic
24
IP 65
Copper base
alloy
24
Ordering table
Article
Connection box and short-circuit plug
Order No.
072 937
HBA holder
93
56
Technical data
A-A
8,5
60
10,5
4,2
66
43,5
A
Parameters
Housing material
Fixing system
Ambient temperature
Weight
Value
plastic
Screws
-5 to +60
approx. 0.1
Unit
°C
kg
Ordering table
A
36
Article
HBA holder
Order No.
072 828
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
Appendix
! Customized hand-held pendant stations
! HBA top shell with domes and EMERGENCY-STOP position
37
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
Request form for HBA hand-held pendant stations without handwheels
Customer
Company
Telephone
Telefax
Address
E-mail
Name
Department
Surname
Date
Housing
Basic Housing
Emergency Stop
Moeller (pull to unlock)
without Emergency Stop
2 x NC
1 X NC
Enabling switch
1 NO left and right
1 NO/NC left and right
with hole for Emergency Stop
with hole for Emergency Stop and 2 Enabling switches
Front foil
EUCHNER standard colors
customized , see appendix
without enabling switch
Logo
without
EUCHNER
customized appendix: label of the logo
Selector switch 1
___ positions gray-code
___ positions 1 of X
Inscription ___________
Push button
without
Selector switch 2
___ positions gray-code
___ positions 1 of X
Inscription ___________
membrane push buttons, number: _____________
push buttons, number: _____________
not illuminated
illuminated
Key-operated
Rotary Switch
Lamp/LED
without
with
without
customized, see appendix
Cable
spiral-shaped cable, expandable to 3.5 m
spiral-shaped cable, expandable to 5.0 m
straight: ________ m
Connector
Burndy metal
Coninvers metal
other: _____________
without connector
Inscription
Selector Switch
on front foil customized,
see appendix
without
Color Rotary knob
Selector Switch
black
grey
Special requests
Quotation
Quantity
nonrecurring project demand
Requested delivery date
Week
Date
38
Series demand per year
Signature
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
Request form for HBA hand-held pendant stations with handwheels
Customer
Company
Telephone
Address
Telefax
E-mail
Name
Department
Surname
Date
Housing
with magnetic clamp
without magnetic clamp
LED
without LED
green
Emergency Stop
Moeller (pull to unlock)
without Emergency Stop
2 x NC
1 x NC
Selector switch left
___ positions gray-code
___ positions 1 of X
without selector switch
Inscription:
_________
______________________
other color: _________
Colors of
the foil
Euchner standard
basic color: _________
Logo
Euchner standard
customized
appendix: label of the logo
Push button
Selector switch left + right
Knob color black
Knob color grey
Selector switch right
___ positions gray-code
___ positions 1 of X
without selector switch
Inscription:
_________
______________________
1)
3 membrane push buttons
other: 1) ________
__________________
Enabling switches
1 NO left and right
1 NO/NC left and right
without enabling switch
Handwheel
Supply voltage Ub= 5V
Supply voltage Ub= 10-30V
without push buttons
Output RS422
Output Push-pull 5V
Output Push-pull +Ub
without LEDs
with LEDs
100 pulses
25 pulses 2)
1) appendix: label of the push buttons
Connector
2) only for Mitsubishi controls
Burndy metal
Coninvers metal
other: _____________
without connector
Which control is used?
Siemens
Fanuc
Mitsubishi
others: _______________
Cable
spiral-shaped cable, expandable to 3.5 m
spiral-shaped cable, expandable to 5.0 m
straight: _____ m
Special requests
Quotation
Quantity
nonrecurring project demand
Requested delivery date
Week
Date
Series demand per year
Signature
39
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
Dimensions HBA top shell with domes
! HBA top shell with handwheel
52
50
33
1 x 45°
∅ 12,5
46,5
Dome for fixing board
(board is 1.5 mm thick,
Screw 2.5 x 8)
30
92,5
∅ 5,5
5,5
89,5
56,5
7,5
∅8
2
∅ 60
! HBA top shell without handwheel
52
55
R
∅
25
,5
32
8
2
28
50
40
∅8
∅ 12,5
1 x 45°
125
Dome for fixing board
(board is 1.5 mm thick,
Screw 2.5 x 8)
38
93
92,5
46,5
∅ 5,5
5,5
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
HBA Hand-Held Pendant Station
For your notes
41
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
Repr
esent
ation int
ern
ation
al
epre
sentation
intern
ernation
ational
Australia
Micromax Pty. Ltd.
PO Box 1238
AUS-Wollongong
NSW Australia 2500
Tel. +61 (0) 2 4271 1300
Fax +61 (0) 2 4271 8091
[email protected]
Austria
EUCHNER Ges. mbH
Süddruckgasse 4
A-2512 Tribuswinkel
Tel. +43 (0) 22 52 4 21 91
Fax +43 (0) 22 52 4 52 25
[email protected]
Benelux
EUCHNER (BENELUX) B.V.
Postbus 119
NL-3350 AC Papendrecht
Tel. +31 (0) 78 6 15 47 66
Fax +31 (0) 78 6 15 43 11
[email protected]
Brazil
EUCHNER Itda.
Av. Prof. Luiz Ignacio Anhaia
Mello no. 4387
S. Lucas
São Paulo SP Brasil
CEP 03295-000
Tel. +55 (0) 11 69 18-22 00
Fax +55 (0) 11 61 01-06 13
[email protected]
Canada
IAC & Associates Inc.
1925 Provincial Road
Windsor, Ontario N9A 6J3
Tel. +1 (5 19) 966-3444
Fax +1 (5 19) 966-6160
[email protected]
China
Knowhow I&C Co.
C-2204 Webok Times Center
No. 17 Zhongguancun Nandajie
Beijing, 100081
Tel. +86 10 8857 8899
Fax +86 10 8857 8989
[email protected]
Czech Republic
Amtek spol s.r.o.
.
.
Elektronicke Soucastky
Automatizacni Technika
.
Presne strojìrenstvi
Videnská 125
CZ-619 00 Brno
Ceská republika
Tel. +420 5 47 12 55 70
Fax +420 5 47 12 55 56
[email protected]
Eastern Europe
Hera Handels Ges. mbH
Hauptstraße 61
A-2391 Kaltleutgeben
Tel. +43 (0) 22 38 7 75 18
Fax +43 (0) 22 38 7 75 28
[email protected]
Finland
Sähkölehto Oy
Lehto & Co.
Holkkitie 14
FIN-00880 Helsinki
Tel. +358 (0) 9 774 6420
Fax +358 (0) 9 759 1071
[email protected]
France
EUCHNER France S.A.R.L.
Immeuble Le Colorado
ERAGNY PARC
Rue Rosa Luxembourg
Parc d'affaires des Bellevues
F-95610 ERAGNY sur OISE
Tel. +33 (0) 1 39 09 90 90
Fax +33 (0) 1 39 09 90 99
[email protected]
Hong Kong
Imperial Engineers &
Equipment Co. Ltd.
Unit B 12th Floor
Cheung Lee Industrial Building
9 Cheung Lee Street
HK-Chaiwan, Hong Kong
Tel. +8 52/28 89 02 92
Fax +8 52/28 89 18 14
[email protected]
Hungary
EUCHNER Ges.mbH
Magyarországi Fióktelep
H-2045 Törökbálint
Tópark Ipari park 3301/28
Feketerét u. 1.
Tel. +36/23/428 374
Fax +36/23/428 375
[email protected]
India
Teknic Controlgear PVT Ltd.
703, Madhava,
Bandra Kurla Complex
Bandra East
IND-Mumbai 400051
Tel. +91-80-23 61 9348
+91-80-23 61 7867
Fax +91-80-23 61 8607
[email protected]
ˆ
ˆ
ˆ
ˆ
Denmark
Robotek EL & TEKNIK A/S
Blokken 31, Postboks 30
DK-3460 Birkerød
Tel. +45 44 84 73 60
Fax +45 44 84 41 77
[email protected]
42
Iran
INFOCELL IRAN Co.
# 84, Manoucheri Ave.,
P.O. Box 81655-861, Isfahan, IRAN
Tel. +98 311 221 1358
Fax +98 311 222 6176
[email protected]
Italy
TRITECNICA S.r.l.
Viale Lazio 26
I-20135 Milano
Tel. +39 02 54 194-1
Fax +39 02 55 01 04 74
[email protected]
Japan
Solton Co. Ltd.
2-13-7, Shin-Yokohama
Kohoku-ku, Yokohama
Japan 222-0033
Tel. +81 (0) 45 4 71 77 11
Fax +81 (0) 45 4 71 77 17
[email protected]
Korea
EUCHNER Korea Ltd.
RM 810 Daerung Technotown
#448 Gasan-Dong
Kumchon-Gu, Seoul
Tel. +82 (02) 2107 3500
Fax +82 (02) 2107 3999
[email protected]
Mexico
SEPIA S.A. de C.V.
Maricopa # 10
302, Col. Napoles.
Del. Benito Juarez
MEX-03810 Mexico D:F:
Tel. +52 (5) 6822 347
Fax +52 (5) 5367 787
[email protected]
New Zealand
WAF, W. Arthur Fisher
11 Te Apunga Place
Mt. Wellington
Aukland, New Zealand
Tel. +64 (0) 9 270 0100
Fax +64 (0) 9 270 0900
[email protected]
Norway
ELIS ELEKTRO AS
Jericoveien
N-1067 Oslo
Tel. +47 (22) 90 56 70
Fax +47 (22) 90 56 71
[email protected]
Poland
ELTRON
pl. Wolnosci
´ 7B
PL 50-071 Wroclaw
´
Tel. +48 (0)71 343 97 55
Fax +48 (0)71 343 96 64
[email protected]
Portugal
PAM – Serviços Técnicos
Industriais, Lda
Rua Senhora da Alegria 188
P-4785 Alvarelhos STS
Tel. +3 51 (0) 22 98 27 518
Fax +3 51 (0) 22 98 27 519
[email protected]
Singapore
SENTRONICS
Automation and Marketing Pte Ltd
Blk 3021 Ubi Avenue 2
# 03-169
SGP-Singapore 408897
Tel. +65/6744 8018
Fax +65/6744 1929
[email protected]
Slovenia
SMM d.o.c.
Production Systems Ltd.
Jaskova 1E
SLO-2001 Maribor
Slovenia
Tel. +386 (0)2 450 23 26
Fax +386 (0)2 462 51 60
[email protected]
Spain
EUCHNER, S.L.
Gurutzegi 12 - Local 1
Polígono Belartza
E-20018 San Sebastián
Tel. +34 (9 43) 31 67 60
Fax +34 (9 43) 31 64 05
[email protected]
Sweden
Censit AB
Box 331
S-33123 Värnamo
Tel. +46 (0) 3 70 69 10 10
Fax +46 (0) 3 70 188 88
[email protected]
Switzerland
EUCHNER AG
Ing.- und Vertriebsbüro
Grofstraße 17
CH-8887 Mels/St. Gallen
Tel. +41 (0) 81 7 20 45 90
Fax +41 (0) 81 7 20 45 99
[email protected]
Taiwan
Daybreak International
(Taiwan) Corp.
3 Fl., 124 Chung-Cheng Road
Shihlin
Taipei, Taiwan
Tel. +8 86 (0) 2 8 866 1231
Fax +8 86 (0) 2 8 866 1239
[email protected]
Turkey
PINAR MÜHENDISLIK SAN.
ve Tic. Ltd. Sti.
Perpa Tic. Merkezi
Kat. 11, No. 1705
TR-80270 Okmeydani/lstanbul
Tel. +90 (0) 2 12 2 20 02 77
Fax +90 (0) 2 12 2 20 13 16
[email protected]
United Kingdom
EUCHNER (U.K.) Ltd.
Unit 2, Petre Drive,
GB-Sheffield, S4 7PZ
Tel. +44 (0) 1 14 2 56 01 23
Fax +44 (0) 1 14 2 42 53 33
[email protected]
USA
EUCHNER USA Inc.
6723 Lyons St.
USA-E. Syracuse, NY 13057
Tel. +1 (3 15) 7 01-03 15
Fax +1 (3 15) 7 01-03 19
[email protected]
He
ad offic
e
Hea
office
EUCHNER GmbH + Co. KG
Kohlhammerstraße 16
D-70771 Leinfelden-Echterdingen
Germany
Tel. +49/7 11/75 97-0
Fax +49/7 11/75 33 16
[email protected]
www
hner
www..euc
euchner
hner..com
More than safety. More than safety.
than safety. More than safety. More
safety. More than safety. More than
More than safety. More than safety.
than safety. More than safety. More
safety. More than safety. More than
More than safety. More than safety.
than safety. More than safety. More
safety. More than safety. More than
More than safety. More than safety.
than safety. More than safety. More
safety. More than safety. More than
More than safety. More than safety.
than safety. More than safety. More
safety. More than safety. More than
More than safety. More than safety.
than safety. More than safety. More
safety. More than safety. More than
More than safety. More than safety.
than safety. More than safety. More
safety. More Automation
than safety. More than
More than safety. More than safety.
than safety. More than safety. More
safety. More than safety. More than
More than safety. More than safety.
than safety. More than safety. More
safety. More than safety. More than
More than safety. More than safety.
than safety. More than safety. More
safety. More than safety. More than
than safety.
More than safety. More Safety
than safety. More than safety. More
safety. More than safety. More than
More than safety. More than safety.
than safety. More than safety. More
safety. More than safety. More than
More than safety. More than safety.
than safety. More
than safety. More ManMachine
safety. More than safety. More than
More than safety. More than safety.
than safety. More than safety. More
safety. More than safety. More than
More than safety. More than safety.
than safety. More than safety. More
safety. More than safety. More than
More than safety. More than safety.
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles
Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
More than safety.
than safety. More
safety. More than
More than safety.
than safety. More
safety. More than
More than safety.
than safety. More
safety. More than
More than safety.
than safety. More
safety. More than
More than safety.
than safety. More
safety. More than
More than safety.
than safety. More
safety. More than
More than safety.
than safety. More
safety. More than
More than safety.
than safety. More
safety. More than
More than safety.
than safety. More
safety. More than
More than safety.
than safety. More
safety. More than
More than safety.
than safety. More
safety. More than
More than safety.
than safety. More
safety. More than
More than safety.
than safety. More
safety. More than
More than safety.
than safety. More
safety. More than
More than safety.
than safety. More
safety. More than
More than safety.
43
Mor
than
safe
Mor
than
safe
Mor
than
safe
Mor
than
safe
Mor
than
safe
Mor
than
safe
Mor
than
safe
Mor
than
safe
Mor
than
safe
Mor
than
safe
Mor
than
safe
Mor
than
safe
Mor
than
safe
Mor
than
safe
Mor
than
safe
Mor