Force Sensor KD24S
Nominal force ranges ±2N, ±10N, ±20N, ±50N, ±100N
The force sensor KD24S is the smallest s-shaped force sensor. It is excellently suited for
testing tasks in quality assurance as well as in material testing. Inward and outward force
transmission are arranged centrically. Under loading the force transmission brackets are
moved parallel.
Like the KD40s the force sensor KD24S is constructed as a multi-range sensor. The
accuracy of 0.1 % is already reached at an output of 0.5 mV/V.
Sensors from 2 to 20N can be operated with 4 times and sensors from 50 to 100N with
two times their nominal force range.
It is recommended to fix the sensor cable side (bottom side on picture) on the non-moving
side of force transmission.
Dimensions
Bestech Australia
1
U14/44 Garden Blvd, Dingley VIC 3172
Tel: 03 9540 5100
Fax: 03 9551 5541
[email protected]
www.bestech.com.au
Force Sensor KD24S
Nominal force ranges ±2N (8N), ±10N (40N), ±20N (80N), ±50N (200N), ±100N (200N)
Technical Data
Force sensor
Construction
Length width x height
Force transmission
Fastening
Material
Accuracy class
Nominal force FN
Nominal deflection
Operating force
Breaking force
Nominal temperature range
Operating temperature range
Storage temperature range
Nominal output (SN)
Zero signal tolerance
Max. supply voltage
Input resistance
Output resistance Insulation
resistance Connection,
4-conductor open
Linearity error
Reversal error
Temperature coeff. of the zero
signal
Temperature coeff. of the nominal
output
Zero point return error (30 min)
Creep error (30 min)
Tension / compression
Double bending beam
24mm x 26mm x10mm
M5 mm
M5 mm
aluminum
0.1
2
0.05
8
20
10
0.05
40
100
20
0.05
80
200
50
0.06
100
500
+10…+60
- 20…+80
- 40…+80
100
0.1
200
1000
N
mm
N
N
°C
°C
°C
0.5 0.1 % 1)
10
10
390 0 4
350 1.5
>5*109
2
mV/V
% FN
V
Ohm
Ohm
Ohm
m
% SN
% SN
% FN /K
≤ 0.1
≤ 0.1
≤ ±0.02
≤ ±0.01
% SN /K
≤ 0.1
≤ 0.1
% SN
% SN
1) The nominal output might differ from 0.5 mV/V. In that case the exact output will be given in a proof protocol.
Pin Configuration
+US
- US
+UD
- UD
positive bridge supply
negative bridge supply
positive bridge output
negative bridge output
Bestech Australia
2
U14/44 Garden Blvd, Dingley VIC 3172
red
black
green
white
Tel: 03 9540 5100
Fax: 03 9551 5541
[email protected]
www.bestech.com.au
Force Sensor KD40S
Nominal force ranges ±2N, ±10N, ±20N, ±50N, ±100N , ±500N, ±1000N, ±2000N
The force sensor KD40S is very well suited for testing tasks in quality assurance as well as
in materials testing due to its compact construction. Inward and outward force
transmission are arranged centrically.
The force sensors KD40S up to 100N are constructed as multi-range sensors. The accuracy
of 0.1 % is already reached at an rated output of 0.5 mV/V. This means that the zero-point
stability is 4 times higher than in a sensor with the nominal output of 2 mV/V. The force
sensor KD40S can be used up to an output signal of 2 mV/V or four times the specified
nominal force.
The force sensor KD40S (up to 100 N) should be installed in such way that the outgoing
cables are assigned to the immobile side of the measuring construction. Thus forces from
the connecting cable do not have an influence on measurement results.
From 500N upwards the force sensors KD40s have a nominal rated output of 1.0mV/V.
They can safely be overloaded up to 1.5x their nominal force.
The cable output can be found in the middle of the two force transmission beams.
For force transfer there exists one thread M5 (up to 100N) and M6 (from 500N) in the top
and bottom side of the force sensor.
Additionally there is a thread M6 (from 500N) that can be used as anti-twist protection.
The force sensor from a nominal force of 1000N has a height of 34 mm.
Bestech Australia
1
1
U14/44 Garden Blvd, Dingley VIC 3172
Tel: 03 9540 5100
Fax: 03 9551 5541
[email protected]
www.bestech.com.au
Dimensions
Pin Configuration
+US
- US
+UD
- UD
positive bridge supply
negative bridge supply
positive bridge output
negative bridge output
Bestech Australia
2
2
U14/44 Garden Blvd, Dingley VIC 3172
Version 1
red
black
green
white
Version 2
brown
white
green
yellow
Tel: 03 9540 5100
Fax: 03 9551 5541
[email protected]
www.bestech.com.au
Force Sensor KD40S
Nominal force ranges ±2N, ±5N, ±10N, ±20N, ±50N, ±100N
Technical Data 2N...100N
Force sensor
Construction
Length width x height
Force transmission
Fastening
Material
Accuracy classes
tension / compression
double beam
403010
M5
M5
aluminum
0.1
mm mm
mm
mm
Nominal force FN
Nominal displacement
Operating force
Breaking force
±2 ... ±2000
< 0.05
400
> 300
N
mm
%FN
%FN
Nominal temperature range
Operating temperature range
Storage temperature range
+10…+60
-20…+80
-40…+80
°C
°C
°C
Nominal output (SN)
Zero signal tolerance
Max. supply voltage
Input resistance
Output resistance
Insulation resistance
Connection, 4 conductor open
0.5 0.1 %
10
10
400 20
350 2
> 5 109
2
mV/V
%FN
V
Ohm
Ohm
Ohm
m
Linearity error
Backlash width
Temp. coeff. of the zero signal
Temp. coeff. of the nominal output
Zero point return error (30 min)
Creep error (30 min)
<< 0.1
<< 0.1
0.02
0.01
<< 0.1
<< 0.1
% SN
% SN
%FN/K
% SN/K
% SN
% SN
Bestech Australia
3
3
U14/44 Garden Blvd, Dingley VIC 3172
Tel: 03 9540 5100
Fax: 03 9551 5541
mm
[email protected]
www.bestech.com.au
Force Sensor KD40S
Nominal force ranges ±500N, ±1000N, ±2000N
Technical Data 500N...2000N
Force sensor
Construction
Length width x height
Force transmission
Fastening
Material
Accuracy classes
tension / compression
shear beam
40 34 10
M6
M6
aluminum
0,1
mm mm mm
mm
mm
Nominal force FN
Nominal displacement
Operating force
Breaking force
500 ... 2000
< 0.5
150
> 300
N
mm
%FN
%FN
Nominal temperature range
Operating temperature range
Storage temperature range
+10…+60
- 20…+80
- 40…+80
°C
°C
°C
Nominal output (SN)
Zero signal tolerance
Max. supply voltage
Input resistance
Output resistance
Insulation resistance
Connection, 4 conductor open
1.0 ± 0.1%
10
10
1200 50
1000 5
> 5 109
2
mV/V
% FN
V
Ohm
Ohm
Ohm
m
Linearity error
Backlash width
Temp. coeff. of the zero signal
Temp. coeff. of the nominal output
Zero point return error (30 min)
Creep error (30 min)
• 0.1
• 0.1
• 0.02
• 0.01
• 0.1
• 0.1
% SN
% SN
% FN/K
% SN/K
% SN
% SN
Bestech Australia
4
4
U14/44 Garden Blvd, Dingley VIC 3172
Tel: 03 9540 5100
Fax: 03 9551 5541
[email protected]
www.bestech.com.au
Features
High Measuring Accuracy
Suitable for Medium and High Load
Measurement (20kg to 30t)
Compact and Rugged Model for
Tension and Compression
Wide Range of Media Compatibility
Low Static and Thermal Errors
Description
MLS21 series with Stainless Steel or alloy steel material is a rugged and accurate based load cell
suitable for tension-compression load measurement. This S-type load cell offers great flexibility and
reliability for a wide range of applications with highly competitive pricing.
MLS21 is available in ranges from 20kg to 30t with an output of mV/V. While the standard Precision is
0.02% FS, as an option OIML C3 is available.
The robust construction of MLS21 with its high performance makes it ideal for demanding long term
applications.
Applications
Bin and hopper weighing systems
Hanging Scales
Mechanical scale conversion
OEM scale construction
Tension force measurement
Level and inventory measurement
Material Testing Instruments
Production machinery automation
Technical Specifications
Capacity Ranges: 20kg to 30t
Compensated temp. range: -10 to 55°C
Output signals: 2.0 ± 0.004mV/V
3.0 ± 0.004mV/V
Operating temp. range: -35 to +80°C
Precision: 0.02% FS (combined LRH error),
Option: OIML C3
Creep: ±0.02% FS/30min
Overload rating: 150% FS
Supply voltage: 5 to 15 VDC
Zero unbalance: 1% FS
Protection Level: IP67, with cable connection
Bestech Australia
Temp. coefficient of zero: 0.02% FS /10°C
Temp. coefficient of span: 0.03% FS /10°C
Insulation resistance: ≥ 5000MΩ @ 50VDC
Input resistance: 360±10Ω
Output resistance: 360±10Ω
Electrical connection: 4-cored shield cable,
φ=5.7mm, L=3.5m (for range ≤ 2t) / L=6m (for
range ≥ 3t) or others
Distributor of Measure X
Dimensions
Capacity
B
D
H
L
20-30kg
12.7
M8x1.25
64
51
50-750kg
19.1
M12x1.75
76.2
50.8
1t
25.4
M12x1.75
76.2
50.8
1.5t
25.4
M16x1.5
76.2
50.8
2t
31.8
M20x1.5
108
76.2
3t
31.8
M20x1.5
108
76.2
5t
37
M24x2
108
76.2
7.5t
37
M24x2
139.7
100
10t
50.8
M30x2
177.8
125.5
20t
81
M42x3
170
140
30t
80
M42x3
230
190
Connection Diagrams
Note: All specification is subject to change without prior notice
Ver. 4.5-12/04
Bestech Australia
Distributor of Measure X
Features
Miniature Size
Suitable for Low and Medium Loads (0.1 to 20kN)
Compact and Rugged Model
Steel Alloy Material
Very Competitive Price
Description
MLW24 series with Steel alloy material is a rugged and accurate load cell suitable for compression load
measurement. This miniature load cell offers great flexibility and reliability for a wide range of
applications with highly competitive pricing.
MLW24 is available in standard ranges from 100N to 20kN with an output of mV/V. Standard precision is
0.5% FS.
The robust construction of MLW24 with its high performance makes it ideal for demanding long term
applications.
Applications
Industrial Automation and Robotics
Universal testing machines
Precision mechanisms
Level and inventory measurement
Measuring and control systems
Flat mounting weighing systems
Technical Specifications
Capacity: 0.1kN to 20kN or other ranges
Compensated temp. range: -10 to 55°C
Output signals: 1.5 ± 0.1mV/V
Operating temp. range: -35 to +80°C
Precision: 0.5% FS (standard),
(combined LRH error)
Temp. coefficient of zero: 0.1% FS /10°C
Creep: ±0.2% FS / 30min
Input resistance: 410±30Ω
Overload rating: 120% FS
Output resistance: 350±30Ω
Supply voltage: 5 to 15 VDC
Insulation resistance: 5000MΩ @ 50VDC
Zero unbalance: ±1% FS
Electrical connection: 4-cored shielded cable,
φ=2mm and length=1.5m and others
Temp. coefficient of span: 0.2% FS /10°C
Protection Level: IP66 (and IP67 as option)
Dimensions
Bestech Australia
Wiring
Capacity
(kN)
D1
D2
D3
D4
H1
H2
H3
M
h
SR
0.1-0.5
25
18
15
2.8
0.5
7.7
1.3
M2.5
thru
40
1-5
31.3
24
18.5
8
0.5
8.5
1.3
M2.5
6
50
10-20
37.7
32
25.4
12
0.7
14
1.7
M2.5
8
60
Distributor of MeasureX
LOAD CELLS
KCE-NA
Center-hole type Compression Load Cell
Bestech Australia
500kN~2MN
LOAD CE LLS
KCM-NA
Center-hole type Compression Load Cell
Bestech Australia
50kN~5MN
LOAD CELLS
KCC-NA
Center-hole type Compression Load Cell
200kN ~ 1MN
./
Bestech Australia
LOAD CELLS
KCC-NA
Center-hole type Compression Load Cell
200kN ~ 1MN
./
Bestech Australia
LOAD CE LLS
Bestech Australia