Display keypad
5739 46 (White) HC4608
L4608 N4608
067507 5739 47 (Magnesium) HD4608 HS4608 NT4608
Description
1
Using the transponder key, or a secret code set on the central unit, this device with
display and digital keypad can be used to arm/disarm the system and separate the zones
with the same flexibility and using the same procedure as for burglar-alarm central unit
with display, or three module flush mounted central units.
In this way the central units can be installed in an appropriate equipment room, out of
sight.
All system status details are shown of the large backlit display.
Related articles:
681 82 (White Cover)
684 82 (Titanium Cover)
801 24 (Flush-mounting box)
3
Technical data
1
2
3
4
5
6
7
8
9
0
P
6
C
OK
5
2
- Power supply from SCS BUS: 27 Vdc
- Max. absorption: 28 mA
- Operating temperature: 5 – 40°C
Dimensional data
Front view
4
Size: 3+3 modules
Legend
1 -Graphic display: displays the messages which guide the programming operations
and the events which have occurred.
2 -Transponder reader: receives the burglar-alarm system switching on and off
commands directly from the transponder keys.
3 -Alphanumeric keypad: allows the manual switching on of all those programming
operations which require the use of numbers and/or symbols.
4 -C key: exit the current menu and the programming.
5 -OK key: to confirm the programming operations.
6 -Navigation keypad: navigate the menu.
MQ00025-c-EN
28/10/2013
1
Display keypad
5739 46 (White) HC4608
L4608 N4608
067507 5739 47 (Magnesium) HD4608 HS4608 NT4608
Configuration
The activator with display must be configured by assigning a zone address (Z), indicating
the activator group it belongs to, and a progressive number (N) within the group.
To configure it as belonging to the activators group, no value must be entered in Z.
The configuration is performed using a specific menu shown on the display, following
the procedure below:
1.Ensure that the system is in “maintenance” mode.
Selecting the central unit installed in the system
1. Select “type of central unit”.
2. Select the type of burglar-alarm central unit installed:
-“Display” for central unit item 3486, item 3485/B, 573935, 573934, 067520 and item HC/HD/HS/L/N/NT4601 “No display” for central unit item L/N/NT4600/4 and AM5780/4.
2.Upon switching on the activator, the “SETTING” screen appears in Italian language.
3. Press OK to confirm.
3.Select “Address” (address).
4.Enter the Z and N address to assign to the activato and press OK to confirm.
4. Enter the other settings or return to the main page, and start the learning procedure
on the central unit.
5.Enter the other settings or return to the main page, and start the learning procedure
on the central unit.
For further device customisation procedures refer to the information on the CD supplied
with the product.
Address configuration menu
Address configuration menu
SETTINGS
SETTINGS
Language
Address
Central unit type
Address--
Language
Address
Central unit type
Display
SETTINGS
SETTINGS
Language
Address
Central unit type
No display
Language
Address
Central unit type
Address 12
WARNING
Modified address
run system
learning
in progress...
SETTINGS
SETTINGS
Language
Address
Central unit type
No display
Language
Address
Central unit type
Address12
MQ00025-c-EN
2
28/10/2013