Talos Revolving Doors
Talos Circular Sliding Doors
Design and Function
«The entrance area is our hotel‘s calling card - it’s the first and permanent impression
our guests receive on arrival. Our choice has been a Talos all-glass revolving door.
Along with the stylish design we really appreciate the excellent thermal insulation it
provides and how easy it is to pass through – even with luggage.»
Energy-Saving Talos Revolving Doors
and Circular Sliding Doors
Versatile Talos Revolving Doors
Revolving doors in particular, thanks to their closed design,
effect the highest possible energy saving during entry or
exit of a building. Without draught, which usually occurs
with opening doors, the interior next to the revolving door
may be optimally used for reception or a suite. Optimal
throughput rates can be achieved by simultaneous passage
from inside and outside.
Versatile variants of options allow for equipment of the revolving doors according to the customers‘ demands:
wheelchair accessible, with escape route function, with
night closure or with corresponding resistance classes
against bullet impact or burglary. At the same time the prestigious entrance area gains attractiveness due to the transparent design.
Effective Talos Circular Sliding Doors
Circular sliding doors with their great creative freedom give
each entrance a special, individual touch. The facade’s thermal separation is not affected by the circular sliding doors
opening one after the other. The slender design with sliding
doors allows for a high throughput rate.
User friendliness
A sophisticated sensor system according to current regulations prevents users from being injured. A running controller for reduction of rotational speed may be used for handicapped access.
Security
For higher security demands reinforced bullet- and burglaryresistant versions with resistance classes WK2 and WK3
have been certified. Options as for example a rotating unit
with escape route function1 or a night closure complete the
product range.
1 Individual approval required (competent authority)
Talos Revolving Doors RDR
Throughput rate(1 direction)
= 16 to 28 per minute
Security level
=     
Comfort=

Personal safety
=     
Talos Circular Sliding Doors CSD
Throughput rate(1 direction)
= over 40 per minute
Security level
=     
Comfort=

Personal safety
=     
Talos Revolving Doors/Talos Circular Sliding Doors
3
Barrier-free access at revolving doors by lateral
addition of swing or sliding doors. Circular sliding
doors provide versions for barrier-free access.
Advantages of Talos Revolving Doors
and Circular Sliding Doors
Versatility for users and operators.
Talos RDR Revolving Doors
>>Energy-saving thermal separation
>>Transparent all-glass units with filigree profiles
>>Solutions suitable for escape routes
>>Optional night-time closure
>>Optional rotation speed controller for handicapped access
>>Versions with resistance classes WK2 and WK3
>>Safety sensor system according to DIN 18650
Talos CSD Circular Sliding Doors
>>Energy-saving thermal separation
>>High throughput rate
>>Solutions suitable for escape routes
>>Transparent all-glass units with filigree profiles
>>Safety sensor system according to DIN 18650
4
Talos Revolving Doors/Talos Circular Sliding Doors
The fitting solution for any entrance situation
Prepared for emergency – fourwinged revolving door with
approved escape route rotating unit
Security surplus – four-winged
revolving door with night-time
closure
All-glass design throughout – revolving doors with underfloor drive
Architect: Petraccone et Vodar SCM,
Building owner: Unibail
Outstanding looks by stainless steel
with high gloss finish
A noble combination – circular
sliding door in all-glass façade
Approved escape route rotating unit
– The wings can be folded manually
so as to enable escaping persons to
get outside unhindered
Talos Revolving Doors/Talos Circular Sliding Doors
5
Basic equipment
Revolving Doors RDR
RDR-E01
Note
Construction Outside diameter
2100 – 3700
Entrance and escape route width
See schedule page 11.
Total height
2300
Passage height
2100
Body top
200
Number of door wings
Rotary cycle
4 or 3 (optional).
180° or 120° (optional).
Additional feature
Optional: resistance class WK 2 (RC 2).
Body
Side panels
With glazing 8 mm laminated glass, alternative metal cladded.
Thermal separation
On facade level.
Safety strips
Top cover/ceiling
Maintenance openings
Rotating unit
Top cover raw aluminium plate, dust-proof.
Two, in the lower ceiling plate.
Framed in aluminium profiles T40.
Tempered safety glass.
With sealing brushes.
Black U-shaped handles.
Bolt lock prepared for profile cylinder on-site.
Finish
Powder coated in a RAL colour or silver anodized.
Function
Free motion manually, smooth running.
Installation
On finished floor level (FFL).
All dimensions in mm
6
Talos Revolving Doors/Talos Circular Sliding Doors
RDR-C01
Additional options in comparison to RDR-E01.
2100 – 3700
See schedule page 11.
2300
2100
200
4 or 3 (optional).
180° or 120° (optional).
Optional: resistance class WK 2 (RC 2), WK 3.
With glazing 8 mm laminated glass, alternative metal cladded.
On facade level.
Top cover raw aluminium plate, dust-proof.
Two, in the lower ceiling plate.
350
DR
Framed in aluminium profiles T40.
Tempered safety glass.
With sealing brushes.
Black U-shaped handles.
DH = 2100
GH = DH + DR
Bolt lock prepared for profile cylinder on-site.
Powder coated in a RAL colour or silver anodized.
Free motion manually, smooth running.
1050
On finished floor level (FFL).
DH = 2100
GH = DH + DR
DR
350
1050
official member of
Ø2000 - Ø3600
Ø2100 - Ø3700
Talos Revolving Doors/Talos Circular Sliding Doors
7
Basic equipment
Revolving Doors RDR
RDR-C03
Note
Including emergency escape function, activation by means of emergency off-switch located at inner corner post.
Construction Outside diameter
2100 – 3700
Entrance and escape route width
See schedule page 11.
Total height
2300
Passage height
2100
Body top
200
Number of door wings
4 or 3 (optional); on centrical bearings.
Rotary cycle
180° oder 120° (optional).
Additional feature
On request.
Body
Side panels
With glazing 8 mm laminated glass, alternative: metal cladded.
Thermal separation
On facade level.
Safety strips
On opposite shearing edges.
Top cover/ceiling
Top cover raw aluminium plate, dust-proof.
Maintenance openings
Two, in the lower ceiling plate.
Framed in aluminium profiles T56.
Rotating unit
Tempered safety glass, including break-out symbols to stick on the door wings.
With sealing brushes.
Black U-shaped handles.
Safety bars
Horizontal and vertical at the door wings.
Two bar bolts to lock the rotating unit to the top and to the bottom.
Finish
Powder coated in a RAL colour or silver anodized.
Function
Fully automatic K8-SA1 with OPL 01 and KGB emergency escape module.
Start of motion by means of infrared sensors.
Reverse push-button in the entrance sectors.
Two push-buttons, Ø 20, for those with reduced mobility.
Two emergency off-switches.
Electrical components
Control system integrated in the unit.
Installation
On finished floor level (FFL).
Power supply 230 VAC, 50 Hz.
All dimensions in mm
8
Talos Revolving Doors/Talos Circular Sliding Doors
RDR-S01
RDR-C02
2100 – 3300 (in case of T40 3700)
3920 - 4920
See schedule page 11.
See schedule page 11.
2230
2400
2100
2200
130
200
4 or 3 (optional).
4 or 3 (optional); on centrical bearings.
180° or 120° (optional).
180° or 120° (optional).
Optional WK2.
With glazing 8 mm laminated glass.
With glazing 8 mm laminated glass, alternative: metal cladded.
On facade level.
On facade level.
Glass ceiling consisting of 2 laminated glass segments.
Top cover raw aluminium plate, dust-proof.
Framed in aluminium profiles T25 (Ø 3700 T40).
Framed in aluminium profiles T56.
Tempered safety glass.
Tempered safety glass.
With sealing brushes.
With sealing brushes.
Black U-shaped handles..
Without handles.
Bar-lock prepared for profile cylinder on-site (closing downwards).
Two bar bolts prepared for profile cylinder on-site.
Powder coated in a RAL colour or silver anodized.
Powder coated in a RAL colour or silver anodized.
Free motion manually, smooth running.
SA3 servo drive with OPL 03, rotates at walking speed.
On opposite shearing edges.
In the lower ceiling plate.
Horizontal and vertical at the door wings.
1000
DR
Start of motion by means of infrared sensors.
Two pre-sensors, installed in ceiling plate.
DH=2200
GH=DH+DR
Reverse push-button in the entrance sectors.
Two push-buttons, Ø 20, for those with reduced mobility.
Two emergency off-switches.
1050
Control system integrated in the unit.
Power supply 230 VAC, 50 Hz.
On finished floor level (FFL).
DH=2200
GH=DH+DR
DR
1000
1050
On finished floor level (FFL).
2557-3264
Ø3800-Ø4800
Ø3920-Ø4920
Talos Revolving Doors/Talos Circular Sliding Doors
9
Basic equipment
Circular Sliding Doors CSD
CSD-C01
CSD-C02
Construction Outer diameter
2000 - 4100
2000 - 4100
Passage and escape route width
See schedule page 11.
See schedule page 11.
Total height
2300
2300
Passage height
2100
2100
Body top
200
200
Number of door wings
4
2
Body
Side panels
With glazing 8 mm laminated glass,
alternatively metal cladded.
With glazing 8 mm laminated glass,
alternatively metal cladded.
Thermal separation
On facade level.
On facade level.
Safety strips
On corner posts (opposing closing edge).
On corner posts (opposing closing edge).
Top cover/ceiling
Top cover raw aluminum plate, dust proof.
Top cover raw aluminum plate, dust proof.
Maintenance openings
Removable ceiling panels.
Removable ceiling panels.
With circumferential light alloy profiles.
With circumferential light alloy profiles,
Laminated glass VSG 8.
Laminated glass VSG 8.
Sliding wings
Inner and outer doors two-winged.
Two-winged.
Finish
Powder-coated in a RAL color, silver
anodized C0, stainless steel cover plates
(glossy finish or ground).
Powder-coated in a RAL color, silver
anodized C0, stainless steel cover plates
(glossy finish or ground).
Function
2 drives with control in upper body part and
6 infrared motion detectors.
1 drive with control in upper body part and
3 infrared motion detectors.
Installation
On structural floor level SFL,
measure X = 60 – 79.
On structural floor level SFL,
measure X = 60 – 79.
600
DR
DH 2100
GH = DH + 200
GH = DH + 200
X
DH 2100-3500
DR
600
000
00-4
Ø 19
80°
80°
DB= Ø/2*1,284-70
DB= Ø/2*1,284-70
All dimensions in mm
10
Talos Revolving Doors/Talos Circular Sliding Doors
Ø 2000-4100
Ø1990-4090
Schedules
RDR-E01 / RDR-C01
RDR-C03
RDR-S01
RDR-C02
CSD-C01
CSD-C02
Ø outside
Ø inside
passage width
2100
2200/2300
2400/2500
2600/2700
2800/2900
3000/3100
3200/3300
3400/3500
3600/3700
2000
2100/2200
2300/2400
2500/2600
2700/2800
2900/3000
3100/3200
3300/3400
3500/3600
1332
1402/1474
1544/1615
1685/1756
1826/1897
1968/2039
2109/2180
2251/2322
2392/2463
Ø outside
Ø inside
passage width
escape route width
2100
2200/2300
2400/2500
2600/2700
2800/2900
3000/3100
3200/3300
3400/3500
3600/3700
2000
2100/2200
2300/2400
2500/2600
2700/2800
2900/3000
3100/3200
3300/3400
3500/3600
1300
1370/1440
1510/1580
1650/1720
1790/1860
1930/2000
2070/2140
2210/2280
2350/2420
925
975/1025
1075/1125
1175/1225
1275/1325
1375/1425
1475/1525
1575/1625
1675/1725
Ø outside
Ø inside
passage width
2100
2300
2500
2700
2900
3100
3300
3700
2000
2200
2400
2600
2800
3000
3200
3600
1332
1474
1615
1756
1897
2039
2180
2463
Ø outside
Ø inside
passage width
escape route width
3920
4120
4320
4520
4720
4920
3800
4000
4200
4400
4600
4800
2557
2698
2839
2981
3122
3264
1825
1925
2025
2125
2225
2325
Ø outside
Ø inside
passage width
2000
2100
2300
2500
2700
2900
3100
3300
3500 (Dual)
3700 (Dual)
3900 (Dual)
4100 (Dual)
1900
2000
2200
2400
2600
2800
3000
3200
3400
3600
3800
4000
1140
1210
1340
1470
1600
1725
1855
1980
2110
2240
2370
2500
Ø outside
Ø inside
passage width
2000
2100
2300
2500
2700
2900
3100
3300
3500 (Dual)
3700 (Dual)
3900 (Dual)
4100 (Dual)
1900
2000
2200
2400
2600
2800
3000
3200
3400
3600
3800
4000
1140
1210
1340
1470
1600
1725
1855
1980
2110
2240
2370
2500
Talos Revolving Doors/Talos Circular Sliding Doors
11
RDR-C03
RDR-S01
RDR-C02
Increase of passage height.
Increase of body top.
Glass ceiling without frame (side panels 12 mm laminated glass).
Water tray or waterproof cover of outer part of body, in aluminium.
Insulation of body top outside.
Resistance class P4A, shatter resistant glazing of body and rotating unit or rotating unit in P4A combined with
metal side panels in resistance class WK 2 (RC 2).
Miscellaneous night slides.
Motor for night slides.
Monitoring of night closure, notification of status closed or closed and locked.
Rotating unit 3 wings (120°).
Rotating unit T40, VSG in resistance class P4A.
Rotating unit T25 or T40 foldable, every wing is manually foldable, including bolt-lock and separate contacts for
electrical transmission, up to outside Ø 3300.
Stainless steel handle horizontal or vertical, installed on door wings.
Monitoring of locking closing upwards (not -S01) or downwards.
Floor element in stainless steel for advance installation.
Drive fixation in floor pit or as underfloor suspension drive.
Stainless steel tub for outside floor ring (connection to draining).
Sealing foil at the outer radius or in facade axis.
Clamping rail for fixing of sealing foil.
Stainless steel plate, may be perforated, to apply floor covering.
Stainless steel frame/fitting panel for floor element.
Cleaning mats or black rubber mat (optionally equipped with arrow) or carpet as cleaning zone.
RDR-C01
Construction
RDR-E01
Options for RDR Revolving Doors dependant on unit type
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Finish
Stainless steel AISI 304 satin finish or mirror finish S8.
Finish E6 anodised in colour.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Function
Speed control to prevent too strong speeding up of door (recommended).
SA1 servo positioning drive turns rotating unit into passaging speed (starting by manual push), including
electric transmission kit, safety strips horizontal and vertical, key switch for free turning of door, release button
(reverse push-button), two emergency off-switches and two handicapped buttons ø 20, optionally with OPL 01.
SA1-stage of extension.
Locking on demand BV1.
SA2 servo positioning drive, turns rotating unit into basic position; including key switch for free turning of door,
finger protection strips on the bottom of door wings and two emergency off-switches, optionally with OPL 02 as well as
locking on demand BV2.
Function day-/night access, activation by included key-switch (locking on demand necessary).
Transport opening.
•
Electrical components
Infrared (not with C02, standard with -C03) or radar motion detectors for automatic starting.
Handicapped buttons 70 x 70 in console 4 with wheelchair symbol, alternatively to the handicapped buttons existing with SA1.
Different consoles.
Key button or switch.
Operating panels OPL 01 or OPL 02, functions can be chosen freely.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Emergency stop push-button with seal cap instead of the existing one.
•
•
•
•
•
Two pre-sensors in case of heavy rotating units, for additional safeguarding of person groups
who have to be especially protected.
•
•
•
•

•
•
•
•
•
•
•
•
ensor rails to reduce speed of rotating unit when pedestrian is detected by sensors
S
Lighting 2 - 4 halogen spots.
Lighting 3, 4, 6, 8, 9, 12, halogen spots.
All dimensions in mm
12
Talos Revolving Doors/Talos Circular Sliding Doors
•
 = Standard
Safety device
CSD-C02
Construction
Increase of passage height.
Increase of body top.
Insulation of body top outside.
Water tray or waterproof cover of outer part of body, in aluminum.
Resistance class P4A, impact-resistant glazing of body and door wings.
Heater band with thermostat (outside only) at floor rail level.
Air curtain.
Floor element; stainless steel floor ring for pre-installation.
Stainless steel tub for outside floor ring (connection to draining).
Stainless steel plate, may be perforated, to apply floor covering.
Stainless steel fitting panel for floor element.
Sealing foil at the outer radius or in facade.
Clamping rail for fixing of sealing.
Charcoal-greycoir matting (rep).
Carpet as cleaning zone.
CSD-C01
Options for CSD Talos Circular Sliding Doors
depending on product type
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Finish
Stainless steel AISI 304 satin finish or mirror finish S8.
Finish E6 anodized in color.
Glass or metal body and door wings powder coated in custom color.
Function
Dual drive upgrade.
Function day-/night access, activation by included key-switch (locking on demand necessary).
Escape route function including dual drive.
Electric components
Battery pack for the inside door wings.
Radar motion detectors for automatic starting.
Various consoles.
Key button or switch.
Light curtain on inner door radius for protection of passage area
(required for people in need of special protection).
Emergency stop push-button for installation in the middle post or for installation on customer’s walls in the
area of the circular sliding door near drive or redundancy drive.
Lighting 2 - 8 halogen spots.
Safety device
Console 1
in plastic
in RAL 9006
e.g. for installation of
contactless reader
width height
depth 94 mm
94 mm
65 mm
Console 4
in stainless steel
satin finish
width 118 mm
height 93 mm
depth 60 mm
Console 5
in stainless steel
satin finish
Release push-button
OPL 01
OPL 02
OPL 03
Key switch
width 118 mm
height 164 mm
depth 60 mm
Talos Revolving Doors/Talos Circular Sliding Doors
13
Rotating units RDR
Rotating unit T25 – 120°
Outside diameter: Ø 2100 bis Ø 3300
1. toughened glass
2. safety strip
3. sealing brush
4. safety strip (with SA1)
5. finger protection strip
(with SA2, N0 and N0-LR)
Rotating unit without centre column.
Depth of profiles 25 mm.
Rotating unit T25 – 180°
Outside diameter: Ø 2100 bis Ø 3300
1. toughened glass
2. safety strip
3. sealing brush
4. safety strip (with SA1)
5. finger protection strip
(with SA2, N0 and N0-LR)
Rotating unit without centre column.
Depth of profiles 25 mm.
Rotating unit T40 – 120°
Outside diameter: Ø 2100 bis Ø 3700
1. laminated glass
2. safety strip
3. sealing brush
4. safety strip (with SA1)
5. finger protection strip
(with SA2, N0 and N0-LR)
Rotating unit with centre column.
Depth of profiles 40 mm.
Rotating unit T40 – 180°
Outside diameter: Ø 2100 bis Ø 3700
1. laminated glass
2. safety strip
3. sealing brush
4. safety strip (with SA1)
5. finger protection strip
(with SA2, N0 and N0-LR)
Rotating unit with centre column.
Depth of profiles 40 mm.
All dimensions in mm
14
Talos Revolving Doors/Talos Circular Sliding Doors
Rotating unit T56 – 120° – escape function
Outside diameter: Ø 2100 bis Ø 3700
1. laminated glass
2. safety strip
3. sealing brush
4. safety strip
5. finger protection strip
Rotating unit with centre column
and escape function.
Depth of profiles 56 mm.
Rotating unit T56 – 180° – escape function
Outside diameter: Ø 2100 bis Ø 3700
1. laminated glass
2. safety strip
3. sealing brush
4. safety strip
5. finger protection strip
Rotating unit with centre column
and escape function.
Depth of profiles 56 mm.
All dimensions in mm
Talos Revolving Doors/Talos Circular Sliding Doors
15
Floor elements for RDR types
Floor element without stainless steel frame
for sealing
Floor element with stainless steel frame for
sealing
Detail: floor element with sealing foil at the
outer radius
1. sealing foil 300 mm (self adhesive) or foil
on-site
2. stainless steel elbow fitting
3. stainless steel ring (25 mm)
4. clamping rail with welded stud M8
5. fitting panel
X: installation depth SFL to FFL
Detail: floor element with sealing foil in
facade axis
1. sealing foil 300 mm (self adhesive) or foil
on-site
2. stainless steel elbow fitting
3. stainless steel strut for connection and
support
4. installation of bearing on the floor
5. fitting panel
X: installation depth SFL to FFL
All dimensions in mm
16
Talos Revolving Doors/Talos Circular Sliding Doors
Drive box for floor pit
Stainless steel plate for floor element
Stainless steel plate for floor element –
perforated (for drainage)
Floor element with water tray
All dimensions in mm
Talos Revolving Doors/Talos Circular Sliding Doors
17
Alternative body types for RDR
Body with floor element
Body with dustproof cover
Body with waterproof cover
Body with water tray and drain pipe
All dimensions in mm
18
Talos Revolving Doors/Talos Circular Sliding Doors
Body with night closure
Body – glass ceiling with frame
Body – glass ceiling with point fixing
Body – glass ceiling without frame
In case of integration of the RDR-S01 into the facade axis we recommend an additional weather
protection by a roof with an appropriate down-grade.
All dimensions in mm
Talos Revolving Doors/Talos Circular Sliding Doors
19
Connections RDR
Example for wall connection 200 on top side
Subsurface drive
All dimensions in mm
20
Talos Revolving Doors/Talos Circular Sliding Doors
Example for lateral wall connection 200
Assembly diagram
For instance Talos RDR-E01 (rotary cycle 180°), with emergency escape door according to DIN EN 179
Escape route
All dimensions in mm
Talos Revolving Doors/Talos Circular Sliding Doors
21
Notes
22
Talos Revolving Doors/Talos Circular Sliding Doors
Notes
Talos Revolving Doors/Talos Circular Sliding Doors
23
© Kaba Gallenschütz GmbH, www.kaba.com/PAS, subject to modifications · 31691E 01•2013