CP106 Relay Switch for SupaSMART,
SMARTGUARD and CP77 Maglock Interface
This optional controller interfaces with the open collector output
(CH2/CH3) of either the SupaSMART multi-user receiver or the
SMARTGUARD keypad to provide a potential-free contact
(normally-closed/normally-open).
It can be used to operate a door lock, gate motor, roller-shutter
operator, traffic barriers, etc.
It can also be used as a relay interface to operate a magnetic
lock with a CP77 controller.
Refer to the following diagrams for detailed connection
instructions:
44mm
24mm
29mm
38mm
C
Light
C
Relay Card (CP106)
13 14 15 16
CP77 Controller Card
Physical dimensions
Magnetic Lock Connections
COM
CH
+
NC
CHD
NO
Output of CP106 is a
potential-free contact
Red
Blue
Height of card - 16mm
Magnetic Lock
12V DC ONLY
CP106
Programming
Console
TRG
SupaSMART connections
COM
SMARTGUARD connections
Power Supply
12 - 24V DC/AC
Supply voltage:
Product code:
1
Technical specifications
Relay Card (CP106)
NC
NO
V+
Or
Output of CP106 is a
potential-free contact
V-
CH
+
CH
-
1
2
3
RX
+
RX RXD
-
Output 2
Output 3
Or Or
Relay Card (CP106)
CH
+
1 2 3 4 5 6 7 8 9
CHD
COM
NC
NO
Output of CP106 is a
potential-free contact
0.07.A.0236_03062014
www.CentSys.com
TRG
CHD
COM
COM
CH
+