• The flooring shall be SaarFloor-Systems Noppe Stud tile as supplied
by Polyflor Ltd. of Manchester, England.
• The flooring shall be a high-grade synthetic rubber tile, 500 x 500mm in
3.0mm or 4.0 mm thickness.
• The flooring shall have low profile circular studs, to provide slip
resistance and easy maintenance.
• The flooring material shall conform fully with the requirements
of EN 12199.
RU B B E R
F LO O R I N G
• In accordance with EN 12199, the in-use classification must be at
least 23/32/41 for 3.0mm and 23/34/43 for 4.0mm thickness, as
described in EN 685, i.e. 3.0mm: domestic areas with heavy use,
commercial areas with general traffic use and light industrial areas with
moderate use. 4.0mm: domestic areas with heavy use, commercial areas
with very heavy use and light industrial areas with heavy use.
• The studded rubber flooring shall be 500 x 500mm, square, with studs of
diameter 28.5mm at the base and 0.5mm in height.
• In respect of flamespread, the flooring shall have been fully tested to EN
13501-1 and certified as having Class Cfl-S1, achieving the criteria
EN ISO 9239-1 ≥4.5kw/m2 and the mandatory requirement of
EN ISO 11925-2 pass.
• The flooring material must be resistant to cigarette burns as classified by
EN 1399.
• With regard to EN 13893 for slip resistance, the flooring shall be classified
as DS, making it suitable for use in dry areas.
• In respect of light fastness, the flooring shall have been fully tested
to ISO 105-B02 Method 3 and meet at least 6 on the blue wool scale.
NOPPE STUD TILE
P R O D U C T S P E C I F I C AT I O N
• The flooring will achieve a generic BRE A+/A rating in major commercial use
areas.
• A full Environmental Report detailing Polyflor's achievements in areas such
as recycling, energy reduction and waste avoidance can be found at
www.polyflor.com/environment.
• The flooring shall be tested to and pass a key independent, international
standard for low VOC emissions.
• The supplier of the floorcovering must be in possession of a valid quality
systems certificate showing compliance with BS EN ISO 9001: 2000.
• The supplier of the floorcovering must be in possession of a valid
environment certificate showing compliance with ISO 14001.
• A moisture test must be carried out to ensure that the subfloor has
dried out to a level consistent with the application of rubber flooring.
The test should be carried out using a hygrometer in accordance with
the instructions in BS 8203. The result should not exceed 75% RH,
once equilibrium has been achieved.
• The adhesive used must be approved by Polyflor to ensure full
product compatibility.
• Products must be fully conditioned to the environment in which they
are to be installed as outlined by Polyflor.
• Installation must be carried out in accordance with BS 8203 and the
instructions of Polyflor.
Refer to BRE Global ratings
on www.thegreenguide.org.uk
• SaarFloor-Systems Noppe Stud Tile is suitable for very heavy
commercial use in areas of high public circulation such as shopping
malls, train stations, airports, department stores, hospitals,
educational establishments and other public buildings.
• Prolonged exposure to oil, grease and fats causes deterioration.
SaarFloor-Systems Noppe Stud Tile is suitable for areas where
spillage is infrequent, but not garage workshops or food preparation
areas. SaarFloor-Systems Noppe Stud Tile is not recommended for
exterior use or swimming pool surrounds.
EN 12199
• At the date of issue the data presented is correct.
However, Polyflor Ltd. reserve the right to make changes which do not
adversely affect performance or quality.
POLYFLOR LTD. PO BOX 3 RADCLIFFE NEW ROAD WHITEFIELD MANCHESTER M45 7NR UK
UK SALES DIRECT: +44 (0)161 767 1122 UK SAMPLE REQUESTS: +44 (0)161 767 2551
EXPORT SALES DIRECT: +44 (0)161 767 1913 TECHNICAL SUPPORT: +44 (0)161 767 1912
RECEPTION: +44 (0)161 767 1111 UK FAX: +44 (0)161 767 1128
EXPORT FAX: +44 (0)161 767 1166 E-MAIL: [email protected]
WEBSITE: WWW.POLYFLOR.COM
May 2014