Built-In Full-Size Uninsulated Heated Wells

Project
Item #
Quantity
Built-In Full-Size Uninsulated
Heated Wells
Models: HWBL-FUL, -FULD, -FULDA
HWB-FUL, -FULD, -FULDA
HWBH-FUL, -FULD, -FULDA
Hatco Built-In Rectangular Heated Wells provide
flexibility and quality, with many options to choose
from. These units hold steam table food hot
and fresh with thermostats that read the actual
temperatures and add heat only when needed.
HWB-FUL
with optional cord
Options
(available at time of purchase only) Power Supply Lead Wire available in one foot
(305 mm) increments (Lead wire only – conduit not included)
(Models are shipped with 1’ [305 mm] of lead wire – no conduit included)
c HWB-FUL with Optional Cord
Control Box (Options not available for Auto-fill):
c Standard Thermostat with 6' (1829 mm) Capillary (Standard 120V)
c ITC Control with Large Control (Not available for low watt, auto-fill configurations or units without a drain)
c Larger Recessed Thermostatic Control (Standard for 220/240V and not
available for auto-fill configurations)
c WM Control Assembly Replacement (Not available for auto-fill or export models)
Control Box Bezel in Designer Colors for WM Control Assembly or Flush Mount only:
(not available for the HWB-FUL w/Cord, Non-standard colors are non-returnable)
c Warm Red
c Black
c Gray Granite c White Granite
c Navy Blue
c Hunter Green
c Antique Copper
Left or Right Water Fill Hole for HWBL-, HWB-, HWBH-FULDA only (Front is standard)
c Right
c Left
c Additional
Standard features
• Uninsulated rectangular full-size well in top or bottom
mount
• Superior thermostat controls that read the actual
temperature of the well and add heat only if needed
• Controls feature a separate lighted ON/OFF rocker switch
and temperature dial, allowing preset temperatures to be
maintained
• Low (120V only), Standard and High Watt available
• Available with or without a drain (50% larger drain with flat
screen simplifies cleaning and holds pans level)
• EZ locking hardware for quick installation
• Thicker stainless steel construction and solid brazed
joints for durability
Accessories
Rectangular Full-Size Stainless Steel Food Pans:
c Third-Size (2.5" [64 mm] H) c Half-Size (2.5" [64 mm] H)
c Full-Size (2.5" [64 mm] H) c Full-Size (4" [101 mm] H)
c Full-Size (6" [152 mm] H)
Round Food Pans:
c 4 Quart (4 Liter) c 7 Quart (7 Liter)
Hinged Lid for Round Pans:
c 4 Quart (4 Liter) c 7 Quart (7 Liter)
Notched Lid for Round Pans:
c 4 Quart (4 Liter) c 7 Quart (7 Liter)
Stainless Steel Wire Trivets:
c Full-Size
c Half-Size
Adapter to Convert Warmers to hold Round Pans:
c Holds three 4-Quart (4-Liter) Inserts c Holds two 7-Quart (7-Liter) Inserts
Support Bars:
c 12" (305 mm) c 20" (508 mm)
Mounting Kit for:
c Combustible Countertops c Thick Countertops
c ¾" Ball Valve for Unit with Drains
c ¾" Gate Valve for Unit with Drains
c Heated Well Remote Handle for ¾" drains (Includes a Ball Valve)
• Easy service access to heating elements and thermostats
• Accessory mounting kits for combustible countertops
available
• Accessory adapters to convert full-size wells to hold
round pans
• Available in a standard front or optional right or left autofill location
HATCO CORPORATION
(800) 558-0607
Form No. HWB-FUL Spec Sheet
l
(414) 671-6350
HWB-FULD with accessory
food pan
l
l
P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
www.hatcocorp.com
[email protected]
l
Page 1 of 4
January 2017
Built-In Full-Size Uninsulated Heated Wells
Models: HWBL-FUL, -FULD, -FULDA, HWB-FUL, -FULD, -FULDA, HWBH-FUL, -FULD, -FULDA
Ordering Instructions
(Please specify the following with each order)
1.Desired Voltage: 120, 208, 220 or 240V
(export voltage available)
2.Drain (With or without)
3. Auto-fill (With or without)
A. Front location (Standard)
B. Left location
C. Right location
HWB-FUL Series
4. Mounting Style
A. Top Mounted
B. Bottom Mounted
5. Wattage
A. High Watt
B. Standard Watt
C. Low Watt (120V only)
6. Agency:
A. UL, C-UL
B. UL-EPH (Sanitary listing)
C. CE mark available
HWB-FUL Series (Uninsulated Top Mount With Optional Cord)
(Uninsulated-Shown with Standard Control)
13.7"
(348 mm)
13.7"
(348 mm)
21.78" (553 mm)
2.0"
(51 mm)
4.77"
(121 mm)
8.56"
(217 mm)
36" (914 mm)
FLEXIBLE CONDUIT
SIDE VIEW
8.56"
(217 mm)
Bracket
can be
mounted
on the
front,
right or
left side
14.69"
(373 mm)
36" (914 mm)
("Rectangular"
cut-out)
SIDE VIEW
FRONT VIEW
FRONT VIEW
Non-Combustible
Countertop
(B)
Cutout Dimensions
for Non-Combustible
Countertops Opening
(A)
(B)
Optional drain
fitting ¾" NPT
FLEXIBLE
CONDUIT
CONTROL
3.55" (90 mm)
Non-Combustible
Countertop
Opening
Non-Combustible
("Rectangular"
Countertop
cut-out)
Opening
21.78" (553 mm)
(A)
Non-Combustible
(A)
(B)
("Rectangular"
Countertop
Model
cut-out)
Opening
Minimum(B)Width (A)
Maximum Width (A)
Minimum Depth (B)
Maximum Depth (B)
("Rectangular"
HWB-FUL
Series
cut-out)
12.625" (321 mm)
12.94" (328 mm)
20.625" (524 mm)
20.94" (531 mm)
12.94" (328 mm)
20.625" (524 mm)
20.94"
3.44"(531 mm)
(A)
HWB-FULDA Series 12.625" (321 mm)
(with bezel)
Cutout Dimensions for Combustible Countertops s Combustible
Countertop
Opening
Combustible
("Rectangular"
Countertop
cut-out)
Opening
(B)
(B)
("Rectangular"
cut-out)
Minimum Width (A)
Maximum Width (A)
Minimum
4.77" Depth (B)
Maximum Depth
4.63" (B)
Combustible
HWB-FUL
Series
14" (356 mm)
(A)
14.25" (362 mm)
22" (559 mm)
22.25" (565 mm)
14" (356 mm)
(A)
14.25" (362 mm)
(B)
Countertop
("Rectangular"
Opening
cut-out)
HWB-FULDA
Series
(A)
(B)
("Rectangular"
cut-out)
Standard Control
Panel
(with bezel)
ModelCombustible
Countertop
Opening
(A)
3.44"
(87 mm) 3.44"
(87 mm)
(A)
(with bezel)
Control Box Opening
(Larger Recessed
4.77"
Thermostatic shown)
(A)
(121 mm)4.77"
(B)
Control Box Opening
(121 mm)
(Larger Recessed
Thermostatic shown)
(B)
2.0"
(87 mm)
Control Box Opening
(Thermostatic
4.63" or Infinite
shown)
(117 mm)4.63"
Control Box Opening
(117
mm)
(Thermostatic or
Infinite
(Standard shown)
for
(A)
(121 mm)
3.55"22" (559 mm) 2.0"
(51 mm)
(90 mm)
s
Accessory
(117 mm)
(Standard for
HWB-Cord,
22.25"
(565 mm)
without bezel)
2.0"
(51 mm)
Mounting Kit required for Top Mounts
Thermostatic
Standard Control Panel
for International
Models Only10°
10°
CONTROL
PANEL CONTROL
PANEL
(A)
(B)
7.81"
(198 mm) 7.81"
(198 mm)
(1
Standard Control Panel
for Auto-fill
Only
10°
3.95"
10°
CONTROL
(100 mm)
10.94"
(278CONTROL
mm)
PANEL
PANEL
6.25"
7.81"
5.5"
(159 mm) 6.25"
(198
mm)
(140
mm)7.81"
(159 mm)
(198 mm)
(B)
(Standard for 2.0"
HWB-Cord,
5.875"
2.0"
HWB-Cord, (51 mm) 2.0"
without bezel)
3.95"
(149 mm) 5.875"
(51
mm)
(51 mm)
4.36"
6.39"
6.39"
without bezel)
3.68"
(149 mm) (100 mm) 3.95"
(111 mm) 4.36"
(162 mm) 6.39"
(162 mm) 6.39"
3.68"
(93
mm)
(100 mm)
Thermostatic
(111 mm) WM Assembly Replacement
(162 mm)
(162 mm)
(93 mm)
Thermostatic
Optional Larger
Assembly Replacement
(not availableWM
for International
Models)
Optional ITC Electronic
Optional Larger
Recessed Thermostatic
(not available for International Models)
Optional
ITC Electronic
for low watt
units
Recessed Thermostatic (not available
low watt units
and only(not
for available
units withfor
a drain)
3.95"
and only for units with a drain)
(100 mm) 3.95"
10.94" (278 mm)
3.44"
10°
10°
(100 mm)
(278 mm)
Optional
(87 Control
mm) 10.94"Panels
CONTROL
CONTROL
(with bezel) (not available for auto-fill)
PANEL
PANEL
5.5"
4.77"
(140 mm) 5.5" 4.63"
6.25"
(140 mm) (117 mm)
(121 mm)
7.81"
7.81"
(159 mm)
(198 mm)
(198 mm)
(Standard for
2.0"
2.0"
HWB-Cord,
5.875"
(51 mm)
(51 mm)
without bezel)
3.95"
(149 mm)
4.36"
6.39"
6.39"
3.68"
(100 mm)
(111 mm)
(162 mm)
(162 mm)
(93
mm)
Thermostatic
WM Assembly Replacement
Optional Larger
(not available for International Models)
Optional ITC Electronic
Recessed Thermostatic
(not available for low watt units
and only for units with a drain)
3.95"
(100 mm)
10.94" (278 mm)
3.55"
(90 mm) 3.55"
(90 mm)
(51 mm)
HATCO CORPORATION
(800) 558-0607
m)
Form No. HWB-FUL Spec Sheet
l
(414) 671-6350
l
l
P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
www.hatcocorp.com
[email protected]
l
Page 2 of 4
January 2017
Combustible
Countertop
Opening
Built-In
Full-Size Uninsulated Heated Wells
(A)
("Square" cut-out)
(B)Models:
HWBL-FUL, -FULD, -FULDA, HWB-FUL, -FULD, -FULDA, HWBH-FUL, -FULD, -FULDA
Cutout Dimensions for Control Boxes Control Box Opening
(Larger Recessed
Thermostatic shown)
(A)
(B)
Control Box
Width (A)
Height (B)
International
Models
Standard Thermostatic without bezel
2.16"
(55 mm)
3.375" (86 mm)
Not available
Standard Thermostatic with bezel
3.25"
(83 mm)
3.75"
Not available
Optional Larger Recessed Thermostatic
5.875" (149 mm)
6.375" (162 mm)
Standard
Optional ITC Electronic
(not available for 4-QT [4-Liter]) or Low Watt
5.875" (149 mm)
6.375" (162 mm)
Optional
Optional WM Assembly Replacement
4.78" (121 mm)
5.00" (127 mm)
Not available
10.125 (257 mm)
4.75 (121 mm)
Standard
Standard Auto-fill
Full Size Uninsulated Rectangular Models
Low Watt
Model
HWBL-FUL
HWBL-FULD
(Top or Bottom
Mount)
(Width x Depth x Height)
HWB-FUL
HWB-FULD
(Top or Bottom
13.7" x 21.78" x 8.56"
(348 x 553 x 217 mm)
HWB-FULDA
(Top or Bottom
Mount)
F Only
Volts
Watts
(Single Phase)
Amps
Optional HWB-Cord:
13.7" x 21.78" x 14.69"
(348 x 553 x 373 mm) F
13.7" x 21.78" x 8.56"
(348 x 553 x 217 mm)
Optional Plug
Hardwired Standard
Control ConfigurationF
Standard
Optional
120
750
Thermostatic
(with bezel)
WM Assembly or
Larger Recessed
Thermostatic
Auto-fill
None
Thermostatic
(with bezel)
WM Assembly,
Larger Recessed or
ITC Control*
(*HWB-FULD only)
Larger
Recessed
ITC Control
(HWB-FULD only)
Not Available
Auto-fill
None
Not Available
Auto-fill
None
6.3
NEMA 5-15P
Ship
Weight*
22 lbs. (10 kg)
Not Available
Optional HWB-Cord:
13.7" x 21.78" x 14.69"
(348 x 553 x 373 mm) F
13.7" x 21.78" x 8.56"
(348 x 553 x 217 mm)
Mount)
The shaded areas contain electrical information for International models only
13.7" x 21.78" x 8.56"
(348 x 553 x 217 mm)
HWBL-FULDA
(Top or Bottom
Mount)
Standard Watt
Dimensions
(95 mm)
30 lbs. (14 kg)
120
765
120
208
1200
240
220
240
220-230 (CE)
230-240 (CE)
1200
120
6.3
Not Available
10.0
NEMA 5-20P
5.8
NEMA 6-15P
5.0
5.5
5.0
5.5
5.0
NEMA 6-15P
CEE 7/7 SCHUKO
BS-1363 or AS 3112
CEE 7/7 SCHUKO
BS-1363
10.1
208
240
220
240
220-230 (CE)
230-240 (CE)
1215
5.8
1215
1215/1328
1116/1215
5.1
5.5
5.1
5.5/5.8
4.9/5.1
22 lbs. (10 kg)
30 lbs. (14 kg)
control for optional HWBI-Cord is the Thermostatic without a bezel
HATCO CORPORATION
(800) 558-0607
Form No. HWB-FUL Spec Sheet
l
(414) 671-6350
l
l
P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
www.hatcocorp.com
[email protected]
l
Page 3 of 4
January 2017
Built-In Full-Size Uninsulated Heated Wells
Models: HWBL-FUL, -FULD, -FULDA, HWB-FUL, -FULD, -FULDA, HWBH-FUL, -FULD, -FULDA
Full Size Uninsulated Rectangular Models
Model
HWBH-FUL
HWBH-FULD
(Top or Bottom
High Watt
Mount)
Dimensions
(Width x Depth x Height)
13.7" x 21.78" x 8.56"
(348 x 553 x 217 mm)
Optional HWB-Cord:
13.7" x 21.78" x 14.69"
(348 x 553 x 373 mm) F
The shaded areas contain electrical information for International models only
Volts
Watts
(Single Phase)
Amps
120
13.8
208
1650
7.9
Mount)
Larger
Recessed
ITC Control
(HWBH-FULD only)
Not Available
Auto-fill
None
Not Available
Auto-fill
None
NEMA 6-15P
7.5
CEE 7/7 SCHUKO
6.9
BS-1363 or AS 3112
7.5
CEE 7/7 SCHUKO
6.9
BS-1363
1650
120
1665
8.0
Ship
Weight*
22 lbs. (10 kg)
30 lbs. (14 kg)
13.9
208
240
6.9
220
7.6
1665
240
F Only
WM Assembly,
Larger Recessed or
ITC Control*
(*HWBH-FULD only)
220
230-240 (CE)
13.7" x 21.78" x 8.56"
(348 x 553 x 217 mm)
Thermostatic
(with bezel)
6.9
220-230 (CE)
HWBH-FULDA
(Top or Bottom
NEMA 5-20P
240
240
Control ConfigurationF
Standard
Optional
Optional Plug
Hardwired Standard
6.9
220-230 (CE)
1665/1820
7.6/7.9
230-240 (CE)
1529/1665
6.6/6.9
control for optional HWBI-Cord is the Thermostatic without a bezel
PLUG CONFIGURATIONS (Optional)
NEMA 5-15P
NEMA 6-15P
NEMA 5-20P
CEE 7/7 SCHUKO
PRODUCT SPECS
Built-In Rectangular Uninsulated Heated Wells
The Built-In Rectangular Uninsulated Heated Well with or without cord and plug shall
be a Model ….as manufactured by the Hatco Corporation, Milwaukee, WI 53234
U.S.A.
Built-in Rectangular Uninsulated Heated Well shall be rated at ….watts, ….volts,
and be….inches (millimeters) in overall width and be ….inches (millimeters) in overall
depth. It shall consist of stainless and aluminized steel housing with a metal sheathed
HATCO CORPORATION
(800) 558-0607
Form No. HWB-FUL Spec Sheet
l
(414) 671-6350
l
l
BS 1363
AS 3112
heating element, EZ locking hardware for installation, and a remote thermostat with
lighted power switch.
Accessories may include stainless steel mounting kit, adapter bars, adapter top,
support bars, food pans, remote handle and valves.
Warranty consists of 24/7 parts and service assistance (US and Canada only).
P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
www.hatcocorp.com
[email protected]
l
Page 4 of 4
January 2017