PRODUCT INFORMATION
Algaecide 60 Plus
For Algae control in pools
Kills and prevents green, yellow and black algae
Algae, while not harmful to bathers, do not belong in a properly operated swimming pool. If allowed to grow
freely, the pool quickly becomes unusable. Algae can make your pool water cloudy, clog filters, create
objectionable odors, increase chlorine demand and reduce effectiveness of other pool chemicals. Using a
good algaecide as part of regular pool maintenance is the best way to control these microscopic plants.
Algaecide 60 Plus is a highly concentrated liquid algaecide consisting of a cationic polymer, effective in
killing different types of algae.
BENEFITS
9 Broad spectrum – Effective on yellow, the greenish free-floating varieties of algae and black algae
that cling to the walls and bottoms of pools.
9 Non-foaming – Unlike the commonly used quaternary ammonium compounds, Algaecide 60 Plus
is specially formulated to be non-foaming even when added in high concentration slug doses,
thereby enhancing pool appearance.
9 pH tolerant – Is effective in both acidic and alkaline pH ranges, thereby eliminating the need to alter
pool chemistry prior to application.
9 Non-metallic – This product does not stain pool surfaces or swimmers’ hair.
9 No chlorine demand – Can be used in pools treated with chlorine chemicals and its use may
reduce the amount of chlorine chemicals normally required.
9 Compatible with all sanitizers – Is compatible with most chemicals commonly used to treat pools
and hence can be used by all.
9 Preventative & cure – Prevents algae growth, eliminates existing algae in pools and even prevents
growth of most algae during the winter months when pools are not in use.
DIRECTIONS FOR USE
POOLS
9 Initial dosage - For pools with just visible algae growth, add 11 to 17 ounces of Algaecide 60 plus
per 10,000 gallons of water and remove settled algae. Add 6-11 ounces of this product per 10,000
gallons of water while treating freshly cleaned and filled pools.
9 Maintenance dosage - Add 2 to 4 fluid ounces per 10,000 gallons of water every 5-7 days after
initial treatment for maintenance.
9 Winterizing - Add 6 to 10 fluid ounces of algaecide per 10,000 gallons of water for pools that have
been properly treated during the swim season and are free of visible algae. For pools with some
visible algae growth at the end of the swim season, add 12 to 17 ounces per 10,000 gallons of
water.
SPAS, WHIRLPOOLS, HOT TUBS, DECORATIVE FOUNTAINS AND PONDS
9 Initial Dosage - For spas with just visible algae growth, add 1 to 2 fluid ounces of algaecide per
1,000 gallons of water. For treatment of a freshly cleaned spa or whirlpool, add 0.6 to 1.1 fluid
ounces per 1,000 gallons of water.
9 Maintenance dosage – Add 0.2 to 0.4 fluid ounces every 5 to 7 days after initial treatment.
Note: For maximum effectiveness pools and spas containing heavy growth of algae should be cleaned prior
to using this product.
AVAILABILITY
Algaecide 60 Plus is available in 1 quart bottles.
THE INFORMATION AND RECOMMENDATIONS MADE HEREIN ARE BASED UPON ALLCHEM INDUSTRIES WATER TREATMENT GROUP, INC. BEST KNOWLEDGE AND EXPERIENCE, AND ARE BELIEVED TO BE RELIABLE. SUCH INFORMATION AND
RECOMMENDATIONS, HOWEVER, DO NOT CONSTITUTE A WARRANTY, AND NO PATENT LIABILITY CAN BE ASSUMED. THIS PUBLICATION IS NOT TO BE TAKEN AS A LICENSE TO OPERATE OR INFRINGE ON ANY PATENTS. SINCE ALLCHEM
INDUSTRIES, INC. HAS NO CONTROL OVER THE CONDITIONS UNDER WHICH THE PRODUCT IS TRANSPORTED, STORED, HANDLED, USED OR APPLIED, BUYER MUST DETERMINE THE SUITABILITY OF THE PRODUCT FOR HIS PURPOSES.
ALLCHEM INDUSTRIES, INC.’S LIABILITY ON ANY BASIS IS LIMITED TO THE PRICE OF THE PRODUCT USED.