Volleyball Floor Cover Plates
By
501034
8" Chrome Plated Floor Cover Plate
501001
5" Chrome Plated Floor Cover Plate
Polymer Cushion Pad (6)
5¼" O.D.
5" diameter
8" diameter
8-1/4" O.D.
7-3/16" I.D.
41/8" I.D.
Polymer cushion pad (8)
1/2"
Removable Key
Removable
Key
½"
#10 x 1-1/2" Flat Head Wood Screw (4)
#10 x 1½" Flat Head Wood Screw (3)
Specifications—501001
Specifications—501034
5" Chrome Plated Floor Cover Plate Assembly
8" Chrome Plated Floor Cover Plate Assembly
Chrome Plated Cover Plate Assembly shall be 501001 by Draper, Inc of
Spiceland, IN. Chrome plated cover plate assembly shall provide for use in
either synthetic or wood floors. Cover plate shall consist of a high-strength
molded urethane recessed mounting flange, 5¼" in diameter and a 5"
diameter chrome plated cover. Cover shall have a polished chrome finish.
Cover shall be equipped with a swivel type retaining pin to prevent theft. A
special key shall be provided for opening cover. Three #10 x 1½" phillips-head
wood screws shall be provided to securely mount cover plate assembly to
floor. Plate shall be installed flush with playing surface.
Chrome Plated Cover Plate Assembly shall be 501034 by Draper, Inc of
Spiceland, IN. Chrome plated cover plate assembly shall provide for use in
either synthetic or wood floors. Cover plate shall consist of a high-strength
molded urethane recessed mounting flange, 8¼" in diameter and a 8" diameter chrome plated cover. Cover shall have a polished chrome finish. Cover
shall be equipped with a swivel type retaining pin to prevent theft. A special
key shall be provided for opening cover. Four #10 x 1½" phillips-head wood
screws shall be provided to securely mount cover plate assembly to floor.
Plate shall be installed flush with playing surface.
LEED® Submittal Information
LEED® Submittal Information
Credit
MRc4 – Recycled Content
Measure
Post Consumer Average 36%
Credit
Post Industrial 7%
MRc4 – Recycled Content
Measure
Post Consumer Average 36%
PROJECT:
®
ARCHITECT:
CONTRACTOR:
SUPPLIER:
Copyright ©2009 Draper Inc. Form VB-FloorCoverPlates_Sub09
Printed in U.S.A.
DATE:
REVISED:
Post Industrial 7%
page 2 of 2
Volleyball Floor Cover Plates by Draper
501033
8" Brass Plated Floor Cover Plate
501031
5" Brass Plated Floor Cover Plate
Polymer Cushion Pad (6)
5¼" O.D.
5" diameter
8" diameter
8-1/4" O.D.
7-3/16" I.D.
41/8" I.D.
Polymer cushion pad (8)
1/2"
Removable Key
Removable
Key
½"
#10 x 1-1/2" Flat Head Wood Screw (4)
#10 x 1½" Flat Head Wood Screw (3)
Specifications—501033
8" Brass Plated Floor Cover Plate Assembly
Specifications—501031
5" Brass Plated Floor Cover Plate Assembly
Brass Plated Cover Plate Assembly shall be 501031 by Draper, Inc of
Spiceland, IN. Brass plated cover plate assembly shall provide for use in
either synthetic or wood floors. Cover plate shall consist of a high-strength
molded urethane recessed mounting flange, 5¼" in diameter and a 5"
diameter brass plated cover. Cover shall have a brushed brass finish. Cover
shall be equipped with a swivel type retaining pin to prevent theft. A special
key shall be provided for opening cover. Three #10 x 1½" phillips-head wood
screws shall be provided to securely mount cover plate assembly to floor.
Plate shall be installed flush with playing surface.
LEED® Submittal Information
Credit
LEED® Submittal Information
Credit
MRc4 – Recycled Content
Measure
MRc4 – Recycled Content
Brass Plated Cover Plate Assembly shall be 501033 by Draper, Inc of Spiceland, IN. Brass plated cover plate assembly shall provide for use in either
synthetic or wood floors. Cover plate shall consist of a high-strength molded
urethane recessed mounting flange, 8¼" in diameter and a 8" diameter brass
plated cover. Cover shall have a brushed brass finish. Cover shall be equipped
with a swivel type retaining pin to prevent theft. A special key shall be provided
for opening cover. Four #10 x 1½" phillips-head wood screws shall be provided to securely mount cover plate assembly to floor. Plate shall be installed
flush with playing surface.
Post Consumer Average 36%
Measure
Post Consumer Average 36%
Post Industrial 7%
Post Industrial 7%
501035
Locking Brass Floor Cover Plate
7½" O.D.
Outer
Ring
43/8" I.D.
Opening
Outer
Ring
Inner
Cover
Inner
Cover
#10 x 1½" Brass Flat
Head Wood Screw (6)
Locking Brass Floor Cover Plate Assembly
Locking Brass Cover Plate Assembly shall be 501035 by Draper, Inc of Spiceland, IN. Cover plate assembly shall be solid brass alloy with permanently
attached hinged cover. Cover plate assembly shall be 7½" outside diameter
by ½" thick. The diameter of opening shall be 43/8". Cover plate assembly features a lock mechanism that secures cover to ring preventing it from bouncing
or creating a dead spot if hit with a ball.
Outer ring shall have six mounting holes to allow cover pate to be securely attached to floor. Floor plate is supplied with six #10 x 1½" brass flat head wood
screws for mounting plate to floor. Plate shall be installed flush with playing
surface.
LEED® Submittal Information
Outer Ring
Credit
MRc4 – Recycled Content
½"
¼"
Inner Cover
Specifications—501035
www.draperinc.com
(765) 987-7999
Measure
Post Consumer Average 58%
Post Industrial 0%