EXPS Extruded Polystyrene Foam Boards
XPS
Main applications
Floors
Industrial floors
and cold rooms
Ballasted or paved
flat roofs
Roof gardens
Thermal insulation board of Polystyrene Foam extruded in a
single layer
Micro-ventilated
pitched roofs
Main aplication
Thermal insulation of flat, pitched and inverted roofs, cavities, residential
and industrial floors. Cladding insulation, house wraps, ground and/or
Roof Garden insulation.
Pitched Roofs
Specification wording
The thermal insulation shall consist of a layer of ISOLPARMA XPS
extruded polystyrene foam boards.
Thermal conductivity lD of .... W/mK according to UNI EN 13164.
Board size mm ... x ... , thickness mm....
Sizes and packaging
The boards are supplied with the following profiles:
V type with sharp edge
L type with lap joint edges
TG type with tongue and groove edges
Cavities
CE marking
Extruded
Polystyrene Foam
Insulation
(XPS)
The V and L, are supplied in a standard size of 600 x 1250 mm,
TG type boards are size 600 x 2800 mm.
The boards are packed in shrink wrap PE foil.
Quantities per package vary with thickness (see table overleaf).
Isolparma Srl - Via Mezzavia 134 - 35020 Due Carrare (PD) - Italy - tel +39 049 9126213 fax +39 049 9129616
www.isolparma.it
EXPS Extruded Polystyrene Foam Boards
XPS
TECHNICAL DATA SHEET
Properties
Code
UNI EN 13164
Norm
Description
Density
mm 20
mm 30, 40
from mm 50 to 120
mm 20
mm 30
mm 40
mm 50
mm 60
mm 80
mm 100
mm 120
mm 20
mm 30
from mm 40 to 120
linear variation
variation in thickness
XPS
Unit
30 ± 5%
kg/mc
0,031
0,034
0,036
0,65
0,88
1,18
1,39
1,37
2,22
2,78
3,33
150
200
300
2
2
Declared heat
conductivity
lD
UNI EN 12667
value measured at a mean temperature
of 10 °C
Declared heat
resistance
RD
UNI EN 12667
related to thickness
RD=d/lD
Resistance
to compression
CS (10/Y)
UNI EN 826
compression to 10%
of thickness
DS(TH)
UNI EN 1604
euroclass
UNI EN 13501-1
E
UNI EN 12524
1200
J/(KgK)
100 - 200
m
Dimensional stability
Fire rating
Specific heat
Resistance to water
vapour diffusion
MU
UNI EN 12086
Water absorption
by diffusion
WD(v)5
UNI EN 12088
Water absorption
by immersion
WL(T)0,7
UNI EN 12087
T1
UNI EN 823
Thickness tolerance
test conditions:
48 h, 70 °C, 90% RH
depending on surface
after 28 days, with moisture gradient
0%-100% between board sides and test
temperature 50°C
dN = 50 mm
<3
dN = 100 mm
<3
< 50
from 50 to 120
> 120
Using temperature
W/mK
(m2K)/W
KPa
%
%
% volume
> 0,5
% volume
± 2,0
+3,0 / -2,0
+8,0 / -2,0
mm
75
°C
Sizes and packaging
V type with sharp edge
L type with lap joint edges
TG type with tongue and
groove edges
thickness mm
board size mm
p.cs/package
m2/package
packages/pallet
20
30
40
50
60
70
80
thickness mm
30
40
50
60
70
80
thickness mm
30
40
600 x 1250
600 x 1250
600 x 1250
600 x 1250
600 x 1250
600 x 1250
600 x 1250
board size mm
600 x 1250
600 x 1250
600 x 1250
600 x 1250
600 x 1250
600 x 1250
board size mm
600 x 2800
600 x 2800
20
14
10
8
7
6
5
p.cs/package
14
10
8
7
6
5
p.cs/package
14
10
15,00
10,50
7,50
6,00
5,25
4,50
3,75
m2/package
10,50
7,50
6,00
5,25
4,50
3,75
m2/package
23,52
16,80
12
12
12
12
12
12
12
packages/pallet
12
12
12
12
12
12
packages/pallet
12
12
Technical Data Sheet issued in November 2007
Isolparma Srl - Via Mezzavia 134 - 35020 Due Carrare (PD) - Italy - tel +39 049 9126213 fax +39 049 9129616
www.isolparma.it