Overall width 3990mm (997.5mm @25%) with 500mm end panels
End panel
width 500mm
(125mm @ 25%)
Inner curve
panel width 700mm
(175mm @ 25%)
Inner curve
panel width 700mm
(175mm @ 25%)
Outer curve
panel width 795mm
(198.75mm @ 25%)
Outer curve
panel width 795mm
(198.75mm @ 25%)
End panel
width 500mm
(125mm @ 25%)
Overall height 2175mm (543.75mm @ 25%) for kickers/hangers or
2255mm (563.75mm @25%) if using hanging tabs
NB Please avoid
splitting characters
across panels :
Format
Please supply artwork in PDF, EPS,
Quark, Indesign, Freehand,
Illustrator or Corel 12 formats. We
suggest you work at 25% of final
size.
‘Press optimised’ PDF preferered,
with crop marks and embedded
fonts
Size
Artwork can be at 25% of final size
(ie 997.5x543.75mm)
Grey represents image area
Images
Images (photos, scans etc) should
be in CMYK format, and at a
resolution of 480dpi if working at
25% of final size (equal to 120dpi
at 100%)
Bleed
Please allow 3mm bleed all round
image area
NB this part of graphic
curves behind stand
and will therefore be
out of view
Allow 3mm bleed around image
Drawing scale 1:20
NB this part of graphic
curves behind stand
and will therefore be
out of view
IMPORTANT - please confirm system/hanging type
and amend height accordingly
Artwork specification for Mark Bric SnapUp Big Wave
MP1 4x3 pop-up stand (left side graphics on inside curve)
© MicroGraphics Colour Imaging 2012