Introduction
•
Braford Fibertex Building blankets are a general purpose
rockwool building blanket for use under metal deck or
fibre cement roofing.
Product Description
Applications
Fibertex Rockwool Building Blanket is designed to
provide efficient insulation, particularly under metal
deck or fibre cement roofing. Installation is usually
carried out by “sandwiching” the insulation between
the roofing membrane and galvanised wire mesh or
reinforced aluminium foil laminate, where a vapour
barrier system is required. This product is used in
applications that require high levels of noise reductions
in roofs or wall claddings.
Benefits
•
•
•
Bradford Fibertex Rockwool Building Blanket is a
medium density insulation for building applications.
Rockwool Building Blanket is manufactured from
spinning a molten mixture of natural rock and recycled
products into fine wool like fibres. The inorganic fibres
are bonded together using a thermosetting resin. The
product can be identified by its light brown appearance.
•
•
•
•
•
vailable in a range of thicknesses and dimensions to
A
suit application
Available in range of facings to meet requirements of
projects
Excellent and cost effective thermal insulation
Performance is not adversely effected from contact
with water
Non combustible
Biosoluble and safe to use product
Made in Australia
Available Facings
This product is available as either un-faced or flexiskin faced blanket. Additionally, a range of factory
applied reinforced laminated aluminium foil or plain
un-reinforced aluminium foil facings are available to
order. Also available are Antiglare foil, perforated foil,
and white coated foil. These facings may be subject to
minimum order quantities and longer lead times.
Health and Safety
This product is manufactured to the latest Fibre BioSoluble (FBS-1) Rockwool formulation and is not
classified as hazardous according to the criteria of the
ASCC (formally NOHSC) guidelines. For further
information refer MSDS sheet on Bradford website.
Highly durable insulation product
Performs in very high temperatures for application,
up to 350⁰C
SKU Table
Thickness (mm)
Length (mm)
Width (mm)
Pieces per Pack
Nom coverage
(sq.m)
Nominal Weight/
Pack (kg)
50
75
5000
5000
750
750
1
1
3.75
3.75
7.2
10.7
Standard packaging is polythene bags
Note: not all sizes are held in stock. Some are subject to minimum order quantities. Published weights are for product only and do not
include packaging.
ROCKWOOL BUILDING BLANKET – data sheet
ROCKWOOL BUILDING
BLANKET
Physical Properties
kg/m³
Density
38
350˚C
Maximum Service Temperature
Combustibility
When tested in accordance with
AS1530 Part 1:1994
Fire Hazard Properties
AS/NZS 1530.3:1999
Corrosion Resistance
AS/NZS 4859.1
When placed in a controlled
atmosphere of 50ºC and 95%
relatively humitdy for 96 hours.
Moisture Absorption
Publish date: 11/2011 Doc ref R BuildB - B
Sample Specification
• Non-combustible Pass
• Ignitability: 0
• Spread of flame 0
• Heat Evolved 0
• Smoke Developed 1
Complies
Less than 0.2% by volume.
The insulation material shall be Fibertex Rockwool Building
Blanket ___ mm thick (specify thickness) as
manufactured by Bradford Insulation. Install Bradford Rockwool
Building Blanket insulation in accordance with manufacturers
written installation instructions.
CSR Bradford Insulation
55 Stennett Rd, Ingleburn NSW 2565 Australia.
Telephone (02) 9765 7000 Facsimile (02) 9765 7002
www.bradfordinsulation.com.au
CSR Bradford Insulation is a business division of CSR Building Products Limited ABN 55 008 631 356
The contents of this brochure are copyright protected and may not be reproduced in any form without prior written consent of CSR Bradford Insulation. Recommendations and advice
regarding the use of the products described in this brochure are to be taken as a guide only, and are given without liability on the part of the company or its employees. We reserve
the right to change product specifications without prior notification, please refer to the Bradford website for the latest version of this document. The purchaser should independently
determine the suitability of the product for the intended use and application.
ROCKWOOL BUILDING BLANKET – data sheet
ROCKWOOL BUILDING BLANKET