DKA210LE_ADV
7/31/07
2:49 PM
Page 1
7
2
N
E
T
H
LE
O
R
S
E
P
O
W
E
LOADERS
210LE
ALL-WHEEL DRIVE
R
DKA210LE_ADV
7/31/07
2:50 PM
Page 2
DKA210LE_ADV
7/31/07
2:50 PM
Page 3
DKA210LE_ADV
7/31/07
2:50 PM
Page 4
DKA210LE_ADV
7/31/07
2:50 PM
Page 5
DKA210LE_ADV
7/31/07
2:50 PM
Page 6
DKA210LE_ADV
7/31/07
2:50 PM
Page 7
DKA210LE_ADV
7/31/07
2:51 PM
Page 8
FNR neutral safety switch
and automatic park brake
help prevent accidental
machine movement.
Doesn’t allow park brake
drive-through, either.
Exclusive PowerShift transmission delivers no-clutch
shifting on-the-fly for smooth
gear shifts and fatigue-beating
direction changes.
Electronic control unit lets
service technicians easily
retrieve vital operating
information and helps
diagnose problems more
quickly.
Easy to operate.
Mechanical-front-wheel drive and
rear axle differential lock engage
on-the-go for extra traction in
poor underfoot conditions or for
moving heavy loads. Limited-slip
MFWD is optional.
Low-profile sloped hood,
compact forward console,
loader arms that angle
outward, and two-post ROPS
allow unobstructed visibility.
Suspension seat swivels
15 degrees to the right for
extra visibility of rear tools.
Transmission disconnect,
automatic return-to-dig,
bucket self-leveling, and
float make an operator more
efficient and help speed
repetitive loading cycles.
PAGES
8–9
Three-point hitch controls
are conveniently positioned,
and hydraulic response is
consistent and quick.
DKA210LE_ADV
7/31/07
2:51 PM
Wet-disc brakes are fully
modulated and selfadjusting so they require
little effort or maintenance.
Page 9
Periodic maintenance chart
helps ensure that nothing
gets overlooked.
Expect low daily owning and
operating costs with the 210LE.
Its fuel-efficient Deere diesel runs
500 hours between oil changes.
Vertical spin-on filters simplify
fluid changes. Serpentine belt
self-adjusts.
Two-position tilt hood
provides quick ground-level
access to engine and
transmission dipsticks,
engine oil fill, fuel filter, and
coolant reservoir.
Easy to maintain.
DKA210LE_SPECS
7/31/07
2:06 PM
Page 10
Specifications
Engine
210LE
Manufacturer and Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . John Deere PowerTechTM 4045D naturally aspirated, standard / 4045T turbocharged, optional
Non-Road Emission Standards. . . . . . . . . . . . . . . . . . . . . . . . . certified to EPA Tier 2 emissions
Displacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276 cu. in. (4.5 L)
4045D
Turbocharged 4045T
Net Peak Power (ISO9249). . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 hp (54 kW) @ 2,000 rpm
80 hp (60 kW) @ 2,000 rpm
Net Peak Torque (ISO9249) . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 lb.-ft. (288 Nm) @ 1,000 rpm 253 lb.-ft. (344 Nm) @ 1,200 rpm
Net Torque Rise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32%
35%
Lubrication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pressure system with spin-on filter and cooler
Air Cleaner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . dual-stage dry type with safety element and evacuator valve
Cooling
Fan Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . suction type, 1:1 speed ratio
Engine Coolant Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –34 deg. F (–37 deg. C)
Powertrain
Mechanical-front-wheel drive, standard differential; electric on/off control
Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-speed, helical-cut gears, full PowerShiftTM with hydraulic reverser standard; electric clutch cutoff on gearshift and loader levers
Shift Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . electric forward-neutral-reverse control lever with neutral start interlock
Torque Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . single stage, dual phase with 2.63:1 stall ratio; 11-in. (280 mm) diameter
PowerShift Standard Transmission
Travel Speeds (measured with 16.9-24, 8 PR R4 rear
and 12-16.5, 8 PR NHS front tires)
Standard Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . Forward (maximum)
Reverse (maximum)
Gear 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5 mph (5.6 km/h)
4.3 mph (7.0 km/h)
Gear 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.3 mph (10.2 km/h)
8.0 mph (12.9 km/h)
Gear 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.0 mph (20.9 km/h)
8.0 mph (12.9 km/h)
Gear 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.6 mph (34.8 km/h)
8.0 mph (12.9 km/h)
Reverse (maximum)
Optional Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . Forward (maximum)
Gear 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5 mph (5.6 km/h)
4.3 mph (7.0 km/h)
Gear 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.3 mph (10.2 km/h)
8.0 mph (12.9 km/h)
Gear 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.0 mph (20.9 km/h)
8.0 mph (12.9 km/h)
Gear 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.7 mph (34.9 km/h)
8.0 mph (12.9 km/h)
Axles
Axle Oscillations, Stop to Stop . . . . . . . . . . . . . . . . . . . . . 22 deg.
Differentials
Front, Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . open
Rear, Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . electric actuated hydraulic locking with foot switch
Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . hydrostatic power steering (SAE J1151) and emergency steering (ISO5010); electric forward-neutral-reverse control lever with neutral start interlock; mechanicalfront-wheel-drive axle
With Brakes
Without Brakes
Curb-Turning Radius . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 ft. 11 in. (33.3 m)
13 ft. 8 in. (41.7 m)
Bucket Clearance Circle . . . . . . . . . . . . . . . . . . . . . . . . . . 29 ft. 9 in. (90.7 m)
35 ft. 3 in. (107.4 m)
Steering Wheel Turns, Lock to Lock . . . . . . . . . . . . . . . . . 3.3
Final Drive, Mechanical Front Wheel and Rear Axle . . . . . . heavy-duty, outboard planetary final drives distribute shock loads over 3 gears
Brakes (conform to SAE J1473)
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . power assisted, hydraulic wet disc, mounted inboard, self-adjusting and self-equalizing
Parking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . spring-applied, hydraulically released, wet, multi disc, independent of service brakes with electric switch control
Hydraulics
Main Pump (loader and steering) . . . . . . . . . . . . . . . . . . . . . . . open center, gear type with integral priority valve
Rated rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,200
Pump Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 gpm (95 L/m)
System Relief Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,750 psi (18 961 kPa)
Hydraulic Cycle Time
Raise Time to Full Height . . . . . . . . . . . . . . . . . . . . . . . . . 5.2 sec.
Bucket Dump Time at Maximum Height. . . . . . . . . . . . . . 1.5 sec.
Bucket Lowering Time (power down) . . . . . . . . . . . . . . . . 2.4 sec.
Loader Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . single-lever control with electric clutch cutoff switch
Cylinders
Heat-treated, chrome-plated, polished rods; hardened-steel (replaceable bushings) pivot pins
Bore
Loader Boom (2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.15 in. (80 mm)
Loader Bucket (1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.54 in. (90 mm)
Steering (1) MFWD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.64 in. (67 mm)
3-Point Hitch
Lift (1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.00 in. (76 mm)
Pitch (1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.50 in. (64 mm)
Tilt (1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.00 in. (76 mm)
Rod Diameter
1.97 in. (50 mm)
1.97 in. (50 mm)
1.65 in. (42 mm)
Stroke
31.1 in. (790 mm)
29.3 in. (744 mm)
8.27 in. (210 mm)
2.00 in. (51 mm)
1.25 in. (32 mm)
2.00 in. (51 mm)
8.00 in. (203 mm)
8.50 in. (216 mm)
4.75 in. (121 mm)
PAGES
10–11
DKA210LE_SPECS
7/31/07
Loader
2:06 PM
Page 11
210LE
Bucket Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0–1.25 cu. yd. (0.76–0.86 m3)
Category II 3-Point Hitch
Heavy-duty, integral to vehicle mainframe, with individual lever control of the lift, tilt, pitch, and auxiliary functions, and with down force and float on the lift circuit
Static Lift
At Lower Link, Ends Horizontal. . . . . . . . . . . . . . . . . . . . . 6,870 lbf (30.5 kN)
24 in. (610 mm) Behind Lift Points. . . . . . . . . . . . . . . . . . 3,790 lbf (16.8 kN)
Controlled Hydraulic Flow Rate, Maximum . . . . . . . . . . . . . . . . 10 gpm (38 L/m)
Electrical
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 volt
Battery Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 925 CCA
Reserve Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180 min.
Alternator Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 amp
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 halogen front driving/working (32,500 candlepower each); 2 turn signal/flashing lights; 2 rear stop/taillights
Operator Station
Canopy, isolation mounted, ROPS/FOPS with steel roof (SAE J1040)
Tires/Wheels
With MFWD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-16.5, 8 PR NHS front / 16.9-24, 8 PR R4 rear
Serviceability
Refill Capacities
Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2 gal. (16 L)
Rear Axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8 gal. (18 L)
Engine Oil with Vertical Spin-On Filter . . . . . . . . . . . . . . . 14 qt. (13 L)
Torque Converter and Transmission . . . . . . . . . . . . . . . . . 16.9 qt. (16 L)
Fuel Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 gal. (98 L)
Hydraulic System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.4 gal. (55 L)
Mechanical-Front-Wheel-Drive Axle . . . . . . . . . . . . . . . . . . . . . 2 gal. (7.6 L)
Operating Weights
Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9,130 lb. (4141 kg)
Optional Components
Hitch/Drawbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 535 lb. (243 kg)
Box Blade
88-in. Deere brand. . . . . . . . . . . . . . . . . . . . . . . . . . 1,650 lb. (748 kg)
84-in. Deere brand. . . . . . . . . . . . . . . . . . . . . . . . . . 1,620 lb. (735 kg)
Wheel Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,100 lb. (499 kg)
Buckets
1.0 cu. yd. (0.76 m3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 740 lb. (336 kg)
1.12 cu. yd. (0.86 m3) . . . . . . . . . . . . . . . . . . . . . . . . . . . 940 lb. (426 kg)
1.25 cu. yd. (0.96 m3) multipurpose . . . . . . . . . . . . . . . . . 1,640 lb. (744 kg)
Tractor Loader Dimensions (with 7.5-cu.-ft. [0.21 m3] buckets)
A Height to Bucket Hinge Pin
anical-
At 45-deg. Dump Angle . . . . . . . . . . . . . . . . . . . . . . 11 ft. 2 in. (3.40 m)
At Full Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 ft. 5 in. (3.47 m)
B At 45-deg. Dump Angle . . . . . . . . . . . . . . . . . . . . . . . . . 8 ft. 4 in. (2.55 m)
At Full Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 ft. 10 in. (2.68 m)
C Rollback Angle At Ground Level (bucket pin 11 in.
[280 mm] off ground). . . . . . . . . . . . . . . . . . . . . . . . . . . 44 deg.
D At Full Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41.6 deg.
E At 45-deg. Dump Angle . . . . . . . . . . . . . . . . . . . . . . . . . 3 ft. 1 in. (0.94 m)
At Full Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 in. (0.87 m)
F Lower Link Horizontal . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ft. 9 in. (1.14 m)
G Bucket Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.6 in. (0.24 mm)
H Bucket Level On Ground . . . . . . . . . . . . . . . . . . . . . . . . 6 ft. 6 in. (1.98 m)
Bucket Rolled Back, Pin 11 in. (280 mm) Off Ground. . . . 6 ft. 5 in. (1.95 m)
I Wheelbase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 ft. 11 in. (2.12 m)
J Transport Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 ft. 2 in. (2.48 m)
K Bucket Level On Ground . . . . . . . . . . . . . . . . . . . . . . . . 17 ft. 2 in. (5.23 m)
L Lower Link Pin Center . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6 in. (40.64 mm)
M Static Loaded Radius . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 in. (584 mm)
N Ground Clearance
Under MFWD Axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.3 in. (287 mm)
Under Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.3 in. (0.31 m)
Width Over Rear Tires . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ft. 1 in. (2.15 m)
with 1.00-cu. yd. (0.76 m3)
Heavy-Duty Long Lip Bucket
Capacity, Heaped SAE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.00 cu. yd. (0.76 m3)
Breakout Force (SAE J732C) . . . . . . . . . . . . . . . . . . . . . . . . . . 7,900 lbf (35.14 kN)
Bucket Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 710 lb. (322 kg)
Bucket Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ft. 2 in. (21.8 m)
Reach at Full Height, Bucket at 41.6 deg. . . . . . . . . . . . . . . . . 34.4 in. (8.7 m)
Dump Clearance, 45-deg. Dump . . . . . . . . . . . . . . . . . . . . . . . 8 ft. 5 in. (25.6 m)
Lift Capacity at Full Height. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5,280 lb. (2395 kg)
Digging Depth Below Ground, Bucket Level . . . . . . . . . . . . . . . 9.6 in. (244 mm)
3-Point Hitch Dimensions
a Height of Hole for Top Link. . . . . . . . . . . . . . . . . . . . . . . 30.8 in. (7.8 m)
b Height of Rear Axle Center . . . . . . . . . . . . . . . . . . . . . . . 23.0 in. (5.8 m)
c Top Link Hole Distance from Rear Axle Center . . . . . . . . 17.7 in. (4.5 m)
d Height of Lower Link Point . . . . . . . . . . . . . . . . . . . . . . . 18.3 in. (4.6 m)
e Lower Link Point Distance from Rear Axle Center . . . . . 14.0 in. (356 mm)
f Pitch Cylinder (top link)
Retracted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.5 in. (5.7 m)
Extended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.0 in. (7.9 m)
D
E
A
J
B
C
M
N
I
H
G
L
F
K
c
f
with 1.12-cu. yd. (0.86 m3)
Heavy-Duty Long Lip Bucket
1.12 cu. yd. (0.86 m3)
7,750 lbf (34.47 kN)
940 lb. (426 kg)
7 ft. 2 in. (21.8 m)
33.8 in. (8.6 m)
8 ft. 4 in. (25.5 m)
5,100 lb. (2313 kg)
10.2 in. (259 mm)
with 1.25-cu. yd. (0.96 m3)
Multipurpose Bucket
1.12 cu. yd. (0.86 m3)
6,900 lbf (30.69 kN)
1,450 lb. (658 kg)
a
7 ft. 2 in. (21.8 m)
35.4 in. (9.0 m)
8 ft. 1 in. (24.5 m)
4,600 lb. (2087 kg)
11.8 in. (300 mm)
b
h
d
j
g
e
k
g
h
i
j
k
Lower Link Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.5 in. (7.5 m)
Maximum Height of Lower Link . . . . . . . . . . . . . . . . . . . 28.1 in. (7.1 m)
Minimum Height of Lower Link . . . . . . . . . . . . . . . . . . . 7.7 in. (196 mm)
Height of Drawbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.8 in. (325 mm)
Hitch Pin from Rear Axle Center . . . . . . . . . . . . . . . . . . . 33.2 in. (8.4 m)
i
DKA210LE_SPECS
7/31/07
2:06 PM
Page 12
210LE LANDSCAPE LOADER
Key:
● Standard equipment ▲ Optional or special equipment
210LE Engine
● Certified to EPA Tier 2 emissions
● John Deere 4045D 4.5 liter, 72 hp naturally
aspirated, isolation mounted
▲ John Deere 4045T 4.5 liter, 80 hp turbocharged,
isolation mounted
● Diagnostic capabilities with Tier 2 engine
● Vertical spin-on engine oil filter
● Coolant recovery tank
● Serpentine belt with automatic belt tensioner
● Enclosed safety fan guard
● Muffler, underhood with curved-end exhaust stack
▲ Muffler, spark arrested, underhood with curvedend exhaust stack
▲ Electric ether starting aid
▲ Engine coolant heater, 1,000 watts
Powertrain
● PowerShift transmission: Torque converter with
electrically actuated twist grip F-N-R in 1–4 gears
Transmission oil cooler
Vertical spin-on transmission filter
Differential lock, electric foot actuated
Hydraulic service brakes (conform to SAE J1473)
Parking brake (conforms to SAE J1473)
Mechanical-front-wheel-drive, standard differential, sealed axle
▲ Mechanical-front-wheel-drive, limited slip,
sealed axle
▲ Transmission guard
▲ Rear wheel spacers for use with chains
●
●
●
●
●
●
Category II 3-Point Hitch
● Integral Category II
● 4-function sectional hydraulic valve, 4th-function
auxiliary with capped hoses
▲ 5th-function auxiliary valve with control lever
▲ 2nd tilt cylinder
Loader
● Hydraulic self leveling
● Return-to-dig feature
● Bucket-level indicator
● Single-lever control with electric clutch cutoff
switch
See your John Deere dealer for further information.
210LE Loader (continued)
● Loader boom service lock
▲ 3rd-function valve and lever for auxiliary
equipment
●
●
●
●
●
●
●
▲
●
●
●
●
●
●
●
●
▲
Hydraulic System
25 gpm (95 L/min.)
Independent hydraulic reservoir
Hydraulic oil cooler
“O”-ring face seal connectors
10-micron vertical spin-on filter
Electrical
12 volt, 65 amp
Single battery, 180-min. reserve
Dual batteries, 360-min. reserve
Positive terminal battery cover
Blade-type multi-fused circuits
By-pass start safety cover on starter
Cab prewired for rotating beacon
Loader Buckets
● Less bucket, with bucket pins
▲ Heavy-duty bucket with cutting edge, and skid
plates
Lights
Front halogen driving/work lights (2)
Combination turn signal/flashing lights (2)
Rear stop/taillights (2)
Rear reflectors (2)
Deluxe electrical package: rear work lights (2),
light guards for front and signal lights, 12-volt
outlets (2), and battery disconnect switch
▲ Rotating beacon
Operator’s Station
● 2-post ROPS/FOPS canopy with steel roof
(conforms to SAE J1040)
▲ Operator enclosure
● Left front access
● Slip-resistant steps and ergonomically located
handholds
● Built-in Operator’s Manual storage compart●
●
▲
●
●
210LE Operator’s Station (continued)
● Hour meter
● Audible and visual indicators: Engine coolant
temperature / Engine oil pressure / Stop indicator
● Visual indicators: Alternator low voltage / Engine
air filter restriction / Hydraulic oil filter restriction / Park brake on/off / Seat belt reminder /
Transmission oil temperature / Beacon indicator
● Fuel-level gauge
● Suspension vinyl seat with flip-up armrests,
backrest angle adjustment, swivel base, 3-in.
retractable seat belt
▲ Non-suspension vinyl seat without armrests,
with 3-in. retractable seat belt
ment with manual
Interior rearview mirror
Foot throttle
Hand throttle
Horn
Key start switch with electric fuel shutoff
▲ Multipurpose bucket with cutting edge and skid
plates
Box Blade
▲ 84-in. heavy-duty with hydraulically actuated
ripper bar and replaceable router blades
▲ 88-in. heavy-duty with hydraulically actuated
ripper bar and replaceable router blades
Overall Vehicle
● One-piece unitized construction mainframe
● Vehicle tiedowns, front (2) and rear (2)
● Vandal protection for instrument panel, access
●
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
doors, fuel tank, and hydraulic reservoir
Reverse warning alarm
3-point hitch counterweight
Wheel weights
Hydrostatic PTO, 540 rpm
3-point hitch weight box
Drawbar, fixed single position
Box scraper
SMV emblem
Brush guards
Fender extensions
JDLinkTM
CONTROL OWNING AND OPERATING COSTS
Customer Personal Service (CPS) is part of John Deere’s proactive, fix-before-fail strategy
on machine maintenance that will help control costs, increase profits, and reduce stress.
Included in this comprehensive lineup of ongoing programs and services are:
Fluid analysis program—tells you what’s going on inside all of your machine’s major
components so you’ll know if there’s a problem before you see a decline in performance.
Fluid analysis is included in most extended coverage and preventive-maintenance agreements.
Component life-cycle data—gives you vital information on the projected life span of
components and lets you make informed decisions on machine maintenance by telling you
approximately how many hours of use you can expect from an engine, transmission, or hydraulic
pump. This information can be used to preempt catastrophic downtime by servicing major
components at about 80 percent of their life cycle.
Preventive Maintenance (PM) agreements—give you a fixed cost for maintaining
a machine for a given period of time. They also help you avoid downtime by ensuring that
Net engine power is with standard equipment including air
cleaner, exhaust system, alternator, and cooling fan at test
conditions specified per ISO9249 No derating is required up
to 5,000-ft. (1500 m) altitude.
07-12-07
critical maintenance work gets done right and on schedule. On-site preventive maintenance service performed where and when you need it helps protect you from the expense
of catastrophic failures and lets you avoid waste-disposal hassles.
Extended coverage—gives you a fixed cost for machine repairs for a given period of
time so you can effectively manage costs. Whether you work in a severe-service setting or
just want to spread the risk of doing business, this is a great way to custom-fit coverage
for your operation. And an extended coverage contract also travels well because it’s backed
by John Deere and is honored by all Deere construction dealers.
Customer Support Advisors (CSAs)—Deere believes the CSA program lends a personal
quality to Customer Personal Service (CPS). Certified CSAs have the knowledge and skills
for helping make important decisions on machine maintenance and repair. Their mission is
to help you implement a plan that’s right for your business and take the burden of machine
maintenance off your shoulders.
Specifications and design subject to change without notice. Wherever applicable, specifications are in accordance with SAE
and/or ISO standards. Except where otherwise noted, these specifications are based on a unit with 16.9-24, 8 PR R4 rear tires;
12-16.5, 8 PR NHS front tires; 1.00-cu. yd. (0.76 m3) loader bucket; full fuel tank; and 175-lb. (79 kg) operator.