EXPANSION JOINT CLEANING NOW
MADE EASIER AND MORE PRECISE
The ideal saw for indoor cutting, expansion joint cleaning, crack control and other concrete
surface preparation work. The GC25EUP has all the features of the GC25E, but carries a
smooth running 2.5HP up-cut electric motor. Its vacuum port on the blade guard ensures
debris is pulled out of the cut and into a collection system. Light-weight and compact, the
GC25EUP is the perfect saw for any concrete surface or decorative contractor need.
GC25EUP EARLY ENTRY/
GREEN SMALL PUSH SAWS
TECHNICAL SPECIFICATIONS
FEATURES
PRODUCT NUMBER GC25EUP
701846 42445 5
Blade Guard Capacity – in (mm)
Maximum Depth of Cut – in (mm)
Arbor Size – in (mm)
Blade Flange Diameter – in (mm)
Blade Shaft RPM
Blade Shaft Diameter – in (mm)
Blade Shaft Bearings
Blade Shaft Drive
Blade Guard Attachment
Blade Control
Axle – Front – in (mm)
Axle – Rear – in (mm)
Wheels – Front – in (mm) D x W x B
Wheels – Rear – in (mm) D x W x B
Handle Bars/Adjustment Length – in (mm)
Control
Chassis
10" (254)
3-3/4" (95)
5/8" (15.9)
3-5/64" (78)
3,000
7/8" (20)
Sealed Radial Bearings
1 Cogged
All Steel
Screw Feed
55/64" (22)
55/64" (22)
3-3/8"x2-3/4"x25/32" (85x70x20)
3-3/8"x2-3/4"x25/32" (85x70x20)
6" (152.4)
Push
Heavy Duty Stamped Steel
with Reinforcements
115/330 volt
Electric
T.E.F.C. Thermal Protection
3 HP
3 HP
115-230 Volts
60Hz/AC/1
19.5/9.73 Amps
91/46 Amps
-NA-NA-NA-NA-NA-NA-NACapacitor
Forced Air
Power Source
Motor/Engine Type
Specifications
Maximum Horsepower*
Net Horse Power*
Voltage
Cycle*/Current/Phase
Full Load Amps*
Starting Amps*
Displacement – cu In (l)
Bore – in (mm)
Stroke – in (mm)
Cylinders/Cycle
Fuel Capacity – gal (l)
Oil Capacity – qt (l)
Air Filter
Starter
Engine Cooling
Saw Dimensions
Height – in (mm)
Minimum Saw Length (Transport) – in (mm)
Maximum Saw Length (Working) – in (mm)
Maximum Pointer Length – in (mm)
Frame Width – in (mm)
Saw Width – in (mm)
Front (Outside to Outside Wheel Width) – in (mm)
Rear (Outside to Outside Wheel Width) – in (mm)
Blade to Wall – in (mm)
Wheel Base Length – in (mm)
Weight Crated – lbs (kg)
Weight Uncrated – lbs (kg)
24-7/32" (615)
32" (813)
42-29/32" (1090)
8-7/32" (209)
13-11/16" (348)
18-1/8" (460)
8-21/32" (220)
13" (330)
7-1/2" (190)
19" (483)
155 (70.3)
Compact Frame Design
Vacuum Port
Improved Wheel Design
Fold-Down Design
RECOMMENDED DIAMOND BLADES
– DRY CUTTING
UPC
SIZE / DESCRIPTION
701846 81513 0
701846 81512 3
701846 45138 3
701846 81780 6
701846 44208 4
8 x .090 x DM-7/8-5/8 Charger Segmented Rim
8 x .090 x DM-7/8-5/8 Charger Turbo Rim
8 x .125 x DM-7/8-5/8 Charger Segmented Rim
8 x .250 x 7/8-5/8-20mm Norton Classic Tuck Pointing
8 x .375 x 7/8-5/8-20mm Charger Segmented V-Shaped Crack Chasing
Segmented
Turbo Rim
Tuck Point
V-Shape
135 (61.2)
*= DATA PROVIDED BY MOTOR/ENGINE MANUFACTURER
www.facebook.com/NortonConstruction | www.youtube.com/NortonConstruction | www.nortonconstructionproducts.com
USA CUSTOMER SERVICE:
Toll Free Phone: 1 (800) 554-8003
Toll Free Fax: 1 (800) 443-1092
CANADA CUSTOMER SERVICE:
Toll Free Phone: 1 (800) 263-6565
Toll Free Fax: 1 (800) 561-9490
FORM #8326 REV. 03/15
© Saint‑Gobain March 2015.
Norton is a registered trademark; Charger, Classic, and All The Muscle You Need
are trademarks of Saint‑Gobain.
PRIMARY
SPONSOR