Irresistible
Deposit-Only Colors
Formulation
Step 1: Determine level of hair using the Natural Color Series.
Check entire length of hair.
Application
Step 2: Select Irresistible Color based on level and tone desired.
Resistant Hair: Apply to entire head. Cover with plastic cap and
process under dryer up to 15 minutes, followed by a 5 minute
cool-down at room temperature.
Normal Hair: Apply to entire head. Process at room temperature
for 20 minutes.
Mixing
Mix equal parts of Irresistible Color and Irresistible Processor in a
plastic applicator bottle. Mix well. Irresistible Clear may be added
if a lighter shade is desired. Irresistible Processor is recommended
for processing Irresistible Color to ensure consistent results.
Used as a Refresher: Apply color to new growth only and process.
Pull through ends as needed.
Finish: Rinse thoroughly with tepid water. Shampoo with Tressa
Replenishing Shampoo.
NOTE: Chemically treated hair may receive color quicker than non-treated hair. Always strand test to determine proper timing.
Natural
2N
4N
5N
6N
7N
8N
9N
Natural
Ash
COOL
Filler Guide*
4A
5A
6A
8A
9A
Violet
NATURAL
Irresistible Deposit-Only Colors — The Easiest Color You’ll Ever Use!
Gold
6G
7G
8G
9G
4RB
6CG
1
5R
2
5R
3
5R
4
5R
5
6RO
6
6RO
7
9CR
8
9CR
9
10
9CR
9CR
If Overly
Porous, Add
1/8 oz. Red
1/8 oz. Red
1/8 oz. Red
1/8 oz. Red
1/8 oz. Red
1/8 oz. Yellow
1/8 oz. Yellow
1/8 oz. Yellow
1/8 oz. Yellow
NA
Selecting Filler Formula: Determine the level
to which you are filling. Refer to the chart above.
Mixing: 1oz. Color + 1oz. Processor
Application: Apply to damp hair on all areas
requiring a filler. Towel off filler or rinse. Apply
desired level from scalp to ends.
Timing: Strand test filler every 5 to 20 minutes.
6NR
4RO
Underlying
Natural
Pigment
8CG
9CR
6RO
Red Violet
5R
4P
Cool
Warm
Natural
Red
9CR
10 Pale
9V
9A
9G
+ Clear
Yellow–Yellow
9V
9A
9G
9CR
9Yellow–
+ Clear + Clear + Clear + Clear
Orange
8Orange–
9V
9A
9G
9CR
Yellow
9N
6RO
8A
8G
7Orange
+ Clear
+ Clear
6N
6A
6G
6RO
6Red–
+ Clear + 8A + 8G + Clear
Orange
6N
6A
6G
6RO
5Red
4G
5N
5A
5R + Clear
4Red
+ 6G
4N
4A
4G 5R + Clear
3Red–Brown
Selecting Filler Formula: Determine Residual
Contributing Pigment at the level you wish to tone.
Refer to the chart above.
5RV
Slate
Mixing: 1oz. Color + 1oz. Processor
Slate
Application: Apply to damp hair from scalp
to ends.
Blue Base – Use on Levels 1- 6
Timing: Strand test toner every 5 to 20 minutes.
Silver
*Refer to the Color Resource Guide for more
Corrective Color information.
Silver
Clear
SPECIALTY
Filler
Choice
Toning Guide*
Red
REDS
4G
Red Orange Copper Red Copper Gold Red Brown
WARM
9V
Return
to Level
Clear
Color Support Products
Violet Base – Use on Levels 7-10
Clear may be added to lessen or lighten color result. The more Clear
added, the lighter and less intense the color. Clear may also be used
just for added shine (mix 1 part Clear to 1 part Irresistible Processor).
Colourage Gel Color Concentrates: Available in Red, Yellow,
Blue and Violet. May be mixed with any Irresistible Shade.
Follow Us!
tressa.com
Color Stain Remover: Removes color stains from
skin, clothing and hard surfaces
PEQ Porosity Equalizer: Balances porosity so color
is vibrant and longer lasting with less fading
Protage: Protects client’s skin and your hands from
irritating chemicals
Watercolors Shampoos: See back for more info
100% MADE IN THE USA Questions? 1.800.TRY.TRESSA or [email protected] ©2013 Tressa, Inc.