Get to know your MYZONE belt.
How to correctly wear your MYZONE Physical Activity Belt.
Adjust your MYZONE Physical Activity Belt so that it fits comfortably across the bottom of your chest
with the MYZONE logo in the center. You can adjust the strap size using the plastic adjuster. The
MYZONE belt should be firm or tight around your body, ensure it is comfortable.

Belt Tip

1. Wet the rubber sensors when you fit your belt to
improve connection sensitivity.



2. Ensure the rubber sensors remain in contact with
your skin/body throughout your workout to avoid
interruption in data.
The MYZONE Receiver
The MYZONE receiver allows the data to be transmitted from the belt
to the software and then into your MYZONE online account. While
working out in the gym the receiver will transmit the data in real time
and be displayed on the screen. For workouts away from the club
your stored data is uploaded within 10 feet of the receiver.
Live Display
1.
2.
When you’re at the club your belt will display on the screen showing
your effort, calorie burn and MEPS.
1. Nickname
2. Calories Burned (Kcal)
3. Current Heart Rate (BPM)
4. MEPs Earned
5. Effort Level (% of Max)
5.
3.
4.
Tips for live display
1. Ensure you are wearing the belt correctly and have moistened the rubber sensors.
2. The signal between the belt and receiver is strongest when there is a clear line of sight allowing the
data to be transmitted wirelessly.
This may be interrupted due to:
• Having your back to the receiver.
• Laying on your front or in a pushup position.
• The rubber sensors not staying in contact with the skin.
• Moving out of range of the reciever.
Recording Exercise Data
When you exercise away from the club your belt will record up to 16
hours of data. The belt memory is cleared on completion of upload
at your club.
Fit your belt and listen out for the beeps when recording data
1 Beep - Belt is connected.
3 Beeps - Your belt is now
recording.
1 Beep - Recording stopped
due to removing belt or moving in
range of reciever.
Tips for storing data
1. Ensure you are wearing the belt correctly and have moistened the rubber sensors.
2. Listen out for the beeps.
3. Disconnect your belt when not in use and store in a dry place.
Uploading Stored Data
If you have exercise data recorded on your belt you must complete
an upload to ensure you get credit in your MYZONE online account.
Step 1:
On Screen Indicators
Stand within 10 feet of a MYZONE Console.
Step 2:
Either wear your belt or
while connected hold your
thumbs over the rubber
sensors.
Step 3:
Upload in Progress.
Listen for the beeps.
Tip: P
lease stay within range while data is
uploading.
(1 Beep)
Successful Upload.
Tip: C
heck your online account to view
your workout data.
Belt is connected.
Waiting to Reconnect.
(4 Beeps)
Tip: U
pload incomplete but will try again
with 4 beeps as per step 3.
Attempting to upload.
(2 Beeps)
Successful upload.
(1 Long Beep)
pload incomplete but will try again with 4
U
beeps as above.
Tips
• If more than one person is attempting to upload,
each belt will upload in turn.
• The more data stored on your belt the longer
the upload time.
myzonemoves.com