Large Square Top Removal (LST/LSTC) Filter
■■ Topside bag replacement speeds
changeout of filter media
■■ Hinged top doors allow clean air
access to filter media
■■ Can be fitted with either bags or
pleated cartridges, depending on
efficiency requirements
■■ Part of the ProPulse® portfolio of
industrial air filtration products
Application
The LST filter has a square housing and hinged top doors in
the clean air plenum for easy access to the tubesheet and
filter media.
The same filter housing can be fitted with pleated
cartridges for higher filtration efficiencies, and
is then designated as LSTC. LSTC models can
handle higher air volumes than the LST model.
This square bodied pulse jet cleaned filter unit is designed to
handle medium to high air volumes. Typically used as a nuisance dust collector in applications where floor space is limited. As filter media is removed vertically from the top clean
section, the LST filter is also suitable for hazardous dusts.
Standard Specifications
■■ Unit stressed for 17” W.C. and 200º F standard
temperature
Equipment
Designed for large air capacities, the Mac Process LST has
top side bag replacement and an optional walk-in clean air
plenum. Hinged top doors open to the clean-air plenum and
allow easy access to the tubesheet and filter media.
Mac Process offers this filter in two styles: without the hopper
(Style II) the filter is ideally suited as a bin vent filter for storage tanks, work bins and surge hoppers.
With a 60° hopper (Style III) the filter receives dust through
the hopper inlet and discharges the collected dust through an
airlock for dust disposal or recycling.
BV-D5116GB
■■ Carbon steel construction:
■■ Clean air plenum: 7 ga.
■■ Baghouse and hopper: Reinforced 10 ga.
■■ Full welded exterior except reinforcing and skip
welded interior
■■ Broke lip flange between baghouse and hopper
■■ LST64 - LST100 and 96LST144, 120LST144,
96LST196 and 120LST196: 1/4” x 3” flat bar
■■ 144LST144 and 144LST196: 1/4” x 4” flat bar
■■ 64 and 81: 1” purge pipes
■■ 100, 144 and 196: 1 1/2” purge pipes
B
Mac Process
7901 NW 107th Terrace
Kansas City, MO 64153
888-657-3098
E-mail: [email protected]
Web site: www.macprocessinc.com
Model
Cloth Number
Area of Bags
SCFM
Cleaning
Air
A
(inches)
96LST64
803
120LST64
1007
10
81 3/8
144LST64
1211
96LST81
1016
120LST81
1274
144LST81
1533
318 1/16
96LST100
1255
277 7/16
120LST00
1574
144LST00
1893
96LST144
1807
120LST144
2266
144LST144
2725
340 1/8
96LST196
2459
306 7/8
120LST196
3085
144LST196
3710
B
(inches)
262 11/16
64
286 11/16
310 11/16
270 1/16
81
100
10
21
89 7/8
98 3/8
294 1/16
301 7/16
325 7/16
292 1/8
144
196
42
42
115 3/8
132 3/8
316 1/8
330 7/8
354 7/8
BV-D5116GB 1130.1 All information is given without obligation. All specifications are subject to change. © by Schenck Process, 2013
A