Catalog Number:
Date:
Project:
OVERVIEW
The Chelsea DigitalSwitch is a 100% digital switch that may be programmed to control any relay, dimmer
or panel. Connected to any GR 2400 system via Cat. 5 patch cable with RJ45 connectors, Chelsea
DigitalSwitches can be mounted in any standard 2.25" deep switch box with a decorator style switch plate.
Chelsea DigitalSwitches can be ordered with 1, 2, 3, 4 or 6 buttons per gang with custom engraved buttons
at no cost. Switches can be ordered preprogrammed or may be programmed in the field using the DTC
(Digital Time Clock). All Chelsea DigitalSwitches are 100% backwards compatible with all LC&D systems.
GR 2400™
FEATURES
•
•
•
•
•
•
•
•
•
•
•
Custom button engraving (2 lines 8 character/line)
Pilot light to illuminate all push buttons
Waterproof option
Ability to be linked to up to 127 digital addresses via Cat. 5 patch cable with RJ45 connectors
Enable/disable by optional KeyEnable switch
A green “Locator Light” at the top of each unit which is always on and can be programmed to blink to
show “Horn Driver Mode” or help locate a switch in the dark
Programmable Status LED logic
Adjustable debounce time to avoid accidental triggers
Audible beep alert for warning or switch locating
Alternate button programming to allow more flexibility of use including using one button to perform
different tasks at different times of the day
Ability to be digitally enabled/disabled over the bus on a per button or per switch basis
Chelsea
Warranty
Three-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
Specifications subject to change without notice.
ORDERING INFORMATION
CHELSEA DIGITALSWITCH
Number of Buttons
Example: CH3 WP MC 1BRD 2BBK PIV
Waterproof
Button Color(s)
Plate Colors
CH1
1 button Chelsea
[blank]
Not waterproof
Single color
Multicolor
PWH
White plate
CH2
2 button Chelsea
WP
Waterproof
BWH
All buttons white
MC
PAL
Almond plate
CH3
3 button Chelsea
BAL
All buttons almond
PIV
Ivory plate
CH4
4 button Chelsea
BIV
All buttons ivory
Color (specify for MC only)
PST
Stainless steel plate
CH6
6 button Chelsea
BGY
All buttons gray
_BWH <# of buttons> white
PBK
Black plate
BBK
All buttons black
_BAL
<# of buttons> almond
BRD
All buttons red
_BIV
<# of buttons> ivory
BGR
All buttons green
_BGY
<# of buttons> gray
BBU
All buttons blue
_BBK
<# of buttons> black
BUL
All buttons yellow
_BRD
<# of buttons> red
BOR
All buttons orange
_BGR
<# of buttons> green
_BU
<# of buttons> blue
_BYL
<# of buttons> yellow
_BOR
<# of buttons> orange
Multicolored buttons
See more order examples next page.
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.com
© 2014-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 01/30/17
GR2400_CHELSEA
1 of 2
SINGLE COLOR EXAMPLES:
MULTICOLOR EXAMPLES:
CH6 BWH PWH
Six button Chelsea with six white buttons and a white faceplate
CH6 MC 2BWH 4BBK PST
Six button Chelsea with two white and four black buttons and a stainless
steel faceplate
CH4 WP BRD PBK
Four button Chelsea, waterproof, with four red buttons
and a black faceplate
CH4 MC 2BBU 1BGR 1BYL PWH
Four button Chelsea with two blue, one green, and one yellow button
and a white faceplate
Button quantity represents the number of buttons on a switch that will be in the selected color—number may not exceed total number of buttons on switch — total of all button
color quantities must equal total number of buttons on switch (refer to examples).
SPECIFICATIONS
Switch dimensions:
Switch plate:
Mounting:
Addresses available:
Address per switch:
Function:
1.3" w x 4" h x 1.3" d
Decorator style
2.25" deep-switch box
(Waterproof bell box - Waterproof option only)
1–119
(1)
ON, OFF, Mixed, Group Control, Toggle, Scene
Control
Power supply inputs: Powered from GR 2400 bus
Programming: Via DTC or with GX2 lighting control software
Max. humidity: 10–90% non-condensing (100% rain proof Waterproof option only)
Ambient temperature: 32–104° F (0–40° C)
Bus connector: Two RJ45 connectors
Bus termination: Manual end-of-line termination with jumper
OVERVIEW
Chelsea DigitalSwitches are available in 1, 2, 3, 4 or 6 buttons. Center plates are available in white, ivory, almond, black, and brushed stainless steel. Indicator light is red and
locator light is green.
Available Plate Colors
Waterproof Chelsea DigitalSwitch™
White
Almond
Stainless Steel
Ivory
Black
Available Button Colors
Note: Sealed Switch is provided with a 10ft standard Cat. 5
connection cable and may be cut to a more convenient length.
Acuity Brands does not provide the cover plate. Cover plate is
provided by contractor.
White
Red
Almond
Ivory
Gray
Black
Green
Blue
Yellow
Orange
Title 24 System Component
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.com
© 2014-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 01/30/17
GR2400_CHELSEA
2 of 2