FU R U K AWA FTTx S O L U TI ON
Furukawa Offers FTTx Products
for Global Markets
Furukawa Electric has a rich tradition of designing and delivering exceptional,
first-to-market optical products and solutions for a wide variety of industries and applications.
Today we offer one of the world’s leading FTTx product portfolios,
including optical fiber, cable, closure, cabinet, connectivity, tools and related solutions.
Underground Closure
Aerial Closure
J396L3
J363
P.33
J380EX
P.34
P.35
J397
P.36
Splitter
Drop Cable
PS202
ONU
P.50
Drop Cable
Single Family Unit
Application P.5
FTTx Solution
Underground cable
Aerial cable
Underground closure
Aerial closure
1
P.24
Underground Cable
Central Office
OLT
Loose Tube Cable
Multi Dwelling
Unit (Office) Application P.3
P.15
S-Slotted Core Cable P.17
SZ-Slotted Core Cable P.18
Aerial Cable
Loose Tube Cable
P.16
ADSS Cable
P.16
SZ-Slotted Core Cable P.19
Rollable Ribbon Cable P.21
C o n t e n t s
FTTx Network Solution…………………………………………
Highlighted Technology…………………………………………
Optical Fiber………………………………………………………
Optical Fiber Cable………………………………………………
Closure, Cabinet and Splitter……………………………………
•Closure…………………………………………………………
•Cabinet…………………………………………………………
•Splitter…………………………………………………………
Optical Connector and Tools……………………………………
Tools (Fusion Splicer / Optical Identifier)………………………
1
7
9
13
31
33
37
50
51
59
2
Multi Dwelling Unit (Office) Application
V-Linx Spool and Play Solution
V-Linx Spool & Play Solution provides fast and easy plug and play installation.
Easy plug and play solution provides starting the service quickly and service recovery immediately.
V-Linx Spool and Play Solution P.37
EZ-Bend Cable
P.29
Optical Connector Rosette
P.49
(J428N)
Field Installable Connector P.52
Low Friction Indoor Cable
P.28
(1 or 2-fiber)
3
V-Linx Terminal
P.41
V-Linx Combiner
P.40
V-Linx FDH
P.39
Multi Dwelling Unit (Office) Application
Direct Cabling Solution
Direct cabling solution provides flexibility for making network construction upon customer needs in MDU.
Splitter can be placed at any point (Termination box in MDU) and fiber splice and connector connection are
available at any place.
EZ-Bend Cable
P.29
Low Friction Indoor Cable
P.28
(1 or 2-fiber)
Splitter Module
P.46
Termination Box
– E Cabinet-SS
P.44
Optical Connector Rosette
P.49
(J428N)
Field Installable Connector P.52
Low Friction Indoor Cable
P.26
(8-fiber)
Accumax
P.25
Splitter (PS202)
P.50
Termination Box (J422) P.42
4
Single Family Unit Application
Standard Solution
Low friction cable technology provides ease of installation to congested pipe and crown molding.
Aerial Closure (J397) P.36
Splitter (PS202)
Rollable Ribon Cable mini P.22
P.50
1 or 2-fiber Drop Cable P.24
ONU
Splicing Box (J425) P.48
Pipe/
Crown molding
Field Installable Connector P.52
Optical Connector Rosette
P.49
(J428N)
Low Friction Indoor Cable P.28
5
Field Installable Connector P.52
EZ-Bend Cable
P.29
Single Family Unit Application
Stapling Solution
EZ-Bend cable technology provides ease of installation by using the stapling method.
Splicing Box (J425) P.48
Staple
ONU
EZ-Bend Cable
P.29
EZ-Bend cable stapled on board
Optical Connector Rosette
P.49
(J428N)
EZ-Bend Cable
P.29
•35 quarter turns
•10 staples
6
Highlighted Technology
Compact Sized & Light Weight Aerial Cables
– Rollable Ribbon Cable, Rollable Ribbon Cable mini –
(SSW structure cable)
Furukawa Electric newly launched compact sized and light weight aerial cables which compose newly developed Rollable Ribbon fiber. It allows to install high fiber-count aerial cables
under situations where wiring conventional type of cables are limited.
Supporting wire
Joint
Local central office
Rollable Ribbon Cable P.21
Rollable Ribon Cable mini P.22
Cable part
SSW structure cable
Access
Indoor/Premises
Comparison of cable height
Cable height (mm)
Cable height has been reduced by 50%
compared with loose tube cables (figure-8
type, 24-fiber cable). The new cables will
greatly assist easy installation of aerial
cables.
30
25
20
15
10
5
0
0
50
100
150
200
250
Fiber count
Loose Tube
(Figure-8)
Rollable Ribbon Cable
(SSW)
Rollable Ribbon Cable mini
(SSW)
Cable weight has been reduced by 80%
compared with loose tube cables (figure-8
type, 24-fiber cable). The new cables can
be installed under situations where conventional cables can not be installed due
to weight limitation.
Cable weight (kg/km)
Comparison of cable weight
400
350
300
250
200
150
100
50
0
0
100
150
200
250
Fiber count
Loose Tube
(Figure-8)
7
50
Rollable Ribbon Cable
(SSW)
Rollable Ribbon Cable mini
(SSW)
Fiber Ribbon for Easy Separating
– Rollable Ribbon –
Optical fiber ribbon which optical fibers are bonded
in intervals. The fiber ribbon separation is surprisingly easy since it needs only unsticking the bonded
portion. Also, the ribbons can be rolled and the
rolled ribbons can be stranded. This new technology has realized extremely compact sized and light
weight high fiber-count cables.
Rollable Ribbon
(schematic view)
Stacked ribbons
(conventional ribbon)
P.23
Rolled-up ribbons
(rollable ribbon)
Cables for Pushing Installation
– Low Friction Indoor Cable –
Indoor cables which cable sheath has low friction
property based on Furukawa’s original cable sheath
material technology. Friction coefficient of the cable
has been reduced by over 75% *1 and over 30 pieces
of the cable can be installed into a pipe *2. The new
cables will assist to drastically reduce time spent on
cable installation in MDU.
*1) compared with conventional indoor cables
*2)In case of 1-fiber cable. Based on Furukawa’s standard wiring model
Low Friction Indoor Cable
P.26
(8-fiber)
Low Friction Indoor Cable
P.28
(1 or 2-fiber)
Pipe diameter: 22mm (inner)
Pipe length: 20m
Number of pipe bending: 5
Pipe
Pushing installation
Furukawa’s standard wiring model
8
Optical Fiber
Optical Fiber
Furukawa Electric Group designs and manufactures high performance optical fibers offering
superior performance and reliability.
AllWave Zero Water Peak (ZWP) Fiber offers increased transmission capacity by full spectral
bandwidth, and the lowest loss in metro/access applications.
AllWave FLEX ZWP Fiber can transmit full spectrum with low bending loss, and have good reliability for long-term in premise and indoor applications as well as access applications.
AllWave FLEX + ZWP Fiber maintains even lower bending loss at a bending radius of 7.5 mm
keeping its full spectrum feature, and is suitable for premises and indoor applications.
AllWave FLEX Max Fiber offers outstanding bend performance to a 5 mm radius for demanding in-building and connectivity applications.
Application
Central office
Local central office
OLT
ONU
Indoor/Premises
Metro
Product name
9
Access
Features
Intl. standard
Typical applications
Page
AllWave
ZWP Fiber
· Full band spectrum
· Low attenuation loss
G.652. D
AllWave FLEX
ZWP Fiber
· Low loss at 10 mm bend radius
· Full band spectrum
G.657. A1
AllWave FLEX +
ZWP Fiber
· Low loss at 7.5 mm bend radius
· Full band spectrum
G.657. A2
Indoor/Premises
12
AllWave FLEX Max Fiber
· Low loss at 5 mm bend radius
G.657. B3
Indoor/Premises
12
Metro
Access
Access
11
Indoor/Premises
11
G.652. D
G.657. A1
G.657. A2
G.657. B3
AllWave
ZWP Fiber
AllWave FLEX
ZWP Fiber
AllWave FLEX +
ZWP Fiber
AllWave FLEX Max
Fiber
125.0 ± 0.7
125.0 ± 0.7
125.0 ± 0.7
125.0 ± 0.7
≤ 0.7
≤ 0.7
≤ 0.7 %
≤ 0.7 %
≤ 0.5 (Typical: < 0.2)
≤ 0.5 (Typical: < 0.2)
≤ 0.5 (Typical: < 0.2)
≤ 0.5 (Typical: < 0.2)
235-250
235-250
235-250
237 - 247
≤ 12
≤ 12
≤ 12
≤ 12
100 (0.69 GPa)
100 (0.69 GPa)
100 (0.69 GPa)
100 (0.69 GPa)
Optical Fiber
Product specifications
• Phitsical characteristics
Cladding diameter (mm)
Cladding non-circularity (%)
Core / cladding concentricity error (offset)(mm)
Coating diameter (uncolored) (mm)
Coating / cladding concentricity error (offset)(mm)
Tensile proof test strain (kpsi)
Coating strip force (N)
1.3 - 8.9
1.3 - 8.9
1.3 - 8.9
1.3 - 8.9
up to 50.4
up to 50.4
up to 50.4
up to 50.4
at 1310 nm [Maximum / Typical]
[≤ 0.34 / ≤ 0.32]
[≤ 0.35 / ≤ 0.34]
[≤ 0.35 / ≤ 0.34]
≤ 0.35
at 1383 nm [Maximum / Typical]
[≤ 0.31 / ≤ 0.28]
[≤ 0.31 / ≤ 0.28]
[≤ 0.31 / ≤ 0.28]
≤ 0.35
at 1490 nm [Maximum / Typical]
[≤ 0.24 / ≤ 0.21]
[≤ 0.24 / ≤ 0.21]
[≤ 0.24 / ≤ 0.21]
≤ 0.24
at 1550 nm [Maximum / Typical]
[≤ 0.21 / ≤ 0.19]
[≤ 0.21 / ≤ 0.19]
[≤ 0.21 / ≤ 0.19]
≤ 0.21
at 1625 nm [Maximum / Typical]
[≤ 0.24 / ≤ 0.20]
[≤ 0.24 / ≤ 0.20]
[≤ 0.24 / ≤ 0.20]
≤ 0.23
Standard reel length (km)
•Optical characteristics
Attenuation (dB/km)
Macrobending attenuation (dB)
The maximum attenuation with bending does not exceed the specified values under the following deployment conditions:
30 mm radius, 100 turns at 1550 nm
≤ 0.05
–
–
–
≤ 0.05
–
–
–
at 1625 nm
25 mm radius, 100 turns at 1310 nm
≤ 0.05
–
–
–
≤ 0.05
≤ 0.01
–
–
at 1550 nm
at 1625 nm
–
≤ 0.05
–
–
16 mm radius, 1 turn
at 1550 nm
≤ 0.05
–
–
–
15 mm radius, 10 turns at 1550 nm
–
≤ 0.2
≤ 0.03
–
at 1625 nm
–
≤ 0.5
≤ 0.1
–
10 mm radius, 1 turn
at 1550 nm
–
≤ 0.2
≤ 0.1
≤ 0.03
at 1625 nm
–
≤ 0.5
≤ 0.2
≤ 0.10
7.5 mm radius, 1 turn
at 1550 nm
–
–
≤ 0.5
≤ 0.05
at 1625 nm
–
–
≤ 1.0
≤ 0.15
5 mm radius, 1 turn
at 1550 nm
–
–
–
≤ 0.10
at 1625 nm
–
–
–
≤ 0.25
Chromatic dispersion
Zero dispersion wavelength λ 0 (nm)
Dispersion slope at λ 0 (ps / (nm2•km))
1302 – 1322
1302 – 1322
1302 – 1322
1302 – 1322
≤ 0.090 (Typical: 0.087)
≤ 0.092 (Typical: 0.088)
≤ 0.092 (Typical: 0.088)
≤ 0.092
Mode field diameter (mm)
at 1310 nm
9.2 ± 0.4
8.5 – 9.3
8.4 – 9.2
8.3 – 9.1
at 1550 nm
10.4 ± 0.5
9.4 – 10.4 (Typical)
9.4 – 10.4 (Typical)
9.2 – 10.4
≤ 1260
≤ 1260
≤ 1260
≤ 1260
≤ 0.06 (Typical: < 0.02)
≤ 0.06 (Typical: < 0.02)
≤ 0.06 (Typical: < 0.02)
≤ 0.06 (Typical: < 0.02)
≤ 0.1
≤ 0.1
≤ 0.1
≤ 0.1
Cutoff wavelngth λ cc (nm)
Polarization mode dispersion (PMD) (ps/
Fiber PMD Link Design Value (LDV) *2
Individual fiber PMD
) *1
Group refractive index
at 1310 nm
1.467
1.467
1.467
1.467
at 1550 nm
1.468
1.468
1.468
1.468
• Environmental characteristics
Attenuation increase during / after aging at 1310 nm, 1550 nm, and 1625 nm (dB / km)
Temperature cycling (-60°C to +85°C)
≤ 0.05
≤ 0.05
≤ 0.05
≤ 0.05
High temperature aging (+85°C ± 2°C)
≤ 0.05
≤ 0.05
≤ 0.05
≤ 0.05
Temperature & humidity cycling
(-10°C to +85°C, 95% RH)
≤ 0.05
≤ 0.05
≤ 0.05
≤ 0.05
Water immersion (+23°C ± 2°C)
≤ 0.05
≤ 0.05
≤ 0.05
≤ 0.05
*1As measured with low mode coupling (LMC) technique in fiber form, value may change when cabled. Check with your cable manuacturer for specific PMD limits in
cable form.
*2The PMD link design value complies with IEC 60794-3, September 2001 (N = 20, Q = 0.01%). Details are described in IEC 61282-3 TR Ed.2, October 2006.
*Those are typical characteristics of uncabled optical fiber. Some characteristics may change after cabling. The characteristics of cabled fiber shall be confirmed for
each cable.
Furukawa Electric reserves the right to improve, enhance and modify the features and specification of this product without prior notification.
10
Metro
Access
G.652. D
AllWave ZWP Fiber
Optical Fiber
AllWave Zero Water Peak (ZWP) Fiber is ideally designed for use in metro and access networks due to its superior performance – low optical loss across the entire wavelength range from 1260 nm to 1625 nm, tightest
available geometry, low splice loss, and low polarization mode dispersion (PMD). Combined with complete
compatibility with embedded fiber base, these features provide ultimate network design flexibility and enable
cost-effective solutions to help maximize return on investment.
Features and Benefits
Access
Loss (dB/km)
●Low optical loss across the entire spectrum from 1260
nm to 1625 nm, providing a 50 percent increase in usable spectrum, enabling 16-channel CWDM as well as
DWDM support
●The water peak defect has been removed for low, stable loss performance in the 1400 nm band
●U ltra-low fiber PMD allows speed and distance upgrades
●T he industry’s tightest geometric control for lowest
splice loss and improved connectorization performance
●Macrobend performance superior to the G.652.D standard
1.2
0.9
Conventional
SM Fiber
0.6
AllWave ZWP
Fiber
0.3
}
0
1300
1400
1500
1600
Wavelength (nm)
AllWave ZWP Fiber has lower
& stable loss by removing
the water peak defect
Indoor/Premises
AllWave ZWP Fiber has over
100 nm more spectrum
CWDM 16 channels
(ITU-T G.694.2)
G.657. A1
AllWave FLEX ZWP Fiber
AllWave FLEX Zero Water Peak (ZWP) Fiber is the first Zero Water Peak G.652.D fiber to offer optimized bend
performance for Fiber-to-the-x (FTTx), enterprise networks, or any application where small bend diameters
may be encountered. Fully compliant to the new ITU-T G.657.A1 specification, AllWave FLEX ZWP Fiber is
completely compatible with all conventional single-mode fibers. AllWave FLEX ZWP Fiber maintains very low
bending loss across the full spectrum of wavelengths from 1260 nm to 1625 nm, while ensuring long-term
fiber strength and reliability. It can be coiled into a 10 mm radius loop with ≤ 0.5 dB incurred loss at 1625 nm
and ≤ 0.2 dB incurred loss at 1550 nm-five times better bend performance than conventional single-mode
and leading Low Water Peak (LWP) Fibers.
Features and Benefits
●Saves space, time, and money through improved bend performance, even for LBand wavelengths up to 1625 nm: added loss ≤ 0.5 dB (1625 nm) and ≤ 0.2 dB
(1550 nm) at 10 mm radius
●Easier to install, handle, and store in space-constrained applications such as
FTTx and premises networks
●Bend-optimized design for tight, low loss bends without risking fiber strength
and long-term reliability
●Tight geometry for very low splice loss and improved connectorization performance with G.652.D embedded base
●Fully compatible with all conventional single-mode fiber international standards
including G.657.A1 and G.652.D
●Zero Water Peak fiber provides a 50% increase in usable optical spectrum enabling 16-channel CWDM and DWDM support
11
Outstanding macrobend
performance
•100 turns on a 25 mm
radius mandrel
≤ 0.01 dB @ 1550 nm
≤ 0.05 dB @ 1625 nm
•100 turns on a 15 mm
radius mandrel
≤ 0.2 dB @ 1550 nm
≤ 0.5 dB @ 1625 nm
•1 turn on a 10 mm radius
mandrel
≤ 0.2 dB @ 1550 nm
≤ 0.5 dB @ 1625 nm
Indoor/Premises
G.657. A2
AllWave FLEX + ZWP Fiber
Features and Benefits
●Fully compliant with the ITU G.657.A2 standard; also meets all requirements of
G.657.B2 and G.652.D
●Designed for in-building, cabinet, cell site, and central office applications
●Bend optimized design for tight, low loss bends without risking fiber strength
and long-term reliability
●Tight geometry for very low splice loss and improved connectorization performance
●Excellent fusion splice performance using standard recipes
●Zero Water Peak fiber provides a 40% increase in usable optical spectrum enabling 18-channel CWDM support and much greater DWDM capacity
Indoor/Premises
Optical Fiber
AllWave FLEX+ ZWP Fiber is the first Zero Water Peak (ZWP) fiber that meets and exceeds both ITU-T G.657.
A2 and G.652.D specifications. This fiber offers enhanced bend performance ideally suited for in-building and
connectivity applications and full compatibility and compliance with the installed base of conventional G.652.
D single-mode fibers. It is an excellent choice for Fiber-to-the-Home (FTTH), cell sites, enterprise networks,
or any application where small bend diameters may be encountered.
AllWave FLEX+ ZWP Fiber maintains very low bending loss across the full spectrum of wavelengths from
1260 nm to 1625 nm, while ensuring long-term fiber strength and reliability. It can be coiled into a 7.5 mm radius loop with ≤ 0.5 dB incurred loss at 1550 nm and ≤ 1.0 dB incurred loss at 1625 nm.
Outstanding macrobend
performance
•10 turns on a 15 mm radius
mandrel
≤ 0.03 dB @ 1550 nm
≤ 0.1 dB @ 1625 nm
•1 turn on a 10 mm radius
mandrel
≤ 0.1 dB @ 1550 nm
≤ 0.2 dB @ 1625 nm
•1 turn on a 7.5 mm radius
mandrel
≤ 0.5 dB @ 1550 nm
≤ 1.0 dB @ 1625 nm
G.657. B3
AllWave FLEX Max Fiber
AllWave FLEX Max Fiber offers outstanding bend performance to a 5 mm radius for demanding in-building
and connectivity applications. Compatible to and compliant with the installed base of conventional G.652.D
single-mode fibers, it is designed for Fiber-to-the-Home (FTTH), enterprise networks,
or any application where very small bend diameters may be encountered. The fiber meets and exceeds both
ITU-T G.657.B3 and G.652.D recommendations.
AllWave FLEX Max Fiber is designed to minimize bending loss for demanding connectivity and high power
applications, especially where fiber bend radius may be unmanaged. It can be coiled into a 5 mm radius
loop with ≤ 0.10 dB incurred loss at 1550 nm and ≤ 0.25 dB incurred loss at 1625 nm. The fiber maintains extremely low bending loss across the entire optical spectrum.
Features and Benefits
●Full spectrum fiber provides a 40% increase in usable optical spectrum, enabling 18-channel CWDM support and much greater DWDM capacity
●Fully compliant with both the ITU-T G.657.B3 and G.652.D standard recommendations
●Designed for in-building, enterprise, cell site, and central office applications
●Designed to reliably support low-loss 5 mm radius bends
●Tight geometry for very low splice loss and improved connectorization performance
●Excellent fusion splice performance
Outstanding macrobend
performance
•1 turn on a 10 mm radius
mandrel
≤ 0.03 dB @ 1550 nm
≤ 0.10 dB @ 1625 nm
•1 turn on a 7.5 mm radius
mandrel
≤ 0.05 dB @ 1550 nm
≤ 0.15 dB @ 1625 nm
•1 turn on a 5 mm radius
mandrel
≤ 0.10 dB @ 1550 nm
≤ 0.25 dB @ 1625 nm
12
Optical Fiber Cable
FTTx Network deployment offers a significant challenge to the network provider.
The time proven technologies as well as innovative optical fiber cables offered by Furukawa Electric is the result of exceptional optical fibers protected by ground-breaking packaging that ensures
superior performance and durability.
We offer comprehensive solution for passive products including the variety of optical fiber cables
Optical Fiber Cable
from central office to each FTTx subscriber realizing the FTTx network construction.
OLT
Underground
cable
Aerial cable
Drop cable
Drop cable
ONU
Indoor cable
Low friction indoor cable
13
Indoor cable
EZ-Bend cable
Application
Underground
Drop
Standard cable
construction
Feature
Intl. standard of
Page
applicable fiber
Loose Tube Cable
for Direct Buried
for Duct
· Adopted worldwide
S-Slotted Core Cable
for Duct
· Helical slotted core cable
· High density fiber count
· Mass fusion splice
SZ-Slotted Core Cable
for Duct
· Easy mid-span access
· High density fiber count
· Available mass fusion splice
· QS Ribbon
Figure 8 Cable
(Loose Tube Cable
for Aerial)
· Suitable for aerial installation
ADSS Cable
(Loose Tube Cable
for Aerial)
· Suitable for aerial installation
· Consists of all dielectric elements
SZ-Slotted Core
Cable
(SSW structure)
· Suitable for aerial installation
· Easy mid-span access
· QS Ribbon
Rollable Ribbon
Cable
(SSW structure)
· Suitable for aerial installation
· Easy mid-span access
· Small diameter and light weight
· Rollable Ribbon
G.657. A1
21
Rollable Ribbon
Cable mini
(SSW structure)
· Suitable for rural area
· Easy mid-span access
· Small diameter and light weight
· Rollable Ribbon
G.657. A1
22
Drop Cable
· Easy jacket removal
· Self support structure
ACCUMAX
Distribution Cable
· Easy handling
·F
aster, easier cable preparation
Low Friction Indoor
Cable
(8-fiber)
· Low friction cable
· 8 individual fiber
· Easy jacket removal
Indoor Cable
·E
asy jacket removal
Low Friction Indoor
Cable
(1 or 2-fiber)
· Low friction cable
· Easy jacket removal
· Pushing Installation available
EZ-Bend Cable
· Allows small bending radius
· Allows copper-like installation
G.652. D
G.657. A1
G.652. D
G.657. A1
G.652. D
G.657. A1
G.652. D
G.657. A1
G.652. D
G.657. A1
G.652. D
G.657. A1
G.657. A1
G.657. A2
G.652. D
G.657. A1
15
17
Optical Fiber Cable
Aerial
Product name
18
16
16
19
24
25
Riser for MDU
Indoor
G.657. A1
G.657. A1
G.657. A2
G.657. A1
G.657. A2
G.657. B3
26
27
28
29
14
Underground
Aerial
G.652. D
G.657. A1
Loose Tube Cable
Innovative loose tube cable designs from Furukawa Electric fulfill the need for every situation, and
provide excellent performance. Our complete portfolio offers cables with increased fiber density
and easy deployment for a wide range of installations, including duct, aerial (Lashed and self-supporting), and direct buried.
Optical Fiber Cable
Features and Benefits
● Time proven technologies with a proven history
● Available with full range of fiber types
● Fulfilling the needs for every situation (Duct, aerial, direct buried, and indoor application)
● Dry core technology for a more craft-friendly, jelly-free cable core, resulting easy of handling
● Available for metallic or non-metallic central strength member
● Proven loose tube design provides outstanding optical fiber protection
● Armored structure provides outstanding mechanical strength and enhanced rodent protection
● Ripcord allows easy jacket removal
Construction
Underground cable
•Double jacket (Direct buried)
Gel-filled buffer tube
Optical fibers
Central strength member
Central member jacket
Additional strength elements
Corrugated steel armor
Inner PE jacket
Outer PE jacket
DryBlock water blocking material
Ripcord(s)
•Single jacket Gel-filled
(Duct)buffer tube
Optical fibers
Central strength member
Central member jacket
Additional strength elements
Corrugated steel armor
Inner PE jacket
Outer PE jacket
DryBlock water blocking material
Ripcord(s)
6 mm suspension wire
DryBlock water blocking material
15
Additional strength elements
Filler rod
Gel-filled buffer tube
Optical fibers
6 mm suspension wire
Central strength member
DryBlock water blocking material
Central member jacket
Additional
strength
elements
Additional
strength
elements
Filler rod
Dielectric central strength member
Outer PE jacket
Ripcord(s)
DryBlock water blocking material
Filled loose buffer tube
PE jacket
Ripcord(s)
Buffer tube
Optical fibers
Central strength member
Central member jacket
Inner jacket sheath strength elements
Additional strength elements
Corrugated steel armor
Inner PE jacket
Outer PE jacket
DryBlock water blocking material
Ripcord(s)
Aerial cable
Gel-filled buffer tube
Optical fibers
Central strength member
Central member jacket
Additional strength elements
Corrugated steel armor
Inner PE jacket
Outer PE jacket
DryBlock water blocking material
•Figure 8
Gel-filled buffer tube
Optical fibers
6 mm suspension wire
Central strength member
DryBlock water blocking material
Central member jacket
Additional
Additionalstrength
strengthelements
elements
Filler rod
Dielectric central strength member
Outer PE jacket
Ripcord(s)
DryBlock water blocking material
Filled loose buffer tube
PE jacket
Ripcord(s)
Ripcord(s)
•ADSS
DryBlock water blocking material
Additional strength elements
Filler rod
Dielectric central strength member
Optical Fiber Cable
Buffer tube
Optical fibers
Central strength member
Central member jacket
6 mm suspension wire
Inner jacket sheath strength elements
DryBlock water blocking material
Ripcord(s)
Filled loose buffer tube
PE jacket
Outer PE jacket
Ripcord(s)
Specification
Item
Fiber count
Outer
diameter (mm)
Weight (kg/km)
Specification for underground cable
2-60
61-72
73-96
97-120
121-144
145-216
217-240
241-288
Double jacket
12.9
13.6
15.3
17.0
18.6
18.3
19.1
20.9
Single jacket
10.1
10.7
12.5
14.1
15.7
15.4
16.2
18.0
Double jacket
162
182
223
280
318
306
351
388
Single jacket
77
88
116
149
186
173
195
234
Maximum pulling tension (N)
Minimum bending
radius (mm)
2700
Double jacket
129
136
153
170
186
183
191
209
Single jacket
101
107
125
141
157
154
162
180
Item
Fiber count
Outer
diameter (mm)
Weight (kg/km)
Specification for aerial cable
Figure 8
2-60
ADSS
2-30
Figure 8
ADSS
Figure 8
ADSS
Maximum pulling
tension (N)
Figure 8
Minimum bending
radius (mm)
Figure 8
ADSS
ADSS
11×20.3
62-72
74-96
31-288
12.2×24
14×25.9
Based on maximum pulling tension
311
336
372
Based on maximum pulling tension
2700
Based on customer’s requirement
203
240
259
10×cable diameter
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior
notification.
16
Underground
G.652. D
G.657. A1
S-Slotted Core Cable
Helical slotted (S-slotted) core cable is designed for feeder
cable in underground duct application.
Either 4-fiber or 8-fiber ribbons are accommodated into the
grooves, reducing the splicing time during the installation.
Optical Fiber Cable
Features and Benefits
● High density fiber count - Up to 1000-fiber counts are available
● Mass fusion splice - Reduces the splicing time
● Totally dry core structure enhances the installation workability
● Proven slotted core design provides outstanding optical fiber protection
● Available with full range of fiber types
● Cable structure is customizable upon the request
Cross Sectional View of Fiber Ribbon
■ 4-fiber ribbon
Optical fiber
Color coating
Item
Fiber count
Material
Thickness
Ribbon coating
(μm)
4-fiber ribbon
8-fiber ribbon
4
8
UV curable acrylate
Width
1100±100
Thickness
Ribbon coating
Identification
Width
2100±100
320±50
Color coating
■ 8-fiber ribbon
Specification
Item
Specification
Fiber ribbon type
Fiber count
4-fiber ribbon
8-fiber ribbon
4 - 40
44 - 100
104 - 200
204 - 300
304 - 400
408 - 600
Outer diameter (mm)
9.5
11.5
15.5
19
19.5
22.5
28
Weight (kg/km)
80
110
180
275
290
400
580
1570
1570
1930
2560
3270
4070
4070
95
115
155
190
195
225
280
Maximum pulling tension (N)
Minimum bending radius (mm)
608 - 1000
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Fundamental Construction
Example of cross sectional view
Structure of Core
17
1000-fiber type
300-fiber type
4-fiber ribbon
8-fiber ribbon
Central strength member
Central strength member
S-slotted core
Wrapping
Ripcord
Jacket
S-slotted core
Wrapping
Ripcord
Jacket
Underground
G.652. D
G.657. A1
SZ-Slotted Core Cable
SZ-slotted core cable is designed for feeder cable in underground duct application and/or mid-span access (mid-span
cable branch), realizing the ease of FTTx network construction. Either 4-fiber or 8-fiber ribbons are accommodated into
the grooves, reducing the splicing time during the installation.
Optical Fiber Cable
Features and Benefits
● Easy mid-span access
● High density fiber count - Up to 800-fiber counts are
available
● Mass fusion splice - Reduces the splicing time
● Totally dry core structure enhances the installation workability
● Proven slotted core design provides outstanding optical
fiber protection
● Available with full range of fiber types
● Cable structure is customizable upon the request
Cross Sectional View of Fiber Ribbon
■ 4-fiber ribbon
Optical fiber
Item
Color coating
4-fiber ribbon
8-fiber ribbon
4
8
Optical fiber count
Material
Ribbon coating
(μm)
Thickness
UV curable acrylate
Width
1100±100
Thickness
Ribbon coating
Identification
Width
2100±100
320±50
Color coating
■ 8-fiber ribbon
Specification
Item
Specification
Fiber ribbon type
Fiber count
4-fiber ribbon
8-fiber ribbon
4-24
28 - 60
64 - 100
104 - 200
204 - 300
304 - 400
408 - 640
648 - 800
Outer diameter (mm)
9
10.5
13
16.5
21
20.5
23
28.5
Weight (kg/km)
65
85
115
185
305
260
360
510
Maximum pulling tension (N)
950
1240
1930
2560
3270
3270
5540
5540
Minimum bending radius (mm)
90
105
130
165
210
205
230
285
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Fundamental Construction
Cable core structure
Example of cross sectional view
640-fiber type
200-fiber type
The ribbon is easily taken off from the slotted
core at the any point of the network (midspan access).
4-fiber ribbon
Central strength member
8-fiber ribbon
Central strength member
SZ-slotted core
Wrapping
Ripcord
Jacket
SZ-slotted core
Wrapping
Ripcord
Jacket
18
Aerial
G.652. D
SZ-Slotted Core Cable for Aerial
(SSW structure)
G.657. A1
SZ-Slotted Core Cable for Aerial is designed especially for
aerial application with enhancing the mid-span accessibility.
Furthermore, this cable has a slack between the cable and
self supporting wire, possessing the ability to reduce the ten-
Optical Fiber Cable
sion that applies to cable from the environmental conditions.
Features and Benefits
● Designed especially for aerial application.
● Easy mid-span access
● Slack between the cable and self supporting wire
● Totally dry core structure enhances the installation workability
● Proven slotted core design provides outstanding optical fiber protection
● Available with full range of fiber types
● Up to 400-fiber counts are available
SSW Structure for Mid-Span Access
Mid-span access is easily conducted
Self-supporting wire
SZ-slotted core cable
by instruction shown in right figure.
Cut the joints which fix
between main cable and supporting wire
Self-supporting wire will still maintain
the cable properties after the mid-span
access.
SZ-slotted core
Fiber ribbon
Drop cable
Specification
Item
Specification
Fiber ribbon type
4-fiber ribbon
Fiber count
8-fiber ribbon
4-24
28-60
64-100
104-200
204-300
7
7
7
7
7
7
1.8
2
2
2
2
2
Diameter of cable part (mm)
9
10.5
13.5
17
21
21
Height of overall cable (mm)
20.5
22.5
25.5
29
33
33
Weight (kg/km)
230
285
330
400
505
460
2180
Supporting wire
Maximum pulling tension (N)
Minimum bending radius (mm)
Count
Wire diameter (mm)
Cable part
630
820
1290
1710
2180
Supporting wire
6100
7540
7540
7540
7540
Dynamic: 410
Static: 205
Dynamic: 450
Static: 225
Dynamic: 510
Static: 225
Dynamic: 580
Static: 290
Dynamic: 660
Static: 330
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
19
308-400
7540
Dynamic: 660
Static: 330
Aerial
G.652. D
G.657. A1
QS Ribbon
(for SZ-Slotted Core Cable)
QS Ribbon (Quick Separate Ribbon) is easily separated into
individual fibers with the associated tools, realizing the ease
4-fiber ribbon
of mid-span accessibility. This technology allows single
drop application without any influence to other fibers inside
this ribbon. The QS Ribbon will fusion splice to standard
ribbon using current technology. This ribbon is accommo-
Separate only
required fiber
Optical Fiber Cable
dated in SZ-slotted core cable.
QS Ribbon separating tool:
QS101(option)
Features and Benefits
● Able to separate into individual fiber with using associated tools
● Able to splice with standard 4-fiber ribbon
● Designed for mid-span branch joint
● QS Ribbon is offered with SZ-slotted core cable design
Example of the Construction
Cable (e.g SZ-slotted core cable)
4-fiber ribbon
Separate only required fiber
Spliced to drop cable
Drop
cable
Only required fiber will be cut from 4-fiber ribbon,
other remaining fibers could be used at next point.
20
Aerial
G.657. A1
Compact Sized & Light Weight Aerial Cables
Rollable Ribbon Cable
(SSW structure)
Rollable Ribbon Cable combines good features of ribbon
fiber and single fiber. It was developed with the concept of
easy handling (small size and light weight) and enabling
easy mid-span branching. The diameter is 30% smaller and
the weight is 50% lighter than conventional aerial cable (SZ-
Optical Fiber Cable
Slotted Core Cable for Aerial).
Features and Benefits
●Smaller diameter and lighter weight due to using Rollable Ribbon and not using slot spacer
●Non slotted rod structure, like center core cable, and Rollable Ribbon make the cable size smaller and save space comparing to the conventional ribbon slotted core cable
●Rollable Ribbon is especially adopted to mass fusion splice as standard ribbon
●It has slack between the cable and the supporting wire to reduce wind pressure
Specification
Item
Specification
Fiber ribbon type
4-fiber Rollable Ribbon
Fiber count
24
Cable core construction
60
100
7
7
7
7
7
1.4
1.4
1.4
1.4
Diameter of cable part (mm)
9
9
9.5
10.5
12
Height of overall cable (mm)
17.5
17.5
18
18.5
20.5
Weight (kg/km)
165
165
170
180
200
Maximum pulling Cable part
tension (N)
Supporting wire
392
392
392
392
392
Wire diameter (mm)
Strength member
Minimum bending radius (mm)
0.7mm steel wire x 2
1960
Dynamic: 250
Static: 300
1960
Dynamic: 250
Static: 300
1960
Dynamic: 250
Static: 300
1960
Dynamic: 250
Static: 300
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
21
200
20-fiber unit x 5 20-fiber unit x 10
1.4
Supporting wire
Count
40
4-fiber ribbon x 6 4-fiber ribbon x 10 20-fiber unit x 3
1960
Dynamic: 250
Static: 300
Aerial
G.657. A1
Compact Sized & Light Weight Aerial Cables
Rollable Ribbon Cable mini
(SSW structure)
Rollable Ribbon Cable mini is the cable reduced the dimensions and weight for easier handling. This cable includes
Rollable Ribbon which is especially adopted to mass fusion
splice. This cable is small fiber count cable and is suitable
for rural area.
Optical Fiber Cable
Features and Benefits
●Rollable Ribbon Cable mini is small diameter and light weight
●24 fibers aerial cable
●Rollable Ribbon is especially adopted to mass fusion splice as standard ribbon
●Rollable Ribbon Cable mini has slack between the cable and the supporting wire to reduce wind
pressure
●Using customized sheath removing tool, the sheath can be easily removed and we can access
the ribbon fibers at mid-span
Sheath Removing
Sheath Removing Tool
Clamp the cable and slide
the tool on the sheath
The sheath is cut into 4
pieces and fibers come off
naturally
Specification
Item
Specification
Fiber count
24
Ribbon fiber
4-fiber Rollable Ribbon x 6
Supporting wire (mm)
Strength member (mm)
Cable dimension (WxH mm)
Weight (kg/km)
Maximum pulling tension (N)
Steel wire : Φ 2.6
Supporting wire
Strength member
Steel wire : Φ 0.5 x 2
4x10
60
Rollable Ribbon
700 (390 for cable part )
*This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the
specification of these products without prior notification.
Protector
Sheath
22
Aerial
G.657. A1
Rollable Ribbon
Rollable Ribbon has Advanced Quick Separation mechanism for single fiber separation. In Rollable Ribbon, individual fibers are partly bonded to each other in a interval.
Because of this structure, Rollable Ribbon can be separated to individual fibers much more easily than conventional
Schematic illustration
Optical Fiber Cable
ribbon fibers with no special tool.
Features and Benefits
●Rollable Ribbon can be separated to individual fibers at the end of the cables much more easily by
hand than conventional ribbon fibers.
●Rollable Ribbon can be spliced to conventional ribbon fibers (standard encapsulated ribbon or QS
Ribbon) by ribbon to ribbon splice using conventional ribbon splicer
●Rollable Ribbon is flexible in width direction and can be even rolled. This realizes high fiber density
cable
23
Drop
G.657. A1
G.657. A2
Drop Cable
Drop cable is designed for last-one-mile in the FTTx network, enhancing the accessibility to the fiber and maximizes
the installation workability.
Optical Fiber Cable
Features and Benefits
● Time proven technologies with long supplied record
● Easy jacket removal without special tools
● Self support structure
● Compact cable size
● Available with flame retardant jacket
● Available from 1 to 8-fiber counts
2 mm
2 mm
2 mm
Strength
member
1-fiber
6 mm
Optical fiber
5 mm
5 mm
Supporting
wire
6 mm
2 mm
2-fiber
4-fiber ribbon
2×4-fiber ribbon
Specification
Item
Specification
Cable type
Drop cable
Fiber count
1
Cable dimension (WxH mm)
2
Steel wire: Φ 0.4
Metallic
FRP: Φ 0.5
Non-metallic
Weight (kg/km)
20
Maximum pulling tension (N)
With supporting wire
Minimum bending
radius (mm)
Without supporting wire
Standard length (m)
8
2x6
Φ 1.2
Supporting wire (mm)
Strength member
(mm)
4
2x5
25
690
240
metallic
Dynamic: 30 Static: 15
non-metallic
Dynamic: 50 Static: 15
Dynamic: 50
Static: 50
500
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
24
Riser for MDU
G.652. D
G.657. A1
ACCUMAX Distribution Cable
Optical Fiber Cable
ACCUMAX fiber optic distribution, Low Smoke Zero Halogen (LS0H) cables have the flexibility to handle virtually any
application between the building entrance and the desktop
in most environments from office to factory floor. ACCUMAX
LS0H, non lead cable is especially suitable for installation in
riser shafts, above drop ceilings, under raised floors, or in
conduits. This robust cable is available in a variety of fiber
counts and offers all the advantages associated with the
ACCUMAX cable product family — including easier, faster,
and lower installation cost.
Features and Benefits
● Easy handling
● Faster, easier cable preparation
● Cable fiber counts are 2 to 144
● Various fiber types are available
● Flame testing proved that ACCUMAX LS0H cables meet the IEC60332-3C and UL 1666 standards
● Smoke tests prove that ACCUMAX LS0H cables meet the IEC601034-2 standard
● The ACCUMAX cable design eliminates both the extra steps required to remove the jacket and
the risk of broken fibers. Each flexible riser rated jacket or unit can be ringed and slipped off with
a simple tool, no ripcords or razor blades are required
● Small diameter, lightweight cables occupy less space in trays and conduits, reduce loads, and
contribute to greater efficiency during installation
Specification
Item
Specification
Single tube
Fiber count
Outer diameter (mm)
4
6
8
12
18
24
18
4.0
4.4
5.0
5.4
6.0
14.8
14.8
14.8
Unit fiber count
Weight (kg/km)
—
14.3
Maximum pulling tension (N)
Minimum bending radius (mm)
Multi tube
2
17.1
22.5
28.5
44
50
30.8
48
82
171
1334
54
36
48
72
96
144
14.8
14.1
20.4
20.4
22.4
23.9
6
1223
40
24
60
79
12
166
163
2224
86
147
313
332
141
204
*This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
*We can adapt the cable specification to LS0H, Riser, Plenum upon customer request.
Cross Sectional View
Outer jacket (LS0H)
Color coded unit tube
Central organizer
Tight buffer fiber
Aramid yam
25
528
2700
458
4445
223
238
Riser for MDU
G.657. A1
Cables for Pushing Installation
Low Friction Indoor Cable (8-fiber)
Low Friction Indoor Cable (8-fiber) is designed for MDU application in the FTTx network especially where the duct is
congested with existing cable. Feature of compact size and
low friction sheath allows easy installation. Low Friction Indoor Cable is suitable for vertical wiring.
Optical Fiber Cable
Features and Benefits
*1
● Reduce friction coefficient over 75%
● Allows pushing installation
● High flame retardant cable for MDU network
● LS0H (Low-Smoke Zero Halogen) cable
*1 Compared to conventional indoor cable
Construction
Low friction sheath
4.2mm
Strength member
Optical fiber
2.8mm
Specification
Item
Specification
Cable type
Indoor cable
Fiber type
G.657.A1
Fiber diameter (µm)
Fiber count
250
8
Cable dimension (WxH mm)
2.8 x 4.2
Strength member
Steel wire
Weight (kg/km)
15
Maximum pulling tension (N)
200
Minimum bending radius (mm)
Standard length (m)
Dynamic: 165, Static: 50
400
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
26
Indoor
G.657. A1
G.657. A2
Indoor Cable
Indoor cable is designed for premise application in the
FTTx network enhancing the accessibility to the fiber and
Optical Fiber Cable
maximizes the installation workability.
Features and Benefits
● Time proven technologies with long supplied record
● Easy jacket removal without special tools
● Compact cable size
● Available with flame retardant jacket
● Available from 1 to 8-fiber counts
2 mm
2 mm
2 mm
2 mm
Optical fiber
4 mm
4 mm
3 mm
3 mm
Strength member
1-fiber
2-fiber
4-fiber ribbon
2×4-fiber ribbon
Specification
Item
Specification
Cable type
Indoor cable
Fiber count
1
Cable dimension (WxH mm)
Strength member
(mm)
Non-metallic
8
2×4
FRP: Φ 0.5
10
Metallic
Minimum bending radius (mm)
Standard length (m)
4
Steel wire: Φ 0.4
Metallic
Non-metallic
Weight (kg/km)
Maximum pulling
tension (N)
2
2×3
11
147
60
Dynamic: 30
Static: 15
Dynamic: 50
Static: 50
500
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
27
G.657. A1
Indoor
G.657. A2
Cables for Pushing Installation
Low Friction Indoor Cable
(1 or 2-fiber)
Low Friction Indoor Cable is designed for premise application in the FTTx network especially where the duct is
congested with existing cables. Feature of compact size
and low friction sheath allows pushing installation. White
colored cable technology prevents aesthetic issues. Low
Friction Indoor Cable is also suitable for vertical wiring due
Optical Fiber Cable
to high flame retardant property.
Features and Benefits
*1
● Downsized to 50% (1 fiber cable)
*1
● Reduce friction coefficient over 75%
● Allows pushing installation into ducts
● High flame retardant solution for MDU network
● LS0H (Low Smoke Zero Halogen) cable
● Easy jacket removal with nippers
*1 Compared to conventional indoor cable
Construction
2 mm
1.6 mm
2 mm
3 mm
Twisted and tangled free
packing
1-fiber
2-fiber
Pushing installation
available
Multi-cable installation in
a pipe
Specification
Item
Specification
Cable type
Fiber count
Cable dimension (WxH mm)
Indoor cable
1
1.6 x 2
7
Maximum pulling tension (N)
11
200
Minimum bending radius (mm)
Standard length (m)
2x3
Steel wire : Φ 0.5 x 2
Strength member (mm)
Weight (kg/km)
2
Dynamic :30, Static : 15
1000
500
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
28
Indoor
G.657. B3
EZ-Bend Cable
EZ-Bend cable helps speed and simplify indoor optical
drop cable installations using breakthrough technology
pioneered by OFS. EZ-Bend cable can be routed around
corners and stapled using traditional fast and easy copper wire installation practices, with negligible signal loss.
Ideal for aggressive routing environments where space
Optical Fiber Cable
is at a premium, EZ-Bend cable offers reliable support
for MDU drop and in-home wiring applications, and can
support great-quality high-definition television (HDTV),
on-demand video, ultra high speed data, voice, online
OFS
Offers
EZ-Bend
4.8
Cable
EZ-Bend
3.0
Riser
Plenum
LS0H
Indoor/
Outdoor
Riser
Plenum
LS0H
Cable
gaming and many other revenue-generating services.
Features and Benefits
● 4.8 mm or 3.0 mm diameter simplex ruggedized cordage
● Less than 0.1 dB macrobending attenuation at 1550 nm for 1 turn at 5 mm fiber bend radius
● Solid construction fiber with macrobending performance far better than ITU-T G.657B3 exceed
● Backward compatible with installed G.652D fibers
● Conform to UL Riser and Plenum fire ratings
● Compliant with Telcordia 409 & ICEA S-85-596 requirements
● Featuring EZ-Bend Optical Technology, a breakthrough developed by OFS Labs
● “Copper-Like” installation process: Can be routed around corners using familiar
copper wire practices
● Faster, easier installation: No extra steps to install bend limiters, conduits, or raceways
● Compact installation and storage: Conforms to building, slack fits in small storage
spaces
● Fast, easy, low loss splicing: Splicing to G.652D fiber with existing core and clad aligned splice equipment
● Familiar, standard connector termination: Solid fiber construction can be terminated using standard process
● Familiar connector endface cleaning: Using same process as with existing G.652 solid construction fiber
● MDU and in-home optimized: Ideal for in-residence wiring and difficult installation routes in MDU overbuilds
● Greener Solution: Free of heavy metals and RoHS-compliant, solution uses less total materials
Strong, Reliable Performance
Some tests performed on an EZ-Bend 4.8 mm cable subjected to
a more stringent configuration than specified by the rigorous Verizon MDU simulation test (TPR 9424), showed over 65% better loss
performance than the 0.4 dB maximum specified for TPR 9424. In
one of the tests (pictured above), the EZ-Bend cable was enduring
the sum of 40 corners, 30 staples, one 90 degree corner with 30
lbs tension, one 90 degree corner with 5 lbs tension, with a very
low loss (pictured in the power meter window above). Also pictured
above is an X-Ray taken of the cable bend around the OFS logo’ed
box.
29
Optical Fiber Cable
30
Closure, Cabinet and Splitter
Optical connection management presents many challenges depending on the location and conditions of the network. Wide variety connectivity products from Furukawa Electric fulfill the needs,
designed to serve business, SFU, and MDU and many more applications. Our connectivity offer
also includes closure and cabinet with various types of splitters inside.
■Closure
Application
Product name
Max. connection/Method
Fusion splice
Connector
(Individual fiber)
(Single)
Splitter*
Appearance
Page
J363
150
—
1×4
1×8
33
J380EX
60
—
—
34
J396L3
100
—
1×4
1×8
1×16
35
J397
10
—
1×4
1×8
36
Underground
Closure/Cabinet/Splitter
Aerial
*Allowable type of splitter inside the closure.
■Cabinet
MDU
Application
Indoor (V-Linx)
MDU
Indoor
Termination
Outdoor
Termination
Product name
Max. connection/Method
Fusion splice
Connector
(Individual fiber)
(Single)
Splitter*
Appearance
Page
V-Linx Fiber
Distribution Hub
(FDH)
120
—
1×32 splitter
(Built-in)
39
V-Linx Combiner
—
60 (12 MPO)
—
40
V-Linx Terminal
—
12 (SC)
—
41
J420
SS/S/M
8/40/120
—
J422
SS/S/M
—
8/40/120
(SC)
J421
SS/S/M/L
—
8/40/120/200
(SC)
Cabinet E-SS
4
(4-fiber ribbon)
16 (SC)
1x4
1x8
44
J423
S-SS
8
—
1×4
1×8
45
J423
H-SS
8
—
1×4
1×8
45
1×4 (SS/S/M)
1×8 (S/M)
1×16 (S/M)
1×32 (S/M)
1×4 (SS/S/M)
1×8 (S/M)
1×16 (S/M)
1×32 (S/M)
1×4 (SS/S/M/L)
1×8 (S/M/L)
1×16 (S/M/L)
1×32 (S/M/L)
42
42
43
*Allowable type of splitter inside the closure.
31
Application
Product
name
Max. connection count
Fusion splice
Connector
(Individual fiber)
(Single)
Splitter*
Appearance
Page
J417
4
2 (SC)
—
47
J425
—
2 (SC)
—
48
J426
2
—
—
48
J418
4
—
—
47
J428N
—
1(SC)
—
49
Indoor
Outdoor
MDU/SFU
Demarcation point
Indoor
Closure/Cabinet/Splitter
Rosette
*Allowable type of splitter inside the cabinet.
■Splitter module
Application
Product name
Max. connection
count
Splitter*
Indoor
Splitter Module
4/8 (SC)
1×4 / 1×8
46
Splitter Module- WM
4/8 (SC)
1×4 / 1×8
46
Page
MDU
Appearance
Indoor
Outdoor
■Splitter
Product name
Split
PS202
1×4, 1×8
1×16
1×32
2×4, 2×8
2×16
2×32
Dimension (mm)
(Bare fiber type)
W4×D4×L50
W5×D4×L50
W7×D4×L50
W4×D4×L50
W5×D4×L60
W7×D4×L60
PS202
2×1×8
W6 x D4 x L40
Appearance
Page
50
50
Other passive products are also available. Please contact us for more details.
32
Underground
Underground Closure J363
The J363 closure is for underground application suitable for high fiber count connections (Max. 1200 fiber
splicing). Compact design allows installation in hand
hole, which is suitable for feeder cable connection.
Features and Benefits
Closure/Cabinet/Splitter
● Underground application
● Allows installation in hand hole (Small size)
● High fiber counts connection
● Enable to accommodate water immersion sensor (Optional)
Specification
Item
Specification
Product No.
Dimension (H×W×L mm)
Remark
J363 <T9>
—
200×200×550
—
Weight (kg)
11
—
Water proof
IPX7
—
Temperature: -20 to +60°C
Humidity: 0 to 100%RH
—
Max. fiber
splices
Max. cable
entry
Environmental condition
Φ 7-30 mm
2 cables/side
Φ 8-35 mm
1 cables/side
Information for cable outer diameter
is required
Strength member outer diameter (mm)
≤6
—
Single fiber
150
10 splices/tray
2-fiber ribbon
300
10 splices/tray
Cable size
4-fiber ribbon
600
10 splices/tray
8-fiber ribbon
1200
10 splices/tray
1×4, 1×8
—
Applicable splitter
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Installation
33
A1
B1
A2
B2
A3
B3
Position
Applicable cable size
Position
Applicable cable size
A1 (mm)
Φ 7-30
B1 (mm)
Φ 7-30
A2 (mm)
Φ 8-35
B2 (mm)
Φ 8-35
A3 (mm)
Φ 7-30
B3 (mm)
Φ 7-30
Underground
Underground Closure J380EX
The J380EX closure is for underground application with 60 fiber
splice capability. Compact design allows installation in hand
hole. Accommodation 1 main cable and 1 distribution cable entry
on one side.
Features and Benefits
● Underground application
● Up to 60 fiber splicing
● Allows installation in hand hole (Small size)
Closure/Cabinet/Splitter
Specification
Item
Product No.
Specification
Remark
J380EX
—
130x155x350
—
Weight (kg)
4kg
—
Water proof
IPX7
—
Temperature: -20 to 60°C
Humidity: 0 to 100%RH
—
Dimension (H×W×L mm)
Environmental condition
Max. cable entry
Φ 8-12 mm
Single fiber
Max. fiber 2-fiber ribbon
splices
4-fiber ribbon
2 cables/side
—
60
12 splices/tray
80
8 splices/tray
160
8 splices/tray
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Installation
A1
A2
B1
Position
Applicable cable size
Position
Applicable cable size
A1 (mm)
Φ 8-12
B1 (mm)
Φ 8-12
A2 (mm)
Φ 8-12
B2 (mm)
Φ 8-12
B2
34
Aerial
Aerial Closure J396L3
The J396L3 closure is for aerial application which accommodates 1 main cable, 2 distribution cable, and
16 drop cable entry on one side. Various cable type
entries allow ease of FTTx network construction.
Features and Benefits
Closure/Cabinet/Splitter
● Small size and light weight
● Up to 240 fiber splicing (Max. 400 fiber splicing)
● Suitable for FTTx construction
● Ease of installation
● Able to place closure over the installed cable
● Wide wiring space allows ease of operation
● 1×8 splitter module installable as well as bare splitter
1×8 Splitter module
Specification
Item
Specification
Product No.
J396L3<P04><SP0>
Dimension (H×W×L mm)
Remark
J396L3<P06><SP0>
—
110×110×860
—
Weight (kg)
2
—
Water proof
IPX4
—
Temperature: -20 to +60°C
Humidity: 0 to 100%RH
—
1 cable/side
—
2 cables/side
—
16 cables/side
—
Max. fiber
splices
Max. cable
entry
Environmental condition
Main cable
Φ 8-24 mm
Distribution cable
Φ 8-18 mm
Drop cable
Single fiber
72
120
24 splices/tray
2-fiber ribbon
120
200
20 splices/tray
4-fiber ribbon
240
400
20 splices/tray
8-fiber ribbon
240
400
10 splices/tray
Applicable splitter type(Bare splitter)
Max. count of 1×8 splitter module
1×4, 1×8, 1×16
Installed in fiber tray
2 sets
—
SC connecter interface
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Installation
A1. Main cable
A2. Distribution cable
A3. Distribution cable
A4. Drop cables
35
B1. Main cable
B2. Distribution cable
B3. Distribution cable
B4. Drop cables
Position
Applicable cable type
Position
A1
Main cable
B1
Applicable cable type
Main cable
A2
Distribution cable
B2
Distribution cable
A3
Distribution cable
B3
Distribution cable
A4
Drop cable
B4
Drop cable
Aerial
Aerial Closure J397
The J397 closure is for aerial application which accommodates 1 main cable, and 2 distribution cable or
6 drop cable entry on one side.
Features and Benefits
● Ultra Small size and light weight
● Up to 10 fiber splicing
● Suitable for FTTx construction
● Ease of installation
● Able to place closure over the installed cable
● Sealing is just to cover with sleeve
Closure/Cabinet/Splitter
Specification
Item
Product No.
Specification
Remark
J397<FULL><SP0>
—
70×110×550
—
Dimension (H×W×L mm)
Weight (kg)
2
—
Water proof
IPX4
—
Temperature: -20 to +60°C
Humidity: 0 to 100%RH
—
1 cable/side
—
3.3×7 mm
1 cable/side
Rural area cable
Φ 8-11.5 mm
2 cables/side
—
Environmental condition
Max. cable
entry
Drop cable
6 cables/side
—
Max. fiber
splices
Φ 8-16.5 mm
Main cable
Single fiber
10
10 splices
2-fiber ribbon
20
10 splices
4-fiber ribbon
40
10 splices
1×4, 1×8
Installed in fiber tray
Distribution cable
Applicable splitter
*T
his is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Installation
A1. Main cable
B1. Main cable
A2. Distribution
cables
B2. Drop cables
Applicable
cable type
Position
A1
Main cable
B1
Main cable
A2
Distribution cable
or Drop cable
B2
Distribution cable
or Drop cable
Position
Applicable
cable type
36
MDU
V-Linx
Spool & Play Solution
Indoor (V-Linx)
The Multi Dwelling Unit (MDU) environment offers
a significant challenge to the network provider.
Ranging from older existing buildings to new constructed facilities, the cabling strategy can vary
greatly.
The new V-Linx spool and play solution introduced
by OFS is designed to address the varying conditions in MDU infrastructure.
Uniquely designed for dense, multi-floor units, the
V-Linx Solution provides components that can be configured flexibly to address the profusion of
cabling conditions within both Greenfield and Brownfield environments.
The deployment of the V-Linx solution can significantly speed installation and requires less labor to
Closure/Cabinet/Splitter
install the backbone by using our short length spool-and-play technology.
A simple set of spool-and-play hardware allows a small service team of one or two people to install
the entry distribution cabinet, route a few factory-built riser assemblies, and plug drop boxes to the
riser quickly and efficiently into the MDU.
The system is designed to minimize multiple long-run riser installations and eliminate splice time.
These hubs are designed to enable small crews to deploy entire systems in hours versus traditional large crews taking days.
Features and Benefits
● Easier installation allows companies to start providing services sooner
● Better cost-benefit relation due to lower overall installation costs
● Lower hardware costs than traditional systems
● Less manpower and resources needed for installation and maintenance
● Shorter spans can minimize cable pulling issues
● Preinstalled factory assembly helps reduce labor to prepare drop boxes
● Integrated multiple mounting methods can simplify installation in unknown
37
31 - 36
Key Components of the V-Linx Spool and Play Solution
EZ-Bend Cable
V-Linx Combiner
V-Linx Terminal
V-Linx Fiber Distribution Hub (FDH)
NO.
1 V-Linx Fiber Distribution Hub (FDH) (P.39)
● Design enabled by AllWave FLEX ZWP Fiber
● Uses compact PLC splitter technology
● Quick provision of circuits with SCA connectors
inimal cable management from use of optimized splitter cable
●M
lengths
● Up to four 1×32 splitter modules, 144 ports per FDH.
NO.
2 V-Linx Combiner (P.40)
Closure/Cabinet/Splitter
● Compact size
● Supports aggregation of up to 72 units (60 most common)
● Uses multi-fiber connector interface
● 0.35 dB loss per MPO connection
● Integrated with V-Linx cables at the factory
● Field integration of V-Linx cables optional
● Up to 200 feet of riser cable
NO.
3 V-Linx Terminal (P.41)
● Hands-free fiber pay-off operation
● Integrated spool axel for fiber storage
● Spool-and-Play functionality from the factory
● 50 – 300 feet of integrated round ribbon cable
● Parking adapters for units not in service
● Wall mountable onto multiple surfaces
● Highly compact design
● AllWave FLEX ZWP Fiber enabled design
NO.
4 EZ-Bend Cable (P.29)
● Provide tight bend routing capability to reach each living unit
with a flexible design, and remarkable durability and optical
performance.
● Factory assembled to create high performance terminations as
single or double ended assemblies
● Common industry splicing or connectors can be used with the
single ended drops in those unique situations needing exact
lengths
38
Indoor (V-Linx)
MDU
NO.1
V-Linx Fiber Distribution Hub
The V-Linx Fiber Distribution Hub (FDH) can support up
to 144 units/128 splitter ports and is designed for NEMA
12 performance. The FDH is size optimized by leveraging the very compact PLC splitter. Its flexible design supports either mass fusion splicing in the field or rapid connection through multifiber push-on (MPO) terminations.
The mounting hardware is re-configurable to support
a variety of wall mounting scenarios in both Greenfield
and Brownfield deployments. The FDH is also designed
to be installed by a single technician.
Features and Benefits
Closure/Cabinet/Splitter
● Design enabled by AllWave FLEX ZWP Fiber
● Uses compact PLC splitter technology
● Quick provision of circuits with SCA connectors
● Minimal cable management from use of optimized splitter cable lengths
Specification
Item
Specification
Dimension (W x H x D mm)
458×508×254
Weight (kg)
20.8
Pallet count (# Master, Total #)
8 per pallet
Number of terminations
144 total/128 active
Wall mountable
All surfaces
Color
Light beige
Frame retardance
UL-94, V-0
In use temperature rating (°C)
-5 to +50
Storage temperature rating (°C)
-20 to +70
Water rating (NEMA/IP ratings)
NEMA 12 / IP 52
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Compact PLC Splitter
PLC Splitter Specifications
Offers compact PLC splitter with thirty-two 2.0 mm output legs and one 2.0
mm input leg. This product is unique due to its extremely compact size,
perhaps one of the smallest in the industry, and the factory terminated
configuration provides superior optical performance (17.2 dB max insertion loss).
1×32 PLC splitter
39
Maximum insertion loss (dB)
17.2
Return loss (dB)
55 (Typical)
Equipped with SCA terminations.
1
2
3
4
29
30
31
32
Indoor (V-Linx)
MDU
NO.2
V-Linx Combiner
The V-Linx Combiner aggregates the optical paths from up to six VLinx terminals (up to 72 individual units). Using the same compact
chassis as the V-Linx terminal, the V-Linx Combiner is configured
with preterminated AccuFlex PLUS Optical ribbon interconnect
cable assemblies in the factory for quick set up and installation in
the field (supporting 1335 N of axial load). The cable provides excellent transmission performance, flexibility, and connectivity in a very
small package (8.4 mm diameter). The V-Linx Combiner provides all
the necessary assistance to allow a single person to install the entire
cable between floors. It uses multifiber push-on (MPO) connector
technology which enables a very compact aggregation point from
multiple V-Linx Terminals.
Features and Benefits
V-Linx Cable
Closure/Cabinet/Splitter
● Compact size
● Supports aggregation of up to 72 units (60 units most common)
● Uses multi-fiber connector interface
● Integrated with V-Linx cables at the factory
● Field integration of V-Linx cables optional
Optical Performance
Capable of serving up to 72 units, the V-Linx cable is configured with up to
six, 12-fiber ribbon cables, and connects the Fiber Distribution Hub (FDH)
to the V-Linx Combiner. The V-Linx cable is a riser rated AccuFlex PLUS
Optical ribbon interconnect cable (supporting 1335N of axial load) which
provides excellent transmission performance, flexibility and connectivity in
a very small package (8.4 mm diameter).
The V-Linx cable can be configured at the factory with MPO connectors on
one or both ends of the cable assembly.
Maximum insertion loss (dB)
1.25
Return loss (dB)
55 (Typical)
Specification
Item
Specification
Dimension (W x H x D mm)
190×222×114
Weight (kg)
3.7
Shipping size (mm)
228×202×127
Shipping weight (kg)
3.7
Master pack count
1 per box
Pallet count (# Master, Total #)
36 per pallet
Number of terminations (Common)
5 MPO connectors (12-fiber per connector)
Wall mountable
All surfaces
Color
Central office white
Fire rating of plastics
UL-94, rated V-0
In use temperature rating (°C)
-5 to +50
Storage temperature rating (°C)
-20 to +70
Water rating (NEMA/IP ratings)
NEMA 12/IP 52
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
40
MDU
NO.3
Indoor (V-Linx)
V-Linx Terminal
Closure/Cabinet/Splitter
The V-Linx Terminal is a comprehensive, multifunctional 12-port terminal
system that combines fiber storage and a hands-free payoff feature in a
single factory-terminated device.
The input cable for the V-Linx Terminal is a 15.24 m twelve-fiber preterminated drop cable installed at the factory. The drop cables are terminated
with Multifiber Push On (MPO) connectors providing the interface with the
V-Linx Combiner for a collective floor distribution design within a building.
The distribution side of the V-Linx Terminal provides transition to twelve
single-fiber SCA adapters allowing individual drops to 12 living units.
The V-Linx Terminal features OFS’ bend-optimized AllWave FLEX ZWP
Fiber enabling superior optical performance within the terminal and the
integrated cable tether.
The cable spool is integrated on the assembly itself for quick set-up and
installation in the field. The V-Linx Installation Tool provides all the necessary assistance to allow a single person to install the entire cable between
floors.
Features and Benefits
●Hands-free fiber pay-off operation
●Integrated spool axle for fiber storage
●Spool and Play functionality from the factory
●15 m of integrated cable (a larger V-Linx Terminal is available for 90 m applications)
●Parking adapters for units not in service
●Wall mountable onto multiple surfaces
●Highly compact design
●AllWave FLEX ZWP Fiber enabled design
●Under area splice cable
Specification
Item
Specification
Dimension (W x H x D mm)
190×222×114
Weight (g)
550
Shipping size (W×H×D mm)
228×202×127
Shipping weight (g)
750
Master pack count
5 per box
Pallet count (# Master, Total #)
80 per pallet
Number of terminations
12
Wall mountable
All surfaces
Color
Central office white
Flame retardance
UL-94, V-0
In use temperature rating (°C)
-5 to +50
Storage temperature rating (°C)
-20 to +70
Water rating (NEMA/IP ratings)
NEMA 12/IP 52
Note:Dimensions shown are for
the standard V-Linx Terminal.
The larger V-Linx Terminal
dimensions are:
253 x 202 x 119 (mm)
Optical Performance
Maximum insertion loss (dB)
1.25
Return loss (dB)
55 (Typical)
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
41
Indoor
MDU
Termination
Termination Box – J420, J422
Indoor type splicing box for MDU
(Multi Dwelling Unit) application.
J420-SS/J420-S/J420-M
J422-SS/J422-S/J422-M
Features and Benefits
● Wide product range for various type of MDU
● J420 series: Suitable for MDU application with fusion splice
● J422 series: Suitable for MDU application with SC connector
● Easy to re-wire by adopting SC connector
Specification
Specification
Product No.
J420-SS
J420-S
J420-M
J422-SS
J422-S
J422-M
326×218×63 440×390×100 440×850×100 326×218×63 440×390×100 440×850×100
Dimension (W×H×D mm)
Weight (kg)
2
5
11
Flame retardance
UL94, V-0
Mount condition
Indoor wall mount type
Cable entry position
Bottom
Cable entry
Max. cable
count
Closure/Cabinet/Splitter
Item
3
2
8.5
5
UL94, V-0
Indoor wall mount type
Bottom
6
6
3
Top and Bottom
Top: 1
Bottom: 6
Top: 1
Bottom: 6
Optical cable
(~Φ 23mm)
1 per cable entry
1 per cable entry
Drop cable or
Indoor cable
6 per cable entry
6 per cable entry
Max. single fiber fusion splice
count
8
40
120
—
—
—
Max. SC connector joint count
—
—
—
8
40
120
Applicable splitter
1×4
1×4
1×8
1×16
1×32
1×4
1×8
1×16
1×32
1×4
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Wiring Diagram
SC connector
SC adaptor
Fusion splice
Optical
fiber cable
J420
Optical fiber cable
Drop cable or
indoor cable
Optical
fiber cable
Optical fiber cable
Drop cable or
indoor cable
J422
42
Indoor
MDU
Termination
Termination Box – J421
Indoor type splicing box for MDU
(Multi Dwelling Unit) application.
J421-SS/S/M/L
Features and Benefits
● Wide product range offer for various type of MDU
● Suitable for MDU application with SC connector
● Suitable for installing slotted core cable (4-fiber ribbon)
● Easy to re-wire by adopting SC connector
Specification
Closure/Cabinet/Splitter
Item
Specification
Product No.
J421-SS
J421-S
J421-M
J421-L
Dimension (W×H×D mm)
326×218×63
440×390×100
440×850×100
470×1500×140
Weight (kg)
2
5
11
35
Flame retardance
UL94, V-0
Mount condition
Indoor wall mount type
Cable entry position
Bottom
Cable entry
Max. cable
count
2
Top and Bottom
6
Optical cable
(~Φ 23mm)
1 per cable entry
Drop cable or
Indoor cable
6 per cable entry
6
Top: 6
Bottom: 6
Cable in
Max. 4-fiber ribbon
fusion splice count
2
10
30
50
Cable out
Max. single fiber
fusion splice count
8
40
120
200
Max. SC connector joint count
8
40
120
200
Applicable splitter
1×4
1×4
1×8
1×16
1×32
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Wiring Diagram
Fiber ribbon
exchange module
SC connector
SC adaptor
Fusion splice
Optical
fiber cable
43
Optical fiber cable
Drop cable or
indoor cable
Indoor
MDU
Termination
Termination Box – E Cabinet-SS
Indoor type splicing box for MDU
(Multi Dwelling Unit) application.
Features and Benefits
● Able to install various modules into the cabinet depending on usage
● Easy to re-wire by adopting SC connector
● Max. connector counts: 16 SC connector joints
Specification
Specification
Product No.
E Cabinet-SS
Dimension (W x H x D mm)
326×218×63
Weight (kg)
Closure/Cabinet/Splitter
Item
2
Flame retardance
UL94, V-0
Mount condition
Indoor wall mount
Cable entry
Bottom
Cable in
Max. cable count
Cable out
Optical cable (~Φ 13.5mm): 1 or
4-fiber drop cable: 1
Drop cable or indoor cable: 16
Max. 4-fiber ribbon fusion splice
count
Cable in
1
Max. SC connector joint count
Cable out
16
Applicable splitter mudule
1x4, 1x8
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Wiring Diagram
Fusion splice
SC adaptor
SC connector
Fiber ribbon
exchange
module or
Splitter module
Round Cable or
4 fiber drop cable
Drop cable or
Indoor cable
44
Indoor
Outdoor
Indoor
MDU
Termination
Termination Box – J423H-SS, S-SS
Small indoor splicing box type designed
for MDU network deployment.
Drop cable and indoor cable with 1×4 or
1×8 splitter (optional) is spliced inside
the box.
J423H-SS
J423S-SS
Features and Benefits
● For small MDU
● Wall mount type
● Light weight
● Max. fusion splice: 8-fibers
Closure/Cabinet/Splitter
Specification
Item
Specification
Product No.
Dimension (W×H×D mm)
J423H-SS
J423S-SS
156×151×69
150×145×38.5
Weight (kg)
0.3
Flame retardance
UL94, V-0
UL94, V-0 *1
Mount condition
Indoor/outdoor wall mount type
Indoor wall mount type
IPX3
—
Water proof
Cable entry position
Top, Bottom, Right
Main cable: 2 (cable width: 2mm)
Drop cable / indoor cable: 8
Cable entry
Max. cable
count
Main cable
1 per cable entry
Drop cable or Indoor cable
1 per cable entry
Max. single fiber fusion splice count
8
1×4, 1×8
Applicable splitter
*1Except for plastic cover
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Wiring Diagram
Fusion splice
Drop cable or
indoor cable
45
Drop cable or
indoor cable
MDU
Indoor
Outdoor
Splitter Module
Splitter modules for Indoor or
Outdoor use.
Both type of modules are suitable for MDU application. SC
connector interface of the
modules allows quick installation.
Outdoor type is applicable on
external wall of small apartment.
1×4
1×8
Splitter Module (indoor type)
Closure/Cabinet/Splitter
1×4
1×8
Splitter Module WM (indoor/outdoor type)
Features and Benefits
Splitter Module (indoor type)
Splitter Module WM (indoor/outdoor type)
●Indoor wall mount type
●Ultra small and light weight
●Easy access with SC connectors
●Mounting direction is changeable depending
on situations
●Easy fixing on a steel cabinet with magnets
●Suitable for small size apartment
●Attachable on external wall of apartment
●Small and light weight
●Easy access with SC connectors
●Water proof of IPX3
Specification
Item
Product No.
Dimension (W×H×D mm )
Specification
Splitter Module-4
Splitter Module-8
94×29×57
102×29×77
Weight (kg)
Splitter Module
WM-8
156×151×69
0.2
0.5
Flame retardance
UL94, V-0
Mount condition
Indoor wall mount type
Indoor/outdoor wall mount type
—
IPX3
Water proof
Insertion loss (dB)
Splitter Module
WM-4
*1
Connector type
≤ 8.9
≤ 12.4
≤ 8.9
≤ 12.4
SC
*1Including insertion loss of connectors
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
46
MDU/SFU
Indoor
Outdoor
Splicing Box
– J417, J418
Demarcation point
J417
The small splicing box for Single Family
Indoor
Unit (SFU).
Rosette
J418
Closure/Cabinet/Splitter
Features and Benefits
J417
J418
● Outdoor application: IPX3 (IEC60529)
● Wall mount type
● Compact size: W115×H200×D30 mm
● Light weight by plastic body and cover
● SC connector termination is available (optional)
● Max. fusion splice: 4-fibers
● Indoor application (Flame retardant material)
● Wall mount type
● Compact size: W120×H115×D16 mm
● Light weight by plastic body and cover
● Max. fusion splice: 4-fibers
Specification
Item
Specification
Product No.
Dimension (W×H×D mm)
Weight (kg)
J417
J418
115×200×30
120×115×16
0.2
0.1
Flame retardance
Cover: UL94, V-2
Main body: UL94, HB
Cable clamp: UL94, V-0
Cover: UL94, HB
Main body: UL94, HB
Cable clamp: UL94, V-0
Mount condition
Indoor/outdoor wall mount type
Indoor wall mount type
IPX3
—
Bottom: 2
Bottom: 2, Top: 1
Water proof
Cable entry position
Max. cable
count
Drop cable or Indoor cable
4 per cable entry
Optical cord (ф 2 mm)
2 per cable entry
Max. single fiber fusion splice count
4
Max. SC connector joint count
2
—
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Wiring Diagram
Drop cable
Fusion splice
Drop cable
Indoor cable or
optical cord
J417
47
Drop cable
SC connector
SC adaptor
Fusion splice
Indoor cable or
optical cord
Fusion splice
Drop cable
Indoor cable or
optical cord
J418
Indoor
MDU/SFU
Outdoor
Splicing Box – J425, J426
Demarcation point
J425 joint box is designed for outdoor/indoor use Single
Family Unit (SFU) application with SC connectorized drop
or indoor cable termination. J426 joint box is also designed
for outdoor/indoor use SFU application with fusion splice or
SC connector termination. The cable shall use bend insensitive fiber (R15).
J425
J426
Features and Benefits
J426
● Outdoor application: IPX3 (IEC60529)
● Wall mount type
● Compact size: W65×H155×D26 mm
● Light weight by plastic body and cover
● SC connector termination (Max. 1 connector)
● Fusion splice: Max. 2-fibers
● For bend insensitive (R15) fiber
● Box color: Ivory, Brown, Grey
Closure/Cabinet/Splitter
J425
● Outdoor application: IPX3 (IEC60529)
● Wall mount type
● Compact size: W77×H183×D37 mm
● Light weight by plastic body and cover
● SC connectorized drop or indoor cable
termination (Max. 2 connectors) or KANTAN SC
● For bend insensitive (R15) fiber
an be used indoor (Flame retardant material)
●C
● Both outdoor/indoor use
Specification
Item
Specification
Product No.
Dimension (W×H×D mm)
Weight (kg)
Flame retardance
J425
J426
77×183×37
65×155×26
0.2
0.1
UL94, V-0
UL94, HB
Mount condition
Indoor/outdoor wall mount type
Water proof
IPX3
Cable entry position
Max. cable
count
Bottom: 2
Drop cable or Indoor cable
2 per cable entry
Max. single fiber fusion splice count
—
2
Max. SC connector count
2
—
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Wiring Diagram
SC connector
SC adaptor
Drop cable
Indoor cable
J425
Fusion splice
Drop cable
Indoor cable
J426
48
MDU/SFU
Indoor
Optical Connector Rosette
for F T T x Network – J428N
J428N rosette is designed for termination of drop or
indoor cable with KANTAN SC Connector (Field installable connector).
J428N
Features and Benefits
Closure/Cabinet/Splitter
● Wall mounted indoor type
● Small size : W50 x H100 x D17 mm
● Allow drop / indoor cable entry from 4 directions
● For bend insensitive (R15) fiber
● Kantan SC connector termination (Max. 1 connector)
● SC adaptor with shutter
Specification
Item
Specification
Product No.
J428N
Dimension (W×H×D mm)
50×100×17
Weight (kg)
0.1
Flame retardance
UL94, V-0
Mount condition
Indoor wall mount type
Cable entry position
Top, Bottom, Right, Left
Max. cable count
Drop cable or Indoor cable
1 per cable entry
Max. SC connector joint count
1
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Wiring Diagram
Drop / Indoor Cable
SC connector
SC adaptor
49
Rosette
Compact PLC Splitter
PS202-1xN and 2xN
PS202 is the compact 1xN and 2xN optical splitter using
PLC (Planar Lightwave Circuit) and suitable for installation
in optical equipments. PS202 is the best choice for constructing passive optical networks.
● Video signals distribution in optical CATV
● Usable for PON (Passive Optical Network)
● Signal-distribution using optical AMP
Features and Benefits
●Low insertion loss
●C ompact packaging size. Suitable for installation in a
splicing closure
●High reliability (Telcordia GR-1209, GR-1221 qualified)
Ordering Information
Specification
Item
Specification
Operating wavelength (nm)
Configuration
1260 to 1360/1480 to 1580
1×16
1×32
2×4
2×8
≤ 14.5
≤ 17.8
≤ 7.8
≤ 11.2
≤ 1.5
≤ 2.0
≤ 1.2
≤ 1.5
Insertion loss (dB)
Uniformity (dB)
Dimension (WxDxL mm)
PDL (dB p-p)
1×4
≤ 7.8
≤ 1.0
1×8
≤ 11.0
≤ 1.0
4×4×40
4×4×40
Directivity (dB)
Return loss (dB)
Operating temperature (˚C)
Fiber length (m)
5×4×50
7×4×50 4×4×50
≤ 0.3
4×4×50
PS2022×16
≤ 14.5
≤ 2.0
2×32
≤ 17.8
≤ 2.0
5×4×60
7×4×60
Configuration
1×4
1×8
1×16
1×32
2×4
2×8
2×16
2×32
≥ 50
≥ 50
-40 to +75
≥2
* Not including connectors in all specifications
* Available connector upon customer request
Closure/Cabinet/Splitter
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Compact PLC Splitter
PS202-2×1×8
PS202-2×1×8 is the compact size optical splitter, which is
capable to distribute a pair of video and data signals.
This product is preferable for the construction of PON (Passive Optical Network), and it realizes easier installation and
higher-density packaging in a closure.
Features and Benefits
Specification
Installation
Item
Configuration
Operating wavelength (nm)
Insertion loss (dB)
Uniformity (dB)
PDL (dB)
Directivity (dB)
Return loss (dB)
Operating temperature (˚C)
Storage temperature (˚C)
Dimensions (W×D×L mm)
Specification
2×(1×8)
1260 to 1360/1480 to 1580
≤ 11.0
≤ 1.0
≤ 0.3
≥ 50
≥ 50
-40 to +75
-40 to +85
6×4×40
* Not including connectors in all specifications
* Available connector upon customer request
*This is typical specification. Furukawa Electric reserves the right to improve, enhance and
modify the specification of these products without prior notification.
● Efficient for installation in a splicing closure
● Compact size (Same as 1×8 splitter in dimensions of
package)
● High reliability
2-fiber ribbon
Fusion
splice
×
Input
Fusion splice
2-fiber ribbon
Data signal
×
Video signal
2×1×8 splitter
Output
2-fiber drop cable
×
×
×
×
×
×
×
for user
50
Optical Connector and Tools
High reliable optical connector offered by Furukawa Electric allows using inside the closure, optical
termination box, demarcation point, and rosette. One of the Furukawa’s innovative optical connector called “KANTAN SC” (field installable connector) with associated tools enables quick assembly
with drop cable, indoor cable, and low friction cable at various places.
Closure
KANTAN SC
Demarcation point
ONU
KANTAN SC
Rosette
■Connector
Application
Product name
Picture
Page
KANTAN SC
for Cable
52
KANTAN SC
for Fiber
53
Single-mode Fiber Connector
Patch Cord
55
Indoor
Outdoor
Optical Connector and Tools
Closure
Box (Demarcation point, Rosette, ONU)
Indoor
Box (Rosette, ONU)
■Mechanical Splice
Application
Indoor
Outdoor
Product name
Picture
Mechanical Splice for Drop Cable
Page
54
■Tools
Application
51
Product name
Type
Picture
Page
KANTAN SC for Cable
FA-503
Fiber coating
stripper
56
KANTAN SC for Fiber
S210
Fiber coating
stripper
56
KANTAN SC
S326A
Fiber cleaver
57
KANTAN SC
S218R
Fiber coating
thermal stripper
57
Indoor
Outdoor
Field Installable Connector
KANTAN SC Connector (for Drop/Indoor Cable)
KANTAN SC Connector enables
quick and easy connector assembly
onto Drop/Indoor Cable at the field.
It needs only common tools and/or
equipment.
Features and Benefits
● Quick and easy assembly time
● No polishing or no epoxy required
● Fully compatible with standard SC connector
● Low insertion loss
Assembly Process
1. Insert the fiber into the plug
2. Remove wedge
Tools for Assembly (Optional)
Item
Applicable cable diameter (mm)
Optical Connector and Tools
Specification
3. Close cover
Specification
3.1 x 2.0 (Drop/Indoor cable)
2.0 x 1.6 (Low friction indoor cable)
Polishing type
SPC polish, APC polish
Insertion loss (dB)
≤ 0.5 (SPC polish), ≤ 0.6 (APC polish)
Return loss (dB)
≥ 40 (SPC polish), ≥ 50 (APC polish)
Operating temperature (˚C)
- 40 ~ +75
Fiber cleaver S326A
*This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify
the specification of these products without prior notification.
Ordering Information
Type
Product Code
SPC polish, Drop/Indoor Cable
KSC/SPC-F-SM-I20
SPC polish, Micro Indoor Cable
KSC/SPC-F-SM-I16
APC polish, Drop/Indoor Cable
KSC/APC-F-SM-I20
APC polish, Micro Indoor Cable
KSC/APC-F-SM-I16
Fiber coating stripper FA-503
Cable holder FA-501B
52
Indoor
Outdoor
Field Installable Connector
KANTAN SC Connector (for 0.25mm fiber)
KANTAN SC Connector enables
quick and easy connector assembly
at the field. It needs only common
tools and/or equipments.
Features and Benefits
● Quick and easy assembly time
● No polishing or no epoxy required
● Fully compatible with standard SC connector
● Low insertion loss
Assembly Process
Optical Connector and Tools
1. Insert the fiber into the plug
2. Remove wedge
Specification
Tools for Assembly (Optional)
Item
Applicable fiber
3. Attach boot
Specification
Single Optical fiber
(ITU-T G.652.B, G.652.D, G.657.A)
Applicable fiber diameter (µm)
250 ± 15
Polishing type
SPC polish, APC polish
Insertion loss (dB)
≤ 0.5 (SPC polish), ≤ 0.6 (APC polish)
Return loss (dB)
≥ 40 (SPC polish), ≥ 50 (APC polish)
Operating temperature (˚C)
- 40 ~ +75
Fiber cleaver S326A
*This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify
the specification of these products without prior notification.
Ordering Information
Item
53
Product Code
SPC polish, 250µm fiber
KSC/SPC-F-SM-250
APC polish, 250µm fiber
KSC/APC-F-SM-250
Fiber coating stripper S210
Indoor
Mechanical Splice
for Drop Cable
Outdoor
Mechanical splice for Drop / Indoor cable splicing.
Based on our reliable mechanical splice technology, it allows easy and quick cable splicing without power supply. It is suitable for repairing broken
Drop / Indoor cables especially.
Features and Benefits
● Quick and easy assembly
● Cable splicing with NO power supply
● Rigid cover allows quick protection of cable splicing
Assembly Process
1. Setting and holding cables
2. Removing wedge to fix fibers
Item
Applicable cable diameter (mm)
Insertion loss (dB)
Return loss (dB)
Operating temperature (˚C)
Dimension (W×D×H mm)
Optical Connector and Tools
Specification
3. Installing cover for protection
Tools for Assembly (Optional)
Specification
3.1 x 2.0 (Drop/Indoor cable)
2.0 x 1.6 (Low friction indoor cable)
≤ 0.4
≥ 40
- 40 ~ +70
100 × 8.2 × 8.2
Fiber cleaver S326A
*This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify
the specification of these products without prior notification.
Fiber coating stripper FA-503
Cable holder FA-501B
54
G.652. D
Single-mode Fiber Connector
Patch Cord
G.657. A1
G.657. A2
Furukawa Electric offers wide range of single-mode fiber patch cords with various polish type for
many applications.
Specification
Applicable cord type
Connector
Polish
PC
≥ 25
SC
SPC
≥ 40
φ 1.5
APC
Optical Connector and Tools
PC
FC
φ 1.7
φ 2.0
Insertion loss (dB)
Return loss (dB)
≤ 0.5
≥ 25
SPC
≥ 40
APC
≥ 60
*Measured at 1310, 1550 nm wavelength
*This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
55
≥ 60
Optical Fiber Stripper
with Plastic Blades FA-503
Fiber stripper FA-503 is a new type of stripper which has
plastic blades. It allows easy maintenance.
Features and Benefits
●Plastic blades adopted
●Rust free and easy maintenance
●Easy to exchange blades
●Available for field installable connector as well as
fusion splicing and mechanical splicing
Specification
Item
Specification
Applicable fiber
Single fiber with UV curable acrylate coating
Nominal 125 *1
Cladding diameter (µm)
Coating diameter (µm)
Nominal 250
Over 1600 times of stripping per a pair of blades (typical)*2
Durability
Dimensions / Weight
21 W x 154 D x 57 H mm / 30 g
*1For other diameter, please contact us.
*2In case of stripping Furukawa’s standard fiber
*This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Product Code
Product Code2 pa
Description
Main body : 1 pc, Plastic blade : 12 pcs (6 pairs)
FA-503-kit B
Main body : 1 pc, Plastic blade : 4 pcs (2 pairs)
FA-503-blade
Plastic blade : 12 pcs (6 pairs)
Optical Connector and Tools
FA-503-kit A
Single Fiber Stripper
S210
The FITEL S210 Single Fiber Stripper is designed to strip 250 µm
as well as 900 µm diameter fiber. This easy to use stripper has a
20 mm wide base with the blade located in the center to ensure
safe longitudinal stripping.
Specification
Item
Applicable fiber
Cladding diameter (µm)
Coating diameter (µm)
Dimensions / Weight
Specification
Single glass-based optical fiber
125
250 to 900
20 W × 80 D × 26 H mm / 70g
*This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
56
High Precision Cleaver
S326A
With its ergonomic and light weight design, the S326A cleaver offers
the operator the versatility to cleave on a work bench or in the palm
of their hand. Just pressing the lever completes the fiber cleave and
automatically collects the waste. The S326A cleaver can offer optical
fiber cleaving for a full range of OSP and OEM applications.
Features and Benefits
● Cleave anywhere
● Simple operation
● Operation on hand
● Easy fiber loading
● Durable and reliable design
● Wide lid opening
● Light weight (About 30% reduced from previous model)
Specification
Item
Fiber types
Fiber count
Cladding diameter (µm)
Coating diameter (µm)
Cleave length (mm)
Blade life*1
Dimensions (W×D×H mm)
Weight (g)
Specification
Operation on hand
All fiber types
Single to 12 ribbon fiber
125
Single: 250 to 900
Ribbon fiber: 280 to 400 (thickness)
Single fiber: Fixed length 10 & 16, Variable length 5 to 20
Ribbon Fiber: Fixed length 10
48000 fibers (2000 fibers × 24positions)
96 × 79 × 56
250
Wide lid opening
Optical Connector and Tools
*1The blade life depends on the operation environment and condition. The number can vary and is not guaranteed.
*This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Thermal Stripper
S218R
Features and Benefits
● Exceptional stripping for single and ribbon fiber
● Simple operation via built-in battery or AC power
● Durable design
● Easy maintenance on-Site
Specification
Item
Fiber types
Cladding diameter (µm)
Coating diameter (µm)
Power source (V)
Battery running time (hrs.)
Charge time (hrs.)
Operating environment
Dimensions / Weight
57
Specification
All fiber types, single to 12 ribbon fiber
125
Single: 250 to 400
Ribbon fiber: 300 to 400 (thickness)
DC 11 to 14 / AC 100 to 240
Approximately 10
Approximately 2.5
Temperature: 0 to 40˚C
Humidity: Below 95%
125 W × 48 D × 41 H mm / 260g
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Optical Connector and Tools
58
Hand-Held Fusion Splicer
S123C/M4 ver.2
With its low profile and IP-52 rated super rugged body, the
FITEL S123 series fusion splicer offers speedy operation
at every splicing field, FTTx, LAN, backbone or long-haul
installations. Large battery capacity makes it possible to
perform 70 cycles of splicing and heating, while it offers
SOC solution as well. Combining the portability, power
flexibility and field ruggedness, S123 delivers the fast and
consistent splicing with outstanding mobility and extreme
ease-of-use.
Features and Benefits
S123C/M4 passed criteria as below
● Drop resistance: 76 cm drops from 5 different angles
● Water resistance: IPX2 rating drip proof
● Dust resistance: IP5X rating dust proof
Specification
Items
S123C
S123M4
SM (ITU-T G.652), MM (ITU-T G.651), DSF (ITU-T G.653), NZD (ITU-T G.655),
BIF/UBIF (Bend insensitive fiber, ITU-T G.657)
Applicable fibers
Cladding diameter (μm)
Coating diameter (μm): single fiber
: ribbon fiber
Fibers cleave length (mm)
125
250 to 900
250 to 900
—
280 to 400
5~10
Average splice loss (dB)
Splice time (seconds) : single fiber
13
13
—
15
: ribbon fiber
Heat time (seconds)
25 (S922: 40 mm sleeve, S921: 60 mm sleeve) (Pre-heat mode)
35 (S924: 40 mm sleeve) (Pre-heat mode)
Splice programs
Max. 150
Heat programs
Max. 18
Automatic heating start
Available
Applicable sleeves (mm)
Fiber holding
20/40/60
Tight holder (Loose tube applicable) or Fiber holder system (S123C)
Fiber holder system (S123M4)
Tension test (N)
Fiber image magnification
Splice memory
Tools
10
SM: 0.05, MM: 0.03, DSF: 0.08, NZD: 0.08
Image capture capacity
Dimension (W×D×H mm)
Weight (kg)
Monitor
Data output
Battery capacity
Wind protection (m/s)
Operating temperature (°C)
Storage temperature (°C)
Power source (V)
1.96
58X
48X
Max. 1500
Last 100 images to be automatically captured + up to 24 images to be stored permanently
127×199×81 (Not including shock absorber)
159×231×104 (Including shock absorber)
1.4 (Without battery)
1.6 (With S943B battery)
3.5” color LCD monitor
USB ver.2.0 mini
Typical 70 splice/heat cycles with S943B battery*
Max. wind velocity of 15
-10 to +50 (Without excessive humidity)
-40 to +60 (Without excessive humidity)
AC Input 90 to 265 (50/60 Hz), DC Input 11 to 17
*The number of the splicing and heating the machine can produce using a fully charged brand new battery at room temperature of 20°C,semi-auto
mode for splicing and regular mode for heating. Depending on the condition of the batteries and operation environment, the number can vary.
59
*This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior
notification.
Related Tool
S42X Fusion Splicer Tool Kits
The S42X Series Fusion Splicer Tool Kits contain all of the
necessary tools required for optical fusion splicing in a
rugged carrying case. The durable carrying case features
separate compartments for organizing tools and consumables.
Description
Model
S423
S424
✓
✓
✓
✓
S210 Single Fiber Stripper
Carrying case
✓
✓
250cc Polyethylene bottle with siphon
✓
✓
Cleaning cotton for optical fiber
✓
✓
Cotton stick for cleaning V-groove, lens, mirror
✓
✓
Blower brush for cleaning V-groove, lens, mirror
✓
✓
Precision screw driver set and hexagonal wrench set
✓
✓
Electrode sharpener
✓
✓
S310 Single Fiber Cleaver
Qty
S422
✓
S326A Hand-Held High Precision Cleaver
S218R Thermal Stripper
✓
✓
✓
✓
✓
✓
✓
✓
✓
1
1
1
1
1
1
1
1
2
1
1
1
*This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification
of these products without prior notification.
Protection Sleeves
FITEL offers a wide variety of protection sleeves to accommodate single and ribbon fiber. FITEL’s protection
sleeves come in ribbon, standard, slim, mini, and
macro sizes. They are composed of an outer an inner sleeve reinforced by an internal member made of
stainless steel or ceramics.
Model, Specification and Applicable Fiber
Model
Applicable fiber
Material of strength member
Pieces / pack
S921
60
Stainless steel
25
S921DC
Drop/Indoor cable
60
Stainless steel
25
S922
Single fiber, 0.25-0.9 mm
coating diameter
40
Stainless steel
25
S924
Single fiber and up to
8-fiber ribbon
40
Quartz
25
S927A
Single fiber and up to
8-fiber ribbon
40
Ceramic
100
S927B
Single fiber and up to
12-fiber ribbon
40
Ceramic
100
S928A-20
Single fiber 0.25-0.4 mm
coating diameter
20
Stainless steel
100
S928A-25
25
Stainless steel
100
S928A-35
35
Stainless steel
100
Tools
Length (mm)
Single fiber, 0.25-0.9 mm
coating diameter
*This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products
without prior notification.
60
Drop Cable splicing
Drop cable splicing is available on FITEL fusion
splicer by using optional equipment.
Features and Benefits
● Available for Drop cable splicing
● Simple operation
● No splicer modification necessary
Applicable Fusion Splicer
Item
Specification
Applicable fusion splicer
S123C/M4
Specification
Item
Specification
Single and 2-ribbon drop cable (3.1 x 2.0)
Low-friction Indoor cable (2.0 x 1.6)
Applicable cable diameter (mm)
Splice Time
Single: 13 seconds, 2-ribbon: 15 seconds
Heat Time
180 seconds ( Heating: 90 seconds, Cooling: 90 seconds)
Battery Capacity
S123C/M4: 40 splice/heat cycles
*This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Components
Tools
Item
61
Product Number
Quantity
Fiber holder for Drop cable/ Indoor cable
S712S-1SM-D
1
Fiber holder for Low-friction indoor cable
S712S-1SM-ST
1
Fiber holder for 2-riboon fiber cable
S712A-2SM-D
1
Transporter
TRP-03
1
Protection Sleeve
S921DC
1pack (25pieces)
Optical Identifier
ID-L, ID-H/R v2
ID-L is a hand held light source used for the field.
It features light weight design for easy handling
and operates more than 60 hours at the field.
ID-H/R v2 is a rugged, user-friendly tool which
identifies optical fibers by detecting the optical signals passing through the fiber utilizing local detection technology.
ID-L
ID-H/R v2
Features and Benefits
ID-L
● 4 wavelength lineup
● Lightweight design for easy handling
● Operate more than 60 hours on battery
ID-H/R v2
● Wide dynamic range
● Detects the signal without disrupting traffic
● Detects the tone signal and traffic signal
● Light weight design for easy handling
Instruction
ID-H/R (Optical fiber identifier) detects tone signal from ID-L (Hand held light source) to identify a
target fiber.
Distribution
frame
Transmission
apparatus
Live fiber
Closure
Tools
Optical fiber
cable
Direction of signal
Dark
fiber
Light source
ID-L
ID-H/R v2
ID-H/R v2
62
http://www.furukawa.co.jp/jyotsutop/english/
HEAD OFFICE
Marunouchi Nakadori Bldg., 2-3, Marunouchi 2-chome, Chiyoda-ku, Tokyo 100-8322, Japan
Tel: +81-3-3286-3245 Fax: +81-3-3286-3978
Contact Form: https://www.furukawa.co.jp/cgi-bin/inquiry.cgi?id=fttx_en
http://www.furukawa.co.jp/english/
OFS FITEL, LLC (OFS)
2000 Northeast Expressway Norcross, Georgia 30071, U.S.A.
Tel: 1-770-798-2200
E-mail: [email protected]
http://www.ofsoptics.com/index.php/
FURUKAWA ELECTRIC EUROPE LTD. (FEEL)
3rd Floor Newcombe House, 43-45 Notting Hill Gate, London W11 3FE, United Kingdom
Tel: +44-20-7313-5300 Fax: +44-20-7313-5310
Contact Form: http://www.furukawa.co.uk/contactus.php
http://www.furukawa.co.uk/
Furukawa Electric Singapore Pte. Ltd. (FES)
60 Albert Street, #13-10 OG Albert Complex, Singapore 189969
Tel: +65-6224-4686 Fax: +65-6336-2635
Furukawa Shanghai, Ltd. (FSL)
Room1006, Hongyi Plaza, 288 Jiujiang Road, Shanghai 200001, P.R.China
Tel: +86-21-3366-5301 Fax: +86-21-3366-5315
E-mail: [email protected]
http://www.furukawa-sh.cn/
Furukawa Electric Hong Kong Ltd. (FEHK)
Suite 1810, 18/F, Tower 2, 33 Canton Road, China Hong Kong City, Tsim Sha Tsui, Kowloon, Hong Kong
Tel: +852-2512-8938 Fax: +852-2512-9717
http://www.fehk.com.hk/
Furukawa Electric Trading SZ Ltd.
Room 4801, Block A, United Plaza, No.5022 Bin He Road, Futian District Shenzhen 518033 P.R.China
Tel: +86-755-8373-4878 Fax: +86-755-8373-4829
http://www.fehk.com.hk/
• The products and their appearances, as described in this brochure, are subject to change for improvement without prior notice.
• Company and product names appearing in this brochure are registered trademarks or trademarks of respective companies.
Export Control Regulations
The products and/or technical information presented in this publication may be subject to the application of the Foreign Exchange and Foreign Trade Act and
other related laws and regulations in Japan.
In addition, the Export Administration Regulations (EAR) of the United States may be applicable.
In cases where exporting or reexporting the products and/or technical information presented in this publication, customers are requested to follow the
necessary procedures at their own responsibility and cost.
Please contact the Ministry of Economy, Trade and Industry of Japan or the Department of Commerce of the United States for details about procedures.
This catalogue is printed using environmentally friendly paper and ink.
JE-210 2F7 TR 50