CF
4
EF
2
SV9-10-A
- Solenoid
Valve
1
LS 5
PFRS-XX
4-way, 3-position spool type solenoid valve
Up to 19 L/min (5 USgpm) • 210 bar (3000 psi)
3 P
4
2
S1
In the de-energized position,
SV9-8A
this valve
allows flow from
port 3 to port 1 and blocks
ports 2 and 4. When solenoid
1 (S1) is energized, flow is
directed from port 3 to port 2
and from port 4 to port 1.
1
3
S1
4
2
Performance Data
SV9-8B
"S1"
1
3
2
4
"S2"
S1
When solenoid 2 (S2) is
energized, flow is directed
from port 3 to port 4 and from
port 2 to port 1.
S2
Sectional View
S1
Operation
S2
3
1
2
4
3
1
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports)
210 bar (3000 psi)
Cartridge fatigue pressure (infinite life)
210 bar (3000 psi)
Fatigue pressure
3,000 psi per NFPA/T2-6-1 R2-2000
Rated burst pressure
(626 bar) 9090 psi per NFPA/T2-6-1 R2-2000
S2
Max flow
5 USgpm
Temperature
range
-40°
to
120°C
(-40°
to 248°F)
SV9-8E
Coil duty
Continuous from 85% to 110% of nominal voltage
Coil power
23W
CavityC-10-4
Fluids
All general purpose hydraulic fluids such as: MIL-H-5606, SAE 10, SAE 20 etc.
Filtration
Cleanliness code 18/16/13
S2
Housing material (standard)
Aluminum
Weight including
0.95Kg (2.1 lbs)
SV9-8F coil
Seal kit
889625 (Buna-N), 566080 (Viton®)
Internal leakage 246 cm3/min (15 in3/min) max. @ 210 bar (3000 psi)
Viton is a registered trademark of E.I. DuPont
Endurance tested to 1 million cycles at full rated flow and pressure.
Description
Pressure Drop
The SV9-10-A is a 4-way,
3-position, direct acting, spool
type directional
control valve.
Cartridge Only
100
A - Port 3 to port 1,
de-energized
Pressure Drop - psi
90
80
B - Port 3 to port 2,
port 3 to port 4
70
60
A
50
B
C - Port 2 to port 1,
port 4 to port 1
40
30
C
20
10
0
B-2.A
0
1
2
3
4
Flow - USgpm (105 SUS oil @ 120°F)
eaton Screw-In Cartridge Valves Data Sheets E-VLSC-MC001-E September 2011
5
An Eaton Brand
4
2
S1
S2
SV9-10-B - SolenoidSV9-8A
Valve
4-way, 3-position spool type solenoid valve
1
3
Up to 23 L/min (6 USgpm) • 210 bar (3000 psi)
S1
4
2
2
Operation
In the de-energized position,
SV9-8B
all ports
are open to each
other. When solenoid 1 (S1)
is energized, flow is directed
from port 3 to port 4 and from
port 2 to port 1.
1
3
S1
S2
4
When solenoid 2 (S2) is
energized, flow is directed
from port 3 to port 2 and from
port 4 to port 1.
S2
Sectional View
Performance Data
SV9-8E
Ratings and Specifications
S1
3
1 "S1"
2
4
"S2"
3
1
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports)
210 bar (3000 psi)
Cartridge fatigue pressure (infinite life)
210 bar (3000 psi)
Fatigue pressure
3,000 psi per NFPA/T2-6-1 R2-2000
Rated burst pressure
(626 bar) 9090 psi per NFPA/T2-6-1 R2-2000
S2
Max flow
6 USgpm
SV9-8Frange
Temperature
-40° to 120°C (-40° to 248°F)
Coil duty
Continuous from 85% to 110% of nominal voltage
Coil power
26W
CavityC-10-4
Fluids
All general purpose hydraulic fluids such as: MIL-H-5606, SAE 10, SAE 20 etc.
Filtration
Cleanliness code 18/16/13
Housing material (standard)
Aluminum
Weight including coil
0.95 Kg (2.1 lbs)
Seal kit
889625 Buna-N, 566080 (Viton®)
Internal leakage 246 cm3/min (15 in3/min) max. @ 210 bar (3000 psi)
Viton is a registered trademark of E.I. DuPont
Endurance tested to 1 million cycles at full rated flow and pressure.
Description
Pressure Drop
The SV9-10-B is a 4-way,
3-position, direct acting, spool
type directional valve.
Cartridge Only
130
A - Port 3 to port 1,
de-energized
120
110
B - Port 3 to port 2,
port 3 to port 4
Pressure Drop - psi
100
90
C - Port 4 to port 1,
port 2 to port 1,
de-energized
80
70
A
60
50
B
40
D - Port 2 to port 1
E - Port 4 to port 1
C
D
E
30
20
10
0
An Eaton Brand
0
1
2
3
4
5
Flow - USgpm (105 SUS oil @ 120°F)
6
eaton Screw-In Cartridge Valves Data Sheets E-VLSC-MC001-E September 2011
B-3.A
S1
4
2
S2
SV9-10-E - SolenoidSV9-8B
Valve
4-way, 3-position
1 spool type solenoid valve
3
Up to 23 L/min (6 USgpm) • 210 bar (3000 psi)
S1
S1
2
4
3
1
2
4
S2
Operation
In the de-energized
SV9-8E
(center) position,
all ports are
blocked. When solenoid 1 (S1)
is energized, flow is directed
from port 3 to port 4 and from
port 2 to port 1.
When solenoid 2 (S2) is
energized, flow is directed
from port 3 to port 2 and from
port 4 to port 1.
S2
Sectional View
Performance Data
SV9-8F
Ratings and Specifications
3
1
"S1"
"S2"
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports)
210 bar (3000 psi)
Cartridge fatigue pressure (infinite life)
210 bar (3000 psi)
Fatigue pressure
3,000 psi per NFPA/T2-6-1 R2-2000
Rated burst pressure
(626 bar) 9090 psi per NFPA/T2-6-1 R2-2000
Max flow
6 USsgpm
Temperature range
-40° to 120°C (-40° to 248°F)
Coil duty
Continuous from 85% to 110% of nominal voltage
Coil power
26W
CavityC-10-4
Fluids
All general purpose hydraulic fluids such as: MIL-H-5606, SAE 10, SAE 20 etc.
Filtration
Cleanliness code 18/16/13
Housing material (standard)
Aluminum
Weight including coil
0.95 Kg (2.1 lbs)
Seal kit
889625 (Buna-N), 566080 (Viton®)
Internal leakage 246 cm3/min (15 in3/min) max. @ 210 bar (3000 psi)
Viton is a registered trademark of E.I. DuPont
Endurance tested to 1 million cycles at full rated flow and pressure.
Description
Pressure Drop
The SV9-10-E is a 4-way,
3-position, direct acting, spool
type directional valve.
Cartridge Only
100
A - Port 3 to port 2,
port 3 to port 4
Pressure Drop - psi
90
80
B - Port 2 to port 1,
port 4 to port 1
70
A
60
50
B
40
30
20
10
0
B-4.A
0
1
2
3
4
5
Flow - USgpm (105 SUS oil @ 120°F)
eaton Screw-In Cartridge Valves Data Sheets E-VLSC-MC001-E September 2011
6
An Eaton Brand
S1
2
4
S2
SV9-10-F - Solenoid SV9-8E
Valve
4-way, 3-position
spool type solenoid valve
1
3
Up to 23 L/min (6 USgpm) • 210 bar (3000 psi)
S1
2
3
4
S2
Operation
In the de-energized
SV9-8F
(center) position,
port 1, port
2, and port 4 are open to
each other while port 3 is
blocked. When solenoid 1 (S1)
is energized, flow is
1
Sectional View
directed from port 3 to port
4 and from port 2 to port
1. When solenoid 2 (S2) is
energized, flow is directed
from port 3 to port 2 and from
port 4 to port 1.
Performance Data
"S1"
"S2"
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports)
210 bar (3000 psi)
Cartridge fatigue pressure (infinite life)
210 bar (3000 psi)
Fatigue pressure
3,000 psi per NFPA/T2-6-1 R2-2000
Rated burst pressure
(626 bar) 9090 psi per NFPA/T2-6-1 R2-2000
Max flow
6 USgpm
Temperature range
-40° to 120°C (-40° to 248°F)
Coil duty
Continuous from 85% to 110% of nominal voltage
Coil power
26W
CavityC-10-4
Fluids
All general purpose hydraulic fluids such as: MIL-H-5606, SAE 10, SAE 20 etc.
Filtration
Cleanliness code 18/16/13
Housing material (standard)
Aluminum
Weight including coil
0.95 Kg (2.1 lbs)
Seal kit
889625 (Buna-N), 566080 (Viton®)
Internal leakage 246 cm3/min (15 in3/min) max. @ 210 bar (3000 psi)
Viton is a registered trademark of E.I. DuPont
Endurance tested to 1 million cycles at full rated flow and pressure.
Description
Pressure Drop
The SV9-10-F is a 4-way,
3-position, direct acting, spool
type directional valve.
Cartridge Only
200
A - Port 3 to port 2,
port 3 to port 4
Pressure Drop - psi
180
B - Port 2 to port 1,
port 4 to port 1
160
140
120
100
80
60
A
40
20
0
An Eaton Brand
B
0
1
2
3
4
5
Flow - USgpm (105 SUS oil @ 120°F)
6
eaton Screw-In Cartridge Valves Data Sheets E-VLSC-MC001-E September 2011
B-5.A
4
LS 5
CF
4-way, 3-position spool type solenoid
valve
LS 5
3 P
Up to 23 L/min (6 USgpm) • 210 bar (3000
psi)
2
S1
* SV9-8A
– *
S1
2
31
23
LS 5
4
1 Function
SV9 - Solenoid valve
A
S1
2 Size
4
2
10 -10 size
3 Seal Material
Blank - Buna-N
V - Viton
5 Manual Override Option
6 Housing Material
0 - Cartridge only
A - Aluminum
S - Steel
3
1
2
4
S2
4
2
8
S2
SV9-8B
S1
2
4
S2
3
1
3
1
S2
S1
SV9-8E
4
2
3
1
3
1
SV9-8F
Aluminium
S2 S1
Light Duty
Aluminium
4
2
Fatigue Rated
Cartridge onlySV9-8E
3B
3/8” BSPP
2G
1/4” BSPP
3G
3/8” BSPP
876715
6H
SAE 4
876708
8H S1
SAE26
4
S2
SAE 6
566161
876713
6T
3
1
See section J for housings.
3
1
Housing Number
4
02-179705
9SV9-8A 10
11
12
3
876709
SV9-8F
1
S2
S2
00 - No coil
012D SV9-8E
- 12VDC
024D - 24VDC
036D - 36VDC
SV9-8B
024A - 24VAC
115A - 115VAC
230A - 230VAC
012B - 12VDC/w diode*
024B - 24VDC/w diode*
*Optional arc suppression diode.
SV9-8F
9 Connector Types 1
SV9-8E
S2
Port Size
2
S1
4
2
3
SV9-8B
1
3
4
2
S1
00 – 00
8 Voltage Rating1
4
B
*SV9-8B J
1
7 Port Sizes
(These model digits are not stamped on the valve.)
Blank S2
2
1
3
S1
– ****
F
S1
Code
S2
1
SV9-8A
E
S1
Blank - No manual override
M - Manual override
S2
PFRS-XX
S1
1
3
4
7
3
3 P
4 Spool Center
Condition
4
2
S2
S1
1
**4
2
3
6
PFRS-XX
5
1
SV9-8A
1
3 P
2
S1
*EF – *
4
1
S2
S2
EF
2
3
LS 5
PFRD-XX
1
3 P4
SV9 – 10CF
Model Code
CF
PFRS-XX4
1
EF
2
4
SV9-10 - Solenoid Valve
23 P 4
S1
2
1
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Leadwire
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
S2 (DC only)
J - Metripack
280 male
SV9-8F
(DC only)
10 Coil Series 1
Blank - No Coil
J - 10 series, 23W
11 Coil Special Features 1
Blank - None
12 Valve Special Features 1
00 -None
(Only required if valve has special features,
omitted if “00.”)
1 These model digits are not stamped on
the valve.
B-6.A
eaton Screw-In Cartridge Valves Data Sheets E-VLSC-MC001-E September 2011
An Eaton Brand
SV9-10 - Solenoid Valve
Dimensions
mm (inch)
Torque cartridge in aluminum
or steel housing
34-41 Nm (25-30 ft. lbs).
Valve is shown with “W” coil.
See other coils in Section C.
Note: When solenoid valve is
ordered as cartridge only, coil
nut is included.
When solenoid valve is
ordered without coils, it will
be supplied with only the nut.
The spacer must be ordered
separately.
29,6
(1.16)
WARNING
Maintain 5-8 Nm
(4-6 ft. lbs) maximum
torque on valve tube
nut. Over tightening may
cause valve failure.
•
Ø 38,9
(1.53)
Ø 38,9
(1.53)
"S1"
116.1
(4.57)
"S2"
61.8
(2.43)
An Eaton Brand
This valve uses the
J series, 23 W coil.
Spare Parts
Coil nut
Coil spacer
565558
02-179226
29,6
(1.16)
Manual
override
option
"S1"
138.3
(5.44)
"S2"
61.8
(2.43)
eaton Screw-In Cartridge Valves Data Sheets E-VLSC-MC001-E September 2011
B-7.A