MONARCH INDUSTRIES LIMITED
51 Burmac Road, Winnipeg, MB, R2J 4J3
PO Box 429, Winnipeg, MB, R3C 3E4
Phone: (204) 786-7921 Fax: (204) 889-9120
MONARCH SURPLUS EQUIPMENT FOR SALE
Monarch Industries is expanding production capacity for hydraulic cylinders at its 51 Burmac Road
facility. This World Class initiative includes a plant re-layout and the continuous improvement team has
identified the following equipment, valued at approximately $1 Million, as being surplus to the
continuing operations of this plant.
For further information on this equipment, please feel free to contact John Sawatzky at the following:
Phone: (204) 786-7921 ext. 830
Email: [email protected]
Thank you for your interest in this project
1. 2010 Mazak Horizontal Machining Centre
Model:
HCN 6800
Table Size:
24.8 X 24.8”
Spindle Power:
50 Horsepower
Spindle Speed:
35 – 10,000 RPM
Spindle Taper:
CAT 50
Tool Chain:
160 Pockets
X Axis Travel:
41.34”
Y Axis Travel:
35.34”
Z axis Travel:
38.58”
Power On Hours: 12,908 (Feb. 19, 2015)
Auto Hours:
11,224
Cutting Hours:
6,057
Available:
Aug. 1, 2015
Price:
$299,000 (US Funds)
This machine has all the bells and whistles – spindle probe, 1,000 psi through the spindle coolant,
Niagara coolant system, FMS ready …. too many options to list. Machine is in great condition and has
been expertly maintained by trained millwrights using MP2 maintenance software.
June 25, 2015
Page 1 of 6
MONARCH INDUSTRIES LIMITED
51 Burmac Road, Winnipeg, MB, R2J 4J3
PO Box 429, Winnipeg, MB, R3C 3E4
Phone: (204) 786-7921 Fax: (204) 889-9120
2. 2007 Mazak Horizontal Machining Centre
Model:
HCN 6800
Table Size:
24.8 X 24.8”
Spindle Power:
50 Horsepower
Spindle Speed:
35 – 10,000 RPM
Spindle Taper:
CAT 50
Tool Chain:
160 Pockets
X Axis Travel:
41.34”
Y Axis Travel:
35.34”
Z axis Travel:
38.58”
Power On Hours: 41,504 (Feb. 19, 2015)
Auto Hours:
35,574
Cutting Hours:
18,983
Available:
Aug. 1, 2015
Price:
$269,000 (US Funds)
This machine is the slightly older twin of the first machine and has all the same bells and whistles –
spindle probe, 1,000 psi through the spindle coolant, Niagara coolant system, FMS ready …. too many
options to list. Machine is in great condition and has been expertly maintained by trained millwrights
using MP2 maintenance software.
3. 2010 Zoller Optical Tool Presetter
Model:
Smile 400
Software:
Windows XP/Pilot 3
Printers:
Inkjet & Label
Price:
$14,900 (US Funds)
X axis:
Z axis:
Max Tool Dia.
8.3”
15.7”
16.5”
RFID CHIP in retention knob.
Read by tool presetter and
machine. Automatically identifies
tool. Never use the wrong tool or
wrong offset again!
Using Mazak’s Cybertool database and the RFID chip has eliminated all tooling errors!
June 25, 2015
Page 2 of 6
MONARCH INDUSTRIES LIMITED
51 Burmac Road, Winnipeg, MB, R2J 4J3
PO Box 429, Winnipeg, MB, R3C 3E4
Phone: (204) 786-7921 Fax: (204) 889-9120
4. 1997 Okuma Horizontal Machining Centre
Model:
MX-60HB
Table Size:
24.8 X 24.8 inches
Spindle Power:
27 Horsepower
Spindle Speed:
50 – 5,000 RPM
Spindle Taper:
CAT 50
Tool Chain:
100 Pockets
X Axis Travel:
39.37”
Y Axis Travel:
31.50”
Z axis Travel:
31.89”
Power On Hours: 77,329 (June 22, 2015)
Spindle Hours:
34,229
Cutting Hours:
19,438
Available:
Immediately
Price:
$59,000 (US Funds)
Although this machine is older than the Mazak’s, it still has the ability to remove material fast and make
accurate parts. It too has a Renishaw spindle probe and 1,000 psi through the spindle coolant. The
great feature with this machine is that it has only three leveling screws – all the rigidity is built into the
massive cast iron frame. This makes the machine easy to move and install.
5. 1996 Okuma CNC lathe
Model:
Chuck Size:
Hole Through Spindle:
Hole Through Draw Tube:
Max Turning Dia:
X Axis Travel:
Z Axis Travel:
Spindle Power:
Power On Hours:
Spindle Hours:
Cutting Hours:
Price (US Funds):
LB35
15”
4.33”
3.50”
17.72”
12.99”
36.22”
40 Horsepower
2,200 - see note
786
675
$50,000
This is a great lathe that will still turn parts within ‘tenths’ of a thou’. Operating system was reloaded in
December 2014 and the hours shown are since then. Monarch owned this lathe from new and has all
the original documentation.
June 25, 2015
Page 3 of 6
MONARCH INDUSTRIES LIMITED
51 Burmac Road, Winnipeg, MB, R2J 4J3
PO Box 429, Winnipeg, MB, R3C 3E4
Phone: (204) 786-7921 Fax: (204) 889-9120
6. 1996 Okuma CNC lathe
Model:
Chuck Size:
Hole Through Spindle:
Hole Through Draw Tube:
Max Turning Diameter:
X Axis Travel:
Z Axis Travel:
Spindle Power:
Price (US Funds):
L1420
15”
4.33”
3.50”
14.17”
9.05”
50.0”
30/20 HP
$36,000
Another great lathe from Okuma – this one with longer Z axis travel.
7. 1998 Okuma Vertical Machining Centre
Model:
MX45VAE
Table Size:
20.0 X 39.4”
Spindle Power:
10 Horsepower
Spindle Speed:
50 – 7,000 RPM
Spindle Taper:
CAT 40
X Axis Travel:
30.0”
Y Axis Travel:
18.1”
Z Axis Travel:
17.7”
Power On Hours:
76,410
Spindle Hours:
22,824
Cutting Hours:
14,387
Price (US Funds):
$33,000
Okuma VMC with through the spindle coolant. Well maintained machine using MP2 maintenance
software.
June 25, 2015
Page 4 of 6
MONARCH INDUSTRIES LIMITED
51 Burmac Road, Winnipeg, MB, R2J 4J3
PO Box 429, Winnipeg, MB, R3C 3E4
Phone: (204) 786-7921 Fax: (204) 889-9120
8. 1996 Okuma Vertical Machining Centre
Model:
MX45VA
Table Size:
18.1 X 29.9”
Spindle Power:
10 Horsepower
Spindle Speed:
50 – 7,000 RPM
Spindle Taper:
CAT 40
X Axis Travel:
22.0”
Y Axis Travel:
18.1”
Z Axis Travel:
17.7”
Power On Hours:
73,215
Spindle Hours:
19,453
Cutting Hours:
12,289
Price (US Funds):
$27,000
Japanese built VM C. Machine is equipped with Yuasa rotary table and drive.
9. 1997 Okuma CNC Lathe
Model:
Chuck Size:
Hole Through Spindle:
Hole Through Draw Tube:
Max Turning Diameter:
X Axis Travel:
Z Axis Travel:
Spindle Power:
Power On Hours:
Spindle Hours:
Cutting Hours:
Price (US Funds):
L1420
10”
12” Available
3.15”
2.50”
14.17”
9.05”
26.38”
30/20 HP
91,377
28,138
16,942
$33,000
Okuma builds great lathes. This lathe continues to machine accurate parts quickly.
June 25, 2015
Page 5 of 6
MONARCH INDUSTRIES LIMITED
51 Burmac Road, Winnipeg, MB, R2J 4J3
PO Box 429, Winnipeg, MB, R3C 3E4
Phone: (204) 786-7921 Fax: (204) 889-9120
10. 1974 Correa Universal Milling Machine
Model:
Table Size:
Spindle Power:
Spindle Speed:
Spindle Taper:
X Axis Travel:
Y Axis Travel:
Z Axis Travel:
Price (US Funds):
FU-200
19 X 79”
20 Horsepower
22 – 1,120 RPM
# 50 MM
67.00”
15.75”
22.5”
$6,900
Solid traditional milling machine with a horizontal spindle and a vertical attachment. Machine originally
built in 1974 and purchased new in 1977,
June 25, 2015
Page 6 of 6