LELU
TM
TM
Commercial Exit Sign
rev. 1, 06.03.2014
ABOUT — LELU is a built-to-order exit sign designed for architectural
Specifier's Reference
interiors. The fixture is ideal for environments where superior aesthetics,
Project
TM
illumination, and graphic performance are required.
Type
Model No.
CONSTRUCTION —
• Precision milled dimensional acrylic letters press-fit to a continuous
Comments
aluminum back plate. Letters float visually with no background.
• Letters are 6" high with 3/4" stroke.
• Bracket and back plate assembly available in 4 finishes (Clear Aluminum,
Satin White, Satin Black, and Polished Chrome).
• Right or Left directional indicator available for all fixtures. Chevron must
be specified upon ordering and may not be added later.
POWER SOURCE OPTIONS —
• INTEGRAL power sources locate all electronics directly in the wall or
ceiling adjacent to the sign which mounts directly to the face plate at the
electrical box. The sign, power source, battery, battery test button and
LED indicators are located together. With the INTEGRAL mounting option
the sign and the power source are mounted to a .25” thick aluminum
face plate which fastens to a trim ring and electrical box (see "Rough In"
LEDs / OPTICS —
below). The electrical box and trim ring must be installed prior to adjacent
• Energy-efficient compact LEDs provide bright, uniform illumination.
ceiling or wall finishes.
• LEDs and lens are available in RED or GREEN. Consult local code
• REMOTE power sources locate the electrical box up to 20’ away
to compliance requirements. In order to maintain compliance with UL
from the sign which fastens directly to the wall or ceiling with a minimal
design standards, green exit signs may not be mounted adjacent to green
1.75” aluminum escutcheon. The sign is located remote from the power
surfaces and red exit signs may not be mounted adjacent to red surfaces.
source, battery and battery test button. With the REMOTE mounting
• All fixtures are single-face.
option the sign is mounted to a round escutcheon which is mounted to an
escutcheon bracket in the ceiling or wall. The power source is mounted
ELECTRONICS —
to a .25” thick aluminum face plate which fastens to a trim ring and
• Dual voltage input 120/277 VAC, 60Hz, 9w max.
electrical box. The electrical box and trim ring must be installed prior to
• Maintenance free, sealed lithium ion battery provides a minimum of 90
adjacent ceiling or wall finishes.
minutes of emergency run time with 24 hour recharge
• This exit sign is not rated for exterior use.
UL LISTED—
ROUGH IN —
• Compliant with UL 924.
• Both INTEGRAL and REMOTE installations require use of Crouse-Hinds
• NFPA 101 compliant (Life Safety Code).
3-gang electrical box (# TP871), trim ring (# TP653), and ground screws
• Listed in the U.S. and Canada by Underwriter Laboratories.
(# TP711) provided by others. See details on pages 2–3 for locations.
• Designed and Made in U.S.A.
Made in U.S.A.
WARRANTY—
• 5 year limited warranty on fixture and battery.
Fixtures and systems shown here subject to pending patent applications.
ORDERING INFORMATION & OPTIONS
Example: INT / Right-CL / Red-W / BB
POWER SOURCE *
MOUNTING
CHEVRON
COLOR
FINISH
BATTERY BACK-UP
INT
INTEGRAL
Top
Ceiling Mount
NC
No Chevron
Red Red
CA
Clear Aluminum
BB
REM
REMOTE
Back
Wall Mount
CR
Chevron Right
Grn Green
W
White
(blank) None, A/C Only
Right Wall Mount
CL
Chevron Left
P
Gloss Black
*See details on pg 2–3
Left
Battery Back-up
Wall Mount
TM
Architectural Safety Components, LLC
LELU
www.architecturalsafety.com
Subject to change without notice
Specifications
© 2014 All Rights Reserved
Page 1/3
LELU
TM
TM
Commercial Exit Sign
rev. 1, 06.03.2014
4516"
518 "
77 8"
3
4
"
2716"
412 "
11116 "
11516"
23 4"
6"
4516"
1
4
"
INTEGRAL (INT) / TOP MOUNT (Top) – NO CHEVRON (NC)
Back View
Front View
Top View
1516"
INTEGRAL (INT) / LEFT MOUNT (Left) – CHEVRON LEFT (CL)
77 8"
4
3
"
4
3
33 8"
4516"
21316"
6"
41516"
55 8"
25 8"
"
3
8
"
318 "
11"
Back View
Front View
Top View
1
4
"
77 8"
212 "
4
3
21316"
4"
3
3
3 8"
6"
55 8"
41516"
5
2 8"
"
3
8
"
1516"
INTEGRAL (INT) / RIGHT MOUNT (Right) – CHEVRON RIGHT (CR)
4516"
Back View
103 8"
Front View
Top View
23 4"
77 8"
518 "
3
4
"
3
4
"
3
4
1
4
6"
23 4"
412 "
"
"11316"
3
4
"
INTEGRAL (INT) / BACK MOUNT (Back) – NO CHEVRON (NC)
17 8"
4516"
Back View
Front View
Top View
TM
Architectural Safety Components, LLC
LELU
www.architecturalsafety.com
Subject to change without notice
Specifications
© 2014 All Rights Reserved
Page 2/3
LELU
TM
TM
Commercial Exit Sign
rev. 1, 06.03.2014
23 4"
314 "
518 "
77 8"
3
4
"
6"
3
4
"
418 "
1
8
"
REMOTE (REM) / TOP MOUNT (Top) – NO CHEVRON (NC)
Back View
Front View
Top View
"
318 "
77 8"
3
3
33 8"
4
"
6"
55 8"
25 8"
4
"
3
8
1
8
314 "
"
REMOTE (REM) / LEFT MOUNT (Left) – CHEVRON LEFT (CL)
418 "
11"
Back View
Front View
Top View
1
8
"
212 "
77 8"
4
3
4
3
3
3 8"
"
6"
55 8"
5
2 8"
"
3
8
"
314 "
REMOTE (REM) / RIGHT MOUNT (Right) – CHEVRON RIGHT (CR)
418 "
Back View
103 8"
Front View
Top View
REMOTE (REM) / BACK MOUNT (Back) – NO CHEVRON (NC)
77 8"
3916"
6"
314 "
Back View
Front View
23 8"
518 "
212 "
23 4"
Top View
TM
Architectural Safety Components, LLC
LELU
www.architecturalsafety.com
Subject to change without notice
Specifications
© 2014 All Rights Reserved
Page 3/3