AUTOMATIC
BINDING MACHINE
machine is designed t
General This
using less manpower than
Features
MODEL
1. Yield rate of binding wire is 100%
The binding mechanism of this machine uses all binding wires
completely (100%) and therefore no wire is wasted.
LV70
2. Continuous supply of binding wire
Without stopping the binding machine operation, even during
automatic operation, the binding wire can be supplied
continuously, and therefore no time is wasted.
3. Tight binding
The binding section of this machine consists of feeding,
clamping, tightening, cutting, and wire twisting mechanisms.
Especially in the binding process, twisting is carried out only
when there is a tension (variable) in the binding wire.
Therefore, extremely tight binding is made possible.
4. Safety measures for knot
Both ends of the binding wire after binding are bent to the
work piece side. Therefore, there is no risk involved during the
handing work.
5. Strong, secure binding
Strong, secure binding is ensured as the above items, 3.1 3.4, illustrate.
Piling breaks during handling work and the dropping of binding
wires rarely occur. With regard to this, we have a good
reputation with all our customers, in every field.
Sequence of the operation
This machine is operated under electorohydraulic contorol in the following.
The head moves up
The leading end of the wire is clamped
The binding wires tighten around the material
The wires clamp at their crossing point
The wire is cut
A small shell opens
The wire twists
The wire is flattened
The head moves down
The small shell closes
The wire is fed into the shell guide
MODEL
MODEL
LV70
2L70C
MODEL
2L70C（Tow of ties）
to bundle steel bars automatically
is necessary for manual bundling.
Sequence of the operation
MODEL
ASV20
This machine is operated under electro-pneumatic
control in the following sequence of operation.
MODEL
ASV20
Closing of both shells
Feeding of binding wire into shell
Clamping of end of binding wire
Tightening of bar with binding wire
Clamping at crossing point
Opening of both smalls and
Cutting of binding wire
Twisting of binding wire
Flattening of binding wire
Returning of twisting
■ Specitications
MODEL
Form
LV
MODEL
2L
MODEL
ASV
Binding cross section
φ70∼φ1200mm
φ100∼φ1200mm
φ20∼φ300mm
Binding time
8sec. ※MODEL LV70
15sec.（at tow of ties）※MODEL 2L70
4sec.※MODEL ASV20
1 4（450°with a twisting head floot system） 1 4（450°with a twisting head floot system）
1
3/4（270°）1 ）
4（450°
One
one・two（switching system）
one
Material
Mild steel SWRM8（JIS G 3505）
Mild steel SWRM8（JIS G 3505）
Annealed wire（JIS G 3532
Diameter
φ5.5∼φ6.5（±0.2mm）
φ5.5∼φ6.5（±0.2mm）
φ2.6∼φ3.0（±0.2mm）
35∼45kg/mm
35∼45kgf/mm
30∼40kg/mm
7.5kw×4P（for hydraulic unit）
Totally enclosed with an open fan
11kw×4P（for hydraulic unit）
Totally enclosed with an open fan
Electoro-hydraulically controlled
Electoro-hydraulically controlled
Number of twists
Number of ties
B
i
n
d
i
n
g
w
i
r
e
1
Tensile strength
Motor
Control
Binding Samples
1
2
2
SWM-A）
2
Electoro-pneumatically controlled
COIL AUTOMATIC
BINDING MACHINE
Junction:
Spot welding
■Specifications
Materials
B
i
n
d
i
n
g
b
a
n
d
Finish
Tensile strength
Band steel (Equivalent to SAE1020)
Bluing wax finished
60∼70kg/mm2, elongation 8% or more
(Oscillating winding)
25mm,32mm ±0.2mm Width×1.0 ±0.05mm Thickness
Bend: Max. 1.5mm per meter
Dimensions
Camber of cross section: Max. 0.2mm
OD:φ625mm, ID:φ406mm
Height: 190mm or less, Weight: 200kg
M/C spec.
Attached structure
Junction:Spot welding
Number of spots: 2
Hoop dispensev
9 Takiharucho, Minami-ku, Nagoya, 457-8577 Japan
TEL. +81-52-611-7173 FAX. +81-52-611-4701
2-4-1 Yako, Kawasaki-ku, Kawasaki, Kanagawa, 210-0863 Japan
Tokyo Office
TEL. +81-44-266-3862 FAX. +81-44-266-3796
Osaka Office
Shin-Osaka Bldg. East 9F, 17-8 Higashi-Nakajima1, Higashi-Yodogawa-ku
Osaka, 533-0033 Japan
TEL. +81-6-6990-6033 FAX. +81-6-6990-6034
Takiharu Plant 9 Takiharucho, Minami-ku Nagoya, 457-8577 Japan
TEL. +81-52-611-7157 FAX. +81-52-611-4701
39 Motohamacho, Tokai, Aichi, 477-0035 Japan
Chita Plant
TEL. +81-562-33-1287 FAX. +81-562-33-1519
5-3 Tokaicho, Tokai, Aichi 476-0015 Japan
Tokai Plant
(in Nagoya Iron Works of Nippon Steel Corp.)
TEL. +81-52-604-4646 FAX. +81-52-604-4649
Head Office
U R L h t t p : // w w w . d m - d a i d o . c o . j p
03.12.0,2 DLS