Solar Powered Decorative Lights
1) Attach plastic cylinder (c) onto ground stake (b)
by firmly pressing into place.
(a)
(d)
(b)
2) Remove the base plate (d) by turning counterclockwise and lifting. Turn the unit On. You will
only need to do this once, as the photosensitive
cell will turn the lights on and off automatically.
There are two settings on the back of the solar
cell: Flash and Solid. Setting the switch to Flash
will make the bulbs flash randomly, while setting
it to Solid will keep the bulbs a solid white.
3) Attach stake to baseplate by pressing firmly. Reattach
baseplate / stake by turning clockwise.
4) Screw base onto the solar unit by placing the connected
stake piece onto the solar panel and twisting clockwise.
5) Place entire unit in a place with lots of sunlight.
Direct sunlight will yield the best results.
6) String the lights as you would any other decorative string lights ,
and sit back and enjoy your new Solar Powered Decorative Lights.
IMPORTANT:
· The light string solar panel MUST be placed in a well-lit location for
maximum sunlight absorption
· Anything that shades this panel will affect the brightness and
lighting duration
· Six hours of light exposure are required for adequate illumination
· Charge battery for at least 8 hours before first use. After charging it,
select mode - either solid or flashing
DO NOT DISPOSE OF OLD BATTERIES - THEY SHOULD BE RECYCLED
(c)