PS-62000 6 Volt 210.0 AH

PS-62000 6 Volt 210.0 AH
Features
• Absorbent Glass Mat (AGM) technology for superior
performance
• Valve regulated, spill proof construction allows safe
operation in any position
• Power/volume ratio yielding unrivaled energy density
• Rugged impact resistant ABS case and cover (UL94-HB)
• Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and
C.A.B. certified
• U.L. recognized under file number MH 20845
Terminals
Performance Specifications
(mm)
Nominal Voltage ...........................................................................6 volts (3 cells)
20mm
Nominal Capacity
M6
• T8: Threaded copper
insert terminals with
mating M6 bolt
6mm
Physical Dimensions: in (mm)
20-hr.
(10.5A to 5.25 volts) .......................................................... 210.0 AH
10-hr.
(20A to 5.25 volts) ............................................................. 200.0 AH
5-hr.
(36A to 5.10 volts) .............................................................. 180.0 AH
3-hr.
(56A to 4.50 volts) ............................................................... 168.0 AH
1-hr.
(134A to 4.50 volts) ........................................................... 134.0 AH
Approximate Weight ........................................................ 63.93 lbs. (29.0 kg)
Energy Density (20-hr. rate) .............................. 1.82 W-h/in3 (110.93 W-h/l)
Specific Energy (20-hr. rate) .............................. 19.71 W-h/lb (43.45 W-h/kg)
W
Internal Resistance (approx.) ........................................................ 2 milliohms
Max Discharge Current (7 Min.) ................................................ 630 amperes
Max Short-Duration Discharge Current (10 Sec.) ................. 2100 amperes
Shelf Life (% of nominal capacity at 68°F (20°C))
1 Month ...................................................................................................... 97%
Sealed Rechargeable
Battery
HT
H
MODEL PS-62000
6 Volt 210.0 Amp. Hr.
TTE RY
www.power-sonic.com
BA
MH20845
ST B E R
MU
Pb
YCL ED
EC
®
3 Months ..................................................................................................... 91%
6 Months .................................................................................................... 83%
Operating Temperature Range
NONSPILLABLE
L
Charge .. ........................................................... -4°F (-20°C) to 122°F (50°C)
Discharge ....................................................... -40°F (-40°C) to 140°F (60°C)
L: 12.05 (306) W: 6.65 (169) H: 8.65 (220) HT: 8.96 (228)
Case ...................................................................................................... ABS Plastic
Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for
height dimensions. All data subject to change without notice.
Power-Sonic Chargers ......................................................................PSC-64000
To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website.
All data subject to change without notice.
www.power-sonic.com
PS-62000 6 Volt 210.0 AH
®
Discharge Characteristics
100
Charging is not
necessary unless
100% of capacity
is required.
80
Charging before
use is necessary
to help recover
full capacity.
5oC
(41oF)
60
o
30 C
o
(86 F)
40oC
(104oF)
40
0
7.0
0
2
4
6
8
10
Charge may fail
to restore full
capacity. Do not
let batteries reach
this state.
20oC
(68oF)
12
14
16
18
20
o
6.0
5.5
5.0
4.5
2.4
6
12
24 36 48 1
2
Discharge Time
4 6 8 10
20 4 0
h
Life Characteristics in Stand-By Use
5
Retention Capacity (%)
h
210
min
20
15
10
Discharge Time
10.5
420
1.2
Discharge Time vs. Discharge Current
21
42
105
Final
Voltage
4.0
Standing Period (Months)
o
Ambient Temperature 20 C (68 F)
6.5
Terminal Voltage (V)
Capacity Retention Ratio (%)
Shelf Life & Storage
Final
Voltage
5.25V
2
5.10V
1
4.80V
min
30
4.50V
10
5
o
4.05V
10.5
21
42
105
210
80
60
20
0
o
Note: Due to the self-discharge characteristics of this type of battery, it is
imperative that they be charged within 6 months of storage, otherwise permanent
loss of capacity might occur as a result of sulfation.
Chargers
1
2
3
4
Life Characteristics in Cyclic Use
120
Retention Capacity (%)
Discharge Current (A)
“Float” or “Stand-By” Service: Hold battery across constant voltage source of
6.75 to 6.90 volts continuously. When held at this voltage, the battery will seek its
own current level and maintain itself in a fully charged condition.
0
Years
420
Cycle Applications: Limit initial current to 30A. Charge until battery voltage
(under charge) reaches 7.20 to 7.35 volts at 68°F (20°C). Hold at 7.20 to 7.35
volts until current drops to under 2.1A. Battery is fully charged under these
conditions, and charger should be disconnected or switched to “float” voltage.
Float Charging Voltage
2.25 - 2.30 V/Cell
40
40 C (104 F)
o
o
20 C (68 F)
o
o
0 C (32 F)
Charging
Ambient Temperature 20˚C (68˚F)
100
100
80
60
Discharge
Depth 100%
Discharge
Depth 50%
Discharge
Depth 30%
40
1. Discharge Current 0.2C (Final Voltage 1.7V/Cell)
2. Charge Current: 0.1C
3. Ambient Temperature: 20oC to 25oC (68oF to 77oF)
20
0
0
200
400
600
800
1000
1200
Number of Cycles
Further Information
Power-Sonic offers a wide range of chargers suitable for batteries up to 100AH.
Please refer to the Charger Selection Guide in our specification sheets for “C-Series
Switch Mode Chargers” and “Transformer Type A and F Series”. Please contact our
Technical department for advice if you have difficulty in locating suitable models.
Please refer to our website www.power-sonic.com for a complete range of useful
downloads, such as product catalogs, material safety data sheets (MSDS), ISO
certification, etc..
Contact Information
DOMESTIC SALES
Tel: +1-619-661-2020
Fax: +1-619-661-3650
[email protected]
www.power-sonic.com
CUSTOMER SERVICE
Tel: +1-619-661-2030
Fax: +1-619-661-3648
[email protected]
TECHNICAL SUPPORT
Tel: +1-619-661-2020
Fax: +1-619-661-3648
[email protected]
INTERNATIONAL SALES
Tel: +1-650-364-5001
Fax: +1-650-366-3662
[email protected]
CORPORATE OFFICE • 7550 Panasonic Way • San Diego, CA 92154 • USA • Tel: +1-619-661-2020 • Fax: +1-619-661-3650
© 2011. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners.
0211 1M