Olympian Plus Filter/Regulator-Lubricator Combination

Air line equipment
Olympian Plus Filter/RegulatorLubricator Combination Units
BL64
Olympian Plus plug in design
High Efficiency water and particle
removal
Quick release bayonet bowls
High visibility prismatic sight glass
Push to lock adjusting knob with
tamper resistant option
Constant oil density output with
varying flow
Technical data
Fluid:
Compressed air
Maximum pressure:
Transparent bowl: 150 psig (10 bar)
Metal bowl: 250 psig (17 bar)
Operating temperature*:
Transparent bowl:
0° to 125°F (-20° to 50°C)
Metal bowl:
0° to 175°F (-20° to 80°C)
Ordering information
Models listed include Micro-Fog lubricator, yoke with PTF threads, filter/regulator with knob adjustment, auto drain, metal bowl with liquid
level indicator, 40 µm element, relieving diaphragm, 10 bar (150 psig) regulating spring, gauge; lubricator with 1/4 turn manual drain, 7
fluid ounce (0.2 liter) metal bowl with liquid level indicator.
Combination Unit Type
Port Size
Model
Weight kg (lb)
Filter/Regulator-Lubricator (F/R-L)
1/4"
C64H-2AK-AD3-RMG-QDN
7.4 (5.20)
3/8"
C64H-3AK-AD3-RMG-QDN
6.9 (5.07)
1/2"
C64H-4AK-AD3-RMG-QDN
6.9 (5.00)
3/4"
C64H-6AK-AD3-RMG-QDN
6.0 (2.73)
7.28 (185) [G3/4 9.33 (237)]
Auto Drain 11.99 (305)†
Manual Drain 11.6 (294)†
Auto Drain 12.59 (321)†
Manual Drain 12.2 (310)†
Particle removal:
5 µm or 40 µm filter element
Materials
Body and yoke: Zinc
Bonnet: Aluminum
Bowl:
Transparent: Polycarbonate
Metal: Aluminum
Metal bowl liquid level indicator lens:
7 fluid ounce (0.2 liter): Transparent
nylon
1 quart (1 liter): Pyrex
Sight-Feed dome: Polycarbonate
Element: Sintered polypropylene
Elastomers: Neoprene and nitrile
4.9 (125)†
* Air supply must be dry enough to avoid ice formation at
temperatures below 35°F (2°C).
1.44
(37)
2.9 (74)
9.1 (233) [G3/4 10.3 (262)]
† Reduces by .16 (4mm) with knob in locked position.
Add .15 (37mm) for unit with T-handle.
Dimensions in inches (mm)
ALE-106
www.norgren.com/info/US-ALE-106
Olympian Plus Filter/Regulator-Lubricator Combination Units
BL64
Alternative Models
˙64˙-˙˙˙-˙˙˙-˙˙˙-˙˙˙
Lockout Valve
No lockout valve
With lockout valve on inlet
Substitute
C
D
Accessories
Wall brackets
B and Q
B and L *
Lubricator low oil level switch *
No accessories
Lubricator quick fill cap
Substitute
B
C
F
L
N
Q
Combination Unit Type
Standard Micro-Fog F/R-L
Standard Oil-Fog F/R-L
Micro-Fog F/R-L with porting
block between filter/regulator and lubricator
Oil-Fog F/R-L with porting block
between filter/regulator and lubricator
Substitute
H
J
K
Lubricator Bowl
1 quart (1 liter) metal with
pyrex liquid level indicator
7 fluid oz. (0.2 liter) metal
with plastic liquid level indicator
7 fluid oz. (0.2 liter) transparent with guard
Substitute
A
Port Size
1/4"
3/8"
1/2"
3/4"
Substitute
2
3
4
6
Substitute
A
G
Lubricator Drain
Manual, petcock
Closed bottom
Manual, 1⁄4 turn
Remote fill ††
Substitute
D
E
Q
R
Threads
PTF
ISO G parallel
Pressure Adjustment
Knob
T-bar
Substitute
K
T
Filter/Regulator Gauge
With gauge
No gauge
Substitute
G
N
Filter Drain
Automatic
Manual, petcock
Manual, 1⁄4 turn
Substitute
A
D
Q
Regulation spring **
5 to 60 psig (0.3 to 4 bar)
5 to 150 psig (0.3 to 10 bar)
10 to 250 psig (0.7 to 17 bar)†
Substitute
F
M
S
Filter Bowl
Metal with liquid level indicator
Metal, no liquid level indicator
Transparent with guard
Metal with pyrex liquid level indicator
Substitute
D
M
P
R
Filter/Regulator Diaphragm
Non relieving
Relieving
Substitute
N
R
Filter Element
5 µm
40 µm
75 µm
Substitute
1
3
4
L
D
P
* Lubricator low oil level switch available only with 1 quart (1 liter) bowl.
** Outlet pressure can be adjusted to pressures in excess of, and less than, those specified.
Do not use these units to control pressures outside of the specified ranges.
† Filter/regulator with 250 psig (17 bar) regulating spring available only the T-bar adjustment .
†† Lubricator with remote fill available only with 0,2 liter (7 fluid oz.) bowls.
Service Kits
Item
Service kit
Service kit
Service kit
Replacement elements
Replacement sight
glass
Replacement drains
Type
Relieving Filter-Regulator
Non-relieving Filter-Regulator
Lubricator
5 µm
25 µm
40 µm
B64, plastic
L64, plastic
B64 and L64, Pyrex
L64, 1 quart bowl, Pyrex
Automatic
Manual, 1/4 turn
Part number
4383-200
4383-201
4382-200
4338-01
4338-99
4338-02
4380-040
4380-042
4380-041
2273-22
3000-10
619-50
Filter-Regulator service kit includes port seals, louver ‘O’ ring, bowl ‘O’ ring and drain gasket,
slip ring, valve assembly, valve spring and diaphragm.
Lubricator service kit includes all seals, flow sensor, eyelet, dome screen, ball and spring.
ALE-107
Air line equipment
Filter-Regulator-Lubricator
Combination Units
64 Series
Olympian Plus plug in design
High Efficiency water and particle
removal
Quick release bayonet bowls
High visibility prismatic sight glass
Push to lock adjusting knob with
tamper resistant option
Constant oil density output with
varying flow
Technical data
Fluid:
Compressed air
Maximum pressure:
Transparent bowl: 150 psig (10 bar)
Metal bowl: 250 psig (17 bar)
Operating temperature*:
Transparent bowl:
0° to 125°F (-20° to 50°C)
Metal bowl:
0° to 175°F (-20° to 80°C)
Ordering information
Models listed include Micro-Fog lubricator, yoke with PTF threads, knob adjustment, filter with auto drain, metal bowl with liquid level
indicator, 40 µm element, regulator with relieving diaphragm, 10 bar (150 psig) regulating spring, gauge; lubricator with 1/4 turn manual
drain, 7 fluid ounce (0.2 liter) metal bowl with liquid level indicator.
Combination Unit Type
Filter-Regulator-Lubricator (F-R-L)
* Air supply must be dry enough to avoid ice formation at
temperatures below 35°F (2°C).
Model
C64A-2AK-AD3-RMG-QDN
C64A-3AK-AD3-RMG-QDN
C64A-4AK-AD3-RMG-QDN
C64A-6AK-AD3-RMG-QDN
Weight lb (kg)
10.2 (4.61)
9.7 (4.42)
9.6 (4.35)
8.8 (3.97)
1.44
(36.5)
2.91 (74)
13.3 (338) [14.4 (367) with 3/4" ports]
Manual Drain 9.21 (234)
Automatic Drain 9.90 (245)
2.48 (63)
11.4 (290) [13.5 (342) with 3/4" ports]
9.54 (243)**
Particle removal:
5 µm, 40 µm filter element
Materials
Body and yoke: Zinc
Bonnet: Aluminum
Bowl:
Transparent: Polycarbonate
Metal: Aluminum
Metal bowl liquid level indicator lens:
7 fluid ounce (0.2 liter): Transparent
nylon
1 quart (1 liter): Pyrex
Sight-Feed dome: Polycarbonate
Element: Sintered polypropylene
Elastomers: Neoprene and nitrile
Port Size
1/4"
3/8"
1/2"
3/4"
**Minimum clearance required to remove bowl.
Dimensions in inches (mm)
ALE-108
www.norgren.com/info/US-ALE-108
Filter-Regulator-Lubricator Combination Units
64 Series
Alternative Models
˙64˙-˙˙˙-˙˙˙-˙˙˙-˙˙˙
Lockout Valve
No lockout valve
With lockout valve on inlet
Substitute
C
D
Combination Unit Type
Standard Micro-Fog F-R-L
Standard Oil-Fog F-R-L
Substitute
A
B
Port Size
1/4"
3/8"
1/2"
3/4"
Substitute
2
3
4
6
Threads
PTF
ISO G parallel
Substitute
A
G
Pressure Adjustment
Knob
T-bar
Substitute
K
T
Filter Drain
Automatic
Manual, petcock
Manual, 1⁄4 turn
Substitute
A
D
Q
Filter Bowl
Metal with liquid level indicator
Metal, no liquid level indicator
Transparent with guard
Metal with pyrex liquid level indicator
Substitute
D
M
P
R
Filter Element
5 µm
40 µm
75 µm
Substitute
1
3
4
Accessories
B and D
Wall brackets
B and Q
Filter service indicator
B and L *
B, D, and Q
B, D, and L
Lubricator low oil level switch *
No accessories
Lubricator quick fill cap
Substitute
A
B
C
D
F
H
K
L
N
Q
Lubricator Bowl
Substitute
1 quart metal with pyrex liquid level indicator
A
7 fluid oz. metal with plastic liquid level indicator
D
7 fluid oz. transparent with guard
P
Lubricator Drain
Manual, petcock
Closed bottom
Manual, 1⁄4 turn
Remote fill ††
Substitute
D
E
Q
R
Regulator Gauge
With gauge
No gauge
Substitute
G
N
Regulation spring **
5 to 60 psig (0.3 to 4 bar)
5 to 150 psig (0.3 to 10 bar)
10 to 250 psig (0.7 to 17 bar)†
Substitute
F
M
S
Regulator Diaphragm
Non relieving
Relieving
Substitute
N
R
* Lubricator low oil level switch available only with 1 quart (1 liter) bowl.
** Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges.
† Regulator with 250 psig (17 bar) regulating spring available only the T-bar adjustment .
† Lubricator with remote fill available only with 7 fluid oz. (0.2 liter) bowls.
Service Kits
Item
Service kit
Service kit
Service kit
Service kit
Replacement
elements
Replacement sight
glass
Replacement drains
Filter service
indicator
Type
Filter
Relieving Regulator
Non-relieving Regulator
Lubricator
40 µm
5 µm
B64, plastic
L64, plastic
B64 & L64, pyrex
L64, 1 quart, pyrex
Automatic
Manual, 1/4 turn
Part number
4380-200
4381-200
4381-201
4382-200
4338-02
4338-01
4380-040
4380-042
4380-041
2273-22
3000-10
619-50
5797-50
Filter service kit includes port seals, lourve ‘O’ ring, bowl ‘O’ ring and drain
gasket.
Regulator service kit includes port and bottom plug, ‘O’ rings, valve assembly,
valve spring and diaphragm.
Lubricator service kit includes all seals, flow sensor, eyelet, dome screen, ball
and spring.
ALE-109
Air line equipment
Olympian Plus Filter-Lubricator
Combination Units
64 Series
Olympian Plus plug in design
High Efficiency water and particle
removal
Easy fill lubricator with quick release
bayonet bowls
High visibility prismatic sight glass
Constant oil density output with
varying flow
Technical data
Fluid:
Compressed air
Maximum pressure:
Transparent bowl: 150 psig (10 bar)
Metal bowl: 250 psig (17 bar)
Operating temperature*
Transparent bowl:
0° to 125°F (-20° to 50°C)
Metal bowl:
0° to 175°F (-20° to 80°C)
Ordering information
Models listed include Micro-Fog lubricator, yoke with PTF threads, filter with auto drain, metal bowl with liquid level indicator, 40 µm
element; lubricator with 1/4 turn manual drain, 7 fluid ounce (0.2 liter) metal bowl with liquid level indicator.
Combination Unit Type
Filter-Lubricator (F-L)
* Air supply must be dry enough to avoid ice formation at
temperatures below 35°F (2°C).
Particle removal:
5 µm, or 40 µm filter element
Manual drain connection:
Will fit 1/8-27 and 1/8-28 pipe thread
Automatic drain connection:
Will fit 1/8-27 and 1/8-28 pipe thread
Automatic drain operating
conditions (float operated):
Bowl pressure required to close drain:
Greater than 5 psig (0.3 bar)
Bowl pressure required to open drain:
Less than 3 psig (0.2 bar)
Minimum air flow required to close
drain: 2 scfm (1 dm3/s)
Manual operation: Depress pin inside
drain outlet to drain bowl
Nominal bowl size
Standard: 7 fluid ounce (0.2 liter)
Optional size for lubricator: 1 quart (1
liter)
For additional information
see website.
ALE-110
Port Size
1/4"
3/8"
1/2"
3/4"
Model
C64C-2AN-AD3-NNN-QDN
C64C-3AN-AD3-NNN-QDN
C64C-4AN-AD3-NNN-QDN
C64C-6AN-AD3-NNN-QDN
Weight lb (kg)
10.2 (4.61)
9.7 (4.42)
9.6 (4.35)
8.8 (3.97)
Service Kits
Item
Service kit
Service kit
Replacement elements
Replacement sight
glass
Materials
Body and yoke: Zinc
Bowl:
Transparent: Polycarbonate
Metal: Aluminum
Metal bowl liquid level indicator lens:
7 fluid ounce (0.2 liter): Transparent
nylon
1 quart (1 liter): Pyrex
Sight-Feed dome: Polycarbonate
Element: Sintered polypropylene
Elastomers: Neoprene and nitrile
Replacement drains
Service Indicator
Type
Filter
Lubricator
40 µm
5 µm
F64, plastic
L64, plastic
F64, L64, pyrex
L64, 1 quart, pyrex
Automatic
Manual, 1/4 turn
Part number
4380-200
4382-200
4338-02
4338-01
4380-040
4380-042
4380-041
2273-22
3000-10
619-50
5797-50
Filter service kit includes port seals, louver ‘O’ ring, bowl ‘O’ ring and drain gasket.
Lubricator service kit includes all seals, flow sensor, eyelet, dome screen, ball and spring.
www.norgren.com/info/US-ALE-110
Olympian Plus Filter-Lubricator Combination Units
64 Series
Dimensions in inches (mm)
Alternative Models
˙64˙-˙˙˙-˙˙˙-˙˙˙-˙˙˙
Lockout Valve
No lockout valve
With lockout valve on inlet
Substitute
C
D
Combination Unit Type
Standard Micro-Fog F-L
Standard Oil-Fog F-L
Substitute
C
D
Port Size
1/4"
3/8"
1/2"
3/4"
Substitute
2
3
4
6
Threads
PTF
ISO G parallel
Substitute
A
G
Regulator Option
Not Applicable
Substitute
N
Filter Drain
Automatic
Manual, petcock
Manual, 1⁄4 turn
Substitute
A
D
Q
Filter Bowl
Metal with liquid level indicator
Metal, no liquid level indicator
Transparent with guard
Metal with pyrex liquid level indicator
Substitute
D
M
P
R
Filter Element
5 µm
40 µm
75 µm
Substitute
1
3
4
Accessories
B and D
Wall brackets
B and Q
Filter service indicator
B and L *
B, D, and Q
B, D, and L
Lubricator low oil level switch *
No accessories
Lubricator quick fill cap
Substitute
A
B
C
D
F
H
K
L
N
Q
Lubricator Bowl
1 quart (1 liter) metal with
pyrex liquid level indicator
7 fluid oz. (0.2 liter) metal
with plastic liquid level indicator
7 fluid oz. (0.2 liter) transparent with guard
Substitute
A
Lubricator Drain
Manual, petcock
Closed bottom
Manual, 1⁄4 turn
Remote fill **
Substitute
D
E
Q
R
Regulator Option
Not Applicable
Substitute
N
Regulator Option
Not Applicable
Substitute
N
Regulator Option
Not Applicable
Substitute
N
D
P
7.28 (185) [9.33 (237) with 3/4" ports]
9.55** (243)
Manual Drain 9.21 (234)
Automatic Drain 9.90 (252)
2.48 (63)
* Lubricator low oil level switch available only with 1 quart (1 liter) bowl.
** Lubricator with remote fill available only with 7 fluid oz. (0.2 liter) bowls.
1.44 (37)
2.91 (74)
9.17 (233) [10.31 (262) with 3/4" ports]
** Minimum clearance required to remove bowl.
ALE-111