Reflect
™
I M P L A N T
S Y S T E M S
for more information please contact:
joel a. gonzales rda
head of clinical affairs
ids implants
e. [email protected]
c. 480-440-3927
More for you. More for your patients.
Featured in this brochure is our full line of Reflect™ Implant Systems. Reflect offers
surgical and prosthetic compatibility with well-known implant products and does so
at a fraction of the cost; while at the same time offering uncompromised quality and
performance.
Reflect™ Implants are manufactured with a
state-of-the-art surface treatment procedure that
creates macro, micro, and nano surface structures
that increase the bone to implant contact (BIC).
The sand-blasting, acid etching, and extensive
cleaning (S-L-A) of the Reflect surface achieves
ideal morphology for osseointegration. The cleaning
process also removes undesired residues deriving
from processing (fig 1); yielding contamination-free
surfaces that generate stable titanium-oxide layer
enhancing osseointegration (fig 2). Manufactured
from our Super Ti5, Reflect™ Implants provide
greater strength over implants manufactured with
Grade 4 Titanium. Studies show a high degree of
cellular proliferation encouraging osseointegration*
with SuperTi5.
figure 1 — Implant surface of
Competitor
figure 2 ­— Reflect Implant surface
Surface Analysis By X-ray Photoelectron Spectroscopy (XPS)
Reflect™ Implant’s cleaning process generates stable titanium-oxide layer that
chemically stabilizes the implant surface. The layer’s optimal thickness, of 3-4 nm,
attracts body fluids without concealing surface morphology, thus promoting bone
healing. The purpose of the surface analysis by X-ray Photoelectron Spectroscopy (XPS)
to assess the Reflect Implant surface in order to verify that any substances used in the
process have been washed from the surface and no undesirable particles remained.
Reflect Implant XPS atomic concentrations (%)
Reflect
Implant
C
Ti
O
Al
V
Ca
N
P
S
Na
Cl
K
Si
1 32.2413.7347.722.290.460.380.690.540.480.540.65 - 0.27
2
34.3612.8445.503.060.44 - 0.910.730.470.180.350.450.71
Results*
As can be seen from the above results, the undesirable contaminations that may be
related to water residuals and processing remains such as Ca, N, Zn, Na P, S, Cl, and
Si are absent or very low for Reflect Implants. Carbon layer that may be associated
with processing detergents lies well below the acceptance level of 40%.
* XPS examination was performed in Solid State Physics Institute, Technion research and development foundation.
2
idsimplants.com
866-277-5662
Reflect
RAPID IMPLANT SYSTEM
Reflect Rapid
™
I M P L A N T
S Y S T E M
• S-L-A surface provides high degree of cleanliness and osseointegration
• Surgically and prosthetically compatible with Noble Biocare® Noble Active®
• Internal conical connection for abutment-supported restorations and Multi
Unit abutments for long span bridges and bars
• Digital and stock prosthetic solutions available
• Strong conical connection
• Internal conical connection with hexagonal interlocking offers secure
positioning of abutments
• Thread design offers high initial stability
• Optimal prosthetic orientation and minimally invasive insertion
Implant Fixtures
Item No.
Description
RA3585
Reflect Rapid Implant Fixture 3.5mm Diameter, 8.5 Length
RA3510
Reflect Rapid Implant Fixture 3.5mm Diameter, 10 Length
RA3511
Reflect Rapid Implant Fixture 3.5mm Diameter, 11.5 Length
RA3513
Reflect Rapid Implant Fixture 3.5mm Diameter, 13 Length
RA3515
Reflect Rapid Implant Fixture 3.5mm Diameter, 15 Length
RA4385
Reflect Rapid Implant Fixture 4.3mm Diameter, 8.5 Length
RA4310
Reflect Rapid Implant Fixture 4.3mm Diameter, 10 Length
RA4311
Reflect Rapid Implant Fixture 4.3mm Diameter, 11.5 Length
RA4313
Reflect Rapid Implant Fixture 4.3mm Diameter, 13 Length
RA4315
Reflect Rapid Implant Fixture 4.3mm Diameter, 15 Length
RA5085
Reflect Rapid Implant Fixture 5.0mm Diameter, 8.5 Length
RA5010
Reflect Rapid Implant Fixture 5.0mm Diameter, 10 Length
RA5011
Reflect Rapid Implant Fixture 5.0mm Diameter, 11.5 Length
RA5013
Reflect Rapid Implant Fixture 5.0mm Diameter, 13 Length
RA5015
Reflect Rapid Implant Fixture 5.0mm Diameter, 15 Length
idsimplants.com
866-277-5662
3
Reflect Rapid
™
IMPLANT SYSTEM
Compatible with: Nobel Biocare® NobelActive®
Healing Abutments
Item No.
Description
RAHAS3N
Reflect Rapid Healing Abutment 3.5 mmD x 3 mmH NP
RAHAS3R
Reflect Rapid Healing Abutment 4.3 mmD x 3 mmH RP
RAHAS5N
Reflect Rapid Healing Abutment 3.5 mmD x 5 mmH NP
RAHAS5R
Reflect Rapid Healing Abutment 4.3 mmD x 5 mmH RP
RAHAF3N
Reflect Rapid Healing Abutment 4.7 mmD x 3 mmH NP
RAHAF3R
Reflect Rapid Healing Abutment 5.7 mmD x 3 mmH RP
RAHAF5N
Reflect Rapid Healing Abutment 4.7 mmD x 5 mmH NP
RAHAF5R
Reflect Rapid Healing Abutment 5.7 mmD x 5 mmH RP
Clinical Scanning Abutments
4
RRSAANP
Reflect Rapid Clinical Scanning Abutment, Anterior, NP
RRSAARP
Reflect Rapid Clinical Scanning Abutment, Anterior, RP
RRSAPNP
Reflect Rapid Clinical Scanning Abutment, Posterior, NP
RRSAPRP
Reflect Rapid Clinical Scanning Abutment, Posterior, RP
idsimplants.com
866-277-5662
Reflect
Reflect Rapid
™
IMPLANT SYSTEM
Compatible with: Nobel Biocare® NobelActive®
RAPID IMPLANT SYSTEM
Closed-Tray Transfers
Item No.
Description
RACICSN
Reflect Rapid Closed-Tray Transfer 3.5 mmD NP
RACICSR
Reflect Rapid Closed-Tray Transfer 4.3 mmD RP
RACICFN
Reflect Rapid Closed-Tray Transfer 4.7 mmD NP
RACICFR
Reflect Rapid Closed-Tray Transfer 5.7 mmD RP
(Closed-Tray Transfers include Titanium Guide Pin)
Open-Tray Transfers
RAOICSN
Reflect Rapid Open-Tray Transfer 3.5 mmD NP
RAOICSR
Reflect Rapid Open-Tray Transfer 4.3 mmD RP
RAOICFN
Reflect Rapid Open-Tray Transfer 4.7 mmD NP
RAOICFR
Reflect Rapid Open-Tray Transfer 5.7 mmD RP
(Open-Tray Transfers include Titanium Guide Pin)
idsimplants.com
866-277-5662
5
Reflect Rapid
™
IMPLANT SYSTEM
Compatible with: Nobel Biocare® NobelActive®
Implant Analogs
Item No.
Description
RAIANP Reflect Rapid Implant Analog NP
RAIARP Reflect Rapid Implant Analog RP
Bite Verification Cylinders
RABVCENP
Reflect Rapid Bite Verification Cylinder Engaging NP
RABVCERP
Reflect Rapid Bite Verification Cylinder Engaging RP
RABVNENP
Reflect Rapid Bite Verification Cylinder Non-Engaging NP
RABVNERP
Reflect Rapid Bite Verification Cylinder Non-Engaging RP
(Bite Verification Cylinders include Titanium Screw and Guide Pin)
Titanium Abutments
RATA45NP
Reflect Rapid Titanium Abutment 4.5 mmH NP
RATA45RP
Reflect Rapid Titanium Abutment 4.5 mmH RP
RATA60NP
Reflect Rapid Titanium Abutment 6 mmH NP
RATA60RP
Reflect Rapid Titanium Abutment 6 mmH RP
(Abutment Screws are sold separately)
6
4
idsimplants.com
866-277-5662
Reflect
Reflect Rapid
™
IMPLANT SYSTEM
Compatible with: Nobel Biocare® NobelActive®
RAPID IMPLANT SYSTEM
Titanium Esthetic Abutments
Item No.
Description
RATE15NP
Reflect Rapid Esthetic Abutment 3 mmH, Anterior 15° NP
RATE1ARP
Reflect Rapid Esthetic Abutment 3 mmH, Anterior 15° RP
RATE1PRP
Reflect Rapid Esthetic Abutment 3 mmH, Posterior 15° RP
RATESANP
Reflect Rapid Esthetic Abutment 3 mmH, Anterior, Straight NP
RATESARP
Reflect Rapid Esthetic Abutment 3 mmH, Anterior, Straight RP
(Esthetic Abutments include Titanium Screw)
UCLA Plastic Abutments
RAUCENNP
Reflect Rapid UCLA Plastic Abutment Engaging NP
RAUCENRP
Reflect Rapid UCLA Plastic Abutment Engaging RP
RAUCNENP
Reflect Rapid UCLA Plastic Abutment Non-Engaging NP ”
RAUCNERP
Reflect Rapid UCLA Plastic Abutment Non-Engaging RP
(UCLA Abutments include Titanium Screw and Guide Pin)
idsimplants.com
866-277-5662
7
5
Reflect Rapid
™
IMPLANT SYSTEM
Compatible with: Nobel Biocare® NobelActive®
Titanium Screws and Guide Pins
Item No.
Description
RATS00NP Reflect Rapid Titanium Screw NP
RATS00RP
Reflect Rapid Titanium Screw RP
RAGP20NP
Reflect Rapid Guide Pin Implant Level 20 mm NP (5-Pack)
RAGP20RP
Reflect Rapid Guide Pin Implant Level 20 mm RP (5-Pack)
Titanium Blanks
RATBNP
Reflect Rapid Titanium Blank NP
RATBRP
Reflect Rapid Titanium Blank RP
Multi-Unit Abutments
RA1725NP
Reflect Rapid 17° Multi-Unit Abutment 2.5 mmH NP
RA1735NP
Reflect Rapid 17° Multi-Unit Abutment 3.5 mmH NP
RA1725RP
Reflect Rapid 17° Multi-Unit Abutment 2.5 mmH RP
RA1735RP
Reflect Rapid 17° Multi-Unit Abutment 3.5 mmH RP
RA3035NP
Reflect Rapid 30° Multi-Unit Abutment 3.5 mmH NP
RA3045NP
Reflect Rapid 30° Multi-Unit Abutment 4.5 mmH NP
RA3035RP
Reflect Rapid 30° Multi-Unit Abutment 3.5 mmH RP
RA3045RP
Reflect Rapid 30° Multi-Unit Abutment 4.5 mmH RP
(Multi-Unit Abutments include Titanium Screw)
8
idsimplants.com
866-277-5662
Reflect
Reflect Rapid
™
IMPLANT SYSTEM
Compatible with: Nobel Biocare® NobelActive®
RAPID IMPLANT SYSTEM
Multi-Unit Abutments
Item No.
Description
RAMU15NP
Reflect Rapid Multi-Unit Abutment 1.5 mmH NP
RAMU25NP
Reflect Rapid Multi-Unit Abutment 2.5 mmH NP
RAMU35NP
Reflect Rapid Multi-Unit Abutment 3.5 mmH NP
RAMU15RP
Reflect Rapid Multi-Unit Abutment 1.5 mmH RP
RAMU25RP
Reflect Rapid Multi-Unit Abutment 2.5 mmH RP
RAMU35RP
Reflect Rapid Multi-Unit Abutment 3.5 mmH RP
RAMU45RP
Reflect Rapid Multi-Unit Abutment 4.5 mmH RP
RMUHC
Reflect Multi-Unit Temporary Healing Cap
RMUAD
Reflect Multi-Unit Abutment Driver
idsimplants.com
866-277-5662
9
Reflect Tapered Screw
™
I M P L A N T
S Y S T E M
• Surgically and prosthetically compatible with Zimmer® Tapered Screw Vent®
• S-L-A surface provides high degree of osseointegration
• Unique surface treatment and cleaning process encourage osseointegration
• Full line of prosthetic components for single tooth restorations and Multi Unit
abutments for long span bridges and bars
• Well documented internal hex connection
• Tapered design allows placement between convergent roots and in
immediate extraction sites
Implant Fixtures
10
Item No.
Description
RT3708
Reflect Tapered Screw Implant Fixture 3.7mm Diameter, 8 Length
RT3710
Reflect Tapered Screw Implant Fixture 3.7mm Diameter, 10 Length
RT3711
Reflect Tapered Screw Implant Fixture 3.7mm Diameter, 11.5 Length
RT3713
Reflect Tapered Screw Implant Fixture 3.7mm Diameter, 13 Length
RT3716
Reflect Tapered Screw Implant Fixture 3.7mm Diameter, 16 Length
RT4108
Reflect Tapered Screw Implant Fixture 4.1mm Diameter, 8 Length
RT4110
Reflect Tapered Screw Implant Fixture 4.1mm Diameter, 10 Length
RT4111
Reflect Tapered Screw Implant Fixture 4.1mm Diameter, 11.5 Length
RT4113
Reflect Tapered Screw Implant Fixture 4.1mm Diameter, 13 Length
RT4116
Reflect Tapered Screw Implant Fixture 4.1mm Diameter, 16 Length
RT4708
Reflect Tapered Screw Implant Fixture 4.7mm Diameter, 8 Length
RT4710
Reflect Tapered Screw Implant Fixture 4.7mm Diameter, 10 Length
RT4711
Reflect Tapered Screw Implant Fixture 4.7mm Diameter, 11.5 Length
RT4713
Reflect Tapered Screw Implant Fixture 4.7mm Diameter, 13 Length
idsimplants.com
866-277-5662
Reflect
Reflect Tapered Screw
™
IMPLANT SYSTEM
Compatible with: Zimmer® Dental Tapered Screw-Vent®
TA P E R E D S C R E W I M P L A N T S Y S T E M
Healing Abutments
Item No.
Description
RTHAS333
Reflect Tapered Healing Abutment 3.5 Platform x 3.5 mmD x 3 mmH
RTHAS443
Reflect Tapered Healing Abutment 4.5 Platform x 4.5 mmD x 3 mmH
RTHAS335
Reflect Tapered Healing Abutment 3.5 Platform x 3.5 mmD x 5 mmH
RTHAS445
Reflect Tapered Healing Abutment 4.5 Platform x 4.5 mmD x 5 mmH
RTHAF343
Reflect Tapered Healing Abutment 3.5 Platform x 4.7 mmD x 3 mmH
RTHAF453
Reflect Tapered Healing Abutment 4.5 Platform x 5.7 mmD x 3 mmH
RTHAF345
Reflect Tapered Healing Abutment 3.5 Platform x 4.7 mmD x 5 mmH
RTHAF455
Reflect Tapered Healing Abutment 4.5 Platform x 5.7 mmD x 5 mmH
Clinical Scanning Abutments
RTSAA3
Reflect Tapered Implant Clinical Scanning Abutment, Anterior, 3.5 mm
RTSAA4
Reflect Tapered Implant Clinical Scanning Abutment, Anterior, 4.5 mmP
RTSAP3
Reflect Tapered Implant Clinical Scanning Abutment, Posterior, 3.5 mm
RTSAP4
Reflect Tapered Implant Clinical Scanning Abutment, Posterior, 4.5 mmP
idsimplants.com
866-277-5662
11
IMPLANT SYSTEM
Compatible with: Zimmer® Dental Tapered Screw-Vent®
Item No.
Description
RTCIC33
Reflect Tapered Closed-Tray Transfer 3.5 Platform x 3.5 mmD x 10 mmH
RTCIC44
Reflect Tapered Closed-Tray Transfer 4.5 Platform x 4.5 mmD x 10 mmH
RTCIC34
Reflect Tapered Closed-Tray Transfer 3.5 Platform x 4.7 mmD x 10 mmH
RTCIC45
Reflect Tapered Closed-Tray Transfer 4.5 Platform x 5.7 mmD x 10 mmH
(Open-Tray Transfers Include Guide Pin)
Closed-Tray Transfers
RTOIC33
Reflect Tapered Open-Tray Transfer 3.5 Platform x 3.5 mmD x 10 mmH
RTOIC44
Reflect Tapered Open-Tray Transfer 4.5 Platform x 4.5 mmD x 10 mmH
RTOIC34
Reflect Tapered Open-Tray Transfer 3.5 Platform x 4.7 mmD x 10 mmH
RTOIC45
Reflect Tapered Open-Tray Transfer 4.5 Platform x 5.7 mmD x 10 mmH
(Closed-Tray Transfers Include Guide Pin)
12
idsimplants.com
866-277-5662
TA P E R E D S C R E W I M P L A N T S Y S T E M
Open-Tray Transfers
Reflect
Reflect Tapered Screw
™
Reflect
Reflect Tapered Screw
™
IMPLANT SYSTEM
Compatible with: Zimmer® Dental Tapered Screw-Vent®
TA P E R E D S C R E W I M P L A N T S Y S T E M
Implant Analogs
Item No.
Description
RTIA35
Reflect Tapered Implant Analog 3.5 Platform
RTIA45
Reflect Tapered Implant Analog 4.5 Platform
Bite Verification Cylinders
RTEN35
Reflect Tapered Bite Verification Cylinder Engaging 3.5 Platform
RTEN45
Reflect Tapered Bite Verification Cylinder Engaging 4.5 Platform
RTNE35
Reflect Tapered Bite Verification Cylinder Non-Engaging 3.5 Platform
RTNE45
Reflect Tapered Bite Verification Cylinder Non-Engaging 4.5 Platform
(Bite Verification Cylinders include Titanium Screw and Guide Pin)
Titanium Abutments
RT4535
Reflect Tapered Titanium Abutment 3.5 Platform x 4.5 mmH
RT4545
Reflect Tapered Titanium Abutment 4.5 Platform x 4.5 mmH
RT0635
Reflect Tapered Titanium Abutment 3.5 Platform x 6 mmH
RT0645
Reflect Tapered Titanium Abutment 4.5 Platform x 6 mmH
Ti Screw sold separately
idsimplants.com
866-277-5662
13
Reflect Tapered Screw
™
IMPLANT SYSTEM
Compatible with: Zimmer® Dental Tapered Screw-Vent®
UCLA Plastic Abutments
Item No.
Description
RTLAEN35
Reflect Tapered UCLA Plastic Abutment Engaging 3.5 Platform
RTLAEN45
Reflect Tapered UCLA Plastic Abutment Engaging 4.5 Platform
RTLANE35
Reflect Tapered UCLA Plastic Abutment Non-Engaging 3.5 Platform
RTLANE45
Reflect Tapered UCLA Plastic Abutment Non-Engaging 4.5 Platform
(UCLA Abutments include Titanium Screw and Guide Pin)
Titanium Screws and Guide Pins
RTTS35 Reflect Tapered Titanium Screw
RTGP50
Reflect Tapered Guide Pin (5-Pack)
Titanium Blanks
14
RTTB35
Reflect Tapered Titanium Blank 3.5mm
RTTB45
Reflect Tapered Titanium Blank 4.5mm
idsimplants.com
866-277-5662
Reflect
Reflect Tapered Screw
™
IMPLANT SYSTEM
Compatible with: Zimmer® Dental Tapered Screw-Vent®
TA P E R E D S C R E W I M P L A N T S Y S T E M
Multi-Unit Abutments
Item No.
Description
RT3501
Reflect Tapered Multi-Unit Abutment, 3.5 Platform x 1 mmH
RT3502
Reflect Tapered Multi-Unit Abutment, 3.5 Platform x 2 mmH
RT4501
Reflect Tapered Multi-Unit Abutment, 4.5 Platform x 1 mmH
RT4502
Reflect Tapered Multi-Unit Abutment, 4.5 Platform x 2 mmH
RT4503
Reflect Tapered Multi-Unit Abutment, 4.5 Platform x 3 mmH
RT4505
Reflect Tapered Multi-Unit Abutment, 4.5 Platform x 5 mmH
RT173502
Reflect Tapered 17° Multi-Unit Abutment, 3.5 Platform x 2 mmH
RT173503
Reflect Tapered 17° Multi-Unit Abutment, 3.5 Platform x 3 mmH
RT174502
Reflect Tapered 17° Multi-Unit Abutment, 4.5 Platform x 2 mmH
RT174503
Reflect Tapered 17° Multi-Unit Abutment, 4.5 Platform x 3 mmH
RT174505
Reflect Tapered 17° Multi-Unit Abutment, 4.5 Platform x 5 mmH
RT303503
Reflect Tapered 30° Multi-Unit Abutment, 3.5 Platform x 3 mmH
RT304503
Reflect Tapered 30° Multi-Unit Abutment, 4.5 Platform x 3 mmH
RT304505
Reflect Tapered 30° Multi-Unit Abutment, 4.5 Platform x 5 mmH
(Multi-Unit Abutments include Titanium Screw)
idsimplants.com
866-277-5662
15
Reflect Multi-Unit
™
A B U T M E N T
S Y S T E M
Multi-unit abutment system
common restorative components.
The Reflect™Multi-Unit Abutment System has common restorative
components across all Reflect Implant Systems. The components below can be
used with all Reflect Implant Multi-Unit abutments. No matter if there are different
Reflect implants in an arch, the Reflect™Multi-Unit Abutment System
universalizes the restorative platform. The Reflect™Multi-Unit Abutments
come packaged with the Abutment screw that matches the system screw. The
Prosthetic Screw is not included and needs to be ordered separately. The Reflect
Multi-Unit Scan abutment, Ti Temporary Abutment and Multi-Unit Healing cap
require .050 hex driver.
16
idsimplants.com
866-277-5662
Reflect
Reflect Multi-Unit
™
ABUTMENT
SYSTEM
Description
RMUAA
Reflect Multi-Unit Abutment Analog
RMUGP50
Reflect Multi-Unit Guide Pin .050” Hex
RMUICC
Reflect Multi-Unit Impression Coping, Closed-Tray
RMUICO
Reflect Multi-Unit Impression Coping, Open-Tray
RMURPSUD
Reflect Rapid Multi-Unit Prosthetic Screw
RMUPS50
Reflect Multi-Unit Prosthetic Screw .050” Hex
RMUSA
Reflect Multi-Unit Scan Abutment
RMUTT
Reflect Multi-Unit Titanium Temporary
RMUHC
Reflect Multi-Unit Temporary Healing Cap
RMUAD
Reflect Multi-Unit Abutment Driver
idsimplants.com
866-277-5662
M U LT I - U N I T A B U T M E N T S Y S T E M
Item No.
17
Surface Treatment Comparisons
Reflect Implant Surface Treatment
For fast and predictable osseointegration, Reflect Implant’s
surface treatment consists of sand-blasting, acid etching
(S-L-A) and extensive cleaning. This process achieves a highly
desirable combined outcome of a uniquely cleaned implant
surface with ideal morphology for accelerated integration.
Compared to other surface treatments available today such as
the TiUnite® which is a highly anodized surface treatment or the
resorbable blast media (RBM) surface like the Zimmer® Dental
MTX™ surface, S-L-A surfaces are considered the “Gold
Standard” in the dental implant industry.
TiUnite® is highly anodized Ti producing a textured surface
to accommodate osseointegration. The tubules are meant
to provide area for cellular ingrowth. One implant company
has applied this surface technology to their entire Grade 4 Ti
implant line.
Zimmer Dental’s MTX™ surface is a non-coated, microtextured
surface created by grit-blasting with hydroxylapatite particles,
followed by a cleaning in non-etching acid and distilled water
baths to remove residual blasting material. This surface is
commonly known as RBM surface treatment that is used on
most Grade 5 Ti implants.
TiUnite® is a registered trademark of Nobel Biocare®
Mtx ™ is a registered trademark of Zimmer® Dental
18
idsimplants.com
866-277-5662
Reflect Implant
™
P A
C
K
A
G
I
N
G
Reflect™ Implant’s multi-stage extensive
cleaning process removes undesired residues
deriving from processing, yielding contaminationfree surface. That surface is then protected from
contamination by packaging the implant in a
Titanium sleeve and in contact with the Titanium
cover screw. Our packaging assures that the
implant is only in contact with Titanium until you
remove it for surgical placement.
ids Simple No Nonsense Lifetime Warranty
ids will replace any ids implant fixture and prosthetic part of any of our
implant systems if you are not satisfied in any way with its performance.
No ifs ands or buts!
The warranty is for the life of the patient should there be a failure to integrate
pre or post prosthetic. In our commitment to continuous improvement of our
products and services, we ask you please help us understand and investigate
the possible reasons you are not satisfied or the integration failure by sending
us the following:
Return the failed product in an autoclaved pouch.
•˃Plastic products should be cold sterilized.
•˃Include your name and contact information.
•˃Product Reference #, Lot #, Serial #, date it was placed and date you
removed it.
•˃Any pertinent patient information.
•˃Pre and post op x-rays.
ids manufacturing design, tolerances and quality control exceed all international
quality standards. We build them better, so we back them better and make it
easy for you.
Tapered Screw-Vent is a registered trademark of Zimmer Dental Inc.
NobelActive is a registered trademark of Nobel Biocare Inc.
idsimplants.com
866-277-5662
19
Reflect
™
S Y S T E M S
REF71015-R0
I M P L A N T
300 Sylvan Avenue, Suite 104, Englewood Cliffs, NJ 07632 866-277-5662
idsimplants.com