2/17/2015
Testing for Halide Ions - Chemwiki
Ashley Robison
My Preferences
Site Tools
Popular pages
MindTouch User Guide
FAQ
Sign Out
If you like us, please share us on social media.
The latest UCD Hyperlibrary newsletter is now complete, check it out.
ChemWiki
BioWiki
Periodic Table of the Elements
GeoWiki
Reference Tables
StatWiki
PhysWiki
Physical Constants
MathWiki
SolarWiki
Units & Conversions
Lab Techniques
ChemWiki: The Dynamic Chemistry E-textbook > Inorganic Chemistry > Descriptive Chemistry > p-Block Elements > Group 17: The Halogens >
Chemistry of the Group 17 Elements > Testing for Halide Ions
Testing for Halide Ions
This page discusses the tests for halide ions (fluoride, chloride, bromide and iodide) using silver nitrate and ammonia.
Using silver nitrate solution
This test is carried out in a solution of halide ions. The solution is acidified by adding dilute nitric acid. The nitric acid reacts with, and removes, other ions that might also form
precipitates with silver nitrate. Silver nitrate solution is then added, and the halide can be identified from the following products:
ion present observation
F-
no precipitate
Cl-
white precipitate
Br-
very pale cream precipitate
I-
very pale yellow precipitate
The chloride, bromide and iodide precipitates are shown in the photograph:
The chloride precipitate is easily identified, but the other two are quite similar to each other. They can only be differentiated in a side-by-side comparison.
All the precipitates change color if they are exposed to light, taking on gray or purple tints.
The absence of a precipitate with fluoride ions is unhelpful unless it is known that a halogen is present; otherwise, it indicates that there is no chloride, bromide, or iodide.
The chemistry of the test
The precipitates are insoluble silver halides: silver chloride, silver bromide or silver iodide. The formation of these is illustrated in the following equations:
Silver fluoride is soluble, so no precipitate is formed.
http://chemwiki.ucdavis.edu/Inorganic_Chemistry/Descriptive_Chemistry/p-Block_Elements/Group_17%3A_The_Halogens/Chemistry_of_the_Group_17_Elements/…
1/3
2/17/2015
Testing for Halide Ions - Chemwiki
Confirming the precipitate using ammonia solution
Carrying out the confirmation
Ammonia solution is added to the precipitates.
original precipitate observation
AgCl
precipitate dissolves to give a colorless solution
AgBr
precipitate is almost unchanged using dilute ammonia solution, but dissolves in concentrated ammonia solution to give a colorless solution
AgI
precipitate is insoluble in ammonia solution of any concentration
An explanation
There are no absolutely insoluble ionic compounds. A precipitate forms if the concentrations of the ions in solution in water exceed a certain value, unique to every compound. This
value is known as the solubility product. For the silver halides, the solubility product is given by the expression:
The square brackets indicate molar concentrations, with units of mol L-1.
If the product of the concentrations of ions is less than the solubility product, no precipitate is formed.
If the product of the concentrations exceeds this value, a precipitate is formed.
Essentially, the product of the ionic concentrations is never be greater than the solubility product value. Enough solid is always precipitated to lower the ionic product to the solubility
product. The table below lists solubility products from silver chloride to silver iodide (a solubility product for silver fluoride cannot be reported because it is too soluble).
AgCl
Ksp
(mol2dm-6)
1.8 x 10-10
AgBr 7.7 x 10-13
AgI
8.3 x 10-17
The compounds are all quite insoluble, but become even less so down the group.
The purpose of ammonia
The ammonia combines with silver ions to produce a complex ion called the diamminesilver(I) ion, [Ag(NH3)2]+. This is a reversible reaction, but the complex is very stable, and the
position of equilibrium lies well to the right. The equation for this reaction is given below:
A solution in contact with one of the silver halide precipitates contains a very small concentration of dissolved silver ions. The effect of adding the ammonia is to lower this
concentration still further. If the adjusted silver ion concentration multiplied by the halide ion concentration is less than the solubility product, some precipitate dissolves to restore
equilibrium.
This occurs with silver chloride, and with silver bromide if the ammonia is concentrated. The more concentrated ammonia pushes the equilibrium even further to the right, lowering
the silver ion concentration even more.
The silver iodide is so insoluble that ammonia cannot lower the silver ion concentration enough for the precipitate to dissolve.
An alternative test using concentrated sulfuric acid
Adding concentrated sulfuric acid to a solid sample of one of the halides gives the following results:
ion present observation
F-
steamy acidic fumes (of HF)
-
Cl
steamy acidic fumes (of HCl)
Br-
steamy acidic fumes (of HBr) contaminated with brown bromine vapor
-
I
some HI fumes with large amounts of purple iodine vapor and a red compound in the reaction vessel
The only possible confusion is between a fluoride and a chloride—they behave identically under these conditions. They can be distinguished by dissolving the original solid in water
and then testing with silver nitrate solution. The chloride gives a white precipitate; the fluoride produces none.
Contributors
Jim Clark (Chemguide.co.uk)
© Copyright 2015 Chemwiki
Unless otherwise noted, content in the UC Davis ChemWiki is licensed under a Creative
Powered by MindTouch ®
http://chemwiki.ucdavis.edu/Inorganic_Chemistry/Descriptive_Chemistry/p-Block_Elements/Group_17%3A_The_Halogens/Chemistry_of_the_Group_17_Elements/…
2/3
2/17/2015
Testing for Halide Ions - Chemwiki
Commons Attribution-Noncommercial-Share Alike 3.0 United States License. Permissions beyond the scope of this license may be available at [email protected].
Questions and concerns can be directed toward Prof. Delmar Larsen ([email protected]), Founder and Director. Terms of Use
http://chemwiki.ucdavis.edu/Inorganic_Chemistry/Descriptive_Chemistry/p-Block_Elements/Group_17%3A_The_Halogens/Chemistry_of_the_Group_17_Elements/…
3/3