ESM 150 - Flat Shoe Milling Device
Independent and straightforward single-step milling
of the flat shoes of Rieter C 60 and C 70 cards
Superior Performance
Graf + Cie AG Bildaustrasse 6 8640 Rapperswil Switzerland
Phone +41 55 221 71 11 Fax +41 55 221 72 33
E-Mail: [email protected] Website: www.graf-companies.com
ESM 150 – Independent, easy milling of flat shoes
with single step clamping of the flat bar
The flat shoes of the cards become worn during the carding
Your advantages:
process and occasionally have to be replaced. In most cases
spinning mills depend on external service providers, which
• Milling flat shoes with single step clamping of the flat bar
replace the sliding shoes and readjust them to a uniform height.
• The quality of the flats remains in your own hands
Graf offers a compact, simple machine for this purpose.
• Low capital costs
• Easy operation
• Compact, slim machine (210 kg)
High quality in a single step
By reworking the flat shoes with only a single step clamping of the
flats, the shoes can be refinished very accurately and rapidly. The
finishing range is within a few hundredths of a millimeter. Precision of
flats therefore remains in the mill’s own hands.
Technical data ESM 150
Easy operation
The ESM 150 has been designed for easy use by your personnel.
Length
Width
Height
Weight
Power supply
1990 mm
490 mm
450 mm
210 kg
110 V / 220 V / 400 V
Small and compact
The ESM 150 shoe milling machine is small and compact in design.
Essential features of the ESM 150
Refinishing with only a single step clamping, low capital costs,
independence of service providers and easy operation make the
ESM 150 very attractive, even for smaller spinning mills.
Scope of delivery
Delivery includes a reference flat bar and detailed operating
instructions. An emergency kit with two precision milling cutters
ESM 150 with flat bar
ESM 150 without flat bar
and a toothed belt can also be ordered.
The following details are required to ensure rapid and reliable order
processing: Article No.: 40017951, Card type (C 60 or C 70)
Premium Swiss Quality
The data and illustrations in this brochure refer to the date of printing. Graf reserves the right to make any
necessary changesat any time and without special notice. Graf high-performance clothings, service machines
and Graf innovations are protected by patents.
Version 1015 EN / © Copyright by Graf
Necessary ordering details