PATTEX SUPER GLUE
DESCRIPTION
Medium viscous adhesive based on
ethyl cyanacrylate.
TECHNICAL SPECIFICATIONS
Raw material
: Ethyl canoacrylate
: 10-20 N/mm²
Final strength
Density
: Approx. 1,05 g/cm³ (at
+20)
Safety
: Xi= irritant
Viscosity
: 25-100 m Pa.s
: Non-flammable
Flash point
Shelf life
: 12 months
SCOPE OF USE
Pattex Super Glue for instant repairs
in household, model construction,
workshop and cars. Strong and fast
bonding of many materials such as
rubber, metal, ceramics, leather, fabrics,
paper, porcelain, plastics (e.g. PVC,
ABS, polystyrene), cork and cardboard.
Not suitable for bonding polypropylene,
expanded polystyrene, Teflon®,
synthetic fabric, rear-view mirrors. Not
gap-filling proprieties.
CHARACTERISTICS
Instant bonding strength
High-fluid runs even into tiny gaps
Efficient for many materials
Shock resistant formula
Extra strong permanent bond
Porous or non-porous surfaces
APPLICATION INSTRUCTIONS
Surfaces to be glued must be clean, dry and free from
grease. Apply a thin layer of Pattex Super Glue. Join both
surfaces immediately and press firmly for 10-60 sec. Pattex
Super Glue should be stored in a cool, dry place.
SALES INFORMATION
Product Name
Pattex Super Glue
Pattex Super Glue Multicard
(Brazil)
MOQ (in
Pack Details
pcs)
1343063 20,160
24 x 3g
IDH
1320300
28,880
10 x 12 x 3g
PATTEX REPAIR EPOXY
DESCRIPTION
Bi component product. Epoxy resin &
hardness.
SCOPE OF USE
Pattex Repair Epoxy is a universal
glue for repairing, bonding, filling and
sealing many materials. Quick and
secure welding of many materials such
as metals, wood, glass, ceramics,
cement, marble and diverse types of
plastics (except PE,PP and Teflon®).
Molding all kind of supports: artistic
parts, statues, vases and industrial
parts, can be painted.
Fixing parts and objects: shelves,
screws, mailboxes, antennas, etc.
Sealing iron pipes, gutters etc. and
repairing broken corners of stairs,
furniture etc.
CHARACTERISTICS
Over paintable
Extremely resistant to water, grease,
solvent, vibration and shocks
Resistant to extreme temperature (30°C to +120°C)
Without shrinking or dilatation
Insulator
Easy to use
TECHNICAL SPECIFICATIONS
: Bi component product.
Aspect
Compact homogeneous
mass
: Resin bar: White /
Colour
Hardener bar: Dark Grey
Penetration (25°C/150g/10 : Resin: 90-120. Hardener:
90-118
second) mm
: 69-120 minutes
Curing time 25°C -TFT
: Good, malleable
Malleableness Mix
: Malleable grey mass
Aspect after mixture
: 40-50 minutes
Holding time
: Dark grey hard mass
Cured aspect
: -50°C to + 150°C
Thermal resistance
(intermittent)
: 70
Shore D hardness
: 24 months
Shelf life
APPLICATION INSTRUCTIONS
Surfaces to be treated must be clean and free of dust,
grease or oil. Knead the two bars (white and grey) together
to obtain a homogeneous mix. Apply and level with fingers
or a wet tool to obtain a smooth surface. Wait at least 12
hours before painting and sanding. After use, put the two
bars in original packaging to ensure better storage.
SALES INFORMATION
Product Name
Pattex Repair Epoxy
MOQ (in
Pack Details
pcs)
1301339 24,000
12 x 50g
IDH
PATTEX CONTACT ADHESIVES
TECHNICAL SPECIFICATIONS
Density
Application temperature
Open time
Evaporation time
Initial strength
DESCRIPTION
Single component, polychloprene based
contact adhesive.
SCOPE OF USE
It is used for wood and decorative laminates,
rubber, leather, cork, felt, rigid PVC, soft foams,
bonding veneer strip to edges and curves, fixing
sound-proofing, insulating and acoustic panels
and tiles (with the exception of expanded
polystyrene) to dry, stable surfaces, sealing
edges to protect from moisture and weather
conditions, on solid and plywood and for fitting
sealing strips. It is not suitable for expanded
polystyrene, plasticized PVC synthetic or
leather.
Viscosity
Temperature resistance
Minimum pressure
Colour
Shelf life
:
:
:
:
:
:
:
:
:
:
:
0.89 kg / l
5°C to 40°C
20 minutes (18-20°C
15 minutes
30-40 % of the last
adherence force
1600 m Pas
-20°C to 90°C
0.5 N / mm²
Beige, Transparent
12 months in cool and
dry place (at 20°C)
CONSUMPTION
250-350 gr/m²
CHARACTERISTICS
APPLICATION INSTRUCTIONS
Materials to be bonded must be dry, clean and free of grease and laminate
surfaces must be sanded. Metal surfaces must be cleaned with benzene.
Apply Pattex contact on both sides by using a spatula or a short brush.
Prior to bonding the surfaces together, ensure that are they are aligned as
required. Once the two films of adhesive come together, their alignment can
no longer be corrected.
Resistant to heat
High initial and final strength
Resistant to water, soda, acid and petroleum
SALES INFORMATION
Product Name
Pattex Tube Contact Adhesive 50g
Regular
Pattex Tube Contact Adhesive 50g
Transparent
Pattex Contact Adhesive
Pattex Contact Adhesive Tin
Pattex contact Adhesive Can
IDH
MOQ
Pack details
1411119 11,520 pcs.
60 x 50g
1411122 11,520 pcs.
1411117 4,680 pcs.
1411116 1,440 pcs.
1367966 432 pcs.
60 x 50g
24 x 250 ml
24 x 750 ml
4 x 3.7 ltr
PATTEX WOOD GLUE
TECHNICAL SPECIFICATIONS
Application temperature
Joint properties
DESCRIPTION
Synthetic resin glue based on polyvinyl
acetate.
Viscosity
Dry extract
Open Time
Fastening time
Colour
Shelf life
SCOPE OF USE
Pattex wood glue classic is a ready-to-use
and dries transparent. For assembly bonding
applications (carcass bonding), for joints (solid
wood and board joints), veneer and plastic edge
banding, except PVC, ABS and polyester
edging no untreated or not sanded on rear side.
APPLICATION INSTRUCTIONS
Surfaces must be clean, dry and free of grease. Apply by brush or roller
gluing a thin and regular layer on one surface to be bonded, for heavy wood
apply on both surfaces. Join the two parts during the open time and apply
pressure of 2 to 5 kg/ cm² during the appropriate fastening time. Pressing
can either be hot or cold with the usual tool appliances.
Universal for all types of wood
High bonding strength
SALES INFORMATION
Product Name
Do not apply below 4°C
Elastic, tool-friendly,
ageing-resistant.
9000± 10000 mPa.s
24-26%
18-20 min
approx. 90 min
White
12 months
CONSUMPTION
150 gr/m²
CHARACTERISTICS
Pattex Classic Bottle
Pattex Classic Bucket
Pattex Classic Bucket
Pattex Classic Bucket
Pattex Classic Bucket
Pattex Classic Bucket
Pattex Classic Bucket
:
:
:
:
:
:
:
:
:
IDH
1485236
1485235
1485237
1485238
1485239
1485240
TBA
MOQ
Pack details
TBA
TBA
TBA
TBA
TBA
TBA
TBA
500 g
1 kg
4 kg
5 kg
10 kg
20 kg
30 kg
PATTEX SANITARY SILICONE
TECHNICAL SPECIFICATIONS
Application temperature
:
Skin Formation
:
Track Free time
:
Curing time per 5 mm for a :
joint of 10 mm x 20 mm
Shore A hardness
:
Colour
:
Volume shrinkage
:
Elastic recovery
:
Shelf life
:
DESCRIPTION
Acetoxy Silicone
SCOPE OF USE
Pattex Sanitary Silicone is an acetoxy
sealant, single component, ready-to-use
for sanitary applications, in hot and humid
environment such as kitchens, bathrooms,
where resistance to fungal growth is
necessary. It cures at ambient temperature
in the presence of air moisture to give a
strong, flexible watertight seal with low
modulus of elasticity. It adheres without
primer to glass, ceramics, vitreous,
painted surfaces and anodized aluminum.
SALES INFORMATION
Pattex Sanitary Silicone 3S
White
Pattex Sanitary Silicone 3S
Transparent
IDH
approx. 2-3 days
approx. 20
White, Transparent,
< 25%
> 95%
24 months
APPLICATION INSTRUCTIONS
Pattex Sanitary silicone bonds well to most clean surfaces. Use a
primer for better adherence on steel, ferrous metals, thermoplastic
materials, concrete, stone and wood. For very porous material apply a
second layer of primer. To obtain neat edges, mask the edges with tape.
Apply ensuring that the seal is completely filled. Smooth with a dry
spatula, to ensure good contact.
CHARACTERISTICS
Fast curing
Superior adhesion
Flexible watertight seal
Excellent mildew resistance, contains
fungicide.
Resistance against cleaning products
and many other chemicals
Resistance to extreme temperature (30°C to 120°C.
Product Name
5°C to 40°C
approx. 15 min
approx. 20 mins
MOQ
Pack Details
1352819 2,600 pcs.
25 x 280 ml
1366974 2,600 pcs.
25 x 280 ml
PATTEX SMART UNIVERSAL
DESCRIPTION
Acetoxy Silicone
TECHNICAL SPECIFICATIONS
Specific gravity
Application temperature
Flow resistance
Curing time per 5 mm
SCOPE OF USE
Pattex Smart Universal is an acetoxy silicone
sealant, single component, ready-to-use for
universal bonding and sealing applications. Fast
and strong bonding on many materials such as:
glass, ceramic tiles, glazed surfaces, anodized
aluminum and plumbing fixture or cold rooms.
Bonds without primer on glass, ceramic, painted
surfaces and aluminum.
Extrusion rate
Temperature Service
Shore A hardness
Colour
Volume shrinkage
Elastic recovery
Shelf life
CHARACTERISTICS
Rapid curing, high bonding
Flexible and waterproof joints
Resistance against cleaning products and
many other chemicals
Excellent resistant against ageing and
extreme temperatures
For indoor applications
Safe and easy to use
:
:
:
:
:
:
:
:
:
0.94 kg / l
5°C to 40°C
1 mm
For a joint of 20 mm x
10 mm: 2 to 3
3100 g/min
-30°C to 120°C
approx. 11
White, Transparent,
black, Grey and Beige
: < 45%
: > 90%
: 24 months
APPLICATION INSTRUCTIONS
Pattex Smart Universal bonds well to most clean surfaces. Use a
primer for better adherence on steel, ferrous metals, thermoplastic
materials, concrete, stone and wood. For very porous material apply
second layer of primer. To obtain neat edges, mask the edges with tape.
Apply ensuring that the seal is completely filled. Smooth with a dry
spatula, to ensure good contact.
SALES INFORMATION
Product Name
Pattex Smart Universal cartridge
White
Pattex Smart Universal cartridge
Transparent
Pattex Smart Universal cartridge
Grey
Pattex Smart Universal cartridge
Black
Pattex Smart Universal cartridge
Beige
IDH
MOQ
Pack details
1352819 2,600 pcs.
25 x 280 ml
1366975 2,600 pcs.
25 x 280 ml
1428178 2,600 pcs.
25 x 280 ml
1431222 2,600 pcs.
25 x 280 ml
1474307 2,600 pcs.
25 x 280 ml
PATTEX ACRYLIC SEALANT
DESCRIPTION
Acrylic dispersion
TECHNICAL SPECIFICATIONS
Application temperature
Curing time
Shore A hardness
Density
E 100 module (100 %)
Temperature resistance
Shrinkage
Permanent elasticity
Max. joint width
Shelf life
SCOPE OF USE
Pattex acrylic sealant is an acrylic dispersion
based sealant used for expansion joints
between precast building materials and
prefabricated building elements. For indoor and
outdoor, for all kinds of joints and cracks, for
assembling all kind of frames (wood, iron and
aluminum), side coating plates and eternit
aluminum roof with most building materials.
:
:
:
:
:
:
:
:
:
:
18°C to 40°C
15 minutes
20
1.5 g / ml
5 N/ cm²
-20°C to 80°C
18%
10%
30 mm
12 months
APPLICATION INSTRUCTIONS
Joints must be clean, dry and free from grease. After the sealant is
applied into the joint it should be smoothed with a wet spatula. The
surfaces should be prevented from water and rain until complete curing.
CHARACTERISTICS
Single component
Indoor and outdoor applications
Overpaintable
Permanently elastic
Resistant to ageing
SALES INFORMATION
Product Name
Pattex Acrylic Sealant
IDH
1387333
MOQ
Pack details
13,600 pcs 20 x 280 ml
PATTEX PU SEALANT
DESCRIPTION
Polyurethane Sealant
TECHNICAL SPECIFICATIONS
Skin formation time
Application temperature
Resistance to dripping
Elastic recovery
Shore A hardness
Specific gravity
Modulus
Shore A hardness
Elongation at break
SCOPE OF USE
Pattex PU sealant is a single component,
elastomeric polyurethane, medium modulus
sealant for expansion joints. Delivers flexible and
resistant joint with very good adhesion on most
building supports: concrete, mortar, glass,
anodized aluminum, wood…etc.
Movement capacity
Service temperature
Colour
Shelf Life
CHARACTERISTICS
Moisture curing, chemical resistance
Indoor and outdoor applications
High bonding strength
Good elasticity
Over paintable
UV, ageing and weather resistant
:
:
:
:
:
:
:
:
:
:
:
:
:
:
60 min
5°C to 40°C
3 mm
> 70 %
25-30
1.3 g/cm³
0.25-0.30 Mpa
25-30
> 250 %
25%
-20°C to + 80%
White
12 months
APPLICATION INSTRUCTIONS
Joint 6 to 40 mm: Use a primer on mortars type M1, Protect joint edges. Small
width: 1 layer of sealant, Large width: 3 layers (2 onto the edges and the third onto
the bottom). Smooth with clean water. Bonding: Fix the materials by exercising a
manual pressure and maintain during first hours of curing. Heavy materials (>8
kg/m²) must be supported during 8 or 15 hours. Can be painted after curing.
SALES INFORMATION
Product Name
Pattex PU Sealant
IDH
MOQ
1405379 2,600 pcs.
Pack Details
12 x 300 ml
PATTEX FIX & FILL PU FOAM
DESCRIPTION
Professional PU Foam
TECHNICAL SPECIFICATIONS
Application temperature
Curing time
Elongation
Density
Tensile strength
Shear strength
Compressive strength
SCOPE OF USE
Pattex Fix & Fill is a multi-purpose PU foam
that cures to a durable semi-rigid structure within
2-4 hours under influence of air humidity. For
filling, bonding, sealing many materials: Sealing
joints around windows and doors, insulating hot
and cold water pipes, filling large cracks, holes,
joints and openings, bonding and sealing
windows and door frames.
SALES INFORMATION
Product name
5°C to 25°C
15 to 20 minutes
25%
17 + 2 kg/m³
9 N / cm²
5 N / cm²
4 N / cm²
APPLICATION INSTRUCTIONS
Clean surfaces. Protect adjacent surfaces with tape or plastic film. Moisten
substrates and freshly extruded foam for best result. For multi-layer application,
moisten each layer. Shake vigorously 20 times. Screw nozzle onto valve. Hold can
upside down with tube pointing onto spray surfaces. Apply economically as foam will
expand from its original extruded volume. Protect the applied foam from sunlight by
appropriate covering.
CHARACTERISTICS
Fills cavities completely
Excellent insulation
Highest foam stability
No shrinkage - no post expansion
Excellent adhesion on different surfaces
Can be painted, sanded and plastered.
Pattex PU foam
Pattex PU foam
:
:
:
:
:
:
:
IDH
MOQ
Pack details
TBA
TBA
10,000 pcs
10,000 pcs
300 ml
750 ml
PATTEX NO MORE NAILS
DESCRIPTION
Solvent technology
TECHNICAL SPECIFICATIONS
Initial tack
Application temperature
Open time
Temperature resistance
Final Strength
Temperature resistance
Setting time
Coverage on flat surfaces
Shrinkage
Shelf life
SCOPE OF USE
Pattex NO MORE NAILS PL 600 is an
INSTANT TACK© solvent based professional
adhesive for indoor and outdoor use which
bonds a broad range of substrates including
brick, ceramic, concrete, hardboard,
plasterboard, plywood, stone, MDF, UPVC
and many other plastics. Delivers immediate
bonding to substrate without flashing or
additional steps or waiting.
:
:
:
:
:
:
:
:
:
:
Approx. 12 g/cm²
-10°C to 35°C
Approx. 10 mins
-20°C to 80°C fully cured
5 to 6 N/mm²
-20°C to 80°C fully cured
48 h
Approx. 300g/m²
Approx. 25%
18 months
APPLICATION INSTRUCTIONS
Apply adhesive onto one of the surfaces: In spots in order to smooth
uneven surfaces, in wave-like form for higher initial tack with wide
surfaces or in straight strands for smaller surfaces. In case of outdoor
use or in rooms with high moisture, apply vertical strands. Release the
trigger on the gun after each application to prevent the adhesive from
flowing.
CHARACTERISTICS
INSTANT TACK© solvent based formula
(do not flash solvent)
No need to support joints with mechanical
fixings
Outdoor and indoor use, low odor
Over paintable once dry and water resistant
For porous and non-porous surfaces
Easy application at low temperature -10°C
SALES INFORMATION
Product Name
Pattex No More Nails
IDH
MOQ
884842 3,600 pcs.
Pack details
12 x 300 ml
PATTEX NO MORE NAILS PL50
DESCRIPTION
Dispersion technology
TECHNICAL SPECIFICATIONS
Raw material
Application temperature
Open time
Temperature resistance
Final Strength (DIN EN 205)
Initial tack
Setting time
Coverage on flat surfaces
Shrinkage
Shelf life
SCOPE OF USE
Pattex NO MORE NAILS PL 50 is a
dispersion based professional adhesive with
a good initial tack and designed specifically
for indoor use. Pattex NO MORE NAILS PL
50 replaces nails and screws on several
surfaces such as: wood, metal, concrete,
hardboard, plasterboard, plasterboard,
plywood, MDF, polystyrene, UPVC, many
plastics, brick and stone.
SALES INFORMATION
Pattex No More Nails PL50
IDH
Dispersion
+10°C to 40°C
Approx. 15 mins
-20°C to 70°C
5 to 6 N/mm²
8-10 g/cm²
48 h
Approx. 300g/m²
Approx. 20%
18 months
APPLICATION INSTRUCTIONS
Panels: Place panel 1-2 cm off the bonding spot, then slide into
correct position and press well. Heavy materials can be supported with
decorative nails. For uneven surfaces create a mechanically fixed subconstruction.
Fastening of door frames: Insert door frame, adjust and wedge the
upper side. Apply PL 50 to 3 spots on each side in height of the
mountings. If gap size between walls and frame is more than 2 cm, fix
distance blocks before inserting the frame.
CHARACTERISTICS
Solvent-free dispersion formula, low odor
No need to support bonded material with
mechanical fixings
Universal adhesion properties
Over paintable once dry
High adhesion especially wood to wood
Gap filling up to 10 mm
Product Name
:
:
:
:
:
:
:
:
:
:
MOQ
1184274 2,400 pcs
Pack details
12 x 300 ml
TANGIT PVC PIPE CLEANER
DESCRIPTION
Tangit Cleaner cleans glued joints made of
PVC-U, PVC-C and ABS
SCOPE OF USE
Used to clean the surfaces before bonding
pipes with Tangit PVC-U special adhesive.
TECHNICAL SPECIFICATIONS
Raw material
:
Density
Flash Point
Shelf Life
:
:
:
Acetone and methyl
ethyl ketone
0.8 g/ml
-4°C
12 months
APPLICATION INSTRUCTIONS
The surfaces to be bonded must be cleaner of heavy dirt. Now the final cleaning is
done using Tangit Cleaner. Spray the cleaner onto a piece of white, non-staining soft
paper and thoroughly clean the dry surfaces. Use a new piece of tissue paper for
each cleaning operation. The surfaces cleaned with Tangit Cleaner must be dry
before applying the adhesive. Any ice must be removed by careful heating.
CHARACTERISTICS
Safe and reliable bonding when used with
Tangit pipe adhesives
Prevents leakage problems
High purity – dries without residue
Reliably removes residues and soiling
SALES INFORMATION
Product name
Tangit Cleanser
IDH
MOQ
44271 288 pcs.
Pack details
12 x 1 Ltr
TANGIT PIPE ADHESIVE
DESCRIPTION
Tangit is a PVC-U based adhesives for
PVC pipes and fittings
TECHNICAL SPECIFICATIONS
Raw material
:
U-PVC,
tetrahydrofurane, (THF
stabilized), methyl ethyl
ketone, cyclohexanone
SCOPE OF USE
Tangit U-PVC MP is suitable for joints
resistant to shear strain of pressure pipes PN6
(e. g. drinking water) with UPVC, for gluing
cable conduits, drain pipes etc.
Density
Viscosity
Gap filling properties
Open time
Shelf life
:
:
:
:
:
0.92 g/ml
500-1500 mPa.s
17 + 2 kg/m³
4 minutes
12 months
CHARACTERISTICS
Fast curing, maximum leak protection
Excellent gap- filling proprieties
Hot and cold water pipes (60°C)
Medium pressure (6 bars)
Resistant to bacteria
APPLICATION INSTRUCTIONS
Cut off the pipe end at right angles, chamfer it from outside and deburr it. Clean
surfaces with Tangit Cleaner. Stir and apply it lengthwise on both sides with a paint
brush, join the pipe and socket without twisting within the open time and hold fast for
several seconds. Do not expose to mechanical stress for 5 min. Waiting time before
pressure test: 24 hours for new installations, 1 hour per bar for repair work.
SALES INFORMATION
Product name
Tangit Special Adhesive tube
Tangit Special Adhesive
Tangit Special Adhesive tin
Tangit Special Adhesive tin
Tangit All Pressure
Tangit All Pressure
IDH
MOQ
Pack details
182753
414546
44354
406517
333455
406488
1,440 pcs
2,400 pcs
648 pcs
360 pcs
2,592 pcs
288 pcs
125 gr x 12
250 gr x 12
500 gr x 12
1 kg x 12
500 gr x 12
1 kg x 12
TANGIT UNI-LOCK
DESCRIPTION
Thread sealing cord,
TECHNICAL SPECIFICATIONS
Pressure resistance
Temperature resistance
Yield
Curing time
SCOPE OF USE
APPLICATION INSTRUCTIONS
If necessary, clean the metallic threads with a brush. Thread
the reel in the direction in which it turns, starting from the end of
the pipe.
CHARACTERISTICS
Hot and cold water up to 7 bar (-20 ºC to
+130 ºC)
Natural gas (city gas), butane, propane,
compressed air up to 16 bar
Plastics such as PVC-U, PVC-C, PP and
PE
Metals (steel, copper, cast iron, brass, RVS
and aluminum)
Diameters up to 6”
SALES INFORMATION
Tangit Uni-Lock Thread Sealant
Tangit Uni-Lock Thread Sealant
Tangit Uni-Lock Thread Sealant
IDH
Max. 16 bar
- 20°C up to +130°C
approx. 200 jobs
None
COMPOSITION
Nylon thread, silicone
Unilock is a reliable seal for screw-thread
connections. The product is quick and clean
to use. A few turns are all that's needed.
Unilock is made of multiple nylon threads
soaked in a silicone solution. It is vibrationand weather-resistant and comes in a
compact holder containing 80 or 160 meters
of thread.
Product name
:
:
:
:
MOQ
382913 12,096 pcs.
320287 2,100 pcs.
634243 2,100 pcs.
Pack details
20 m
80 m
160 m
METYLAN NORMAL
TECHNICAL SPECIFICATIONS
Viscosity (mix ratio 1:50 after 30 min.)
DESCRIPTION
High valued MC (Methyl cellulose) based
wallpaper Adhesive
: 8.400-9.300
mPas
: max. 9%
: 310 - 360 g/l
: Dissolved with
cold
: 12 months
Bulk density
Solubility
SCOPE OF USE
Metylan normal is used for bonding
normal wall paper, light paper and heavy.
Shelf life
APPLICATION INSTRUCTIONS
The surfaces must be dry, smooth, clean and free from old paper.
Very absorbent surfaces should be primed with priming coat in rate of
1:80. The contents of the package is mixed After waiting for 2 to 3
minutes, it is stirred again strongly.
Adhesive is applied homogenously by using a brush and the paper is
allowed for 5 to 10 minutes to become soft. Then bonding application
is carried out.
CHARACTERISTICS
High resistance to humidity
Dries crack free, even in larger layers
Adapts to heat changes, compatible with
limestone and cement
Easily mixed and covered
Mixture approach:
For
Mix ratio
Sizing,
thickening
light
wallpaper
Normal
wallpaper
Heavy
wallpaper
Quantity of
cold water
Approximate coverage
M²
Rolls
1:80
10
100
-
1:70
8¾
50
10
1:60
7½
40
8
1:50
6¼
30
6
SALES INFORMATION
Product name
Metylan Normal
IDH
MOQ
72181 1,560 pcs.
Pack details
125 g x 40
METYLAN SPECIAL
DESCRIPTION
High valued MC (Methyl cellulose) and
synthetic resin
TECHNICAL SPECIFICATIONS
Viscosity (mix ratio 1:20 after 30 min.)
: 100.000-13.000
mPas
: 500-600 g/l
: approx.15
minutes in cold
: 12 months
Bulk density
Solubility
SCOPE OF USE
Metylan Special is suitable for
heavyweight paper, printed paper, (wood,
cork, jute, silk, woven etc.), photo printed
paper, textile paper, flawed paper as well
as peel able paper.
Shelf life
APPLICATION INSTRUCTIONS
The surfaces must be dry, smooth, clean and free from old paper.
Cracks and hollows should be covered.Very absorbent surfaces
should be primed with priming coat in rate of 1:40. The contents of the
package is mixed. After waiting for 2 to 3 minutes, it is stirred again
strongly. Now, Metylan Special is ready to use.
For papers and flok paper: Adhesive is applied homogenously by
using a brush and paper is allowed for 5 to 10 minutes to become soft.
Then bonding application is carried out.
For embossed and vinyl coated paper: Bonding application is
carried out the same way and then the air between the wall and the
paper is removed by using a roller or a spatula.
CHARACTERISTICS
High resistance to humidity
Can be smoothened during bonding
Adapts to heat changes, compatible with
limestone
Dissolving ratio based on 200 g:
For
Mix ratio
Quantity of
cold water
(litre)
Sizing
1:40
8
60-80
-
Wallpaper
Woodchip
22-26
22-26
5-Apr
appr. 2
SALES INFORMATION
Product name
Metylan Special
IDH
MOQ
Pack details
72201
1,560 pcs.
200 gr x 40
1:20
1:20
4
4
Sufficient for app.
M²
Rolls
METYLAN DUFIX- CRACK FILLER
DESCRIPTION
Gypsum based inorganic filler for interior
use
TECHNICAL SPECIFICATIONS
Working Time
Application Temperature (air
and background)
Quantity
SCOPE OF USE
Metylan Dufix is used to fill cracks.
Shelf life
SALES INFORMATION
Metylan Dufix-Crack Filler
IDH
: 900 g per m² and mm
thickness, the quality
depends on the
application.
: 12 months
APPLICATION INSTRUCTIONS
Surface preparation:
Remove any loose material, old layers of distemper, wallpaper, dirt,
grease, wax and oil e.g. mould oil. The surfaces must be dry,
absorbent, sound, clean and dust-free. Roughen smooth surfaces.
With very absorbent surfaces e.g. gas concrete blocks, first dampen
or preferably prime. If the surface is hardly absorbent, a bonding
agent must be applied. We recommend that a moisture test is
carried out before starting. and the paper is allowed for 5 to 10
minutes to become soft. Then bonding application is carried out.
Product application:
Mix 1.5 parts Filler to 1 part clean water. We recommend that the
water is added to the mixing vessel first. To achieve a lump-free
consistency, it is best to leave it to soak for about 2 mins. Apply with
filling knife or plasterer’s trowel. It is possible to smooth the surface
as soon as the filler begins to set. The surface must be damped
slightly.
CHARACTERISTICS
Easy to sand and mix
Dries crack free, even in larger layers
Air and moisture permeable
Non-toxic, non-corrosive
Product name
: Ready mix filler is
workable for about 60
: above + 5 °C
MOQ
Pack Details
83001 11,300 pcs. 1.5 kg x 10
NITRO MORS ALL PURPOSE
DESCRIPTION
Nitro Mors All Purpose Paint & Varnish remover
is a thickened blend of acetals and hydrocarbon
solvents with surfactant, activator, paraffin wax
evaporation retardant, corrosion inhibitor and
green dye.
TECHNICAL SPECIFICATIONS
Rheology
:
SCOPE OF USE
New Nitro Mors All Purpose Paint & Varnish
Remover is a dichloromethane free, fast acting
and highly effective paint and varnish remover.
The viscous, semi-gel non drip formulation makes
it ideal for use on both vertical and horizontal
surfaces giving thick even application with deep
penetration and prolonged effectiveness. New
Nitro Mors All Purpose removes up to twice the
number of paint layers per application compared
to traditional paint and varnish removers.
It is non-acid and non-caustic. Nitro Mors contains
a non staining green dye to help users see where
product has been applied.
Temperature range
:
Working time
:
Coverage
:
Shelf life
:
SALES INFORMATION
Nitro Mors non-MC All Purpose PG&E
Nitro Mors Non-MC All Purpose PG&E
IDA
1392896
Time required for
penetration/eruption of
coatings to be removed
dependent on coating
type, thickness and age.
Apply, wait for coating to
blister (5-20 minutes), reapply and leave for 40
minutes before scraping
off.
750ml of Nitro Mors All
Purpose Paint & Varnish
Remover covers up to
2m² (approx. 1 door
12 months
APPLICATION INSTRUCTIONS
Apply it the same as if painting the wood. Using a brush cover the wood
with a fine layer, not too thick then leave the wood for five minutes.
During these five minutes the paint begins to blister a little. Once the five
minutes are up apply another coating of Nitro Mors to the same area, this
time working the liquid more into the blisters themselves. Once the area has
been treated, leave for twenty minutes.
CHARACTERISTICS
Strips more layers of paint per application.
Green colour indicator
Non drip application
Low evaporation rate
Fast and effective
Easy wash off
Tough on paint, kind to wood and strips up to
15 layers
Product name
Approx.5000 mPas at
20 °C
5 °C - 30 °C
MOA
Pack
Details
4,000 pcs. 2L x 4
1392894 3,000 pcs. 4L x 2