®
AMMONIUM SULFATE SOLUTION
SURFACTANT BLEND
BRONC ® Plus is a proprietary blend of
ammonium sulfate solution and surfactant with
nonionic properties.
• Specially formulated to be used with
many postemergence herbicides
• Enhanced sequestering to block mineral
tie-up of glyphosate
• Filtered through a special process to
remove impurities and other contaminants
• Reduces nozzle plugging, wear and
corrosion of equipment
• Contains a proprietary surfactant blend
for increased spreading
INFORMATIONAL USE ONLY, NOT A LABEL • (800) 500-1698
May not be available in all states. Please contact your Wilbur-Ellis representative for product availability and registration.
GENERAL INFORMATION
BRONC Plus is a proprietary blend of ammonium
sulfate solution and surfactant with nonionic
properties. BRONC Plus is specially formulated to
be used with many postemergence herbicides, which
perform best when mixed with ammonium sulfate and
require the addition of a nonionic surfactant.
BRONC Plus is filtered through a special process to
remove impurities and other contaminants generally
associated with dry or other liquid ammonium sulfate
products. This lack of sedimentation reduces nozzle
plugging, wear and corrosion of equipment.
NOT FOR AQUATIC USE
SUGGESTIONS FOR USE
Bronc Plus should be used to improve the
performance of postemergence herbicides where
an ammonium nitrogen-based product is required.
Generally, use 3.0 to 6.0 gallons of BRONC Plus
per 100 gallons of spray solution.
3 gallons / 100 BRONC Plus = 8.5 pounds dry
Ammonium Sulfate
6 gallons / 100 BRONC Plus = 17 pounds dry
Ammonium Sulfate
All ingredients in this product are exempt from the
requirements of a tolerance.
DO NOT ALLOW THIS PRODUCT TO FREEZE.
ALWAYS READ AND FOLLOW ALL DIRECTIONS
ON THIS LABEL AND THE LABEL OF THE
HERBICIDE BEING USED.
www.wilburellis.com
WILBUR-ELLIS Logo, Ideas to Grow With and BRONC are registered trademarks of Wilbur-Ellis
Company. F-407-2 K-0811-630