WHEATON
®
Containers Guide
Strength through knowledge,
knowledge from experience
www.wheaton.com
Glass & Plastic Containers
Glass Bottles
WHEATON offers over 3,000 containers and closures from borosilicate to
soda-lime glass. Each container has an assortment of caps and liners to
choose from. We are able to provide small case quantities of containers
as well as large bulk packs. We also offer the ability to customize your
order to meet all your needs. In addition, WHEATON offers convenience
bulk packs of containers with or without caps attached for high use items
or facilities with centralized stockrooms. Tamper Evident Seal / HAZCOM
Label provided in each case of bottles with the exception of bulk packs.
The United States Pharmacopeia classifies pharmaceutical glass containers
according to their resistance to water attack, also referred to as chemical
durability. Containers are classified as Type I, II, and III. Type I is the
most durable glass, and Type III is the least durable glass. Test methods
and specification limits for determining the chemical resistance of glass
can be found in the current revision of the U. S. Pharmacopeia, section
<660> Containers. Most of the glass containers offered by WHEATON are
manufactured from either Type I borosilicate or Type III soda-lime glass.
Glass in the USP Type I classification are borosilicate glass with superior
chemical resistance. This class of glasses represents the least reactive glass
containers available. Typically, this glass can be used for most applications,
including packaging for parenteral and non-parenteral products. Type I glass
may be used to package acidic, neutral and alkaline products. Water for
injection, un-buffered products, chemicals, sensitive products and those
requiring sterilization are commonly packaged in Type I borosilicate glass.
Type I glass can be subject to chemical attack under certain conditions,
thus container selection must be made carefully for very low and very
high pH applications.
USP Type III is a soda-lime glass with moderate chemical resistance. It is
typically acceptable for packaging dry powders that will be dissolved into
solutions or buffers that are insensitive to alkali. Type III glass may not
be suitable for autoclaved products because the autoclaving process will
accelerate the glass corrosion reaction. Dry heat sterilization processes
are typically not a problem for Type III containers. Light sensitive products
must be packaged in amber glass. Amber glass is formulated to absorb
light in the Ultra Violet region of the electromagnetic spectrum.
Plastic Bottles
Plastic containers have been developed for a variety of applications across
many different industries over the years. There are many different types of
polymers used in the creation of these containers to help fill the demands
for the various applications. Polymers offer a variety of properties, each
having different levels of importance with different users depending on the
application. Some users may have flexibility within their product formula or
filling process and therefore focus on economical containers while others
may need containers that are stronger, autoclavable, transparent, sterilized,
etc., therefore requiring more specifications. WHEATON can help with
polymer selection through comprehension of the customer’s product, goals,
and adaptability.
For more information on WHEATON Plastic Bottles, contact your Area Sales
Manager.
Table of Contents
General Purpose Glass Bottles
> Boston Round Bottles................................................................. 6
> Replacement Caps for Boston Round Bottles............................... 7
> French Square Bottle.................................................................. 8
> Replacement Caps for French Square Bottles.............................. 8
> AC Round Bottle......................................................................... 9
> Reagent Bottle, Wide Mouth....................................................... 9
> Reagent Bottle, Narrow Mouth.................................................... 9
> Reagent Bottle, Screw Cap......................................................... 9
> Wide Mouth Packer, Amber...................................................... 10
> Replacement Caps for Wide Mouth Packers ............................. 10
> Valumetric™ Graduated Bottle, Clear........................................ 11
> Replacement Caps for Valumetric™ Graduated Bottles.............. 11
> Media Bottle, Lab 45™ Graduated Bottles................................ 12
> Accessories, Lab 45™ Media Bottles....................................... 12
> Media Lab Bottle, Graduated.................................................... 13
> Media Lab Bottle, Non-Graduated............................................. 13
>Replacement Black Phenolic Screw Caps for Media Bottles........ 13
> Standard Wide Mouth Bottle, Clear........................................... 14
> Reservoir, High Capacity........................................................... 14
> Dropping Bottle, All Glass......................................................... 14
> Straight Sided Jar, Clear........................................................... 15
> Replacement Caps for Straight Sided Jars................................. 15
> Replacement Caps for Standard Wide Mouth Bottles................. 15
> Safety Coated Bottle................................................................ 16
> Safety Coated Jar..................................................................... 17
> Safety Coated Lab 45™ Media / Reagent Bottle....................... 17
> Screw Caps............................................................................. 17
> Safety Coated Media / Lab Bottle.............................................. 17
> Screw Caps, Black Phenolic...................................................... 17
> Safety Coated Reagent Bottle................................................... 17
> Safety Coated Solution Bottle................................................... 17
> Glass Types............................................................................. 18
> Factors for Selecting a Glass Container..................................... 19
> Factors other than USP Type..................................................... 19
An Alternative to Glass
>
>
>
>
>
>
>
Leak Resistant Bottles............................................................... 19
PET Containers.........................................................................21
Polypropylene Containers..........................................................20
Polystyrene Containers..............................................................20
Round HDPE & LDPE Bottles.....................................................20
Wide Mouth HPDE Containers....................................................20
Sterile PETG Containers............................................................21
Safety Coated Containers
> Plastic Bottles ................................................................. 20
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
Leak Resistant Bottle .............................................................. 22
Cylinder Round Bottle, HDPE, Natural ...................................... 23
Cylinder Round Bottle, HDPE, White ......................................... 23
Jug, HDPE .............................................................................. 23
Round Bottle, LDPE, Translucent .............................................. 23
Wide Mouth Blake Packer, HDPE, Natural ................................. 23
Wide Mouth Round Packer, HDPE, Natural ............................... 23
Wide Mouth Container, Polypropylene ...................................... 23
Wide Mouth Container, Polystyrene .......................................... 23
Wide Mouth Container, HDPE .................................................. 23
Sterile PETG Media Bottles ...................................................... 24
PET Diagnostic Bottle .............................................................. 24
PET Bottle, Transparent ........................................................... 24
Media Bottle, Sterile PET ......................................................... 24
Media Bottle, Sterile PET ......................................................... 24
Plastic Resins ......................................................................... 25
Chemical Compatibility ............................................................ 26
Closure Liner Guide ................................................................. 27
4
General Purpose Glass Bottles
■ Bottles manufactured from soda-lime glass that conforms to USP Type III
requirements
■ Available in clear glass or amber glass for light sensitive samples
■ Narrow mouth bottles are ideal for liquids
■ Wide mouth bottles are ideal for dry and viscous samples
■ Valumetric™ bottles are for measuring while you sample
■ White polypropylene or black phenolic screw caps
■ Screw caps are pre-attached to the containers or are available separately
■ Choice of cap liners: PTFE faced foamed polyethylene liner, poly-vinyl liner, rubber
liner, PTFE faced rubber, or PE cone liner
■ Tamper Evident Seal / HAZCOM Label provided in each case of bottles with the
exception of bulk packs
Cap Liner Specifications
Material
Description
Applications
Pulp / Poly-Vinyl
One mL poly-vinyl film bonded to one mL HDPE on a #30 white
pulp paper backing. Superior to plain pulp paper because it
provides an excellent moisture barrier.
General purpose: Suitable for wide range of applications. Chemical
resistance: Good for mild acids, alkalis, solvents, alcohols, oils and
aqueous products. Poor for active hydrocarbons and bleaches.
PTFE Faced Foamed
­Polyethylene
PTFE faced foamed polyethylene liner that offers the excellent
chemical resistance of PTFE with the compressibility and
sealing properties of polyethylene foam.
Typical applications: analytical lab samples, high purity chemicals,
strong acids, solvents. Excellent for environmental samples,
pharmaceuticals and diagnostic reagents.
PE Cone
Manufactured from polyethylene (LDPE). The unique cone
design provides a wedge type seal that not only seals across
the top but also across the inside diameter.
Unique problem solving type of liner. This liner is stress crack
resistant and offers superior torque retention and excellent sealing
characteristics. It is recommended that this liner be tested prior to
use for leak seal.
Styrene-Butadiene
Rubber (14B)
The 14B white rubber lining material consists of homogeneous
sulfur cured styrene-butadiene rubber. FDA Status complies
with 21CFR 177.26, “Rubber articles intended for repeated
use.”
Excellent properties of resilience, resistant to moisture vapor.
Satisfactory for most moderate chemicals. Not good for oils, strong
acids and hydrocarbons. Autoclavable.
PTFE Faced Rubber
The white rubber / 0.005” PTFE liner consists of virign PTFE
bonded to the white sulfur cured styrene-butadiene rubber.
Complies with the FDA 21CFR 177.1550.
Designed for the ultimate in product safety. PTFE provides totally inert
inner seal and surface facing the sample or product. Autoclavable.
ON
5
Valumetric™ Graduated Bottle
French Square
■
■
■
■
Clear or Amber, USP Type III soda-lime glass
Ideal for solvent, chemical or sample storage
Square shape maximizes storage space
Available with caps attached or bulk packs
without caps
Boston Round Bottle
■ Clear or Amber, Type III soda-lime glass
■ Ideal for solvent, chemical or sample storage
■ Available with caps attached or bulk packs
without caps
■
■
■
■
■
Clear, USP Type III soda-lime glass
Ideal for general storage
Easy removal of contents
Graduated in mL and ounces
Available with caps attached or bulk packs
without caps
Media Bottles
■ HAZCOM label allows for ID of content and safety notification
■ Labels provided
in each case
of bottles
with the4:44:38
exception
of bulk packs
WLAB_001_tamper
Evident.pdf
1 12/13/2011
PM
■ Tamper Evident Seal keeps bottle sealed, protecting contents from accidental misuse
WHEATON Tamper Evident WHEATON Tamper Evident WHEATON
Tamper Evident WHEATON Tamper
Evident WHEATON Tamper Evident WHEATON Tamper Evident WHEATON Tamper Evident WHEATON Tamper
M
ON Tamper Evident WHEATON Tamper Evident WHEATON Tamper Evident WHEATON Tamper Evident WHEATON Tamper
Y
CM
MY
CY
CMY
K
H
F
R
PE
50077397
Not actual label size
■
■
■
■
Manufactured from USP Type I borosilicate glass
Available with or without caps
45mm screw thread, wide mouth finish
Cap has a built-in wedge shaped sealing,
eliminating the need for a liner
■ Clear borosilicate glass bottle with graduations and
marking patch
■ Amber borosilicate glass bottle in 125mL size only
■ Pre-attached black phenolic screw caps with choice of
three liners
■ Hand grips on 1 Liter bottle provide easy handling
Tamper Evident Seal / HAZCOM Peel-and-Stick Label
Tamper Evident
C
Media Bottle, Lab 45™
Wide Mouth Packer
■ Amber, USP Type III soda-lime glass
■ Ideal for storage of light sensitive
samples or dry powders
■ Easy removal of contents
6
Boston Round Bottle
■ Clear or Amber, Type III soda-lime glass
■ Ideal for solvent, chemical or sample storage
■ Available with caps attached or bulk packs without caps
Color Capacity (oz)
Capacity (mL)*
Dia x H (mm)
Cap Size
Cap Material
Cap Liner
W216830** W216800
W216824
W216806
W216812
W216818**
W216865**
W216836
W216859
W216842
W216848
Cat. No.
Clear
Clear
Clear
Clear
Clear
Clear
Amber
Amber
Amber
Amber
Amber
1
1
1
1
1
1
1
1
1
1
1
30
30
30
30
30
30
30
30
30
30
30
31 x 79
31 x 79
31 x 79
31 x 79
31 x 79
31 x 79
31 x 79
31 x 79
31 x 79
31 x 79
31 x 79
20-400
20-400
20-400
20-400
20-400
20-400
20-400
20-400
20-400
20-400
20-400
Without Cap
White Polypropylene
White Polypropylene
White Polypropylene
Black Phenolic
Black Phenolic
Without Cap
White Polypropylene
White Polypropylene
White Polypropylene
Black Phenolic
—
Poly-Vinyl
Poly-Vinyl
PTFE Faced Foamed Polyethylene
PE Cone
Rubber
—
Poly-Vinyl
Poly-Vinyl
PTFE Faced Foamed Polyethylene
PE Cone
432
48
432
48
48
48
432
48
432
48
48
W216831**
W216801
W216825
W216807
W216813
W216819**
W216866**
W216837
W216860
W216843
W216849
W216854**
Clear
Clear
Clear
Clear
Clear
Clear
Amber Amber Amber Amber Amber Amber 2
2
2
2
2
2
2
2
2
2
2
2
60
60
60
60
60
60
60
60
60
60
60
60
39 x 94
39 x 94
39 x 94
39 x 94
39 x 94
39 x 94
39 x 94
39 x 94
39 x 94
39 x 94
39 x 94
39 x 94
20-400
20-400
20-400
20-400
20-400
20-400
20-400
20-400
20-400
20-400
20-400
20-400
Without Cap
White Polypropylene
White Polypropylene
White Polypropylene
Black Phenolic
Black Phenolic
Without Cap
White Polypropylene White Polypropylene White Polypropylene
Black Phenolic
Black Phenolic
—
Poly-Vinyl
Poly-Vinyl
PTFE Faced Foamed Polyethylene
PE Cone
Rubber
—
Poly-Vinyl
Poly-Vinyl
PTFE Faced Foamed Polyethylene
PE Cone
Rubber
288
24
288
24
24
24
288
24
288
24
24
24
W216832**
W216802
W216826
W216808
W216814
W216820**
W216867**
W216838
W216861
W216844
W216850
W216855**
Clear Clear Clear Clear Clear Clear Amber Amber Amber Amber Amber Amber 4
4
4
4
4
4
4
4
4
4
4
4
125
125
125
125
125
125
125
125
125
125
125
125
48 x 112
48 x 112
48 x 112
48 x 112
48 x 112
48 x 112
48 x 112
48 x 112
48 x 112
48 x 112
48 x 112
48 x 112
22-400
22-400
22-400
22-400
22-400
22-400
22-400
22-400
22-400
22-400
22-400
22-400
Without Cap
White Polypropylene White Polypropylene White Polypropylene Black Phenolic
Black Phenolic
Without Cap
White Polypropylene White Polypropylene White Polypropylene Black Phenolic Black Phenolic
—
Poly-Vinyl
Poly-Vinyl
PTFE Faced Foamed Polyethylene
PE Cone
Rubber
—
Poly-Vinyl
Poly-Vinyl
PTFE Faced Foamed Polyethylene
PE Cone
Rubber
160
24
160
24
24
24
160
24
160
24
24
24
250
250
250
250
250
250
250
250
250
250
250
250
60 x 136
60 x 136
60 x 136
60 x 136
60 x 136
60 x 136
60 x 136
60 x 136
60 x 136
60 x 136
60 x 136
60 x 136
24-400
24-400
24-400
24-400
24-400
24-400
24-400
24-400
24-400
24-400
24-400
24-400
Without Cap
White Polypropylene White Polypropylene White Polypropylene Black Phenolic Black Phenolic
Without Cap
White Polypropylene
White Polypropylene
White Polypropylene Black Phenolic
Black Phenolic
—
Poly-Vinyl
Poly-Vinyl
PTFE Faced Foamed Polyethylene
PE Cone
Rubber
—
Poly-Vinyl
Poly-Vinyl
PTFE Faced Foamed Polyethylene
PE Cone
Rubber
108
12
108
12
12
12
108
12
108
12
12
12
W216833**
Clear 8
W216803
Clear 8
W216827
Clear 8
W216809
Clear 8
W216815
Clear 8
W216821**
Clear 8
W216868** Amber
8
W216839
Amber 8
W216862
Amber 8
W216845
Amber 8
W216851
Amber 8
W216856**
Amber 8
*Approximate capacity
**Autoclavable
Qty/Case
7
Boston Round Bottles (continued)
Cat. No.
W216834**
W216804
W216828
W216810
W216816
W216822**
W216869**
W216840
W216863
W216846
W216852
W216857**
Color Capacity (oz)
Capacity (mL)*
Dia x H (mm)
Cap Size
Cap Material
Cap Liner
Clear Clear Clear Clear Clear Clear Amber Amber Amber Amber Amber
Amber 16
16
16
16
16
16
16
16
16
16
16
16
500
500
500
500
500
500
500
500
500
500
500
500
75 x 168
75 x 168
75 x 168
75 x 168
75 x 168
75 x 168
75 x 168
75 x 168
75 x 168
75 x 168
75 x 168
75 x 168
28-400
28-400
28-400
28-400
28-400
28-400
28-400
28-400
28-400
28-400
28-400
28-400
Without Cap
White Polypropylene
White Polypropylene
White Polypropylene Black Phenolic
Black Phenolic
Without Cap
White Polypropylene White Polypropylene
White Polypropylene Black Phenolic
Black Phenolic
—
Poly-Vinyl
Poly-Vinyl
PTFE Faced Foamed Polyethylene
PE Cone
Rubber
—
Poly-Vinyl
Poly-Vinyl
PTFE Faced Foamed Polyethylene
PE Cone
Rubber
60
12
60
12
12
12
60
12
60
12
12
12
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
94 x 206
94 x 206
94 x 206
94 x 206
94 x 206
94 x 206
94 x 206
94 x 206
94 x 206
94 x 206
94 x 206 94 x 206
33-400
33-400
33-400
33-400
33-400
33-400
33-400
33-400
33-400
33-400
33-400
33-400
Without Cap
White Polypropylene
White Polypropylene
White Polypropylene Black Phenolic
Black Phenolic
Without Cap
White Polypropylene
White Polypropylene
White Polypropylene
Black Phenolic
Black Phenolic
—
Poly-Vinyl
Poly-Vinyl
PTFE Faced Foamed Polyethylene
PE Cone
Rubber
—
Poly-Vinyl
Poly-Vinyl
PTFE Faced Foamed Polyethylene
PE Cone
Rubber
12
12
12
12
12
12
30
12
30
12
12
12
W216835**
Clear 32
W216805
Clear 32
W216829
Clear 32
W216811
Clear 32
W216817
Clear 32
W216823**
Clear 32
W216870**
Amber 32
W216841
Amber 32
W216864
Amber 32
W216847
Amber 32
W216853
Amber 32
W216858**
Amber 32
*Approximate capacity
**Autoclavable
Qty/Case
Replacement Caps for Boston Round Bottles
Cat. No.
Cap Size
Qty/Pack
Qty/Case
Black Phenolic with Rubber Liner (Autoclavable)
W23929820-400
W23929922-400
W23930024-400
W23930128-400
W23930233-400
72
72
72
72
72
Black Phenolic / PE Cone Liner
23925320-400
23925522-400
23925724-400
23925928-400
23926033-400
72
72
72
72
72
Cat. No.
Cap Size
Qty/Pack
Qty/Case
144
144
144
144
144
White Polypropylene / PTFE Faced Foamed Polyethylene Liner
23922920-400 72
23923122-400 72
23923324-400 72
23923528-400 72
23923633-400 72
144
144
144
144
144
144
144
144
144
144
White Polypropylene / Poly-Vinyl Liner
23920520-400
23920722-400
23920924-400
23921128-400
23921233-400
144
144
144
144
144
72
72
72
72
72
Torque for Screw Closures (in/lb)
Application torque is an important aspect used to optimize the integrity of the closure-to-container seal. If the closure is applied too loosely, the contents
could leak, especially during shipping. If the closure is applied too tightly, it may be too difficult to remove, or the container could break during application.
The table below offers some suggested torques that should provide an adequate seal for most applications. It is recommended that proper tests be
performed to determine the optimum torque for the application. The most practical way to check the tightness is to measure the removal torque after
the closure has been on the container for about 5 minutes. The minimum removal torque noted in the table should be maintained after a 24 hour period.
Phenolic / Urea Closure
on Glass Container
Phenolic / Urea Closure
on Plastic Container
PP / PE Closure
on Glass Container
PP / PE Closure
on Plastic Container
Closure (mm)
Application
Torque
Min Removal
Torque
Application
Torque
Min Removal
Torque
Application
Torque
Min Removal
Torque
Application
Torque
Min Removal
Torque
15
20
24
28
33
38
43
48
58
70
100
8
10
12
14
18
20
22
24
28
35
50
4
5
6
7
9
10
11
12
14
18
25
6
8
10
12
15
17
18
20
24
28
40
3
4
5
6
7
7
9
10
12
14
20
12
15
18
21
24
29
33
36
44
52
75
7
9
11
12
14
17
20
22
26
32
45
8
10
12
14
17
19
22
24
29
35
50
4
5
6
7
8
9
11
12
14
17
25
Although the information in this chart was acquired from reputable sources, it should only be used as a guide in determining the proper application torque.
WHEATON accepts no responsibility for the accuracy of this data or for any consequences resulting from its use. Visit www.wheaton.com for more information.
8
5
French Square Bottle
■
■
■
■
Clear, USP Type III soda-lime glass
Ideal for solvent, chemical or sample storage
Square shape maximizes storage space
Available with caps attached or bulk packs without caps
Color Capacity (oz)
Capacity (mL)*
Dia x H (mm)
Cap Size
Cap Material
Cap Liner
W216871
W216877
W216889
W216883**
Cat. No.
Clear Clear Clear Clear .5
.5
.5
.5
15
15
15
15
26 x 62
26 x 62
26 x 62
26 x 62
20-400
20-400
20-400
20-400
White Polypropylene
White Polypropylene Black Phenolic
Black Phenolic
Poly-Vinyl
PTFE Faced Foamed Polyethylene
PE Cone
Rubber
48
48
48
48
W216898**
W216893
W216872
W216878
W216890
W216884**
Clear Clear Clear Clear Clear Clear 1
1
1
1
1
1
30
30
30
30
30
30
31 x 72
31 x 72
31 x 72
31 x 72
31 x 72
31 x 72
24-400
24-400
24-400
24-400
24-400
24-400
Without Cap
White Polypropylene
White Polypropylene
White Polypropylene Black Phenolic
Black Phenolic
—
Poly-Vinyl
Poly-Vinyl
PTFE Faced Foamed Polyethylene
PE Cone
Rubber
280
280
48
48
48
48
W216899**
W216894
W216873
W216879
W216891
W216885**
Clear Clear Clear Clear Clear Clear 2
2
2
2
2
2
60
60
60
60
60
60
39 x 87
39 x 87
39 x 87
39 x 87
39 x 87
39 x 87
28-400
28-400
28-400
28-400
28-400
28-400
Without Cap
White Polypropylene
White Polypropylene
White Polypropylene Black Phenolic
Black Phenolic
—
Poly-Vinyl
Poly-Vinyl
PTFE Faced Foamed Polyethylene
PE Cone
Rubber
240
240
48
48
48
48
W216900**
W216895
W216874
W216880
W216892
W216886**
Clear Clear Clear Clear Clear Clear 4
4
4
4
4
4
125
125
125
125
125
125
45 x 111
45 x 111
45 x 111
45 x 111
45 x 111
45 x 111
33-400
33-400
33-400
33-400
33-400
33-400
Without Cap
White Polypropylene
White Polypropylene
White Polypropylene Black Phenolic
Black Phenolic
—
Poly-Vinyl
Poly-Vinyl
PTFE Faced Foamed Polyethylene
PE Cone
Rubber
120
120
24
24
24
24
W216901**
W216896
W216875
W216881
W216887**
Clear Clear Clear Clear Clear 8
8
8
8
8
250
250
250
250
250
56 x 137
56 x 137
56 x 137
56 x 137
56 x 137
43-400
43-400
43-400
43-400
43-400
Without Cap
White Polypropylene
White Polypropylene White Polypropylene Black Phenolic
—
Poly-Vinyl
Poly-Vinyl
PTFE Faced Foamed Polyethylene
Rubber
84
84
24
24
24
16
16
16
16
16
**Autoclavable
500
500
500
500
500
68 x 167
68 x 167
68 x 167
68 x 167
68 x 167
48-400
48-400
48-400
48-400
48-400
Without Cap
White Polypropylene White Polypropylene
White Polypropylene Black Phenolic
—
Poly-Vinyl
Poly-Vinyl
PTFE Faced Foamed Polyethylene
Rubber
40
40
24
24
24
W216902**
Clear W216897
Clear W216876
Clear W216882
Clear W216888**
Clear *Approximate capacity
Qty/Case
Replacement Caps for French Square Bottles
Cat. No.
Cap Size
Qty/Pack
Black Phenolic with Rubber Liner (Autoclavable)
W23929820-400
W23930024-400
W23930128-400
W23930233-400
W23930443-400
W23930648-400
Qty/Case
72
72
72
72
72
72
144
144
144
144
72
72
Black Phenolic / PE Cone Liner
239253 20-40072 144
239257 24-40072 144
239259 28-40072 144
239260 33-40072 144
Cat. No.
Cap Size
Qty/Pack
Qty/Case
White Polypropylene / PTFE Faced Foamed Polyethylene Liner
239229 20-40072 144
239233 24-40072 144
239235 28-40072 144
239236 33-40072 144
239238 43-40072 72
239240 48-40072 72
White Polypropylene with Poly-Vinyl Liner
239205 20-40072 144
239209 24-40072 144
239211 28-40072 144
239212 33-40072 144
239214 43-40072 72
239216 48-40072 72
9
6
AC Round Bottle
■ Clear, USP Type III soda-lime glass
■ Taller & narrower than Straight Sided Jars
■ Available with caps attached or bulk packs without caps
Color Capacity (oz)
Capacity (mL)*
Dia x H (mm)
Cap Size
Cap Material
Cap Liner
W217005**
W216995
W217000
Cat. No.
Clear Clear Clear 1
1
1
30
30
30
34 x 68
34 x 68
34 x 68
33-400
33-400
33-400
Without Cap
White Polypropylene
White Polypropylene —
Poly-Vinyl
PTFE Faced Foamed Polyethylene
432
48
48
W217006**
W216996
W217001
Clear Clear Clear 2
2
2
60
60
60
42 x 83
42 x 83
42 x 83
38-400
38-400
38-400
Without Cap
White Polypropylene
White Polypropylene —
Poly-Vinyl
PTFE Faced Foamed Polyethylene
288
48
48
W217007**
W216997
W217002
Clear Clear Clear 4
4
4
125
125
125
51 x 102
51 x 102
51 x 102
48-400
48-400
48-400
Without Cap
White Polypropylene
White Polypropylene —
Poly-Vinyl
PTFE Faced Foamed Polyethylene
144
24
24
W217008**
W216998
W217003
Clear Clear Clear 8
8
8
250
250
250
62 x 127
62 x 127
62 x 127
58-400
58-400
58-400
Without Cap
White Polypropylene
White Polypropylene —
Poly-Vinyl
PTFE Faced Foamed Polyethylene
96
24
24
16
16
16
**Autoclavable
500
500
500
76 x 145
76 x 145
76 x 145
70-400
70-400
70-400
Without Cap
White Polypropylene
White Polypropylene
—
Poly-Vinyl
PTFE Faced Foamed Polyethylene
48
24
24
W217009**
Clear W216999
Clear W217004
Clear *Approximate capacity
Replacement Caps for AC Round Bottles
Cat. No.
Cap Size
Qty/Pack
Reagent Bottle, Narrow Mouth
Qty/Case
White Polypropylene / PTFE Faced Foamed Polyethylene Liner
23923633-400 72
23923738-400 72
23924048-400 72
23924258-400 72
23924470-400 24
144
72
72
72
48
White Polypropylene / Poly-Vinyl Liner
23921233-400
23921338-400
23921648-400
23921858-400
23922070-400
144
72
72
72
48
72
72
72
72
24
Reagent Bottle, Wide Mouth
■ Borosilicate glass bottle and stopper
■ Features no-drip pour lip
■ Ground glass stopper fits securely to
prevent contamination
■ Wide mouth ideal for solids and viscous liquids
■ Easy to clean
■ Autoclavable
Cat. No.
Capacity (mL) W216014
W216015
216017
216019
216020
216021
50
100
250
500
1000
2000
Dia x H (mm)
43 x 90
54 x 110
72 x 140
89 x 175
109 x 215
135 x 260
Qty/Case
■ Borosilicate glass bottle and stopper
■ Features no-drip pour lip
■ Octagon-shaped round glass stopper fits securely to
prevent contamination
■ Narrow mouth ideal for liquids
■ Use amber bottles to protect light-sensitive samples
during storage
■ Autoclavable
Cat. No.
Color
W215235
W215255 215237 215257 215239 215259 215240 215241 215243 Clear
Amber
Clear
Amber
Clear
Amber
Clear
Clear
Clear
Capacity (mL)
100
100
250
250
500
500
1000
2000
5000
Dia x H (mm)
Stopper Size 53 x 115
53 x 115
72 x 145
72 x 145
88 x 175
88 x 175
110 x 215
135 x 265
175 x 320
14/23
14/23
19/26
19/26
24/29
24/29
29/32
29/35
45/40
Qty/Case
6
6
10
10
10
10
10
6
1
Reagent Bottle, Screw Cap
Stopper Size
24/20
29/22
34/35
45/40
60/46
60/46
Qty/Case
6
6
10
10
10
6
■
■
■
■
■
Manufactured from USP Type I borosilicate glass
Features no-drip pour lip
Pre-attached polypropylene screw cap with PTFE liner
Large writing patch
Autoclavable
Cat. No.
Size (mL) Dia x H (mm)
Cap Size
Qty/Case
220163
220223
220283
125
250
500
55 x 120
67 x 150
88 x 190
33-430
33-430
33-430
6
6
6
10
7
Wide Mouth Packer, Amber
■ Amber, USP Type III soda-lime glass
■ Ideal for storage of light sensitive samples or dry powders
■ Easy removal of contents
Dia x H (mm)
Cap Size
Cap Material
Cap Liner
W216960**
W216939
W216945
W216951
W216954
Cat. No.
Capacity (oz) Capacity (mL)*
1
1
1
1
1
30
30
30
30
30
37 x 65
37 x 65
37 x 65
37 x 65
37 x 65
28-400
28-400
28-400
28-400
28-400
Without Cap
White Polypropylene
White Polypropylene Black Phenolic
White Polypropylene
—
Poly-Vinyl
PTFE Faced Foamed Polyethylene
PE Cone
Poly-Vinyl
432
24
24
24
432
W216961**
W216940
W216946
W216952
W216955
2
2
2
2
2
60
60
60
60
60
44 x 75
44 x 75
44 x 75
44 x 75
44 x 75
33-400
33-400
33-400
33-400
33-400
Without Cap
White Polypropylene
White Polypropylene Black Phenolic
White Polypropylene
—
Poly-Vinyl
PTFE Faced Foamed Polyethylene
PE Cone
Poly-Vinyl
216
24
24
24
216
W216962**
W216941
W216947
W216953
W216956
4
4
4
4
4
125
125
125
125
125
54 x 95
54 x 95
54 x 95
54 x 95
54 x 95
38-400
38-400
38-400
38-400
38-400
Without Cap
White Polypropylene
White Polypropylene Black Phenolic
White Polypropylene
—
Poly-Vinyl
PTFE Faced Foamed Polyethylene
PE Cone
Poly-Vinyl
180
24
24
24
180
W216963**
W216942
W216948
W216957
8
8
8
8
250
250
250
250
66 x 119
66 x 119
66 x 119
66 x 119
45-400
45-400
45-400
45-400
Without Cap
White Polypropylene
White Polypropylene White Polypropylene
—
Poly-Vinyl
PTFE Faced Foamed Polyethylene
Poly-Vinyl
84
24
24
84
W216964**
W216943
W216949
W216958
16
16
16
16
500
500
500
500
80 x 146
80 x 146
80 x 146
80 x 146
53-400
53-400
53-400
53-400
Without Cap
White Polypropylene
White Polypropylene White Polypropylene
—
Poly-Vinyl
PTFE Faced Foamed Polyethylene Poly-Vinyl
60
12
12
60
99 x 178
99 x 178
99 x 178
99 x 178
53-400
53-400
53-400
53-400
Without Cap
White Polypropylene
White Polypropylene White Polypropylene
—
Poly-Vinyl
PTFE Faced Foamed Polyethylene
Poly-Vinyl
36
12
12
36
W216965**
32
W216944
32
W216950
32
W216959
32
*Approximate capacity
1000
1000
1000
1000
**Autoclavable
Qty/Case
Replacement Caps for Wide Mouth Packers
Cat. No.
Cap Size
Black Phenolic / PE Cone Liner
23925928-400
23926033-400
Qty/Pack
Qty/Case
72
72
144
144
White Polypropylene / PTFE Faced Foamed Polyethylene Liner
23923528-400
72
23923633-400
72
23923738-400
72
23923945-400
72
23924153-400
72
144
144
72
72
72
Cat. No.
Cap Size
White Polypropylene / Poly-Vinyl Liner
23921128-400
23921233-400
23921338-400
23921545-400
23921753-400
Qty/Pack
72
72
72
72
72
Qty/Case
144
144
72
72
72
Why Amber Glass?
Light sensitive products must be packaged in amber glass. Amber glass is formulated to absorb light in the Ultra Violet region of the electromagnetic
spectrum, filtering out the light to protect the sample in the container. This Test methods and specification limits for light protection can be found in the
U. S. Pharmacopoeia.
11
8
Valumetric™ Graduated Bottle, Clear
■
■
■
■
■
Clear, USP Type III soda-lime glass
Easy removal of contents
Graduated in mL and ounces
Ideal for general storage
Available with caps attached or bulk packs without caps
Dia x H (mm)
Cap Size
Cap Material
Cap Liner
W216989**
W216966
W216971
W216976
W216978**
W216982
W216987
Cat.No.
Capacity (oz) Capacity (mL)*
1
1
1
1
1
1
1
30
30
30
30
30
30
30
34 x 68
34 x 68
34 x 68
34 x 68
34 x 68
34 x 68
34 x 68
33-400
33-400
33-400
33-400
33-400
33-400
33-400
Without Cap
White Polypropylene
White Polypropylene Black Phenolic
Black Phenolic
White Polypropylene
Black Phenolic
—
Poly-Vinyl
PTFE Faced Foamed Polyethylene
PE Cone
Rubber
Poly-Vinyl
PE Cone
432
48
48
48
48
432
432
W216990**
W216967
W216972
W216977
W216979**
W216983
W216988
2
2
2
2
2
2
2
60
60
60
60
60
60
60
42 x 83
42 x 83
42 x 83
42 x 83
42 x 83
42 x 83
42 x 83
38-400
38-400
38-400
38-400
38-400
38-400
38-400
Without Cap
White Polypropylene
White Polypropylene Black Phenolic
Black Phenolic
White Polypropylene
Black Phenolic
—
Poly-Vinyl
PTFE Faced Foamed Polyethylene
PE Cone
Rubber
Poly-Vinyl
PE Cone
288
48
48
48
48
288
288
W216991**
W216968
W216973
W216980**
W216984
4
4
4
4
4
125
125
125
125
125
51 x 102
51 x 102
51 x 102
51 x 102
51 x 102
48-400
48-400
48-400
48-400
48-400
Without Cap
White Polypropylene
White Polypropylene Black Phenolic
White Polypropylene
—
Poly-Vinyl
PTFE Faced Foamed Polyethylene
Rubber
Poly-Vinyl
144
24
24
24
144
W216992**
W216969
W216974
W216981**
W216985
8
8
8
8
8
250
250
250
250
250
62 x 127
62 x 127
62 x 127
62 x 127
62 x 127
58-400
58-400
58-400
58-400
58-400
Without Cap
White Polypropylene
White Polypropylene Black Phenolic
White Polypropylene
—
Poly-Vinyl
PTFE Faced Foamed Polyethylene
Rubber
Poly-Vinyl
96
24
24
24
96
76 x 145
76 x 145
76 x 145
76 x 145
70-400
70-400
70-400
70-400
Without Cap
White Polypropylene
White Polypropylene White Polypropylene
—
Poly-Vinyl
PTFE Faced Foamed Polyethylene
Poly-Vinyl
48
24
24
48
W216993**
16
W216970
16
W216975
16
W216986
16
*Approximate capacity
500
500
500
500
**Autoclavable
Qty/Case
Replacement Caps for Valumetric™ Graduated Bottles
Cat. No.
Cap Size
Qty/Pack
Qty/Case
Black Phenolic / PE Cone Liner
23926033-400 72
144
White Polypropylene / PTFE Faced Foamed Polyethylene Liner
23923633-400 72
23923738-400 72
23924048-400 72
23924258-400 72
23924470-400 24
144
72
72
72
48
Cat. No.
Cap Size
Qty/Pack
White Polypropylene / Poly-Vinyl Liner
23921233-400
23921338-400
23921648-400
23921858-400
23922070-400
72
72
72
72
24
Qty/Case
144
72
72
72
48
12
9
Media Bottle, Lab 45™ Graduated Bottles
■
■
■
■
■
■
■ Cap has a built-in wedge shaped sealing ring, eliminating the need
for a liner
■ Provided with or without screw caps
■ Color coded caps can be purchased separately
■ Autoclavable
Borosilicate glass helps prevent pH changes
45mm screw thread, wide mouth finish
Graduated with writing patch
Special pour lip facilitates easy pouring
Bottles, caps and pour rings are autoclavable
Manufactured from USP Type I borosilicate glass
Description
Dia x H (mm) Cap Size (mm)
Cap Color
219917 219927 W219927-P Cat. No. Capacity (mL) 250
250
250
Bottle Only
Attached Pour Ring and Cap
Attached Pour Ring and Cap
70 x 138 70 x 144
70 x 144
45 45
45
—
White
Pink
Qty/Case
12
12
12
219919 219929 W219929-P 500
500
500
Bottle Only
Attached Pour Ring and Cap
Attached Pour Ring and Cap
86 x 180
86 x 186
86 x 186
45
45
45
—
White
Pink
12
12
12
219920 219930 W219930-P
1000
1000
1000
Bottle Only
Attached Pour Ring and Cap
Attached Pour Ring and Cap
101 X 227
101 x 233
101 x 233
45 45
45
—
White
Pink
12
12
12
219921 219931 W219931-P 2000
2000
2000
Bottle Only
Attached Pour Ring and Cap
Attached Pour Ring and Cap 137 X 261
137 x 267
137 x 267
45 45 45
—
White
Pink
6
6
6
Accessories, Lab 45™ Media Bottles
■ 45mm screw caps with or without sealing ring
■ For high temperature applications, use the PBT (polybutylene terephthalate)
screw caps and the ETFE (ethylene tetrafluoroethylene) pour lips which can
withstand temperatures up to 200ºC up to 2 hours
■ Autoclavable
Cat. No.
W240726-05
240726
240726-03
240726-04
240736
240740
240746
240750
240756
240760
Description
Pink Polypropylene Cap with Sealing
White Polypropylene Cap with Sealing Ring
Red Polypropylene Cap with Sealing Ring
Blue Polypropylene Cap with Sealing Ring
White Polypropylene Cap without Sealing Ring
White Polypropylene Cap with PTFE Faced Silicone Liner
White Polypropylene Cap with Open Top
Red Pbt Cap with PTFE Faced Silicone Liner
Natural Polypropylene Pour Rings
Red ETFE Pour Rings
Size (mm)
45
45
45
45
45
45
45
45
45
45
Qty/Case
12
12
12
12
12
12
12
10
12
10
1310
Media Lab Bottle, Graduated
■
■
■
■
Clear borosilicate glass bottle with graduations and marking patch
Amber borosilicate glass bottle in 125mL size only
Pre-attached black phenolic screw caps with choice of three liners
Hand grips on 1 Liter bottle provide easy handling
Cat No.
Color Capacity (mL)
Cap On*
Cap Off*
Cap Size Cap Material/Cap Liner
219715
219855
219755**
219865**
219815**
219875**
Clear Amber Clear Amber Clear Amber 125
125
125
125
125
125
55 X 123
55 X 123
55 X 123
55 X 123
55 X 123
55 X 123
55 X 119
55 X 119
55 X 119
55 X 119
55 X 119
55 x 119
33-430
33-430
33-430
33-430
33-430
33-430
Polyethylene (LDPE) Lined Phenolic Cap
Polyethylene (LDPE) Lined Phenolic Cap
Rubber Lined Phenolic Cap
Rubber Lined Phenolic Cap
PTFE Rubber Lined Phenolic Cap
PTFE Rubber Lined Phenolic Cap
Qty/Case
48
48
48
48
48
48
219437**
219717
219757**
219817**
Clear Clear Clear Clear 250
250
250
250
67 X 152
67 X 152
67 X 152
67 X 152
67 X 148
67 X 148
67 X 148
67 X 148
33-430
33-430
33-430
33-430
Without Cap
Polyethylene (LDPE) Lined Phenolic Cap
Rubber Lined Phenolic Cap
PTFE Rubber Lined Phenolic Cap
48
48
48
48
219439**
219719
219759**
219819**
Clear
Clear Clear Clear 500
500
500
500
88 X 192
88 X 192
88 X 192
88 X 192
88 x 188
88 x 188
88 x 188
88 x 188
33-430
33-430
33-430
33-430
Without Cap
Polyethylene (LDPE) Lined Phenolic Cap
Rubber Lined Phenolic Cap
PTFE Rubber Lined Phenolic Cap
24
24
24
24
W219440**
219720
219760**
219820**
* Dia x H (mm)
Clear
Clear
Clear Clear **Autoclavable
1000
1000
1000
1000
103 X 235
103 X 235
103 X 235
103 X 235
103 X 231
103 X 231
103 X 231
103 X 231
38-430
38-430
38-430
38-430
Without Cap
Polyethylene (LDPE) Lined Phenolic Cap
Rubber Lined Phenolic Cap
PTFE Rubber Lined Phenolic Cap
12
24
24
24
Media Lab Bottle, Non-Graduated
■
■
■
■
Clear borosilicate glass bottle without graduations
Amber borosilicate glass bottle in 125mL size only
Pre-attached black phenolic screw caps with choice of liner
Hand grips on 1 Liter bottle provide easy handling
Cat No.
Color
Capacity (mL)
Cap On*
Cap Off*
Cap Size
Cap Material/Cap Liner
219415**
219885**
219495
219575**
Clear
Amber
Clear
Clear
125
125
125
125
55 X 123
55 X 123
55 X 123
55 X 123
55 X 119
55 X 119
55 X 119
55 X 119
33-430
33-430
33-430
33-430
Without Cap
Without Cap
Polyethylene (LDPE) Lined Phenolic Cap
Rubber Lined Phenolic Cap
48
48
48
48
219417**
219497
219577**
Clear
Clear
Clear
250
250
250
67 X 152
67 X 152
67 X 152
67 X 148
67 X 148
67 X 148
33-430
33-430
33-430
Without Cap
Polyethylene (LDPE) Lined Phenolic Cap
Rubber Lined Phenolic Cap
48
48
48
219419**
219499
219579**
Clear
Clear
Clear
500
500
500
88 X 192
88 X 192
88 X 192
88 x 188
88 x 188
88 x 188
33-430
33-430
33-430
Without Cap
Polyethylene (LDPE) Lined Phenolic Cap
Rubber Lined Phenolic Cap
24
24
24
1000
1000
1000
103 X 235
103 X 235
103 X 235
103 X 231
103 X 231
103 X 231
38-430
38-430
38-430
Without Cap
Polyethylene (LDPE) Lined Phenolic Cap
Rubber Lined Phenolic Cap
12
12
12
W219420** Clear
W219500
Clear
W219580** Clear
* Dia x H (mm)
**Autoclavable
Qty/Case
Replacement Black Phenolic Screw Caps for Media Bottles
Cat. No. Cap Size
With Polyethylene (LDPE) Liner
24008033-430
24008138-430
With Rubber Liner (Autoclavable)
24028033-430
24028138-430
Qty/Case
Cat. No. Cap Size
Qty/Case
200
200
With PTFE Faced Rubber Liner (Autoclavable)
24048033-430
24048138-430
100
100
200
200
Open Top Cap With Gray Chlorobutyl / 50 Septa and Flange (Autoclavable)
24068033-430
24068333-430
100
1000
1114
Standard Wide Mouth Bottle, Clear
■
■
■
■
Clear, Type III soda-lime glass
Largest bottles available
Ideal for general, small to large volume storage
Available with caps attached or without caps
Capacity (oz)
Capacity (mL)*
Cap Size
Cap Material
Cap Liner
W216934**
W216924
W216929
Cat. No.
4
4
4
125
125
125
Dia x H (mm)
52 x 84
52 x 84
52 x 84
48-400
48-400
48-400
Without Cap
White Polypropylene
White Polypropylene
—
Poly-Vinyl
PTFE Faced Foamed Polyethylene
Qty/Case
24
24
24
W216935**
W216925
W216930
8
8
8
250
250
250
63 x 110
63 x 110
63 x 110
58-400
58-400
58-400
Without Cap
White Polypropylene
White Polypropylene —
Poly-Vinyl
PTFE Faced Foamed Polyethylene
24
24
24
W216936**
W216926
W216931
16
16
16
500
500
500
79 x 133
79 x 133
79 x 133
63-400
63-400
63-400
Without Cap
White Polypropylene
White Polypropylene —
Poly-Vinyl
PTFE Faced Foamed Polyethylene
24
24
24
W216937**
W216927
W216932
65
65
65
2000
2000
2000
122 x 213
122 x 213
122 x 213
83-400
83-400
83-400
Without Cap
White Polypropylene
White Polypropylene —
Poly-Vinyl
PTFE Faced Foamed Polyethylene
6
6
6
W216938**
130
4000
W216928
130
4000
W216933
130
4000
*Approximate capacity **Autoclavable
157 x 256
157 x 256
157 x 256
89-400
89-400
89-400
Without Cap
White Polypropylene
White Polypropylene —
Poly-Vinyl
PTFE Faced Foamed Polyethylene
4
4
4
Reservoir, High Capacity
■ Ideal as HPLC mobile phase or filtration reservoir
■ Safety coated glass bottles provide an added measure of
safety
■ UV protectant coating
■ Manufactured from WHEATON 33 low extractable
borosilicate glass that conforms to USP Type I and ASTM E
438 Type I, Class A requirements
■ Supplied white polypropylene screw cap has a built-in
wedge-shaped sealing ring, eliminating the need for a liner
■ Autoclavable
Cat. No.
Size (mL)
Cap Size (mm)
Dia x H (mm)
264710
264711
2000
5000
45
45
138 x 246
186 x 318
USP Type I vs. USP Type III Glass
Containers are classified by the USP as Type l, Type II and Type lll.
Type I is the most chemically durable glass and Type III is the least
durable. Test methods and specification limits are determined by the
USP in Chapter <660> Containers.
Qty/Case
1
1
USP Type III is a soda-lime glass with moderate chemical resistance. It
is typically acceptable for packaging dry powders that will be dissolved
into solutions or buffers that are insensitive to alkali.
Dropping Bottle, All Glass
■
■
■
■
Delivers stains or indicator solutions drop by drop
Available in clear or amber glass
Complete with a glass stopper
A partial turn of the ground glass stopper seals
the bottle
■ Manufactured from soda-lime glass
Cat. No. Color
Capacity (mL)
W211734
W211754
W211735
W211755
Clear
Amber
Clear
Amber
50
50
100
100
USP Type I classification is a borosilicate glass with superior chemical
resistance. This class of glass represents the least reactive glass
containers available. Typically, this glass can be used for most
applications, including packaging for parenteral and non-parenteral
products. Type I glass may be used to package acidic, neutral and
alkaline products. Water for injection, unbuffered products, chemicals,
sensitive lab samples and those requiring sterilization are commonly
packaged in Type I borosilicate glass.
Dia x H (mm)
45 x 95
45 x 95
56 x 120
56 x 120
Qty/Case
6
6
6
6
1512
Straight Sided Jar, Clear
■
■
■
■
■
Clear, USP Type III soda-lime glass
Wide mouth design is great for large solid samples
Walls allow for complete removal of contents
Ideal for soil sampling and environmental applications
Available with caps attached or bulk packs without caps
Dia x H (mm)
Cap Size
Cap Material
Cap Liner
W216919**
W216903
W216908
W216914
Cat. No.
Capacity (oz) Capacity (mL)*
2
2
2
2
60
60
60
60
55 x 48
55 x 48
55 x 48
55 x 48
53-400
53-400
53-400
53-400
Without Cap
White Polypropylene
White Polypropylene White Polypropylene
—
Poly-Vinyl
PTFE Faced Foamed Polyethylene
Poly-Vinyl
144
24
24
144
W216920**
W216904
W216909 W216913**
W216915
4
4
4
4
4
125
125
125
125
125
60 x 68
60 x 68
60 x 68
60 x 68
60 x 68
58-400
58-400
58-400
58-400
58-400
Without Cap
White Polypropylene
White Polypropylene Black Phenolic
White Polypropylene
—
Poly-Vinyl
PTFE Faced Foamed Polyethylene
Rubber
Poly-Vinyl
24
24
24
24
24
W216921**
W216905
W216910
W216916
8
8
8
8
250
250
250
250
73 x 88
73 x 88
73 x 88
73 x 88
70-400
70-400
70-400
70-400
Without Cap
White Polypropylene
White Polypropylene White Polypropylene
—
Poly-Vinyl
PTFE Faced Foamed Polyethylene
Poly-Vinyl
24
12
12
24
W216922**
W216906
W216911
W216917
16
16
16
16
500
500
500
500
91 x 95
91 x 95
91 x 95
91 x 95
89-400
89-400
89-400
89-400
Without Cap
White Polypropylene
White Polypropylene White Polypropylene
—
Poly-Vinyl
PTFE Foamed Faced Polyethylene
Poly-Vinyl
12
12
12
12
95 x 170
95 x 170
95 x 170
95 x 170
89-400
89-400
89-400
89-400
Without Cap
White Polypropylene
White Polypropylene White Polypropylene
—
Poly-Vinyl
PTFE Foamed Faced Polyethylene
Poly-Vinyl
12
12
12
12
W216923**
32
W216907
32
W216912
32
W216918
32
*Approximate capacity
1000
1000
1000
1000
**Autoclavable
Qty/Case
Replacement Caps for Straight Sided Jars
Cat. No.
Cap Size
Qty/Pack
Qty/Case
White Polypropylene / PTFE Faced Foamed Polyethylene Liner
23924153-400 72
23924258-400 72
23924470-400 24
23924689-400 24
72
72
48
48
Cat. No.
Cap Size
White Polypropylene / Poly-Vinyl Liner
23921753-400
23921858-400
23922070-400
23922289-400
Qty/Pack
72
72
24
24
Qty/Case
72
72
48
48
Replacement Caps for Standard Wide Mouth Bottles
Cat. No.
Cap Size
Qty/Pack
White Polypropylene / PTFE Faced Foamed Polyethylene Liner
23924048-400
72
23924258-400
72
23924363-400
24
23924583-400
24
23924689-400
24
Qty/Case
72
72
48
48
48
Cat. No.
Cap Size
White Polypropylene / Poly-Vinyl Liner
23921648-400
23921858-400
23921963-400
23922183-400
23922289-400
Qty/Pack
72
72
24
24
24
Qty/Case
72
72
48
48
48
1316
Safety Coated Bottle
■ Plastisol coating for safety
■ Made from clear and amber soda-lime glass that conforms to
USP Type III requirements
■ Available with or without caps
■ 8, 16 and 32oz Boston Round style
■ 80oz and 4L with jug handle
Cat No.
Color
Approx Size (oz)
Cap On***
Cap Off***
Cap Size
220724**
220924**
Clear
Amber
8
8
62 x 142
62 x 142
62 x 140
62 x 140
24-400
24-400
Without Cap
Without Cap
48
48
220725**
220925**
220755
220955
220745
220945
220775**
220975**
220735
220935
Clear
Amber
Clear
Amber
Clear
Amber
Clear
Amber
Clear
Amber
16
16
16
16
16
16
16
16
16
16
76 x 172
76 x 172
76 x 172
76 x 172
76 x 172
76 x 172
76 x 172
76 x 172
76 x 172
76 x 172
76 x 170
76 x 170
76 x 170
76 x 170
76 x 170
76 x 170
76 x 170
76 x 170
76 x 170
76 x 170
28-400
28-400
28-400
28-400
28-400
28-400
28-400
28-400
28-400
28-400
Without Cap
Without Cap
PE Cone LDPE Black Phenolic Cap
PE Cone LDPE Black Phenolic Cap
Polyethylene LDPE lined Black Phenolic Cap
Polyethylene LDPE lined Black Phenolic Cap
PTFE Rubber Lined Black Phenolic Cap
PTFE Rubber Lined Black Phenolic Cap
Aluminum Foil Lined Black Phenolic Cap
Aluminum Foil Lined Black Phenolic Cap
24
24
24
24
24
24
24
24
24
24
220726**
220926**
220756
220956
220746
220946
220776**
220976**
220736
220936
Clear
Amber
Clear
Amber
Clear
Amber
Clear
Amber
Clear
Amber
32
32
32
32
32
32
32
32
32 32
96 x 210
96 x 210
96 x 210
96 x 210
96 x 210
96 x 210
96 x 210
96 x 210
96 x 210
96 x 210
96 x 208
96 x 208
96 x 208
96 x 208
96 x 208
96 x 208
96 x 208
96 x 208
96 x 208
96 x 208
33-400
33-400
33-400
33-400
33-400
33-400
33-400
33-400
33-400
33-400
Without Cap
Without Cap
PE Cone LDPE Black Phenolic Cap
PE Cone LDPE Black Phenolic Cap
Polyethylene LDPE lined Black Phenolic Cap
Polyethylene LDPE lined Black Phenolic Cap
PTFE Rubber Lined Black Phenolic Cap
PTFE Rubber Lined Black Phenolic Cap
Aluminum Foil Lined Black Phenolic Cap
Aluminum Foil Lined Black Phenolic Cap
12
12
12
12
12
12
12
12
12
12
220728**
220738
Clear
Clear
80*
80*
135 x 295
135 x 295
135 x 291
135 x 291
38-439
38-439
Without Cap
Aluminum Foil Lined Black Phenolic Cap
6
6
220929**
220959
220949
220979**
220939
Amber
Amber Amber
Amber
Amber
4L*
4L*
4L*
4L*
4L*
160 x 340
160 x 340
160 x 340
160 x 340
160 x 340
160 x 336
160 x 336
160 x 336
160 x 336
160 x 336
38-430
38-430
38-430
38-430
38-430
Without Cap
PE Cone LDPE Black Phenolic Cap
Polyethylene LDPE lined Black Phenolic Cap
PTFE Rubber Lined Black Phenolic Cap
Aluminum Foil Lined Black Phenolic Cap
4
4
4
4
4
*Manufactured with jug handle
**Autoclavable
***Dia x H (mm)
Cap Material/Cap Liner
Qty/Case
1714
Safety Coated Jar
■ Plastisol coating for safety
■ Made from clear soda-lime glass that conforms to
USP Type III requirements
■ Wide mouth for use with solid samples
■ Available with or without caps
Cat. No. Approx Size (oz) 216637** 216627
216639** 216629 216641**
216631
* Dia x H (mm)
8
8
16
16
32
32
**Autoclavable
Cap On*
Cap Off*
Cap Size Cap Material/Liner
75 x 92
75 x 92
78 x 147 78 x 147 95 x 182 95 x 182 75 x 90
75 x 90
78 x 145
78 x 145
95 x 180 95 x 180 70-400
70-400
70-400 70-400
70-400
70-400 Without Cap
With Poly-Vinyl Lined Black Phenolic Cap
Without Cap
With Poly-Vinyl Lined Black Phenolic Cap
Without Cap
With Poly-Vinyl Lined Black Phenolic Cap Safety Coated Lab 45™ Media / Reagent Bottle
Safety Coated Reagent Bottle
■
■
■
■
■
■
■
■
■
■
■
■
Plastisol coating for safety
Made from clear borosilicate glass
45mm white polypropylene screw cap attached
Pour ring eliminates drips
Autoclavable
Color coded caps available separately
Cat. No.
Size (mL)
Approx Dia x H (mm)
Cap Size (mm)
W219937
219939
219940
250
500
1000
70 x 144
86 x 186
101 x 233
45
45
45
Qty/Case
12
12
12
Screw Caps
Cat. No.
240726
240726-03
240726-04
W240726-05
Description
Size (mm)
White PP, w/ Wedge-Shaped Inner Sealing Ring
Red PP, w/ Wedge-Shaped Inner Sealing Ring
Blue PP, w/ Wedge-Shaped Inner Sealing Ring
Pink PP, w/ Wedge-Shaped Inner Sealing Ring
45
45
45
45
Qty/Case
Qty/Case
12
12
12
12
12
12
Plastisol coating for safety
Clear borosilicate glass with writing patch
33-430 screw cap attached
Polypropylene cap with PTFE liner
125 and 250mL size
Autoclavable
Cat. No.
Size (mL)
Approx Dia x H (mm)
221014
221017
125
250
58 x 122
69 x 151
Cap Size
Qty/Case
33-430
33-430
6
6
Safety Coated Solution Bottle
■ Plastisol coating for safety
■ Made from low extractable borosilicate glass
■ Serum finish takes rubber stopper closure
12
12
12
12
Cat. No.
Size
221029
5 gallon
Approx Dia x H (mm)
294 x 502
Stopper Size
Qty/Case
12
Safety Coated Media / Lab Bottle
■
■
■
■
■
Plastisol coating for safety
USP Type I clear borosilicate glass
Provided with graduations and writing patch
33-430 screw cap can be purchased separately
Autoclavable
Cat. No.
Size (mL)
Approx Dia x H (mm)
Cap Size
Qty/Case
219455
219457
125
250
55 x 119
67 x 148
33-430
33-430
48
48
Screw Caps, Black Phenolic
Cat. No.
Cap Size
240280
240080
240480
33-430 33-430
33-430
* Not autoclavable
Liner
14B White Rubber Liner
Polyethylene (LDPE) Liner*
PTFE Faced (14B) Styrene-Butadiene
Qty/Case
200
200
100
Safety Coating Facts
Safety coating was developed to contain glass fragments and allow for a
controlled release of the contents in the event of a container breakage.
The plastisol coating is only applied to the outside of the container.
Safety coated containers can be used successfully at 121°C and below.
Do not use above 150°C or over direct heat / flame. The coating is
not dry-heat sterilizable.
1
18
Glass Types
The glass products in this catalog are made from many different glass formulations.
Following are brief definitions of these glass types and descriptions of their characteristics.
180 Glass: An exceptionally clear borosilicate glass of high chemical durability, which has
been especially formulated for the lowest background count. Great care has been taken
to select only those ingredients for the batch that would not cause unwanted background
count or color. Potassium as a separate element has been excluded from the batch to
minimize K40. Special controls assure high quality and batch-to-batch uniformity. This
glass is only available as a tubing vial.
Typical Composition (%) of Some Glass Containers
200 Glass: Also referred to as 33 expansion low extractable borosilicate glass, is a clear
borosilicate glass with exceptional thermal endurance that meets the requirements for
ASTM Type I, Class A. This glass also meets USP Type I Powdered Glass, USP Arsenic, EP
Type I Glass Grains (Test B) and EP Arsenic as specified in the current revisions of the U.S.
Pharmacopeia and European Pharmacopeia. Most of our laboratory products are made
from this type of glass.
Forming Process
“180” “200”
“300” “320” “400”
“500” “800” “900”
Tubing TubingTubingTubingMoldedMoldedMoldedMolded
Vial
Vial
Vial
Vial ContainerContainerContainerContainer
Si02
81 8172 7069 65.5 73 73
5.56 22
Al2O3 2276
300 Glass: A chemically resistant clear borosilicate glass that meets the requirements for
ASTM Type I, Class B. This glass also meets USP Type I Powdered Glass, USP Arsenic, EP
Type I Glass Grains (Test B), EP Arsenic as specified in the current revisions of the U.S.
Pharmacopeia and European Pharmacopeia.
4498
10914
14.2
Na2O+K2O CaO+MgO <0.2
B 2O 3
320 Glass: A similar composition to 300 Glass except amber color for light sensitive
applications. Meets UV light protection limits as specified in the current revisions of the
U.S. Pharmacopeia and European Pharmacopeia.
Fe2O3
400 Glass: A clear borosilicate glass that falls well within the limits for USP Type I
Powdered Glass, USP Arsenic, EP Type I Glass Grains (Test B) and EP Arsenic as specified
in the current revisions of the U.S. Pharmacopeia and European Pharmacopeia.
<0.2
1
0.5
1.5
0.5
10.5
10
13 1312 7 11 9 — 0.5
<0.1 <0.1<0.1 1.5 <0.1
1 <0.05 0.3
BaO
— —<0.1 2 2.5 1.5 — —
ZnO
————0.50.5 ——
MnO2 — —— —— 7 — —
—5————
TiO2 ——
500 Glass: Similar to the 400 Glass formulations except amber color for light sensitive
applications. Meets UV light protection limits as specified in the current revisions of the
U.S. Pharmacopeia and European Pharmacopeia.
SO3
800 Glass: A superior soda-lime clear glass that meets the requirements for USP Type III
Powdered Glass, USP Arsenic, EP Type III Glass Grains (Test B) and EP Arsenic as specified
in the current revisions of the U.S. Pharmacopeia and European Pharmacopeia.
Typical Properties of WHEATON Glass
— —— —— — 0.2 —
Glass Type
Borosilicate
900 Glass: Similar in formulation to 800 Glass except amber color for light sensitive
applications. Meets UV light protection limits as specified in the current revisions of the
U.S. Pharmacopeia and European Pharmacopeia.
Soda-Lime
“180”
“200”
“300”
“320”
“400”
“500”
“800”
“900”
Tubing
Vial
Clear
Tubing
Vial
Clear
Tubing
Vial
Clear
Tubing
Vial
Amber
Molded
Container
Clear
Molded
Container
Amber
Molded
Container
Clear
Molded
Container
Amber
Strain Point °C
510505525 510 520 505 510 496
Annealing Point °C
560560570 560 560 540 548 536
Softening Point °C
821820785 770 735 730 729 713
Linear Coefficient of
Expansion (0-300°C) x 10-7
Density g/cm3
ASTM Glass Type
& Class
USP Powered Glass <660>
USP Light Transmission <671>
USP Arsenic <211>
EP Glass Grains (Test B) 3.2.1
333355 55 63 62 88 91
2.232.222.33 2.42 2.44 2.46 2.48 2.50
I I I ———— —
A A B ———— —
Type I
Type I
Type I
Type I
Type I
Type I
Type III
Type III
——— Yes — Yes — Yes
YesYesYes Yes Yes Yes Yes Yes
Type I
Type I
Type I
Type I
Type I
Type I
Type III
Type III
EP Spectral Transmission 3.2.1
——— Yes — Yes — Yes
EP Arsenic 3.2.1
YesYesYes Yes Yes Yes Yes Yes
USP= U.S. Pharmacopeia, EP= European Pharmacopeia
Typical Elemental Extraction Data of Some Glass Types (ppm)
USP Glass Type
Type I Clear - Molded
Type III Clear - Molded
Type I Amber - Molded
Type III Amber - Molded
Type I Clear - Tubular
Type I Amber - Tubular
Blank- PE
Si
Al
Na
K
Ca
Mg
Fe
Ba
Zn
Ti
1.3
<0.006
0.26
0.05
<0.02
<0.02
<0.015
<0.008
0.14
<0.005
26
0.17
9.1
0.18
3.6
0.20
<0.01
<0.008
0.07
<0.005
2.4
0.06
0.71
0.1
<0.02
<0.02
<0.015
<0.008
0.21
<0.005
22
0.16
9.3
<0.03
3.4
0.23
0.016
<0.008
0.03
<0.005
4.8
<0.01
1.1
<0.03
0.13
0.07
<0.012
<0.008
<0.01
<0.005
7.4
0.17
1.8
0.45
<0.02
<0.02
<0.015
<0.008
0.23
<0.005
<0.05<0.006
<0.010.048<0.02
<0.02<0.015<0.08<0.006
<0.005
Results after autoclave at 121°C for 60 minutes - high purity water in 20mL containers
19
Factors for Selecting a Glass Container
Factors other than USP Type
Chemical Durability
Handling Considerations
The U.S. Pharmacopeia classifies pharmaceutical glass containers according to their
chemical durability, which is their resistance to water attack. Different types of glass
react differently when exposed to solutions and vapors. Reactive substances will leach
constituents from the glass surface into the contained product. This reaction can occur
with ordinary aqueous, saline and alcohol based solutions. The primary ion removed
from the glass surface is sodium; however all elements are subject to leaching. It is not
uncommon to experience an increase in product pH as sodium is extracted from the
container. Corrosion of the glass occurs over time and is accelerated by moist heattreating processes like autoclaving.
It is important to consider filling and processing steps when choosing a container. Both
mechanical and thermal stresses are important factors. For a given thermal expansion
range, a typical tubing vial with thin, uniform walls will withstand thermal shock better
than a molded glass container.
The physical design of the container will play a part in the amount of thermal and
mechanical shock resistance it exhibits. It is often necessary to make a compromise
between high resistance to mechanical shock and high resistance to thermal shock.
Containers are classified by the USP as Type l, Type II and Type lll. Type I is the most
chemically durable glass and Type III is the least durable. Test methods and specification
limits are determined by the USP in Chapter <660> Containers. USP Type can be used as
a general guide for container selection but should not be the only criteria in the decision
making process. A set of criteria has been developed over the years to assist with the
selection of glass containers. These guidelines were established to narrow the selection
of possible containers. It is the product manufacturers responsibility to do testing to
ensure that the glass container is suitable for the application and contained product.
USP Type I
USP Type I classification is a borosilicate glass with superior chemical resistance. This
class of glass represents the least reactive glass containers available. Typically, this glass
can be used for most applications, including packaging for parenteral and non-parenteral
products. Type I glass may be used to package acidic, neutral and alkaline products.
Water for injection, unbuffered products, chemicals, sensitive lab samples and those
requiring sterilization are commonly packaged in Type I borosilicate glass. Type I glass
can be subject to chemical attack under certain conditions, thus container selection
must be made carefully for very low and very high pH applications. Most glass laboratory
apparatus are Type I borosilicate glass.
Even though Type I glass has the highest chemical durability, there still may be some
sensitivity with certain packaged products. For applications where standard Type I
glass does not provide sufficient protection against alkali extraction and pH shifting,
internal surface treatment can be used to further improve the chemical durability of the
container. This surface enhancement may become especially important for pH sensitive
products packaged in small containers because smaller containers have a higher surface
area to volume ratio. See the USP Type II description for an explanation of the internal
surface treatment process. It should be noted that the USP does not place any additional
durability requirements on surface treated Type I glass.
USP Type II
USP Type II glass is soda-lime glass that has been treated with sulfur compounds to
de-alkalize the interior surface of the container. This treatment results in a container with
high chemical resistance because alkali is removed from the glass surface prior to use.
The amount of ions available to leach into the product is reduced, thus the container
durability is increased. Extraction salts will be present on the interior surface of new
sulfur treated containers, and the containers may require washing prior to use. Type II
glass is less chemically durable than Type I glass, but is more chemically durable than
Type III glass. It can be used for acidic and neutral parenteral preparations that remain
below pH 7 during their shelf life.
USP Type III
USP Type III is a soda-lime glass with moderate chemical resistance. It is typically
acceptable for packaging dry powders that will be dissolved into solutions or buffers that
are insensitive to alkali.
Type III glass may not be suitable for autoclaved products because the autoclaving
process will accelerate the glass corrosion reaction. Dry heat sterilization processes are
typically not a problem for Type III containers.
Light Sensitivity
Light sensitive products must be packaged in amber glass. Amber glass is formulated to
absorb light in the Ultra Violet region of the electromagnetic spectrum. Test methods and
specification limits for light protection can be found in the U. S. Pharmacopoeia.
Specific Ion Sensitivity
If a product is sensitive to the presence of particular ions, the composition of the glass
container should be considered. For example, products that contain sulfate salts may
experience the formation of precipitates if packaged in glass with barium or calcium in
the formulation. In this example, it would be desirable to avoid glass that contains barium
and calcium. A second example is pre-cleaned containers for environmental sampling.
Even though the containers are clean, the chemical durability characteristics of the glass
have not been altered. Thus, it would not be feasible to test the samples for low levels of
sodium, because the sample will extract sodium from the container’s surface.
20
An Alternative to Glass
Plastic Bottles
Plastic containers have been developed for a variety of applications across
many different industries over the years. There are many different types of
polymers used in the creation of these containers to help fill the demands
for the various applications. Polymers offer a variety of properties, each
having different levels of importance with different users depending on the
application. Some users may have flexibility within their product formula or
filling process and therefore focus on economical containers while others may
need containers that are stronger, autoclavable, transparent, sterilized, etc.,
therefore requiring more specifications. WHEATON® can help with polymer
selection through comprehension of the customer’s product, goals, and
adaptability. Several questions should be posed to gather this understanding.
Some examples include:
What is the container size and physical design: Narrow mouth vs. wide
mouth, tall vs. short, etc.?
Must the package be transparent, translucent, opaque or colored for either
marketing or light protection?
Are there specific shipment and storage conditions such as refrigeration,
freezing, exclusion of light, etc.?
Are there governmental regulations pertaining to the product?
How is the product going to be dispensed by the user?
Have any tests been run in plastic? Was it unsuccessful and why? What type
of plastics?
Many things govern polymer suitability for package use. These include:
■ Permeation / Barrier
■ Sorption Characteristics
■ Chemical Resistance
■ Stress Crack Resistance
■ Rigidity / Flexibility
■ Impact Resistance
■ Sterilizability
■ Recyclability
■ Temperature Resistance
For more information on WHEATON Plastic Bottles, contact your Area Sales
Manager.
21
Wide Mouth Blake Packer
Leak Resistant Bottles
■
■
■
■
High or low density polyethylene or polypropylene
Superior double seal closure for leak resistance
Amber or natural color
Available in narrow or wide mouth
Cylinder Round Bottles
■
■
■
■
■
■
■
■
Wide Mouth Container, Polypropylene
■ Durable container with good chemical resistance
■ Polypropylene container with linerless cap is
autoclavable
High density polyethylene, natural color
Good chemical resistance
Wide mouth is ideal for solid samples
Blake design maximizes storage space
Sterile PETG Media Bottles
High density polyethylene
Available in white or natural
Good chemical resistance
Narrow mouth is ideal for liquids
Sterile PET Media Bottle
■ Excellent gas barrier properties, ensuring pH stability
■ Sterile, tamper-evident seal ensures product integrity
prior to use
■ Meets ISO 10993 and/or USP Class VI
biocompatibility requirements
■ Recommended temperature range 70°C to-40°C
■ Polyethylene terephthalate
■ Permanent in-mold graduations
■ Supplied with caps pre-attached and shrink
wrapped in convenient trays
Packageability of Plastic Containers
Requirement
PC PE PETPETG PP PS
Lightweight
625513 6
PVC
Clarity
131121 1
Toughness
312139 8
Water Adsorption
623324 2
Water Vapor Permeability
625425 4
CO2 Permeability
762359 3
O2 Permeability
772368 2
Resistance: Acids
424424 2
Resistance: Alkalis
725522 2
Resistance: Oils
442234 2
Resistance: Solvents
332236 4
Resistance: High Humidity
611111 1
Resistance: Sunlight
441245 5
Resistance: Heat (hot fill)
1
Resistance: Cold
112245 9
3
1
1
2
5
1
This chart is a generalization to aid in selection; there are many forms, thicknesses and various copolymers and additives available. The lower the number, the better the property. 1=Excellent; 9=Poor. (PE Properties are similar for HDPE & LDPE.)
22
Leak Resistant Bottle
■ High or Low Density Polyethylene, or Polypropylene
■ Amber or natural color
■ Available in narrow or wide mouth
Cat. No.
■ Superior double seal closure for leak resistance
■ No-drip pour lip for safe and clean pouring
■ Polypropylene cap attached
Size (oz)*
Size (mL)
Material Color
Mouth Opening
Dia x H (mm)
Cap Size
Qty/Pack
209041 209121 209161** .1
.1
.1
4
4
4
HDPE
HDPE
PP
Natural
Amber
Natural Narrow
Narrow
Narrow
16 x 38 16 x 38 16 x 38 13-425 13-425 13-425 12 12 12 72
72
72
208923 209043 209123 209163** .3
.3
.3
.3
8
8
8
8
LDPE
HDPE
HDPE
PP
Natural
Natural
Amber
Natural Narrow
Narrow
Narrow
Narrow
25 x 43 25 x 43 25 x 43 25 x 43 20-410 20-410 20-410 20-410 12 12 12 12 72
72
72
72
208924
209044 209124 209164** .5
.5
.5
.5
15 15 15 15 LDPE
HDPE
HDPE
PP
Natural Natural Amber
Natural Narrow
Narrow
Narrow
Narrow
25 x 56 25 x 56 25 x 56 25 x 56 20-410 20-410 20-410 20-410 12 12 12 12 72
72
72
72
208925 209045 209125 209165** 209425 209545 209625 209665** 1
1
1
1
1
1
1
1
30 30 30 30 30 30 30 30 LDPE
HDPE
HDPE
PP** LDPE
HDPE
HDPE
PP
Natural Natural Amber
Natural Natural
Natural
Amber
Natural
Narrow
Narrow
Narrow
Narrow
Wide
Wide
Wide
Wide
32 x 69 32 x 69 32 x 69 32 x 69 33 x 69 33 x 69 33 x 69 33 x 69 20-410 20-410 20-410 20-410 28-410 28-410 28-410 28-410 12 12 12 12 12
12
12
12
72
72
72
72
72
72
72
72
208926 209046 209126 209166** 209546 209626 209666** 2
2
2
2
2
2
2
60 60 60 60 60 60 60 LDPE
HDPE
HDPE
PP
HDPE
HDPE
PP
Natural Natural Amber
Natural Natural
Amber Natural
Narrow
Narrow
Narrow
Narrow
Wide
Wide
Wide
39 x 84 39 x 84 39 x 84 39 x 84 39 x 88 39 x 88 39 x 88 20-410 20-410 20-410 20-410 28-410 28-410 28-410 12 12 12 12 12
12
12
72
72
72
72
72
72
72
208927 209047 209127 209167** 209427 209547 209627 209667** 4
4
4
4
4
4
4
4
125 125 125 125 125 125 125 125 LDPE
HDPE
HDPE
PP
LDPE
HDPE
HDPE
PP
Natural Natural Amber
Natural Natural
Natural
Amber Natural
Narrow
Narrow
Narrow
Narrow
Wide
Wide
Wide
Wide
50 x 101 50 x 101 50 x 101 50 x 101 51 x 98 51 x 98 51 x 98 51 x 98 24-410 24-410 24-410 24-410 38-410 38-410 38-410 38-410 12
12 12 12 12
12
12
12
72
72
72
72
72
72
72
72
208928 209048 209128 209168** 209428 209548 209628 209668** 8
8
8
8
8
8
8
8
250 250 250 250 250 250 250 250
LDPE
HDPE
HDPE
PP
LDPE
HDPE
HDPE
PP
Natural Natural Amber
Natural Natural
Natural
Amber Natural
Narrow
Narrow
Narrow
Narrow
Wide
Wide
Wide
Wide
61 x 129 61 x 129 61 x 129 61 x 129 61 x 125 61 x 125 61 x 125 61 x 125 24-410 24-410 24-410 24-410 43-410 43-410 43-410 43-410 12 12 12 12 12
12
12
12
72
72
72
72
72
72
72
72
208929 209049 209129 209169** 209429 209549 209629 209669** 16
16
16
16
16 16 16 16 500 500 500 500 500 500 500 500 LDPE
HDPE
HDPE
PP
LDPE
HDPE
HDPE
PP
Natural Natural
Amber
Natural Natural
Natural
Amber
Natural
Narrow
Narrow
Narrow
Narrow
Wide
Wide
Wide
Wide
72 x 171 72 x 171 72 x 171 72 x 171 72 x 164 72 x 164 72 x 164 72 x 164 28-410 28-410 28-410 28-410 53-410 53-410 53-410 53-410 12 12 12 12 12
12
12
12
48
48
48
48
48
48
48
48
209050 209130 209170** 209550 209630 32
32
32
32 32 1000 1000 1000 1000 1000 HDPE
HDPE
PP
HDPE
HDPE
Natural Amber
Natural Natural
Amber
Narrow
Narrow
Narrow
Wide
Wide
91 x 210 91 x 210 91 x 210 91 x 199 91 x 199 38-430 38-430 38-430 63-415 63-415 6
6
6
12
12
24
24
24
48
48
* Approximate capacity
**Autoclavable
Qty/Case
23
Cylinder Round Bottle, HDPE, Natural
Wide Mouth Round Packer, HDPE, Natural
■
■
■
■
■
■
■
■
■
High Density Polyethylene, natural color
Good chemical resistance
Narrow mouth ideal for liquids
Pre-attached white polypropylene screw cap with foamed
polyethylene liner
Cat. No.
Size (oz)
Size (mL)*
Dia x H (mm)
Cap Size
Qty/Pack
221153
221154
221155
1
2
4
30
60
125
27 x 78
35 x 98
41 x 123
20-410
20-410
20-410
12
12
12
Qty/Case
72
72
72
*Approximate capacity
High Density Polyethylene, white color
White HDPE helps protect light sensitive samples
Good chemical resistance
Narrow mouth ideal for liquids
Pre-attached white polypropylene screw cap with foamed
polyethylene liner
Size (mL)
Dia x H (mm)
Cap Size
Qty/Pack
30
60
120
27 x 78
35 x 98
41 x 123
20-410
20-410
24-410
12
12
12
Qty/Case
72
72
72
Jug, HDPE
High Density Polyethylene, natural color
Good chemical resistance
Narrow mouth ideal for liquids
Pre-attached white polypropylene screw cap with polyvinyl liner
Cat. No.
Size
Cross Section x H (mm)
Cap Size
Qty/Case
222333
1 Gallon
143 x 285
38-400
4
Dia x H (mm)
Cap Size
Qty/Case
60
120
250
500
1000
39 x 77
50 x 88
65 x 102
77 x 142
95 x 179
33-400
38-400
53-400
53-400
53-400
72
72
72
48
24
Cat. No. W209900 W209906 W209901 W209907 W209902 W209908 W209903 W209909 W209904 W209910 W209905 W209911 Size (mL) Dia x H (mm) Cap Size 30
30
60
60
125
125
250
250
500
500
1000
1000
39 x 41
39 x 41
49 x 46
49 x 46
53 x 68
53 x 68
84 x 64
84 x 64
85 x 99
85 x 99
116 x 97
116 x 97
43-400
43-400
53-400
53-400
58-400
58-400
89-400
89-400
89-400
89-400
120-400
120-400
Cap Liner Autoclavable Qty/Case
No liner
Polyethylene
No liner
Polyethylene No liner
Polyethylene No liner
Polyethylene No liner
Polyethylene No liner
Polyethylene Yes
No Yes No
Yes
No
Yes
No
Yes
No
Yes
No
72
72
48
48
36
36
36
36
24
24
24
24
Wide Mouth Container, Polystyrene
■ Clear polystyrene offers clarity of glass
and safety of plastic
■ Good resistance to inorganic chemicals
■ Pre-attached white polypropylene screw cap
with foamed polyethylene liner
Round Bottle, LDPE, Translucent
■ Low Density Polyethylene, translucent color
■ LDPE is very flexible with high impact strength
■ Excellent for mild and strong buffers, good
chemical resistance
■ Narrow mouth ideal for liquids
■ Pre-attached white polypropylene screw cap with
foamed polyethylene liner
Cat. No.
Size (mL)
Dia x H (mm)
Cap Size
Qty/Pack
221140
221142
221143
221144
W221145
7
15
30
60
125
19 x 63
25 x 78
33 x 73
39 x 88
47 x 115
15-415
15-415
20-410
20-410
20-410
12
12
12
12
12
Qty/Case
144
144
72
72
72
Wide Mouth Blake Packer, HDPE, Natural
High Density Polyethylene, natural color
Good chemical resistance
Blake design maximizes storage space
Wide mouth ideal for solids
Pre-attached white polypropylene screw cap with
foamed polyethylene liner
Cat. No. Size (mL)
Dia x H (mm)
Cap Size
W209912
W209913
W209914
W209915
W209916
W209917
30
60
125
250
500
1000
39 x 41
49 x 46
53 x 68
84 x 64
85 x 99
116 x 97
43-400
53-400
58-400
89-400
89-400
120-400
■
■
■
■
Size (oz)
Size (mL)*
Dia x H (mm)
Cap Size
4
16
32
120
500
1000
41 x 50 x 94
62 x 77 x 149
79 x 96 x 192
38-400
43-400
53-400
Qty/Case
72
48
24
72
48
36
36
24
24
High Density Polyethylene, natural color
Good chemical resistance
Largest container available: 2000 to 3840mL size
Pre-attached white polypropylene screw cap
with foamed polyethylene liner
Size (mL)
Cap Size
W2096772000 89-400
W2096783000 100-400
W2096793840 89-400
Cat. No.
Qty/Case
Wide Mouth Container, HDPE
Cat. No. 209683
209685
209686
*Approximate capacity
Size (mL)*
2
4
8
16
32
■ Durable container with good chemical resistance
■ Pre-attached white polypropylene screw cap
unlined or with foamed polyethylene liner
■ Polypropylene container with linerless cap
is autoclavable
Cat. No.
■
■
■
■
■
Size (oz)
Wide Mouth Container, Polypropylene
221163
221164
221165
■
■
■
■
Cat. No.
209672
209673
209674
209675
209676
*Approximate capacity
Cylinder Round Bottle, HDPE, White
■
■
■
■
■
High Density Polyethylene, natural color
Good chemical resistance
Round style
Wide mouth ideal for solids
Pre-attached white polypropylene screw cap
with foamed polyethylene liner
Qty/Case
6
4
4
24
Sterile PETG Media Bottles
PET Diagnostic Bottle
■ Excellent gas barrier properties, ensuring pH stability
■ Sterile, tamper-evident seal ensures product integrity prior to
use
■ Meets ISO 10993 and/or USP Class VI biocompatibility
requirements
■ Recommended temperature range 70°C to -40°C
■
■
■
■
Cat No.
WPBGC0030S
WPBGC0060S
WPBGC0125S
WPBGC0250S
WPBGC0250SB
WPBGC0500S
WPBGC1000S
WPBGC1000SB
WPBGC2000S
WPBGC2000SB
Capacity
Cap Size
Cap Type
30
60
125
250
250
500
1000
1000
2000
2000
20-415
24-415
38-430
38-430
38-430
38-430
38-430
38-430
53B
53B
PETG Tamper Evident
PETG Tamper Evident
PETG Tamper Evident
PETG Tamper Evident
PETG Standard Cap
PETG Tamper Evident
PETG Tamper Evident
PETG Standard Cap
PETG Tamper Evident
PETG Standard Cap
Ideal for reagents and buffer solutions
Clear and amber PET available
PP Caps lined with F217 foamed LDPE
Additional colors of PP caps available
Cat. No.
Qty/Pack
24
24
24
24
24
12
12
12
6
6
Color
Size (mL)
W220000
Clear
W220003Amber
W220001
Clear W220004Amber
W220002Clear
W220005
Amber Qty/Pack
5
5
10
10
20
20
Qty/Case
20 20
20 20
20
20
100
100
100
100
100
100
PET Bottle, Transparent
■ Polyethylene Terephthalate, transparent
■ PET offers clarity of glass with the safety of plastic
■ Good alcohol and solvent barrier; not good for strong
acids and bases
■ Sterilizable through EtO and gamma radiation
■ 120mL cylinder round style, smaller sizes have
sloped shoulders
■ Narrow mouth ideal for liquids
■ Pre-attached white polypropylene screw cap with
foamed polyethylene liner
Cat. No.
Size (mL)
Dia x H (mm)
Cap Size
Qty/Pack
221131
221133
221135
22
45
120
29 x 64
36 x 76
41 x 120
20-415
20-400
20-410
12
12
12
Qty/Case
72
72
72
Media Bottle, Sterile PET
■
■
■
■
■
30% thicker wall weight
New improved 1 Liter Bottle
Wide mouth design
Permanent in-mold graduations
Linerless closure
Cat. No.
W219980
Size (mL) Grad. (mL) Dimensions (L x W x H) Cap Size
1000
100
91 x 91 x 220mm
38-430
Qty/Tray Qty/Case
12
24
Media Bottle, Sterile PET
■
■
■
■
■
Lightweight
Permanent in-mold graduations
No-drip pour lip
20% headspace for additives
Manufactured from polyethylene terephthalate
tested superior for pH stability, temperature
durability, cloning efficiency and cytotoxicity
■ Supplied with caps pre-attached and shrink-wrapped in convenient trays
Cat. No. Size (mL) Grad. (mL) Dimensions (L x W x H)
Cap Size
219975
219979
33-430
33-430
125
500
25
50
53 x 53 x 99mm
75 x 75 x 175mm
Qty/Tray Qty/Case
24
12
48
24
25
Plastic Resins
Listed below are the primary resins used in the manufacture of our products. Following are some of the characteristics and features of these resins. Also listed is the Society of the
Plastic Industry (SPI) resin identification code number.
High Density Polyethylene (HDPE)
Polyethylene Terephthalate Glycol (PETG)
Flexible but more rigid than LDPE. Natural color is milky white, semitranslucent depending on density. Good impact strength and stress crack
resistance. Good chemical resistance. Good vapor barrier but poor gas
barrier. Sterilizable via EtO or gamma radiation.
Semi-rigid to rigid depending on wall thickness. Natural color — clear and
transparent. Good alcohol and solvent barrier; fair gas and good moisture
barrier. Good to fair chemical barrier; not good for strong acids or bases.
Good moldability. Sterilizable through EtO and gamma radiation. Good
stress crack and impact resistance at room temperature and above.
Low Density Polyethylene (LDPE)
Polypropylene (PP)
Very flexible, natural milky color, translucent with high impact strength.
Excellent for mild and strong buffers, good chemical resistance. Good water
vapor and alcohol barrier properties. Poor gas barrier, sterilizable with EtO
or gamma radiation. Good stress crack and impact resistance.
Rigid, solid, durable in container or closure forms. Opaque, natural grayish
yellow in natural form. Excellent stress crack and impact resistance.
Excellent moisture barrier, good oil and alcohol barrier, poor gas barrier
properties. Good chemical resistance. Sterilizable with EtO or autoclaving.
Linear Low Density Polyethylene (LLDPE)
Polystyrene (PS)
Very flexible, natural milky color, translucent with high impact strength.
Excellent for mild and strong buffers, good chemical resistance. Good water
vapor and alcohol barrier properties. Poor gas barrier, sterilizable with EtO
or gamma radiation. Good stress crack and impact resistance.
PS is a transparent, rigid and glass-like polymer. Good resistance to
inorganic chemicals. Light and heat stable, biologically inert and non-toxic.
Poor impact and stress crack resistance, poor barrier properties. EtO or
Gamma sterilizable.
Polybutylene Terephthalate (PBT)
Polyvinyl Chloride (PVC)
Good chemical resistance, clear color, resistant to water, weak acids and
bases at room temperature. Can be sterilized by EtO and autoclaving, at
temperatures up to 180°C.
Polycarbonate (PC)
Flexible to rigid. Good for coatings; fair water and good oxygen barrier.
Transparent to yellowish color in natural state. Good chemical resistance.
Sterilizable by EtO. Good impact and some stress crack resistance. Poor
recycling due to chloride residues.
Rigid and strong, excellent clarity. High impact strength. Poor barrier
properties.
PTFE, FEP, PFA
Polytetraflouroethylene, fluorinated ethylene propylene, perfluoralkoxy.
All fluoropolymers feature opaque characteristics, excellent chemical
resistance, good heat stability and thermal shock resistance. All are
autoclavable, heat, and gas sterilizable.
Polyethylene Terephthalate (PET)
Semi-rigid to rigid depending on wall thickness. Natural color — clear and
transparent. Good alcohol and solvent barrier; good gas and fair moisture
barrier. Good to fair chemical barrier; not good for strong acids or bases.
Good moldability. Sterilizable through EtO and gamma radiation. Good
stress crack and impact resistance at room temperature and above.
Typical Properties of Plastics
HDPE LDPE LLDPE
PC
PET
PETG
PP
PS PVCPTFE
Max. Temp °C
120
80501356070
135
70
70
240
Transparency
Translucent Translucent Translucent
Transparent Transparent Transparent TranslucentTransparentTranslucent Opaque
Sterilization**
Autoclave
No
No
No
Yes
No
No
Yes
No
No
Yes
Gas
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Dry Heat
No
No
No
No
No
No
No
No
No
Yes
Radiation
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
No
Disinfectants
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Density G/Cm30.95 0.92 0.92
1.19
1.33 1.27 0.901.061.342.15
Flexibility
Rigid
Semi Semi RigidRigidRigidRigid
Semi Flex Flex
Brittleness Temp °C
-100
-100
-76-135-10-40 0
+20
-30
-110
Tensile Strength, Psi
4000
2400
2000
9000
8000
7500
5000
6000
5000
4000
**Depends on thickness and relates to containers and closures. Because there are many grades of resins and processing methods, the above information should be used as a general guideline only.
Permeability of Plastics
HDPE LDPE LLDPE PC PET PETG PP PS PVCPTFE
N2 See Note 1
42
180
—
50
0.8
10
44
50
2
—
O2 See Note 1
150
500
—
250
5
25
90-140
185-485
4
—
CO2 See Note 1
580
2700
—
1000
15
125
650
1160
4
—
Moisture See Note 2
0.3
1.3
—
7.4
2.0-4.0
0.5
0.3-0.7
8.5
1.0-5.0
—
Note 1: Units are cc x mil / 100 in2 x day x atm @ 25°C
Note 2: Units are g x mil / 100 in2 x day @ 38°C, 50 - 90% RH
2326
Chemical Compatibility
Container Materials
Closure Liner Materials
Closure Materials
Poly
Glass HDPE LDPE PC
PET PETG PP
Al Foil LDPE Vinyl PTFE SBR Silicone
PBT Phenolic PP
Urea
Acetic Acid, Glacial
AABCACA
ABBACB
CAAD
Acetone
ADDDCDB
ADDADB
DABA
Acetonitrile
AAADBCA
AADABD
—AA—
Acrylonitrile AAADB—B
BADACD
—DB—
Ammonium Sulfide
A
D
—
Benzene
ADDDCDD
BDDADD
AADA
Bleach
AABBCCB
DBAADB
CDB—
Boric Acid
AAAAAAA
DAAAAA
ABA—
Carbonic Acid
AAAA—AA
BAAABA
B—A—
Chlorobenzene
ACDDBCC
ADDADD
BACB
Chloroform
ACCDDDD
ACDADD
DADA
Dichloromethane (DCM)
ACDDDDC
DDDADD
DCCB
Diethylamine
A C D D —— B
A D D A B B
—— B —
Dimethyl Formamide (DMF)
AAADBCA
AADADB
CAA—
Dimethyl Sulfoxide (DMSO)
AAADBCA
AADADD
C—A—
Dioxane
ABBDAAD
DBDADD
BAD—
Ether
ACDDAAD
BDDADD
ABDB
Ethyl Acetate
ABBDBCC
BBDADC
CACB
Ethyl Alcohol
AAAAAAA
BABAAB
ABAA
Ethylene Glycol
AAAAAAA
BAAAAA
ABAB
Formaldehyde
AAAABAA
AACABB
ABAA
Formic Acid 50%
AABB——A
CBBABC
ACAD
Gasoline
ACDCBBC
ADDADD
ABCA
Glycerine
AAAA—AA
AACAAB
AAA—
Heptane
ACDBB—C
ADCADD
AACA
Hexane
ABDCCBB
ADDADD
ABB—
Hydrochloric Acid (HCL) 50%
AAADBCA
DABADD
CAAD
Hydrofluoric Acid (HF) 50%
D
D
C
Hydrogen Peroxide 50%
BAAABBA
AACACB
BDAD
Iodine
ACDCA—C
ADCABA
D—C—
Isopropyl Alcohol
AAAAAAA
AABABA
AAA—
Methyl Alcohol
AAABBAA
AACAAA
BBAA
Methyl Ethyl Ketone (MEK)
ADDDBCB
ADDADD
CAB—
Methylene Chloride
ACDDDDC
DDDADD
DCCB
Nitric Acid 50%
ACBBCBC
DBBADD
CBCD
Pentane
ACCA——D
ACDADD
B—D—
Perchloric Acid 50%
BBBDBCB
DBDBDD
——B—
Phenol 50%
ADDDDDD
ADCADD
DAD—
Phosphoric Acid 50%
AAAAB—A
BABADD
BBAD
Picric Acid
ADDDB—D
ADDABD
DADD
Potassium Hydroxide
DAADDDA
DAAABC
CDA—
Sodium Hydroxide 50%
DABDDCA
DBCAAB
CDAC
Sodium Peroxide
ABBA——B
CBAABD
BBBD
Sodium Thiosulfate
AAABB—A
AAAABA
BAAB
A
A
A
A
D
—
D
C
—
D
A
A
A
A
A
C
A
A
B
D
A
D
A
D
A
A
C
D
Sulfuric Acid 50%
AAABBCB
CACADD
BCBD
Tetrahydrofuran (THF)
ACCDADB
ACDADD
DAB—
Toluene
ACCDCCC
ACCADD
DAC—
Trifluoroacetic acid (TFA) 50%
A
A
—
Vegetable Oil
ABBAAAA
ABAADA
AAAA
Xylene
ACDDC—D
ADDADD
CADB
(Tests
conducted at room temp)
Al Foil = aluminum foil
PC = polycarbonate
PTFE = polytetrafluoroethylene
A
A - Resistant
B
D
A
—
—
B - Limited Resistance
HDPE = high density polyethylene
PET = polyethylene terephthalate
SBR = styrene butadiene rubber
A
—
—
D
C - Poor Resistance
LDPE = low density polyethylene
PETG = polyethylene terephthalate glycol copolymer
—
D - Not Resistant
A
—
—
— - Unknown
PBT = polybutylene terephthalate
PP = polypropylene
Although the information in this chart was acquired from reputable sources, it should only be used as a guide in selecting a container and closure system. Because so many factors can affect
the chemical resistance of a material, in-house testing under actual conditions should be performed. WHEATON accepts no responsibility for the accuracy of this data or for any consequences
resulting from its use.
2724
Closure Liner Guide
PTFE Faced Silicone Rubber (PTFE / Silicone)
Pulp / Metal Foil
The liner consists of 0.005” thick PTFE bonded to 0.055” thick silicone rubber.
Aluminum foil bonded to pulp board. Good barrier properties, good resistance to
hydrocarbons, oils, ketones and alcohols. Not good for acids or alkalis.
Ideal for low temperature storage applications. PTFE facing provides excellent chemical
barrier. Autoclavable
Polyethylene Cone (PE Cone)
Styrene-Butadiene Rubber (14B)
Manufactured from polyethylene (LDPE). The unique cone design provides a wedge type
seal that not only seals across the top but also across the inside diameter.
The 14B white rubber lining material consists of homogeneous sulfur cured styrenebutadiene rubber. FDA Status complies with 21CFR 177.26, “Rubber articles intended
for repeated use.”
Unique problem solving type of liner. This liner is stress crack resistant and offers
superior torque retention and excellent sealing characteristics. It is recommended that
this liner be tested prior to use for leak seal.
Excellent properties of resilience, resistant to moisture vapor. Satisfactory for most
moderate chemicals. Not good for oils, strong acids and hydrocarbons. Not a natural
rubber. Autoclavable.
Low Density Polyethylene (LDPE) Disk
Foamed Polyethylene (PE Foam)
Manufactured from polyethylene. Good for distilled water, analytical standards and
reagents.
A one piece, three ply coextruded liner consisting of both foamed and solid LDPE. The
foam core is sandwiched with solid clear PE.
PTFE Faced Foamed Polyethylene (PTFE / PE Foam)
General Purpose: Broad applications base. Chemical resistance-good for acids,
alkalis, solvents, alcohols, oils, household cosmetics and aqueous products. Poor for
hydrocarbon solvents. Liner provides tight seal.
PTFE faced foamed polyethylene liner offers the excellent chemical resistance of PTFE
with the compressibility and sealing properties of polyethylene foam.
Typical applications: analytical lab samples, high purity chemicals, strong acids, solvents.
Excellent for environmental samples, pharmaceuticals and diagnostic reagents.
Pulp / Poly-Vinyl
One mil poly-vinyl film bonded to one mil HDPE on a #30 white pulp paper backing.
Superior to plain pulp paper because it provides an excellent moisture barrier.
Styrene-Butadiene Rubber / 0.005 PTFE (PTFE / Styrene-Butadiene)
The white rubber / 0.005” PTFE liner consists of virign PTFE bonded to the white sulfur
cured styrene-butadiene rubber. Complies with the FDA 21CFR 177.1550.
Designed for the ultimate in product safety. PTFE provides a totally inert inner seal and
surface facing the sample or product. Autoclavable.
General purpose: Suitable for wide range of applications. Chemical resistance: Good
for mild acids, alkalis, solvents, alcohols, oils and aqueous products. Poor for active
hydrocarbons and bleaches.
Foamed Polyethylene
Solid PE
PTFE Faced Foamed Polyethylene (PTFE / PE Foam)
PTFE Face
2528
PTFE Faced Silicone Rubber (PTFE / Silicone)
The liner consists of 0.005” thick PTFE bonded to 0.055” thick silicone rubber. Ideal for low
temperature storage applications. PTFE facing provides excellent chemical barrier. Autoclavable.
Silicone Rubber
PTFE Face
Polyethylene Cone (PE Cone)
Manufactured from polyethylene (LDPE). The unique cone design provides a wedge type seal that not
only seals across the top but also across the inside diameter.
Unique problem solving type of liner. This liner is stress crack resistant and offers superior torque
retention and excellent sealing characteristics. It is recommended that this liner be tested prior to
use for leak seal.
Wedge Seal
2926
Low Density Polyethylene (LDPE) Disk
Manufactured from polyethylene. Good for distilled water, analytical standards and reagents.
LDPE Disk
Pulp / Poly-Vinyl
Poly-vinyl film bonded to HDPE on a #30 white pulp paper backing. Superior to plain pulp paper
because it provides an excellent moisture barrier.
General purpose: Suitable for wide range of applications. Chemical resistance: Good for mild acids,
alkalis, solvents, alcohols, oils and aqueous products. Poor for active hydrocarbons and bleaches.
Pulp Backing
Poly-Vinyl Film
2730
Pulp / Metal Foil
Aluminum foil bonded to pulp board. Good barrier properties, good resistance to hydrocarbons, oils,
ketones and alcohols. Not good for acids or alkalis.
Pulp Board
Aluminum Foil
Styrene-Butadiene Rubber (14B)
The 14B white rubber lining material consists of homogeneous sulfur cured styrene-butadiene rubber.
FDA Status complies with 21CFR 177.26, “Rubber articles intended for repeated use.”
Excellent properties of resilience, resistant to moisture vapor. Satisfactory for most moderate
chemicals. Not good for oils, strong acids and hydrocarbons. Not a natural rubber. Autoclavable.
14B White Rubber Liner
3128
Foamed Polyethylene (PE Foam)
A one piece, three ply coextruded liner consisting of both foamed and solid LDPE. The foam core is
sandwiched with solid clear PE.
Foamed LDPE
General Purpose: Broad applications base. Chemical resistance-good for acids, alkalis, solvents,
alcohols, oils, household cosmetics and aqueous products. Poor for hydrocarbon solvents. Liner
provides tight seal.
Solid PE
Styrene-Butadiene Rubber / 0.005 PTFE (PTFE / Styrene-Butadiene)
The white rubber / 0.005” PTFE liner consists of virign PTFE bonded to the white sulfur cured styrenebutadiene rubber. Complies with the FDA 21CFR 177.1550.
Designed for the ultimate in product safety. PTFE provides a totally inert inner seal and surface facing
the sample or product. Autoclavable.
Styrene-Butadiene Rubber
Bonded PTFE Face
DURAN Group GmbH
Hattenbergstrasse 10
55122 Mainz, Germany
Tel.:+49 (0)6131 1445 4131
Fax:+49 (0)6131 1445 4016
[email protected]
www.duran-group.com
Wheaton® is a registered trademark of WHEATON Industries Inc. Lab 45™ and Valumetric™ are trademarks of WHEATON Industries Inc.
WHEATON Industries Inc. is a company of the DURAN Group.
Copyright © 2014 WHEATON Industries Inc.
WBRO045 05/2014 / 6038171 en 0416 kn Printed in Germany
For more information: www.wheaton.com