Gas- & PowderActuated
Fastening
Systems
Time is money on the jobsite. When a contractor in the
Midwest was falling behind schedule trying to tie down
highway baskets, he turned to Simpson Strong-Tie. Once
workers started using our PHBC powder-actuated clips,
installation times dropped dramatically from about five
minutes per anchor to just seconds. Find out what many
other professionals already know: Simpson Strong-Tie®
Gas- and Powder-Actuated Fastening Systems offer
consistent, high-performance fastening into a variety
of substrates.
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
GCN-MEP Gas-Actuated Concrete Nailer
The new GCN-MEP gas-actuated concrete nailer is the ideal solution for
attaching light-duty fixtures to concrete and metal deck for mechanical,
electrical and plumbing (MEP) applications. Since the tool does not
require electrical cords or pneumatic hoses, the gas-actuated GCN-MEP is
completely portable, increasing productivity.
NEW
FEATURES
t
t
t
t
t Tool dimensions:
t Length – 15.3" (439mm), 17.3" with magazine
t Width – 4.2" (107mm)
t Height – 15.3" (389mm)
t Tool weight: 8.3 lbs (3.7kg)
t Suitable Fasteners:
t Length – 1⁄2" (12.7mm) to 1 1⁄2" (38mm),
t Diameter – For .25" and .300" headed pins
t Magazine capacity: 40 + 2 pins*
t Average number of shots per fuel cell: 1,200
t Average number of shots per battery charge: 3,300
t 6V NiMH batteries
t Average battery charge time: 2 hours
t Operates at temperatures between 20°F–120°F (-6°C–49°C)
t 2 shots per second
*To ensure the tool does not discharge without pins in the magazine, all
but the last two pins will be used before reloading is necessary.
KEY FASTENING APPLICATIONS:
t
t
t
t
t
Conduit clips
Ceiling clips
Low-voltage cable
Cable straps
Drywall track to concrete, steel, CMU or lightweight concrete on metal
deck with magazine
Magazine sold separately
(MEP-MAG1KT)
Gas and Powder-Actuated Fastening Systems
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
Easy magazine attachment with no extra tools
Power to drive .125" diameter pins
Pin-depth control dial
Easy nose piece change-out (for .25" and .300" headed fasteners)
with no extra tools
t High-voltage spark for cleaner fuel combustion
t Comfortable, “sure-grip” rubber handle
t Battery charge indicator light
t Ladder hook
SPECIFICATIONS
THE GCN-MEP GAS-ACTUATED CONCRETE NAILER KIT INCLUDES:
t
t
t
t
t
t
t
GCN-MEP nailer or GCN-MEPMAG
2 batteries
Battery charger
Allen wrenches
Safety glasses and ear plugs
Operator’s manual/tool schematic
Rugged tool box
Replacement Parts
Model
Description
GCN-APP012
GCN-CHG007
GCN-PPA020
Adaptor
Charger (U.S.)
Battery (U.S.)
GCN-MEPKT
or
GCN-MEPMAGKT (with magazine)
179
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
GCN-MEP Fasteners and Accessories
GCN-MEP Gas-Actuated Pins and Assemblies for
Mechanical, Electrical and Plumbing (MEP) Applications
New, pre-assembled MEP fasteners are available for use with the GCN-MEP gas-actuated concrete nailer
designed for high-volume applications such as affixing conduit clips, rod hangers, cable ties and drywall track.
With their .300" heads, these versatile pins and assemblies can also be used with common powderactuated tools when fastening into harder substrates (structural steel or extra hard concrete) when required.
Codes: ICC-ES ESR-2811
Mechanical, Electrical and Plumbing Pins
GCC
Model No.
GRH25-R100
GRH37-R100
Description
⁄4" Rod Hanger w/ .125" Dia. x 1" Length Pin
3
⁄8" rod hanger w/ .125" Dia. Shank x 1" Length Pin
Pack Qty.
100
100
Compatible Gas-Actuated Nailer
GCN-MEP, T3
GCN-MEP, T3
Model No.
GCC50-R100
GCC75-R100
GCC100-R100
Description
1
⁄2" Conduit Clip w/ .125" Dia. x 1" Length Pin
3
⁄4" Conduit Clip w/ .125" Dia. x 1" Length Pin
1" Conduit Clip w/ .125" Dia. x 1" Length Pin
1" Conduit Clip (13 Gauge Steel) w/ .125" Dia. x
1" Length Pin
Pack Qty.
100
100
100
Compatible Gas-Actuated Nailer
GCN-MEP, T3
GCN-MEP, T3
GCN-MEP, T3
50
GCN-MEP, T3
Description
⁄2" Conduit Clamp w/ .125" Dia. x 1" Length Pin
3
⁄4" Conduit Clamp w/ .125" Dia. x 1" Length Pin
Pack Qty.
50
25
Compatible Gas-Actuated Nailer
GCN-MEP, T3
GCN-MEP, T3
Model No.
GAC-R100
Description
Angle Clip w/ .125" Dia. x 1" Length Pin
Pack Qty.
100
Compatible Gas-Actuated Nailer
GCN-MEP, T3
Model No.
GCT-R50
Description
Tie Strap Holder w/ .125" Dia x 1" Length Pin
Pack Qty.
50
Compatible Gas-Actuated Nailer
GCN-MEP, T3
Model No.
Description
⁄2" Dome Washer w/ .111"/ .125" Dia. x 1⁄2"
Length Pin (Step Shank Pin)
1
⁄2" Dome Washer w/ .125" Dia. x 3⁄4" Length Pin
Pack Qty.
Compatible Gas-Actuated Nailer
200
GCN-MEP, T3
200
GCN-MEP, T3
⁄2" Dome Washer w/ .125" Dia. x 1" Length Pin
200
GCN-MEP, T3
Description
⁄4-20 thread, 1⁄2" length thread, 3⁄4" length shank
(.125" dia shank)
Pack Qty.
Compatible Gas-Actuated Nailer
200
GCN-MEP, T3
Model No.
Description
Pack Qty.
Compatible Gas-Actuated Nailer
GBR2-R25
2" Dia. Ring, w/ .125" Dia. x 1" Length Pin
25
GCN-MEP, T3
Model No.
Description
Pack Qty.
Compatible Gas-Actuated Nailer
GTH-R200
.125" Dia. x 1" Length Pin
200
GCN-MEP, T3
GCC125-R50
Gas and Powder-Actuated Fastening Systems
Model No.
GCL50-R50
GCL75-R25
GW50-R200
GW75-R200
GW100-R200
Model No.
GTS-45075-R200
1
1
1
1
GCL
GAC
GCT
GW
GTS
GBR
GTH
GDP Strip Pins (with GCN-MEP MAGKT and 1 fuel cell)
180
NEW
Model No.
Description
Qty. Pins/Pack
Compatible Gas-Actuated Nailer
+ 1 Fuel Cell
1,000
GCN150, GCN-MEP, TF1100, C3
GDP-50KT
.106" dia. x ½" pin
GDP-562KT
.106" dia. x 5⁄8" pin
1,000
GCN150, GCN-MEP, TF1100, C3
GDP-75KT
.106" dia. x ¾" pin
1,000
GCN150, GCN-MEP, TF1100, C3
GDP-100KT
.106" dia. x 1" pin
1,000
GCN150, GCN-MEP, TF1100, C3
GDP-125KT
.106" dia. x 1¼" pin
1,000
GCN150, GCN-MEP, TF1100, C3
GDP-150KT
.106" dia. x 1½" pin
1,000
GCN150, GCN-MEP, TF1100, C3
Model No.
Description
Pack Qty.
Compatible Gas-Actuated Nailer
GDPS-50
1.09"/1.11" dia. x ½" pin
1,000
GCN150, GCN-MEP, TF1100, C3
GDPS-62
1.09"/1.11" dia. x 5⁄8" pin
1,000
GCN150, GCN-MEP, TF1100, C3
GDPS-75
1.09"/1.11" dia. x ¾" pin
1,000
GCN150, GCN-MEP, TF1100, C3
Model No.
Description
Pack Qty.
Compatible Gas-Actuated Nailer
GDPSK-137KT
.110" dia. X 13⁄8" spiral knurled pin
1,000
GCN150, GCN-MEP, F100, C3
GDP
GDPS
GDP
GDPSK
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
All single-shot pins are .125" diameter x 1" except where specified.
1
GRH
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
GCN-MEP Gas-Actuated Concrete Nailer
*
GCN-MEP Fasteners - Tension and Shear Loads in Normal-Weight Concrete
Model No.
GW-75,
GW-100,
GTH
Shank
Minimum
Diameter Penetration
In.
In.
(mm)
(mm)
0.125
(3.2)
Allowable Tension Load - lbs. (kN)
Allowable Shear Load - lbs. (kN)
Minimum
Spacing
f'c ≥ 2,000 psi f'c ≥ 3,000 psi f'c ≥ 4,000 psi f'c ≥ 2,000 psi f'c ≥ 3,000 psi f'c ≥ 4,000 psi
In.
(13.8 MPa)
(20.7 MPa)
(27.6 MPa)
(13.8 MPa)
(20.7 MPa)
(27.6 MPa)
(mm)
Concrete
Concrete
Concrete
Concrete
Concrete
Concrete
Minimum
Edge
Distance
In.
(mm)
5
⁄8
(15.9)
3
(76.2)
4
(101.6)
60
(0.27)
70
(0.31)
95
(0.42)
55
(0.27)
65
(0.29)
95
(0.42)
3
⁄4
(19.1)
3
(76.2)
4
(101.6)
85
(0.38)
105
(0.47)
190
(0.85)
120
(0.53)
145
(0.65)
215
(0.96)
1. The fasteners must not be driven until the concrete has reached the designated minimum compressive strength.
2. Minimum concrete thickness must be three times the fastener embedment into the concrete.
3. The allowable tension and shear values are only for the fastener in the concrete. Members connected to the
concrete must be investigated in accordance with accepted design criteria.
*
GCN-MEP Fasteners - Tension and Shear Loads in Sand-Lightweight Concrete over Metal Deck
GW-75,
GW-100,
GTH
0.125
(3.2)
Minimum
Penetration
In.
(mm)
Minimum
Spacing
In.
(mm)
5
⁄8
(15.9)
3
(76.2)
3
⁄4
(19.1)
3
(76.2)
Installed in Concrete
Installed Thru. 3-inch "w" deck
Allow. Tension
Load
lbs.
(kN)
Allow. Shear
Load
lbs.
(kN)
Allow. Tension
Load
lbs.
(kN)
Allow. Shear
Load
lbs.
(kN)
4
(101.6)
60
(0.27)
110
(0.49)
35
(0.16)
215
(0.96)
4
(101.6)
115
(0.51)
130
(0.58)
55
(0.24)
235
(1.05)
*See page 13 for an
explanation of the
load table icons
1. The fasteners must not be driven through the steel deck and into the light3. The steel deck must have a minimum thickness of 20 gauge and a minimum
weight concrete until the lightweight concrete has reached the designated
yield strength of 38 ksi.
minimum compressive strength.
4. The fasteners must be installed through the steel deck and into the concrete
2. The allowable tension and shear values are only for the fasteners driven
at the lower flute. The fastener must be a minimum of 11⁄8" from the edge of
the lower flute and 3 inches from the end of the deck.
through the steel deck and into the lightweight concrete. Members connected by the fastener, driven through the steel deck and into the lightweight
concrete, must be investigated in accordance with accepted design criteria.
*
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
GCN-MEP Fasteners - Tension and Shear Loads in Hollow CMU
Installed in CMU Face Shell
Model No.
Shank
Diameter
In.
(mm)
Minimum
Penetration
In.
(mm)
Minimum Edge
Distance
In.
(mm)
Minimum
Spacing
In.
(mm)
Allow. Tension
Load – lbs.
(kN)
Allow. Shear
Load – lbs.
(kN)
GW-75,
GW-100,
GTH
0.125
(3.2)
5
⁄8
(15.9)
3
(76.2)
8
(203.2)
55
(0.24)
65
(0.29)
GAS ACTUATED
FASTENER
STEEL
THICKNESS
1. The tabulated allowable load values are for the fasteners only. Members connected to the CMU receiving elements shall be
designed in accordance with the applicable code and accepted design criteria.
2. The tabulated allowable load values are for fasteners installed in hollow CMUs conforming to ASTM C 90. The minimum
allowable nominal size of the CMU must be 8 inches high by 8 inches wide by 16 inches long, with a minimum,1¼"-thick face
shell thickness, medium-weight and normal-weight concrete masonry units.
3. The tabulated allowable load values are for fasteners installed in the center of a hollow CMU face shell.
Gas and Powder-Actuated Fastening Systems
Model No.
Shank
Diameter
In.
(mm)
Minimum
Edge
Distance
In.
(mm)
ENTIRE POINTED PORTION
OF THE FASTENER MUST
PENETRATE THROUGH
THE STEEL
Detail A
*
GCN-MEP Fasteners - Tension and Shear Loads in Steel
Steel Thickness - (In.)
Minimum
3
1
3
Minimum
⁄16
⁄4
⁄8
Edge
Spacing
Distance
Allow.
Tension
Allow.
Shear
Allow.
Tension
Allow.
Shear
Allow.
Tension
Allow. Shear
In.
In.
Load
–
lbs.
Load
–
lbs.
Load
–
lbs.
Load
–
lbs.
Load
–
lbs.
Load – lbs.
(mm)
(mm)
(kN)
(kN)
(kN)
(kN)
(kN)
(kN)
Model No.
Shank
Diameter
In.
(mm)
GW-50,
GTH-50
0.111/0.125
(2.8/3.2)
⁄2
(12.7)
1
(25.4)
225
(1.00)
GW-50,
GTH-50
0.111/0.125
(2.8/3.2)
⁄2
(12.7)
1
(25.4)
240
(1.07)
ASTM A36
1
400
(1.78)
275
(1.22)
345
(1.53)
2454
(1.09)
3104
(1.38)
3254
(1.45)4
2804
(1.25)4
3504
(1.56)4
ASTM A572 Grade 50 or A992
1
1. The entire pointed portion of the fastener must penetrate through the steel
to obtain the tabulated values, see Detail A, except as noted in footnote 4.
2. The allowable tension and shear values are for the fastener only. Members
connected to the steel must be separately in accordance with accepted
design criteria.investigated.
380
(1.69)
2154
(0.96)4
3. Steel must conform to ASTM A36 (Fy = 36 ksi, F4 = 58 ksi), ASTM A572
Grade 50 (Fy = 50 ksi, F4 = 65 ksi), or ASTM A992 (Fy = 50 ksi, F4 = 65 ksi).
4. Tabulated values are based on minimum penetration of the fastener point
into steel of 0.25 inch (6.4mm).
181
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
GCN150
Gas-Actuated Concrete Nailer
The GCN150 gas-actuated concrete nailer is a portable
fastening tool for attaching light-duty fixtures such as
drywall track, furring strips, hat track and angle track to
concrete, steel, CMU and metal deck. The GCN150 has a
portable gas fuel supply that does not require electrical
cords or hoses. The GCN150 sets up quickly and offers
maximum productivity. With a 500 shot-per-hour capacity
and a pin jam release door, the GCN150 makes fastening
pins fast and easy. Additional attributes include two-step
pin loading into the magazine, light and well-balanced
weight, a battery indicator light and a sure-grip rubber
handle pad.
FEATURES:
t Fast: 40-pin magazine and 1,200-shot fuel cell
for reduced loading time
t Easy to use: Automatic piston reset
t Easy open jam release door
t Portable: No hoses, cords, or external energy
source required
t Convenient: Simple 2-step pin loading and
open-blade guide-jam release
t Easy-load fuel compartment
t No possibility of firing with no pins – when tool
is down to last 2 pins in the pin magazine a
"lock off" occurs
t Ladder hook
SPECIFICATIONS:
t Weight: 8.3 lbs
t Magazine capacity: 42
t Average number of fastens per fuel cell: 1,200
t Average number of fastens per battery charge: 3,300
t Average battery charge time: 2 hours
t Fastener type: Length – ½" to 1½"
Diameter – .102" to .109"
KEY FASTENING APPLICATIONS:
t Drywall track to concrete, steel, CMU or metal deck
t Furring strips to concrete, steel or CMU
t Plywood to concrete, steel or CMU
t Angle track to concrete, steel or metal deck
TOOL IS SOLD IN RUGGED FIXTURED
TOOL BOX AND INCLUDES:
t 2 Batteries
Easy open jam release door
t 1 Charger
t Safety glasses
t Ear protection
t Operators manual
t Tool schematic
t Tool cleaning instructions
Replacement Part:
182
Model
Description
GCN-APP012
GCN-CHG007
GCN-PPA020
Adaptor
Charger (U.S.)
Battery (U.S.)
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
Gas-Actuated Fastening System
t Tool dimensions: Length – 17.3",
Width – 4.2", Height – 15.3"
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
GCN150
Gas-Actuated Concrete Nailer
GDP Pins
GDP concrete pins are designed to work with the GCN150 and GCN-MEP (with magazine attached)
gas-actuated concrete nailer tools as well as with most major brand gas concrete-nailer tools. The
10-fastener patented strip is designed with break-away plastic. The pins are designed for use in
A36, A572 and A992 steel, concrete and CMU block.
Codes: ICC-ES ESR-2811; Florida FL 11506.2
.106 Diameter Shank Drive Pins for the GCN150
Model No.
Length
(in.)
Qty. Pins / pack
+1 Fuel Cell
Packs/
Carton
Compatible with
these Tools
Simpson
Strong-Tie
GCN-MEP,
GCN-MEPMAG
GCN150
Others:
TF1100, C3
GDP-50KT
½
1,000
5
GDP-62KT
5
⁄8
1,000
5
GDP-75KT
¾
1,000
5
GDP-100KT
1
1,000
5
GDP-125KT
1¼
1,000
5
GDP-150KT
1½
1,000
5
GDP
U.S. Patent 605016
Note: All installations are limited to dry, interior environments.
*
GDP Tension Loads in Normal-Weight Concrete
Minimum
Shank
Penetration
Diameter
in.
in.
(mm)
Tension Loads
Minimum
Minimum
Edge
Spacing f'c ≥ 2000 psi (13.8 Mpa) f'c ≥ 3000 psi (20.7 Mpa) f'c ≥ 4000 psi (27.6 Mpa) f'c ≥ 5000 psi (34.5 Mpa)
Distance
in.
Allow. Load
Allow. Load
Allow. Load
Allow. Load
in.
(mm)
lbs. (kN)
lbs. (kN)
lbs. (kN)
lbs. (kN)
(mm)
⁄8
5
(15.9)
¾
3
(76.2)
4
(102)
(19.1)
25
(0.11)
30
(0.13)
45
(0.20)
45
(0.20)
30
(0.13)
30
(0.13)
30
(0.13)
30
(0.13)
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
1. The fasteners must not be driven until the concrete has reached the designated minimum compressive strength.
2. Minimum concrete thickness must be three times the fastener embedment into the concrete.
3. The allowable tension values are only for the fasteners in the concrete. Members connected to the concrete must
be investigated in accordance with accepted design criteria.
*
GDP Shear Loads in Normal-Weight Concrete
Shear Loads
Minimum
Minimum
Minimum
Edge
Shank
Spacing f'c ≥ 2000 psi (13.8 Mpa) f'c ≥ 3000 psi (20.7 Mpa) f'c ≥ 4000 psi (27.6 Mpa) f'c ≥ 5000 psi (34.5 Mpa)
Penetration
Distance
Diameter
in.
in.
Allow. Load
Allow. Load
Allow. Load
Allow. Load
in.
in.
(mm)
(mm)
lbs. (kN)
lbs. (kN)
lbs. (kN)
lbs. (kN)
(mm)
⁄8
5
0.106
(2.7)
(15.9)
¾
(19.1)
3
(76.2)
4
(102)
25
(0.11)
25
(0.11)
25
(0.11)
25
(0.11)
45
(0.20)
55
(0.24)
75
(0.33)
75
(0.33)
1. The fasteners must not be driven until the concrete has reached the designated minimum compressive strength.
2. Minimum concrete thickness must be three times the fastener embedment into the concrete.
3. The allowable shear values are only for the fasteners in the concrete. Members connected to the concrete must
be investigated in accordance with accepted design criteria.
Gas-Actuated Fastening System
0.106
(2.7)
*See page 13 for an explanation of the load table icons
183
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
GCN150
Gas-Actuated Concrete Nailer
*
GDP Tension and Shear Loads in Sand-Lightweight Concrete
Shank
Diameter
in.
Minimum
Penetration
in.
(mm)
Minimum
Edge
Distance
in.
(mm)
Minimum
Spacing
in.
(mm)
3
(76.2)
4
(102)
Tension Loads
Shear Loads
f'c ≥ 3000 psi (20.7 Mpa)
f'c ≥ 3000 psi (20.7 Mpa)
Allow. Load
lbs. (kN)
Allow. Load
lbs. (kN)
75
(0.33)
35
(0.16)
⁄8
5
0.106
(2.7)
(15.9)
*See page 13 for an explanation
of the load table icons
Note: All installations are limited to
dry, interior environments.
105
140
¾
(0.47)
(0.62)
(19.1)
1. The fasteners must not be driven until the lightweight concrete has reached the designated minimum compressive strength.
2. Minimum lightweight concrete thickness must be three times the fastener embedment into the lightweight concrete.
3. The allowable shear and tension values are only for the fasteners in the lightweight concrete. Members connected to the
lightweight concrete must be investigated in accordance with accepted design criteria.
*
GDP Tension and Shear Loads in Sand-Lightweight Concrete over Metal deck
Tension Loads –
Shear Loads –
Tension Loads –
Shear Loads –
Minimum
Minimum
Minimum
Thru 1.5" “B” Deck
Thru 1.5" “B” Deck
Thru 3" “W” Deck
Thru 3" “W” Deck
Edge
Shank
Spacing
Penetration
Distance
Diameter
f'c ≥ 3000 psi (20.7 Mpa) f'c ≥ 3000 psi (20.7 Mpa) f'c ≥ 3000 psi (20.7 Mpa) f'c ≥ 3000 psi (20.7 Mpa)
in.
in.
in.
in.
Allow. Load
Allow. Load
Allow. Load
Allow. Load
(mm)
(mm)
(mm)
lbs. (kN)
lbs. (kN)
lbs. (kN)
lbs. (kN)
⁄8
5
0.106
(2.7)
(15.9)
¾
1
(25.4)
4
(102)
65
(0.29)
195
(0.87)
60
(0.27)
180
(0.80)
130
270
60
180
(0.80)
GDP Tension and Shear Loads in Hollow CMU
Minimum
Minimum
Edge
Shank
Penetration
Distance
Diameter
in.
in.
in.
(mm)
(mm)
0.106
(2.7)
⁄8
5
(15.9)
Minimum
Spacing
in.
(mm)
Tension Loads
Shear Loads
Allow. Load
lbs. (kN)
Allow. Load
lbs. (kN)
8
(203)
35
(0.16)
50
(0.22)
3
(76.2)
* *See page 13 for an
explanation of the
load table icons
1. The tabulated allowable load values are for the fasteners only. Members connected to the CMU receiving elements shall be
designed in accordance with the applicable code and accepted design criteria.
2. The tabulated allowable load values are for fasteners installed in hollow CMUs conforming to ASTM C 90. The minimum
allowable nominal size of the CMU must be 8 inches high by 8 inches wide by 16 inches long, with a minimum,1 1⁄4"-thick
face shell thickness, lightweight concrete masonry units.
3. The tabulated allowable load values are for fasteners installed in the center of a hollow CMU face shell.
* *See page 13 for an
GDP Tension and Shear Loads in A36 Steel
Minimum
Tension Loads
Shear Loads
Minimum
Minimum
Edge
Shank
1
3
1
1
3
Spacing
Penetration
⁄
8" Thick
⁄
16" Thick
⁄
4" Thick
⁄
8" Thick
⁄16" Thick 1⁄4" Thick
Distance
Diameter
in.
in.
Allow. Load Allow. Load Allow. Load Allow. Load Allow. Load Allow. Load
in.
in.
(mm)
(mm)
lbs. (kN)
lbs. (kN)
lbs. (kN)
lbs. (kN)
lbs. (kN)
lbs. (kN)
(mm)
1
125
210
220
285
225
205
0.106
½
Thru
(25.4)
(0.56)
(0.93)
(0.98)
(1.27)
(1.00)
(0.91)
(2.7)
(12.7)
1. The entire pointed portion of the fastener must penetrate through the steel to obtain the tabulated values. See Detail A.
2. The allowable tension and shear values are for the fastener only. Members connected to the steel must be investigated
separately in accordance with accepted design criteria.
3. Steel must conform to ASTM A36 specifications, with Fy = 36 ksi, minimum.
explanation of the
load table icons
*
GDP Tension and Shear Loads in A572 Grade 50 or A992 Steel
184
Shank
Diameter
in.
Minimum
Penetration
in.
(mm)
0.106
(2.7)
Thru
Minimum
Edge
Distance
in.
(mm)
½
(12.7)
Minimum
Spacing
in.
(mm)
1
(25.4)
Tension Loads
⁄16" Thick
3
⁄4" Thick
1
Shear Loads
⁄16" Thick
3
GAS ACTUATED
FASTENER
⁄4" Thick
1
STEEL
THICKNESS
Allow. Load Allow. Load Allow. Load Allow. Load
lbs. (kN)
lbs. (kN)
lbs. (kN)
lbs. (kN)
225
(1.00)
185
(0.82)
250
(1.11)
1. The entire pointed portion of the fastener must penetrate through the steel to obtain the tabulated values. See Detail A.
2. The allowable tension and shear values are for the fastener only. Members connected to the steel must be investigated
separately in accordance with accepted design criteria.
3. Steel must conform to ASTM A572 Grade 50 or A992 specifications, with Fy = 50 ksi, minimum.
145
(0.64)
Detail A
ENTIRE POINTED PORTION
OF THE FASTENER MUST
PENETRATE THROUGH
THE STEEL
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
Gas-Actuated Fastening System
(0.58)
(1.20)
(0.27)
(19.1)
1. The fasteners must not be driven through the steel deck and into the lightweight concrete until the lightweight concrete has reached the designated
minimum compressive strength.
2. The allowable tension and shear values are only for the fasteners driven through the steel deck and into the lightweight concrete. Members connected by
the fastener, driven through the steel deck and into the lightweight concrete, must be investigated in accordance with accepted design criteria.
3. The steel deck must have a minimum thickness of 20 gauge and a minimum yield strength of 38 ksi.
4. The fasteners must be installed through the steel deck and into the concrete at the lower flute. The fastener must be a minimum of 1 1⁄8" from the edge of
the lower flute and 3 inches from the end of the deck.
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
GCN150 Concrete Nailer Fasteners and Accessories
The GDPS pins are designed to work in the GCN150 and GCN-MEPMAG gas-actuated nailer
tools for installation into A36, A572 Grade 50 and A992 structural steel. The step-shank pin,
with smaller-diameter tip, facilitates easier penetration into the steel, while the larger diameter
upper shank provides more shear resistance and successful installation.
1.09"/ 1.11" Diameter Shank Drive Pins for the GCN150
Model No.
Length
(in.)
Qty. Pins/ Pack
Pack/ Carton
+ 1 fuel cell
⁄2
1,000
5
⁄8
1,000
5
⁄4
1,000
5
GDPS-50KT
1
GDPS-62KT
5
GDPS-75KT
3
Compatible Tools
Simpson Strong-Tie
Others
GCN150
GCNMEPMAG
TF1100, C3
GDPS
* *See page 13 for an explanation
GDPS Tension and Shear Loads in Steel
of the load table icons
Min.
Allowable Tension Loads lbs. (kN) Allowable Shear Loads lbs. (kN)
Min.
Shank Min. PenMin.
Edge
Spacing
etration
Model Dia.
Steel
Distance
Steel Thickness (in.)
Steel Thickness (in.)
in.
in.
in.
No.
Strength3
in.
(mm)
(mm)
(mm)
3
1
3
1
3
1
3
1
⁄16
⁄4
⁄8
⁄2
⁄16
⁄4
⁄8
⁄2
(mm)
0.110
(2.8)
GDPS
0.110
(2.8)
THRU
THRU
ASTM
A36
95
170 1654 1454 180
265 2254 2254
(0.42) (0.76) (0.73)4 (0.64)4 (0.80) (1.18) (1.00)4 (1.00)4
1.0
(25.4)
0.5
(12.7)
ASTM
A572,
110
170 1554
1.0
Grade 50
(0.49) (0.76) (0.69)4
(25.4)
or ASTM
A992
—
205
305 2054
(0.91) (1.36) (0.91)4
—
Gas and Powder-Actuated Fastening Systems
0.5
(12.7)
1. The entire pointed portion of the fastener must penetrate through the steel to obtain the tabulated values, unless
otherwise indicated in footnote 4.
2. The allowable tension and shear values are for the fastener only. Members connected to the steel must be investigated
separately in accordance with accepted design criteria.
3. Steel strength must comply with the minimum requirements of ASTM A 36 (Fy = 36 ksi, Fu = 58 ksi) or ASTM A 572,
Grade 50 (Fy = 50 ksi, Fu = 65 ksi), or ASTM A992 (Fy = 50ksi, Fu = 65 ksi)
4. Tabulated values are based on minimum penetration depth of 0.35" (8.9 mm).
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
Fuel Cell
The GFC34 fuel cell is designed to operate with the GCN150 and GCN-MEP Gas-Actuated
Concrete Nailers and also works with many major brand gas concrete-nailer tools. The
fuel cell provides 1,200 shots and can operate at temperatures between 20°–120°F
(-6°–49°C). The fuel cells are offered in a 2-per-pack clamshell. Additionally, one fuel cell
is included with each pack of 1,000 pins.
Gas Fuel Cells
Model No.
Description
Pack
Qty.
Packs/
Carton
Compatible with these
Tools
GFC34
34 gram fuel cells
12
—
GFC34-RC2
(2) 34 gram fuel cells
2
6
Simpson Strong-Tie
GCN-MEP and GCN-150
Others: TrakFast ®
TF1100, Trak-It ® C3
GFC34
GWL-100 Lathing Washer and GMR-1 Magnetic Ring
The GWL-100 lathing washer is used with the GCN150 tool and attaches lath to the wall surface for overlaying
scratch coats, brown coats and stucco. The washers are held onto the nose of the tool with the GMR-1 magnetic
ring and are attached to the substrate (including concrete and CMU) with GDP pins, which fasten through the
washer. No extra tools are needed to install the magnetic ring to the nosepiece of the tool.
Lathing Washer and Magnetic Ring
Model No.
Description
Pack Qty.
Carton Qty.
GWL-100
Lathing Washer, 1" Dia.
1,000
5,000
GMR-1
Magnetic Ring for GCN150
10
900
Lathing Washer and Magnetic Rings are sold seperately.
185
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
GCN150 Concrete Nailer Fasteners and Accessories
Spiral Knurl Gas Pins
GDPSK gas pins are designed for attaching plywood and OSB to cold-formed steel studs. The spiral knurl provides a positive lock and resists back
out. Installed with the GCN150 concrete nailer or GCN-MEP (with magazine) concrete nailers, the GDPSK-138 gas pin provided faster installation
and set up times, which contributes to lower labor costs. The hardened pins quickly and cleanly pierce the cold-form steel and leave the pin head
flush with the wood fixture. The 1 3⁄8" length pin can be used for ½"–¾" thick plywood, and 14–22 gauge steel.
Spiral Knurl Gas Pins
.110 Diameter Shank, .25” diameter Head, for the GCN150 or GCN-MEP with magazine
Model
Length
Qty pins/ pack
+ 1 fuel cell
Packs/Carton
Compatible with
these Tools
GDPSK-138KT
1 3⁄8"
1,000
5
Simpson Strong-Tie:
GCN-150,
GCN-MEP w/ magazine.
Others: TF1100, C3
NEW
GDPSK
*
Model
No.
Shank
Diameter
in.
(mm)
Minimum
Edge Dist.
in.
(mm)
Minimum
Spacing
in.
(mm)
GDPSK-138
0.109
(2.77)
⁄16
(20.6)
4
(101.6)
13
Allowable Loads
Designation
Thickness
mils
(gauge)
Tension
lbs.
(kN)
Shear
lbs.
(kN)
33
(20)
30
(0.13)
70
(0.31)
43
(18)
48
(0.21)
89
(0.40)
1. Entire pointed portion of the fastener must penetrate through the steel to obtain tabulated values.
2. The allowable tension and shear values are for the fastener only. Members connected to the steel must be investigated
separately in accordance with accepted design criteria.
3. Fastener is to be installed in the center of the stud flange.
*
Spiral Knurl Pin Tension and Shear Loads in Structural Steel Studs,
50 ksi Minimum Yield Strength
Model
No.
Shank
Diameter
in.
(mm)
Minimum
Edge Dist.
in.
(mm)
Minimum
Spacing
in.
(mm)
GDPSK-138
0.109
(2.77)
⁄16
(20.6)
4
(101.6)
13
Designation
Thickness
mils
(gauge)
Allowable Loads
Tension
Shear
lbs.
lbs.
(kN)
(kN)
54
(16)
92
(0.41)
150
(0.67)
68
(14)
73
(0.32)
218
(0.97)
1. Entire pointed portion of the fastener must penetrate through the steel to obtain tabulated values.
2. The allowable tension and shear values are for the fastener only. Members connected to the steel must be investigated
separately in accordance with accepted design criteria.
3. Fastener is to be installed in the center of the stud flange.
186
*See page
13 for an
explanation
of the load
table icons
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
Gas and Powder-Actuated Fastening Systems
Spiral Knurl Pin Tension and Shear Loads in Structural Steel Studs, 33 ksi Minimum Yield Strength
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
Important Information
Powder-Actuated Fastening Systems
Gas- and Powder-Actuated Fastening Safety Principles
Before operating any Simpson Strong-Tie Anchor Systems® gas- or powder-actuated tool, you must read and understand the Operator's Manual and be trained
by an authorized instructor in the operation of the tool. Simpson Strong-Tie highly recommends you read and fully understand the safety guidelines of the tool
you use. You must then pass a test and receive a certified operator card to become a Certified Operator of Simpson Strong-Tie tools. The test and Operator’s
Manual are included with each tool kit and extra copies can be obtained by contacting Simpson Strong-Tie at (800)999-5099.
GENERAL SAFETY
INSTALLATION SAFETY
To avoid serious injury or death:
To avoid serious injury or death:
t ALWAYS make sure that the operator and bystanders wear safety
t ALWAYS hold the tool perpendicular (90°) to the fastening surface to
glasses. Hearing and head protection are also recommended.
prevent ricocheting fasteners. Use the spall guard whenever possible.
t ALWAYS post warning signs when gas- or powder-actuated tools are
t NEVER attempt to fasten into soft, thin, brittle or very hard materials
in use. Signs should state "Tool in Use" and should be posted within
the area where the tool is being used.
such as drywall, light gauge steel, glass, tile or cast iron as these
materials are inappropriate. Conduct a pre-punch test to determine
base material adequacy.
t ALWAYS store gas-and powder-actuated tools unloaded. Tools and
t NEVER attempt to fasten into soft material like wood or drywall
powder loads should be stored in a locked container out of the reach
of children.
(fastening through soft materials into an appropriate base material
may be allowed if the application is appropriate).
t NEVER place any part of your body over the front muzzle of the tool
t NEVER attempt to fasten to a spalled, cracked or uneven surface.
even if no fastener is present. The fastener, pin or tool piston can
cause serious injury or death in the event of an accidental discharge.
t NEVER transport fasteners or other hard objects in the same pocket
Gas and Powder-Actuated Fastening Systems
or container with powder loads or fuel cells. These objects may strike
the energy source, or puncture the fuel cell, thereby igniting and
causing serious injury or death.
t NEVER attempt to bypass or circumvent any of the safety features
on a powder- or a gas-actuated tool.
t ALWAYS keep the tool pointed in a safe direction.
t ALWAYS keep your finger off the trigger.
Safety equipment, such as safety glasses
and ear plugs, are recommended when
using powder-actuated tools.
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
t ALWAYS keep the tool unloaded until ready to use.
Extension Poles for Gas- and Powder-Actuated Tools
PETH2
PETBPA
PETBSM
PETS4
Model
Description
Complete 6 ft. tool,
PET-6PKT with boot, handle and
1 extension
Complete 8 ft. tool,
PET-8PKT with boot, handle and
2 extensions
PETH2
Handle
Tool boot for PTP tool
PETBPA
series
PETS2
Pole extension
PETS4
Pole extension
Extension Pole Tool for PT-27
Length
6 ft.
8 ft.
2 ft.
N/A
2 ft.
4 ft.
PETG
PETG
Advantages:
t.PEVMBSMFOHUIToGUGUGU
t&BTZKPCTJUFTUPSBHF
t&MJNJOBUFTOFFEGPSTDBGGPMEJOH
t3VHHFEBOEEVSBCMFEFTJHO
PETS2
Extension Pole Tool for
PTP-27, PTP-27L and PTP-27S
NEW
Model
Description
Complete 6 ft. tool,
PET-6SMKT with boot, handle and 1
extension
Complete 8 ft. tool,
PET-8SMKT with boot, handle and 2
extensions
PETH2
Handle
Tool boot for standard
PETBSM
and modular tools
PETS2
Pole extension
PETS4
Pole extension
Extension Poles for GCN-MEP, GCN150
Length
6 ft.
8 ft.
2 ft.
N/A
2 ft.
4 ft.
Model
Description
Complete 6 ft. tool, with
PETG-6-KT boot, handle and one
extension
Complete 8 ft. tool, with
PETG-8-KT boot, handle and two
extensions
PETH2
Handle
PETG
Boot
PETS2
Pole extension
PETS4
Pole extension
Length
6 ft.
8 ft.
2 ft.
N/A
2 ft.
4 ft.
187
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
Tool Application Matrix
Powder-Actuated Fastening Systems
This matrix matches Simpson Strong-Tie® powder-actuated tools with the trades that would typically use each tool.
The selection is based upon the features of the tool matching the needs of the trade.
Premium Tools
PTP-27L
(Page 192)
FEATURES
tAutomatic
tAdjustable Power
tLow Recoil/Noise
t2 ⁄2" Pin
Capacity
(4" Pin w/Washer)
PTP-27S
(Page 193)
tFully
Automatic
tAutomatic
t10-Fastener
Magazine
tLow Recoil/Noise
tAdjustable Power
tLow Recoil/Noise
t2 7⁄8" Pin
Capacity
tAdjustable Power
tDrywall Track Tool
t1 5⁄8" Pin
Capacity
PTP-27SMAGR
(Page 193)
tFully
Automatic
tRotating
Fastener
Magazine
t10-Fastener
Magazine
tAdjustable Power
tLow Recoil/Noise
t1 1⁄4" Pin
Capacity
DRYWALL
Good
ELECTRICAL
Better
Good
Best
Best
Better
GENERAL
Best
Best
FRAMER
Best
Best
PLUMBING/
FIRE SPRINKLER
ACOUSTICAL/
OVERHEAD
Good
REMODELING
Better
Better
CARPENTRY
Better
Better
FLOORING
Better
Better
GLAZING
188
Best
Good
Better
HVAC
Better
RENTAL
Better
Best
Good
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
Gas and Powder-Actuated Fastening Systems
1
PTP-27LMAGR
(Page 192)
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
Tool Application Matrix
Powder-Actuated Fastening Systems
This matrix matches Simpson Strong-Tie® powder-actuated tools with the trades that would typically use each tool.
The selection is based upon the features of the tool matching the needs of the trade.
Heavy-Duty
Tool
PT-27HD
(Page 194)
FEATURES
tHeavy Duty
tSingle
.27 Caliber
Shot Long
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
t 3⁄8" Threaded
Stud
Sprinkler
Tool with
Stop Spall
PT-27
(Page 195)
tSemiAutomatic
tVersatile
tReliable
Professional
Grade Tool
t2 1⁄2" Pin
Capacity
(4" Pin w/
Washer)
PT-22
(Page 196)
PT-22GS
(Page 197)
tSingle Shot
tSingle Shot
ngle Shot
tSingle
tEconomical
ProfessionalGrade Tool
tInline
Trigger Tool Easier to use
than hammerhit tool
tHammer
Activated
tVersatile,
Professional
Grade Tool
t3" Pin
Capacity
(4" Pin w/
Washer)
tMedium Duty
tMedium Duty
t2 1⁄2" Pin
Capacity
t3" Pin
Capacity
(4" Pin w/
Washer)
Good
ELECTRICAL
Good
Good
Good
GENERAL
Better
Good
Good
FRAMER
Good
Good
Good
t1 1⁄2" Pin
Capacity
t2" Pin w/
washer
Best
Good
Best
Better
Good
ACOUSTICAL/
OVERHEAD
Better
Good
Good
REMODELING
Better
Best
Best
Best
CARPENTRY
Best
Better
Better
Better
GLAZING
Good
Good
Good
HVAC
Better
FLOORING
PT-22P
(Page
age 199)
tSingle
Single
ngle Shot
DRYWALL
PLUMBING/
FIRE SPRINKLER
PT-22H
(Page 198)
Gas and Powder-Actuated Fastening Systems
tReliable
Design
General-Purpose Tools
Better
Good
Best
Better
RENTAL
189
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
Tool / Load / Fastener Matrix
Powder-Actuated Fastening Systems
This matrix matches Simpson Strong-Tie® Powder-Actuated Tools with the powder
loads and fasteners that would typically be used with each tool.
Premium Tools
Fasteners
Page
No.
PTP-27L
(Page 192)
PTP-27LMAGR
(Page 192)
PTP-27S
(Page 193)
PTP-27SMAGR
(Page 193)
Loads
P22AC1 thru 4
200
P25SL3 thru 5
200
P27SL2 thru 5
200
All
All
All
All
P27SL6
200
Yes
Yes
Yes
Yes
P27LVL3 thru 6
200
PDP-XXX
201
Max 2 1⁄2"
Max 1 1⁄2"
PDPA-XXX
201
Max 2 1⁄2
All
PDPH-XXX
201
All
Max 1 1⁄2"
PDPW-XXX
202
All
Max 2"
PDPWL-XXX
202
All
Max 2"
PDPHWL-XXX
202
All
Max 2"
PDPWLMG-XXX
202
All
Max 2"
PINW-XXX
202
All
Max 2"
PINWP-XXX
203
Max 2 1⁄2"
Max 1 1⁄2"
PDPT-XXX
203
All
All
PHBC-XXX
203
Max 2 ⁄2"
Max 1 1⁄2"
PBXDP-XXX
203
All
All
PCCXXX-DPXXX
203
All
All
PECLDP-XXX
203
All
All
PCLDP-XXX
203
All
All
PSLV4-XXXXXX
204
All
Max 1 1⁄2"
1
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
Gas and Powder-Actuated Fastening Systems
.300 Headed Pins
8mm Headed Pins
PHN-XXX
204
Max 2 1⁄2"
Max 1 5⁄8"
PHNW-XXX
205
All
Max 2"
PHNT-XXX
205
All
PHSNA-XXX
206
PTRHX-HN32
206
PKP-250
206
All
Max 2 ⁄8"
All
All
⁄8" Headed Pins / Threaded Studs
3
190
PHV3-XXX
203
PSLV3-XXXXXX
204
Max 1 1⁄4"
7
All
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
Tool / Load / Fastener Matrix
Powder-Actuated Fastening Systems
This matrix matches Simpson Strong-Tie® Powder-Actuated Tools with the powder
loads and fasteners that would typically be used with each tool.
Fasteners
Page
No.
Heavy-Duty
Tool
PT-27HD
(Page 194)
General-Purpose Tools
PT-27
(Page 195)
PT-22
(Page 196)
PT-22GS
(Page 197)
PT-22H
(Page 198)
All
All
PT-22P
(Page 199)
LOADS
P22AC1 thru 4
200
P25SL3 thru 5
200
P27SL2 thru 5
200
P27SL6
200
P27LVL3 thru 6
200
All
All
All
PDP-XXX
201
PDPA-XXX
All
Max 2 1⁄2"
All
All
Max 2 1⁄2"
Max 2 1⁄2"
201
All
All
All
Max 2 1⁄2"
All
PDPH-XXX
201
Max 2 1⁄2"
Max 2 1⁄2"
All
Max 2 1⁄2"
Max 2 1⁄2"
PDPW-XXX
202
All
All
All
All
All
PDPWL-XXX
202
All
All
All
All
All
PDPHWL-XXX
202
All
All
All
All
All
PDPWLMG-XXX
202
All
All
All
All
All
PINW-XXX
202
All
All
All
All
All
PINWP-XXX
203
Max 2 1⁄2"
All
All
All
Max 2 1⁄2"
PDPT-XXX
203
All
All
All
All
All
PHBC-XXX
203
Max 2 1⁄2"
All
All
All
Max 2 1⁄2"
PBXDP-XXX
203
All
All
All
All
All
PCCXXX-DPXXX
203
All
All
All
All
All
PECLDP-XXX
203
All
All
All
All
All
PCLDP-XXX
203
All
All
All
All
All
PSLV4-XXXXXX
204
All
All
All
All
All
All
Gas and Powder-Actuated Fastening Systems
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
.300 HEADED PINS
8MM HEADED PINS
PHN-XXX
204
PHNW-XXX
All
Max 2 1⁄2"
All
All
All
Max 2 1⁄2"
205
All
All
All
All
All
PHNT-XXX
205
All
All
All
All
All
PHSNA-XXX
206
PTRHX-HN32
206
All
All
All
All
All
PKP-250
206
All
All
All
⁄8" HEADED PINS / THREADED STUDS
3
PHV3-XXX
203
All
PSLV3-XXXXXX
204
All
191
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
PTP-27L & PTP-27LMAGR
Premium Tools
FEATURES:
tPTP-27L: Automatic fastening: no sliding barrel,
just load and shoot
NEW
tPTP-27LMAGR:
Fully automatic tool with fastener magazine
tCan be converted to a single-shot tool
BOTH TOOLS FEATURE:
t"EKVTUBCMFQPXFSGPSGBTUFOJOHWFSTBUJMJUZ
t&BTZEJTBTTFNCMZGPSDMFBOJOHBOENBJOUFOBODF
t/PNBOVBMSFTFUUJOHPGQJTUPOSFRVJSFE
PTP-27L
t0QFSBUPSDPNGPSUDVTIJPOFEHSJQSFEVDFESFDPJM
and sound dampening muffler for quiet operation
Adjustable power
increases versatility
SPECIFICATIONS:
PTP-27LMAGR
t'BTUFOFS-FOHUI
PTP-27L – 1⁄2" thru 2 1⁄2" (3" or 4" washered)
PTP-27LMAGR – 5⁄8" thru 3"
t'BTUFOFS5ZQFPSNNEJBNFUFS
KEY FASTENING APPLICATIONS:
t8PPEGSBNJOHBQQMJDBUJPOT
t8BTIFSFEQJOJOTUBMMBUJPO1514BOE151-POMZ
t*OTVMBUJPOGBTUFOJOH1514BOE151-POMZ
t'PSNJOHXPSL
TOOL IS SOLD IN A RUGGED TOOL BOX
COMPLETE WITH:
t0QFSBUPSTNBOVBM
t4QBMMTVQQSFTTPS
t5PPMTGPSEJTBTTFNCMZ
t4BGFUZHMBTTFTFBSQMVHT
t5PPMMVCSJDBOU
t$MFBOJOHCSVTIFT
t0QFSBUPSTFYBNBOEDBVUJPOTJHO
t5PPMCPYBMTPTPMETFQBSBUFMZ
t(MPWFT
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
Gas and Powder-Actuated Fastening Systems
t'JSJOH"DUJPO151-o"VUPNBUJD
PTP-27LMAGR – Fully automatic
t-PBE$BMJCFSTUSJQMPBET
brown through purple (Levels 2–6)
t-FOHUI1⁄4" (PTP-27L), 19 1⁄2" (LMAGR)
t8FJHIU151-oMCT
PTP-27LMAGR – 8.8 lbs.
The patent pending, quick-disconnect
baseplate makes it easy to convert the
PTP-27LMAGR from a magazine to a
single-shot tool
OPTIONS:
t&YUFOTJPOQPMFUPPMGPSUIF151-BWBJMBCMF
in 6' and 8' lengths.
th5PPM1&51,5h5PPM1&51,5
t4JOHMFTIPUDPOWFSTJPOLJU151-9$0/
Extension Pole Tool (for the PTP-27L) - See page 187 for details
Common Repair Parts - PTP-27LMAGR
Common Repair Parts - PTP-27L
The full line of Simpson Strong-Tie® Powder
Loads and Fasteners begins on page 200.
192
Description
Model No.
Baseplate
Nosepiece
Piston
Piston Disc
Rubber Returner
PTP-274800
PTP-273820
PTP-273320
PTP-273306
PTP-274305
Description
Magazine (Complete)
Nosepiece
Nosepiece Screw
Piston
Piston Disc
Rubber Returner
1. See page 207 for tool repair and maintenance kits. Complete tool schematics
and parts list available at www.strongtie.com.
Model No.
PTP-LMAGR
PTP-276820
PTP-275826
PTP-276320
PTP-273306
PTP-274305
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
PTP-27S & PTP-27SMAGR
Premium Tools
FEATURES:
tPTP-27S: Automatic fastening: no sliding
barrel, just load and shoot
tPTP-27SMAGR: Fully automatic tool with
rotating fastener magazine
tCan be converted to a single shot tool
Both Tools Feature:
t"EKVTUBCMFQPXFSGPSGBTUFOJOHWFSTBUJMJUZ
t0QFSBUPSDPNGPSUDVTIJPOFEHSJQSFEVDFESFDPJM
and sound dampening muffler for quiet operation
t/PNBOVBMSFTFUUJOHPGQJTUPOSFRVJSFE
t&BTZEJTBTTFNCMZGPSDMFBOJOHBOENBJOUFOBODF
SPECIFICATIONS:
PTP-27S
Adjustable power
increases versatility
PTP-27SMAGR
t'BTUFOFS-FOHUI1514o1⁄2" thru 15⁄8"
PTP-27SMAGR – 1⁄2" thru 1 1⁄4"
t'BTUFOFS5ZQFPSNNEJBNFUFS
t'JSJOH"DUJPO1514o"VUPNBUJD
PTP-27SMAGR – Fully automatic
t-PBE$BMJCFSTUSJQMPBET
brown through red (Levels 2–6)
t-FOHUI3⁄4" (PTP-27S), 17 1⁄2" (LMAGR)
t8FJHIU1514oMCT
PTP-27SMAGR – 8.1 lbs.
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
TOOL IS SOLD IN A RUGGED TOOL BOX
COMPLETE WITH:
t0QFSBUPSTNBOVBM
t4QBMMTVQQSFTTPS
t5PPMTGPSEJTBTTFNCMZ
t4BGFUZHMBTTFTFBSQMVHT
t5PPMMVCSJDBOU
t$MFBOJOHCSVTIFT
t0QFSBUPSTFYBNBOEDBVUJPOTJHO
t5PPMCPYBMTPTPMETFQBSBUFMZ
t(MPWFT
Rotating magazine allows
for installation flexibility
The patent-pending quick-disconnect
baseplate makes it easy to convert the
PTP-27SMAGR from a magazine to a
single shot tool
Collated pins for fully
automatic fastening and
quick loading
Gas and Powder-Actuated Fastening Systems
KEY FASTENING APPLICATIONS:
PTP-27S:
PTP-27SMAGR:
t$POEVJUDMJQT
t%SZXBMMUSBDL
t$FJMJOHDMJQT
t)BUDIBOOFM
t%SZXBMMUSBDL
t)7"$EVDUTUSBQT
t.FUBMEFDLJOH
OPTIONS:
t&YUFOTJPOQPMFUPPMGPSUIF1514BWBJMBCMF
in 6' and 8' lengths.
6' Tool: PET-6PKT
8' Tool: PET-8PKT
t4JOHMFTIPUDPOWFSTJPOLJU1514$0/
Extension Pole Tool (for the PTP-27S) - See page 187 for details
Common Repair Parts - PTP-27SMAGR
Common Repair Parts - PTP-27S
The full line of Simpson Strong-Tie® Powder
Loads and Fasteners begins on page 200.
Description
Model No.
Baseplate
Nosepiece
Piston
Piston Disc
Rubber Returner
PTP-273800
PTP-273820
PTP-273320
PTP-273306
PTP-273305
Description
Magazine Body
Nosepiece
Nosepiece Screw
Piston
Piston Disc
Rubber Returner
Model No.
PTP-741000
PTP-740001
PTP-750002
PTP-842001
PTP-730071CH
PTP-742101
1. See page 207 for tool repair and maintenance kits. Complete tool schematics
and parts list available at www.strongtie.com.
193
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
PT-27HD
1
⁄4" and 3⁄8" Heavy-Duty Stud Driver
FEATURES:
t-PXSFDPJMXIFOTFUUJOH3⁄8" fasteners into steel
or hard concrete
t$POTJTUFOUBOESFMJBCMFQFSGPSNBODF
t&BTZEJTBTTFNCMZGPSDMFBOJOHBOENBJOUFOBODF
SPECIFICATIONS:
t'BTUFOFS-FOHUI1⁄2" thru 3"
t'BTUFOFS5ZQFT3⁄8" heavy-duty drive pins,
.177 shank pins, 1⁄4"-20 threaded studs
and 3⁄8"-16 threaded studs
t'JSJOH"DUJPO4JOHMFTIPU
t-PBE$BMJCFSMPOHTJOHMFMPBET
green through purple (Levels 3–6)
t-FOHUI1⁄4"
t8FJHIUMCTP[
PT-27HD
KEY FASTENING APPLICATIONS:
t 3⁄8" sprinkler fastenings
TOOL IS SOLD IN A RUGGED TOOL BOX
COMPLETE WITH:
t0QFSBUPSTNBOVBM
t4QBMMTVQQSFTTPS
tNNBOENNGBTUFOFSHVJEFT
tNNBOENNQJTUPOT
t4NBMMCBTFQMBUF
t4UBCJMJ[FS
t3BNSPE
t5PPMTGPSEJTBTTFNCMZ
t4BGFUZHMBTTFTFBSQMVHT
t5PPMMVCSJDBOU
t$MFBOJOHCSVTIFT
t0QFSBUPSTFYBNBOEDBVUJPOTJHO
tFYUSBTUPQSJOHT
Common Repair Parts - PT-27HD
Description
Model No.
8mm Piston
8mm Fastener Guide
10mm Piston
10mm Fastener Guide
Stop Ring
PTHD-P8
PTHD-G8
PTHD-P10
PTHD-G10
PTHD-SR
The full line of Simpson Strong-Tie® Powder
Loads and Fasteners begins on page 200.
194
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
Gas and Powder-Actuated Fastening Systems
t)FBWZEVUZGBTUFOJOHJOUPDPODSFUFTUSFOHUIT
up to 8,000 psi, and structural steel
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
PT-27
General-Purpose Tool
FEATURES:
t3FMJBCMFEFTJHOPGUIFXPSMETNPTUQPQVMBSUPPM
t4FNJBVUPNBUJDBOEGBTUDZDMJOH
t&OHJOFFSFEGPSDPOUJOVPVTVTFIJHISFMJBCJMJUZ
and low maintenance
SPECIFICATIONS:
t'BTUFOFS-FOHUI1⁄2" through 2 1⁄2" (3" or 4" washered)
t'BTUFOFS5ZQFPSNNIFBEFEGBTUFOFST
or 1⁄4"-20 threaded studs
t'JSJOH"DUJPO4FNJBVUPNBUJD
t-PBE$BMJCFSTUSJQMPBET
brown through red (Levels 2–5)
t-FOHUI13 1⁄2"
t8FJHIUMCTP[
KEY FASTENING APPLICATIONS:
PT-27
t"DPVTUJDBMDFJMJOHT
t&MFDUSJDBMBQQMJDBUJPOT
t'SBNJOHNFNCFST
t%SZXBMMUSBDL
t8BUFSQSPPmOHNBUFSJBMBOEPSMBUIJOH
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
Gas and Powder-Actuated Fastening Systems
TOOL IS SOLD IN A RUGGED TOOL BOX
COMPLETE WITH:
t0QFSBUPSTNBOVBM
t4QBMMTVQQSFTTPS
t5PPMTGPSEJTBTTFNCMZ
t4BGFUZHMBTTFTFBSQMVHT
t5PPMMVCSJDBOU
t$MFBOJOHCSVTIFT
t0QFSBUPSTFYBNBOEDBVUJPOTJHO
OPTION:
t&YUFOTJPOQPMFUPPMBWBJMBCMFJOhBOEhMFOHUIT
6' Tool: PET-6SMKT
8' Tool: PET-8SMKT
Common Repair Parts
Description
Model No.
Annular Spring
Ball Bearing (6mm)
Barrel
Baseplate
Piston - Concave
(includes ring)
Piston - Flat
(includes ring)
Piston Ring
Piston Stop
Shear Clip
PT-301014
PT-301013
PT-301006
PT-301009
PT-301217
PT-301903
PT-301208
PT-301012
PT-301011
1. See page 207 for tool repair and
maintenance kits. Complete tool
schematics and parts list available
at www.strongtie.com.
The full line of Simpson Strong-Tie® Powder
Loads and Fasteners begins on page 200.
Extension Pole Tool - See page 187 for details
195
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
PT-22
General-Purpose Tool
FEATURES:
t4JOHMFTIPUmSJOH
t&OHJOFFSFEGPSDPOUJOVPVTVTFIJHISFMJBCJMJUZ
and low maintenance
SPECIFICATIONS:
t'BTUFOFS-FOHUI1⁄2" through 2 1⁄2" (3" & 4" washered)
t'BTUFOFS5ZQFPSNNIFBEFEGBTUFOFST
or 1⁄4"-20 threaded studs
t-PBE$BMJCFSTJOHMFMPBETHSBZUISPVHIZFMMPX
(Levels 1–4). Note: Not for use with 22 caliber
straight wall loads
t-FOHUI7⁄8"
t8FJHIUMCT
KEY FASTENING APPLICATIONS:
t'VSSJOHTUSJQT
PT-22
t'SBNJOHQJOT
t&MFDUSJDBMCPYFT
TOOL IS SOLD IN A RUGGED TOOL BOX
COMPLETE WITH:
t0QFSBUPSTNBOVBM
t4QBMMTVQQSFTTPS
t5PPMTGPSEJTBTTFNCMZ
t4BGFUZHMBTTFTFBSQMVHT
t$MFBOJOHCSVTIFT
t0QFSBUPSTFYBNBOEDBVUJPOTJHO
*These items not supplied with the PT-22-RB
retail package.
Common Repair Parts
Description
Model No.
Nosepiece
Piston Buffer
Piston Reset Cap
Piston Reset Pin
Piston Reset Spring
Piston with Ring
PTM-DC106
PTM-01114
PTM-03108 1
PTM-01107 2
PTM-03122 3
PT-DC112
1. Model PT-DC108 for tools with a serial
number below 5000.
2. Model PT-DC107 for tools with a serial
number below 5000.
3. Model PT-DC122 for tools with a serial
number below 5000.
4. See page 207 for tool repair and maintenance kits.
Complete tool schematics and parts list available
at www.strongtie.com.
The PT-22 is sold individually in a tool box with
accessories or in a retail package (see below).
PT-22 Retail Package Product Data
Description
Model
No.
Qty. of
Tools Per
Retail
Package
Qty. of
Retail
Packages
Per Carton
.22 Caliber,
Single-Shot,
TriggerActivated
Tool
PT-22-RB
1
2
PT-22-RB
196
The full line of Simpson Strong-Tie® Powder
Loads and Fasteners begins on page 200.
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
Gas and Powder-Actuated Fastening Systems
t$FJMJOHDMJQT
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
PT-22GS
General-Purpose Tool - Grip Shot™
FEATURES:
t#BSSFMUSJHHFSBMMPXTGPSTBGFBOEFBTZPQFSBUJPO
t.FEJVNEVUZUPPMEFTJHOFEGPSFBTFPGVTF
low maintenance and economy
SPECIFICATIONS:
t'BTUFOFS-FOHUI›UISPVHIXBTIFSFE
t'BTUFOFS5ZQFPSNNIFBEFE
fasteners or 1⁄4"-20 threaded studs
t'JSJOH"DUJPO4JOHMFTIPU
t-Pad Caliber: .22 single “A” crimp loads, gray
through yellow (Levels 1–4). Note: Not for use
with .22 caliber straight wall loads
PT-22GS
t-FOHUI
t8FJHIUMCT
KEY FASTENING APPLICATIONS:
t'SBNJOHNFNCFST
t'VSSJOHTUSJQT
t&MFDUSJDBMCPYFT
t$FJMJOHDMJQT
Description
Model
No.
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
.22 Caliber,
Single-Shot,
PT-22GS-RB
Barrel-Trigger
Tool
Qty. of
Qty. of
Tools Per
Retail
Retail
Packages
Package Per Carton
1
2
The barrel trigger allows for
easier and safer fastening.
The full line of Simpson Strong-Tie® Powder
Loads and Fasteners begins on page 200.
Gas and Powder-Actuated Fastening Systems
PT-22GS Grip Shot™ Product Data
The PT-22GS-RB is packaged
in a retail clamshell ready for
merchandising.
197
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
PT-22H
General-Purpose Tool
FEATURES:
t)BNNFSBDUJWBUFE
t&OHJOFFSFEGPSMPXNBJOUFOBODFBOEFDPOPNZ
t'PVSMFWFMTPGQPXFS(SBZUISPVHIZFMMPXMPBET
(levels 1–4)
SPECIFICATIONS:
t'BTUFOFS-FOHUI1⁄2" through 3"
t'BTUFOFS5ZQFPSNNIFBEFEGBTUFOFST
or 1⁄4"-20 threaded studs
PT-22H
t'JSJOH"DUJPO4JOHMFTIPUIBNNFSBDUJWBUFE
t-Pad Caliber: .22 single “A” crimp loads, gray through
yellow (Levels 1–4). Note: Not for use with .22 caliber
straight wall loads
t-FOHUI1⁄4"
t8FJHIUMCTP[
KEY FASTENING APPLICATIONS:
t3FNPEFMJOH
PT-22H Retail Package Product Data
Description
Model
No.
.22 Caliber,
Single–Shot
Hammer– PT-22H-RB
Activated
Tool
Qty. of
Tools Per
Retail
Package
Qty. of
Retail
Packages
Per Carton
1
4
The full line of Simpson Strong-Tie® Powder
Loads and Fasteners begins on page 200.
The PT-22H-RB comes packaged
in a retail clamshell ready for
merchandising.
198
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
Gas and Powder-Actuated Fastening Systems
t.BJOUFOBODF
t&MFDUSJDBM
t5FMFDPNNVOJDBUJPOT
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
PT-22P
Powder-Actuated Tool
The PT-22P is a single-shot fastening tool
engineered for continuous use, high reliability
and low maintenance. The all-aluminum body
of the PT-22P also provides rugged durability.
KEY FASTENING APPLICATIONS:
tDrywall track
tFurring strips
tFraming pins
PT-22P
tElectrical boxes
tCeiling clips
SPECIFICATIONS:
tFastener Length: ½"–1½"
tFastener Type: .300" or 8mm headed
fasteners or ¼"-20 threaded studs
tFiring Action: Single shot
tLoad Caliber: .22 single loads, gray
through yellow (Levels 1–4). Note: Not for
use with 22 caliber straight wall loads
tLength: 14"
tWeight: 4 lbs. 7 oz.
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
The PT-22P is sold individually
in a tool box with accessories.
Common Repair Parts
Description
Model No.
Nosepiece
PT-22P-01
Stop Pin Cover
PT-22P-17
Barrel Stop Pin
PT-22P-20
Barrel Stop Pin Spring
PT-22P-21
Piston with Ring
PT-22P-02
Gas and Powder-Actuated Fastening Systems
TOOL IS SOLD IN A RUGGED TOOL BOX
tComplete with:
tOperator’s manual
tSpall suppressor
tTools for disassembly
tSafety glasses / ear plugs
tCleaning brushes
tOperator’s exam and caution sign
tOne additional piston
The full line of Simpson Strong-Tie® Powder
Loads and Fasteners begins on page 200.
199
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
Powder Loads
For Simpson Strong-Tie® Powder-Actuated Tools
.22 Caliber “A” Crimp Loads – Single Shot
Pack
Qty.
.22 Cal. - Gray (Level 1)
P22AC1
100
P22AC2
100
.22 Cal. - Brown (Level 2)
P22AC2A-R100 100
P22AC3
100
.22 Cal. - Green (Level 3)
P22AC3A-R100 100
P22AC4
100
.22 Cal. - Yellow (Level 4)
P22AC4-R100 100
Description
Model
Carton
Qty.
10,000
10,000
100
10,000
100
10,000
100
Compatible Tools
Simpson Strong-Tie
Others
PT-22
PT-22GS
PT-22H
721, U-2000,
DX-37E,
DX72E, 4170 and
model 70, System
3 and most lowvelocity, singleshot tools
P22AC
.22 Caliber Straight Wall Loads – Single Shot
Description
Model
.22 Cal. - Yellow (Level 4)
.22 Cal. - Red (Level 5)
.22 Cal. - Purple (Level 6)
.22 Cal. - Gray (Level 7)
P22LRSC4
P22LRSC5
P22LRSC6
P7LRSC
Pack Carton Compatible
Qty. Qty.
Tools
100
100
100
100
10,000
10,000
10,000
10,000
Ladd Tools
and some
special
application
tools.
Note:
Not for use with
Simpson Strong-Tie
PT-22, PT-22GS, or
PT-22H tools.
P22LRSC
Description
.25 Cal. - Green (Level 3)
.25 Cal. - Green BULK PACK
.25 Cal. - Yellow (Level 4)
.25 Cal. - Yellow BULK PACK
.25 Cal. - Red (Level 5)
.25 Cal. - Red BULK PACK
Model
Pack
Qty.
Carton
Compatible Tools
Qty.
P25SL3
100 10,000
P25SL3M 1,000 5,000
P25SL4
100 10,000
P25SL4M 1,000 5,000
P25SL5
100 10,000
P25SL5M 1,000 5,000
P25SL
DX-35, R35S
.27 Caliber Single Shot Loads – Long
Description
Model
Pack
Qty.
Carton
Qty.
.27 Cal. - Green (Level 3)
.27 Cal. - Yellow (Level 4)
.27 Cal. - Red (Level 5)
.27 Cal. - Purple (Level 6)
P27LVL3
P27LVL4
P27LVL5
P27LVL6
100
100
100
100
10,000
10,000
10,000
10,000
Compatible Tools
Simpson Strong-Tie
Others
PT-27HD
HG-100
DX-600N
MD-380
R6000
P27LVL
.27 Caliber Plastic, 10-Shot Strip Loads
Description
Model
P27SL2
P27SL2A-R100
P27SL3
.27 Cal. - Green (Level 3)
P27SL3A-R100
.27 Cal. - Green BULK PACK
P27SL3M
P27SL4
.27 Cal. - Yellow (Level 4)
P27SL4A-R100
.27 Cal. - Yellow BULK PACK
P27SL4M
P27SL5
.27 Cal. - Red (Level 5)
P27SL5A-R100
.27 Cal. - Red BULK PACK
P27SL5M
.27 Cal. - Brown (Level 2)
.27 Cal. - Purple (Level 6)
200
P27SL6
Compatible Tools
Carton
Qty. Simpson Strong-Tie
Others
10,000
DX-350, DX-351,
100
DX-36, DX-A40
10,000
(except PT27SL2),
100
DX-A41 (except
5,000
PT27SL2 and
PTP-27L,
10,000
PT27SL3), DX-460,
PTP-27MAGR,
DX-450, DX-451,
PTP-27S,
100
PTP-27SMAGR, System 1H, P-36B,
5,000
A-40B, A-41B,
PT-27
10,000
Cobra and most .27
100
caliber-clone tools
5,000
DX-450, DX-451,
100 10,000
DX-A41
Pack
Qty.
100
100
100
100
1,000
100
100
1,000
100
100
1,000
Note: An "A" in a part number denotes imported load. Non-A part number denotes domestic loads.
P27SL
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
Gas and Powder-Actuated Fastening Systems
.25 Caliber Plastic 10-Shot Strip Loads
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
Fasteners
For Simpson Strong-Tie® Powder-Actuated Tools
.300" Headed Fasteners with .157" Shank Diameter
PDPA Drive Pins - For Structural Steel and Extra Hard Concrete
t'PS"BOE"(SBEFTUSVDUVSBMTUFFMSFETUSJQMPBESFDPNNFOEFE
tEJBNFUFSGPSHSFBUFSDPNQSFTTJWFTUSFOHUI
t.BOVGBDUVSFEXJUIUJHIUUPMFSBODFTGPSTVQFSJPSQFSGPSNBODF
Length (in.)
Model
1
⁄2
⁄2 knurled
1
⁄2 knurled
5
⁄8 knurled
5
⁄8 knurled
3
⁄4
3
⁄4
1
1 1⁄4
1 1⁄2
1 7⁄8
2
2 1⁄2
2 7⁄8
PDPA-50
PDPA-50K
PDPA-50KM
PDPA-62K
PDPA-62KM
PDPA-75
PDPA-75M
PDPA-100
PDPA-125
PDPA-150
PDPA-178
PDPA-200
PDPA-250
PDAP-278
1
Pack Qty
Carton Qty
100
100
1000
100
1000
100
1000
100
100
100
100
100
100
100
1000
1000
5000
1000
5000
1000
5000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Compatible Tools
Simpson Strong-Tie
Others
PTP-27L,
PTP-27S,
PT-27,
PT-22P
PT-22,
PT-22GS,
PT-22H,
PT-27HD,
721**, D-60, U-2000,
System 1, System 3
and most other lowvelocity tools.
PDPA
.300" Headed Fasteners with .145" Shank Diameter
Length
(in.)
Pack
Qty.
Carton
Qty.
PDP-100
PDP-100M
PDP-125
PDP-150
PDP-175
PDP-200
PDP-225
PDP-250
PDP-300
100
–
100
100
100
100
100
100
100
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Compatible Tools
Simpson Strong-Tie
PTP-27L*
PTP-27S**
PT-27*
PT-22
PT-22GS
PT-22H
Others
721**, D-60,
U-2000,
System 1,
System 3 and
most other lowvelocity tools.
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
PDP
.300" Headed Fasteners with .177" Shank Diameter
Length
(in.)
⁄2
1
⁄2 Knurled
5
⁄8 Knurled
3
⁄4
1
1 1⁄4
1 1⁄2
1 3⁄4
2
2 1⁄2
3
1
Model
Pack
Qty.
Carton
Qty.
PDPH-50
PDPH-50K
PDPH-62K
PDPH-75
PDPH-100
PDPH-125
PDPH-150
PDPH-175
PDPH-200
PDPH-250
PDPH-300
100
100
100
100
100
100
100
100
100
100
100
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
See pages
210 and 213
for load value
information.
Compatible Tools
Simpson Strong-Tie
PTP-27L*
PTP-27S**
PT-27*
PT-22P
PT-22
PT-22GS
PT-22H
Others
721**, D-60,
U-2000,
System 1,
System 3 and
most other lowvelocity tools.
*Up to 21⁄2", ** Up to 1 1⁄2"
PDPH
See page 209
for load value
information.
316 Stainless Steel .300" Headed Fasteners with .145" Shank Diameter
Length
(in.)
⁄2
1
⁄2 Knurled
5
⁄8 Knurled
3
⁄4
1
1 1⁄4
1 1⁄2
1 3⁄4
2
2 1⁄2
3
*Up to 21⁄2", ** Up to 1 1⁄2"
1
Gas and Powder-Actuated Fastening Systems
1
1 – BULK PACK
1 1⁄4
1 1⁄2
1 3⁄4
2
2 1⁄4
2 1⁄2
3
Model
See pages
208 – 210
and 213 for
load value
information.
Model
Pack
Qty.
Carton
Qty.
PDP-50SS
PDP-50KSS
PDP-62KSS
PDP-75SS
PDP-100SS
PDP-125SS
PDP-150SS
PDP-175SS
PDP-200SS
PDP-250SS
PDP-300SS
100
100
100
100
100
100
100
100
100
100
100
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Compatible Tools
Simpson Strong-Tie
PTP-27L*
PTP-27S**
PT-27*
PT-22P
PT-22
PT-22GS
PT-22H
Others
721**, D-60,
U-2000,
System 1,
System 3 and
most other lowvelocity tools.
PDPSS
201
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
For Simpson Strong-Tie® Powder-Actuated Tools
.300" Headed Fasteners with .145" Shank Diameter –
Mechanically Galvanized
Length
(in.)
Model
Compatible Tools
Pack Carton
Qty. Qty. Simpson Strong-Tie
Others
2
PDP-200MG 100
2 1⁄2
PDP-250MG 100
1,000 PTP-27L*,
PTP-27S**,
PT-27*
1,000 PT-22P
PDP-300MG 100
PT-22
PT-22GS,
1,000 PT-22H
3
.300" Headed Fasteners with .177" Shank
Diameter – Mechanically Galvanized
721**, D-60,
U-2000,
System 1,
System 3 and
most other low
velocity
tools.
Mechanical Galvanizing meets ASTM B695, Class 65,
Type 1. *Up to 21⁄2", **Up to 1 1⁄2"
PDPMG
Gas and Powder-Actuated Fastening Systems
.300" Headed Fasteners with .145" Shank
Diameter and 3⁄4" Metal Washers
Length
(in.)
Model
3
⁄4
PDPW-75
See pages 209 for load
value information.
Compatible Tools
Pack Carton
Qty. Qty. Simpson Strong-Tie
100
1,000
2
PDPW-200 100
2 1⁄2
PDPW-250 100
1,000 PTP-27L
PTP-27S*
1,000
PT-27
1,000 PT-22P
PT-22
1,000
PT-22GS
1,000 PT-22H
3
PDPW-300 100
1,000
1
PDPW-100 100
1 1⁄4
PDPW-125 100
1 1⁄2
PDPW-150 100
Others
PDPW
*Up to 2"
Model
Compatible Tools
Simpson
Others
Strong-Tie
PTP-27L
1,000 PT-27HD
721*, D-60,
PT-27
U-2000, System
1,000 PT-22P
1, System 3 and
PT-22
most other low
velocity tools.
1,000 PT-22GS
PT-22H
Pack Carton
Qty. Qty.
2
PDPH-200MG 100
2 1⁄2
PDPH-250MG 100
3
PDPH-300MG 100
Mechanical Galvanizing meets ASTM B695, Class 65,
Type 1. *Up to 21⁄2", **Up to 1 1⁄2"
PDPHMG
.300" Headed Fasteners with .145" Shank
Diameter and 1" Metal Washers
Length
(in.)
721*,
D-60,
U-2000,
System 1,
System 3
and most
other low
velocity
tools.
1
1 1⁄4
1 1⁄2
2
2 1⁄2
3
3
4
See page 209 for load
value information.
Compatible Tools
Pack Carton
Qty. Qty. Simpson
Others
Strong-Tie
PDPWL-100
100 1,000
721*,
PDPWL-125
100 1,000
D-60,
PTP-27L
PDPWL-150
100 1,000 PTP-27S* U-2000,
System 1,
PDPWL-200
100 1,000 PT-27
System 3
PDPWL-250
100 1,000 PT-22P
PT-22
and most
PDPWL-300
100 1,000 PT-22GS
other low
PDPWL-300M – 1,000 PT-22H
velocity
tools.
PDPWL-400
100 1,000
Model
.300" Headed Fasteners with .145" Shank
Diameter and 1" Metal Washers – Mechanically
Galvanized with Protective Sleeve
*Up to 2"
t1SPWJEFTBEEFEDPSSPTJPOQSPUFDUJPOJOQSFTFSWBUJWFUSFBUFE
lumber. Visit www.strongtie.com for corrosion information.
.300" Headed Fasteners with
1" Metal Washers with .177" Shank Diameter
t1MBTUJDTMFFWFQSPUFDUTBOEQSFTFSWFTDPBUJOHEVSJOH
installation; washer will not scrape off coating.
.300"
Headed Fasteners with 1" Metal Washers –
t1MBTUJDTMFFWFQSFWFOUTXBTIFSTMJQQJOHEVSJOH
Mechanically
installation.Galvanized with Protective Sleeve
Length
(in.)
Model
2
PDPWL-200MG
2 1⁄2
PDPWL-250MG
Compatible Tools
Pack Carton
Qty. Qty. Simpson Strong-Tie
100 1,000
PTP-27L
PTP-27S*
100 1,000 PT-27
PT-22P
3
3
100 1,000 PT-22
PT-22GS
PT-22H
PDPWLS-300MG – 1,000
PDPWL-300MG
Others
721*,
D-60,
U-2000,
System 1,
System 3
and most
other low
velocity
tools.
316 Stainless Steel .300" Headed Fasteners
with .145" Shank Diameter and 1" Metal Washers*
Length
(in.)
1
Model
PDPWL-100SS 100 1,000
3
4
PDPWL-400SS 100 1,000
1 ⁄2
1
2
2 1⁄2
PDPWLMG
See page 209 for load
value information.
Compatible Tools
Pack Carton
Qty. Qty. Simpson Strong-Tie Others
PDPWL-125SS 100 1,000 PTP-27L
PTP-27S**
PDPWL-150SS 100 1,000
PT-27
PDPWL-200SS 100 1,000 PT-22P
PT-22
PDPWL-250SS 100 1,000
PT-22GS
PDPWL-300SS 100 1,000 PT-22H
1 1⁄4
*Washers are 304 Stainless Steel, **Up to 2"
721**,
D-60,
U-2000,
System 1,
System 3
and most
other low
velocity
tools.
PDPWL
Length
(in.)
Model
1
1 1⁄4
1 1⁄2
2
2 1⁄2
3
PDPHWL-100
PDPHWL-125
PDPHWL-150
PDPHWL-200
PDPHWL-250
PDPHWL-300
4
PDPHWL-400
Compatible Tools
Pack Carton
Qty. Qty. Simpson
Others
Strong-Tie
100 1,000
721*,
PTP-27L
100 1,000 PTP-27S D-60,
U-2000,
100 1,000 PT-27
System 1,
PT-27HD
100 1,000
System 3
PT-22P
and most
100 1,000 PT-22
other low
50
500 PT-22GS
velocity
PT-22H
tools.
50
500
PDPHWL
*Up to 2"
U.S. Patent
8,066,463
Mechanical Galvanizing meets ASTM B695, Class 65, Type 1.
*PDPWLS has a square washer.
202
Length
(in.)
PDPWL-SS
.300" Headed Fasteners with .145" Shank
Diameter and 1 7⁄16" Metal Washers
Length
(in.)
Model
1
1 1⁄4
1 1⁄2
1 3⁄4
2
2 1⁄4
2 1⁄2
3
PINW-100
PINW-125
PINW-150
PINW-175
PINW-200
PINW-225
PINW-250
PINW-300
Pack Carton
Qty. Qty.
50
50
50
50
50
50
50
50
500
500
500
500
500
500
500
500
Compatible Tools
Simpson
Strong-Tie
PTP-27L
PT-27
PT-22P
PT-22
PT-22GS
PT-22H
Others
721,
D-60,
U-2000,
System 1,
System 3
and most
other low
velocity
tools.
PINW
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
Fasteners
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
Fasteners
For Simpson Strong-Tie® Powder-Actuated Tools
.300" Headed Fasteners with .145" Shank Diameter
and 1 3⁄8" Plastic White Washers
Length
(in.)
Model
1
1 1⁄4
1 1⁄2
1 3⁄4
2
2 1⁄2
3
PINWP-100W
PINWP-125W
PINWP-150W
PINWP-175W
PINWP-200W
PINWP-250W
PINWP-300W
Compatible Tools
Pack Carton
Qty. Qty. Simpson
Others
Strong-Tie
50 500
721*, D-60,
50 500 PTP-27L* U-2000,
System 1,
50 500 PT-27*
PT-22P
System 3
50 500
PT-22
and most
50 500 PT-22GS other low50 500 PT-22H
velocity
tools.
50 500
See page 211 for load
value information.
.300" Headed Tophat Fasteners with
.145" Shank Diameter
Length
(in.)
Model
Pack Carton
Qty. Qty.
⁄2 Knurled PDPT-50K 100 1,000
1
⁄8 Knurled PDPT-62K 100 1,000
5
PINWP
3
⁄4
PDPT-75
100 1,000
1
PDPT-100 100 1,000
*Up to 21⁄2"
Compatible Tools
Simpson
Strong-Tie
PTP-27L
PTP-27S
PT-27
PT-22,
PT-22P
PT-22GS
PT-22H
Others
721, D-60,
U-2000,
System 1,
System 3
and most
other lowvelocity tools.
PDPT
Highway Basket Clips – .300" Headed Fasteners with .145" Shank Diameter
Description
Model
Compatible Tools
Pack Carton
Qty. Qty.
Clip with 1 1⁄2" Pin PHBC-150
100
Clip with 2" Pin
PHBC-200
100
Clip with 2 1⁄2" Pin PHBC-250
50
Simpson Strong-Tie
1,000 PTP-27L, PT-27
1,000 PT-22P, PT-22
1,000 PT-22GS, PT-22H
Others
DX-A41,
Autofast
PHBC
Description
Model
BX Cable Strap with 1" Pin
BX Cable Strap with 1 1⁄4" Pin
Conduit Clip 1⁄2" EMT with 1" Pin
Conduit Clip 1⁄2" EMT with 1 1⁄4" Pin
Conduit Clip 3⁄4" EMT with 1" Pin
Conduit Clip 3⁄4" EMT with 1 1⁄4" Pin
Conduit Clip 1" EMT with 1" Pin
Conduit Clip 1" EMT with 1 1⁄4" Pin
PBXDP-100
PBXDP-125
PCC50-DP100
PCC50-DP125
PCC75-DP100
PCC75-DP125
PCC100-DP100
PCC100-DP125
Compatible Tools
Pack Carton
Qty.
Qty. Simpson Strong-Tie
Others
100 1,000
100 1,000 PTP-27L
D-60,
721,
100 1,000 PTP-27S
System 1,
100 1,000 PT-27
PT-22P
System 3,
50
500 PT-22
DX-350
50
1,000 PT-22GS
and most
other tools.
50
500 PT-22H
50
500
Model
Compatible Tools
Pack Carton
Qty. Qty. Simpson Strong-Tie
Others
Compact Ceiling Clip - No Pin
PCL
100
1,000
Compact Ceiling Clip with 1" Pin
PECLDP-100
100
Compact Ceiling Clip with 1" Pin - BULK PACK
PECLDP-100M
Compact Ceiling Clip with 1 ⁄4" Pin
PECLDP-125
Ceiling Clip with 1" Pin
PCLDP-100
100
1,000 PTP-27L
PTP-27S
1,000
PT-27
1,000 PT-22P
PT-22
1,000
PT-22GS
1,000 PT-22H
Ceiling Clip with 1 1⁄4" Pin
PCLDP-125
100
1,000
1
Compact Ceiling Clip with 1 1⁄4" Pin - BULK PACK PECLDP-125M
PBXDP
See pages 210 and 212 for
load value information.
Pre-Assembled Ceiling Clips – .300" Headed Fasteners with .145" Shank Diameter
Description
PCC
–
100
–
See page 212 for load
value information.
DX-350,
System 1,
721 and
most other
tools.
Gas and Powder-Actuated Fastening Systems
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
Pre-Assembled BX Cable Straps and Conduit Straps – .300" Headed Fasteners with .145" Shank Diameter
PCLDP
(PCL similar
without pin)
PECLDP
⁄8" Headed Fasteners* with .177" Shank Diameter
3
Compatible Tools
Pack Carton
Qty. Qty. Simpson Strong-Tie
Others
3
⁄4 Knurled PHV3-75K 100 1,000
DX-451,
1
PHV3-100 100 1,000 PTP-27L
PTP-27S
DX-600,
1 1⁄4
PHV3-125 100 1,000 PT-27
MD-380,
1
1 ⁄2
PHV3-150 100 1,000 PT-22P
DX-A41 I,
R6000 and
2
PHV3-200 100 1,000 PT-27HD
most other
2 Knurled PHV3-200K 100 1,000 PT-22
3
PT-22GS
⁄8" barrel
2 1⁄2
PHV3-250 100 1,000
PT-22H
tools.
3
PHV3-300 100 1,000
Length
(in.)
For alternate overhead fastening,
see the Tie Wire wedge anchor
on page 133 or Tie Wire Crimp
anchor on page 168.
Model
PHV3
*Not intended for use in high-velocity tools.
203
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
Fasteners
For Simpson Strong-Tie® Powder-Actuated Tools
⁄4" – 20 Threaded Studs*
1
Length
(in.)
Model
Pack
Qty.
Carton
Qty.
⁄4 - 20 Knurled (T-1⁄2, S-1⁄2)
1
⁄4 - 20 (T-1⁄2, S-3⁄4)
1
⁄4 - 20 (T-1⁄2, S-1)
1
⁄4 - 20 (T-1⁄2, S-1 1⁄4)
1
⁄4 - 20 (T-3⁄4, S-3⁄4)
1
⁄4 - 20 Knurled (T-3⁄4, S-1⁄2)
1
⁄4 - 20 (T-3⁄4, S-1)
1
⁄4 - 20 (T-3⁄4, S-1 1⁄4)
1
⁄4 - 20 (T-1, S-1)
1
⁄4 - 20 Knurled (T-1 1⁄4, S-1⁄2)
1
⁄4 - 20 (T-1 1⁄4, S-1 1⁄4)
PSLV4-5050K
PSLV4-5075
PSLV4-50100
PSLV4-50125
PSLV4-7575
PSLV4-7550K
PSLV4-75100
PSLV4-75125
PSLV4-100100
PSLV4-12550K
PSLV4-125125
100
100
100
100
100
100
100
100
100
100
100
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1
Compatible Tools
Simpson Strong-Tie
PTP-27L
PTP-27S
PT-27
PT-22P
PT-22
PT-22GS
PT-22H
See pages 211 and 214 for
load value information.
Others
Most L.V.
piston tools.
PSLV4
*Shank diameter is .150". NOTE: T = Thread Length, S = Shank Length.
See pages 210, 211 and 214
for load value information.
⁄8" – 16 Threaded Studs* (Factory Mutual Listing-see below)
3
⁄8 - 16 Knurled (T-1 1⁄4, S-3⁄4)
3
⁄8 - 16 (T-1 1⁄4, S-1)
3
⁄8 - 16 (T-1 1⁄4, S-1 1⁄4)
3
PSLV3-12575K
PSLV3-125100
PSLV3-125125**
Pack
Qty.
Carton
Qty.
100
100
100
1,000
1,000
1,000
Compatible Tools
Simpson Strong-Tie
PT-27HD
Others
Most other 3⁄8"
Barrel tools.
*Shank diameter is .205". NOTE: T = Thread Length, S = Shank Length.
**Factory Mutual Listing 3031724
PSLV3
Metric Fasteners
See pages 209, 210 and 214
for load value information.
8MM Headed Fasteners with 3.68MM Shank Diameter
Length
(in.)
Model
Pack
Qty.
Carton
Qty.
⁄2 Knurled
5
⁄8 Knurled
3
⁄4 Knurled
7
⁄8
1
1 1⁄4
1 1⁄2
1 5⁄8
1 7⁄8
2
2 1⁄4
2 1⁄2
2 7⁄8
PHN-14K
PHN-16K
PHN-19K
PHN-22
PHN-27
PHN-32
PHN-37
PHN-42
PHN-47
PHN-52
PHN-57
PHN-62
PHN-72
100
100
100
100
100
100
100
100
100
100
100
100
100
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1
*Up to 21⁄2",
**Up to 1 1⁄2"
204
Model
Compatible Tools
Simpson Strong-Tie
PTP-27L*
PTP-27S**
PT-27
PT-22P
PT-22
PT-22GS
PT-22H
Others
DX-350,
DX-36,
DX-400E,
DX-A40,
DX-460,
DX-A41,
System 1,
DX-351 and
8mm tools.
PHN
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
Gas and Powder-Actuated Fastening Systems
Length
(in.)
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
Fasteners
For Simpson Strong-Tie® Powder-Actuated Tools
Metric Fasteners (Cont’d)
See pages 209 and 214
for load value information.
8MM Headed Fasteners with 3.68MM Shank Diameter and 1" Metal Washers
Length
(in.)
Model
Pack
Qty.
Carton
Qty.
1
1 1⁄4
1 1⁄2
1 5⁄8
1 7⁄8
2
2 1⁄4
2 1⁄2
2 7⁄8
PHNW-27
PHNW-32
PHNW-37
PHNW-42
PHNW-47
PHNW-52
PHNW-57
PHNW-62
PHNW-72
100
100
100
100
100
100
100
100
100
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Compatible Tools
Simpson Strong-Tie
Others
DX-350,
DX-36,
DX-400E,
DX-A40,
DX-A41,
DX-460,
System1,
DX-351 and
8mm tools.
PTP-27L
PTP-27S*
PT-27
PT-22P
PT-22
PT-22GS
PT-22H
PHNW
*Up to 2"
6MM Headed Fasteners with 3.68MM Shank Diameter and 12MM Washers
Length
(in.)
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
1
1 1⁄4
1 1⁄2
1 5⁄8
2
2 1⁄2
2 7⁄8
PHK-22
PHK-27
PHK-32
PHK-37
PHK-42
PHK-52
PHK-62
PHK-72
Pack
Qty.
Carton
Qty.
100
100
100
100
100
100
100
100
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Compatible
Tools
DX-100L,
DX-300,
DX-400B,
DX-450,
DX-460,
DX-451 and
12mm tools
PHK
See pages 212–214 for
load value information.
8MM Headed Tophat Fasteners with 3.68MM Shank Diameter
Length
(in.)
⁄8 Knurled
3
⁄4 Knurled
5
⁄8
7
1
Model
Pack
Qty.
Carton
Qty.
PHNT-16K
PHNT-19K
PHNT-22
PHNT-27
100
100
100
100
1,000
1,000
1,000
1,000
Compatible Tools
Simpson Strong-Tie
Others
PTP-27L, PTP-27S
PT-27, PT-22P, PT-22
PT-22GS, PT-22H
DX-35, DX-351,
and most
8mm tools
Gas and Powder-Actuated Fastening Systems
⁄8
7
Model
PHNT
205
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
Fasteners
For Simpson Strong-Tie® Powder-Actuated Tools
Metric Fasteners (Cont’d)
Collated Fasteners - 8mm Headed with 3.68 MM Shank Diameter
Length
(in.)
Model
⁄2 Knurled PHSNA-14K
⁄8 Knurled PHSNA-16K
3
PHSNA-19
⁄4
3
⁄4 Knurled PHSNA-19K
7
PHSNA-22
⁄8
1
PHSNA-27
1 1⁄4
PHSNA-32
1 1⁄2
PHSNA-37
1 5⁄8
PHSNA-42
1 7⁄8
PHSNA-47
2
PHSNA-52
PHSNA-57
2 1⁄4
2 1⁄2
PHSNA-62
2 7⁄8
PHSNA-72
1
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Compatible Tools
Simpson Strong-Tie
See pages 209 and 214 for
load value information.
Others
DX-A40 with
magazine,
DX-A41 with
magazine,
DX-351,
DX-460 with
magazine
PTP-27SMAGR
(through 32mm)
PTP-27LMAGR
(through 72mm)
PHSNA
See pages 210 and 212 for
load value information.
Threaded Rod Hangers - 8mm Headed with 3.68 MM Shank Diameter
Length
(in.)
Model
Pack
Qty.
Carton
Qty.
1 1⁄4, 1⁄4 - 20
Threaded Rod Hanger
PTRH4-HN32
50
500
1 ⁄4, ⁄8 - 16
Threaded Rod Hanger
PTRH3-HN32
50
500
1
3
Compatible Tools
Simpson Strong-Tie
PTP-27L, PTP-27S
PT-27, PT-22P PT-22
PT-22GS, PT-22H
Others
DX-351, DX-350,
DX-36, DX-35,
DX-A40
PTRH3
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
Gas and Powder-Actuated Fastening Systems
5
Pack Carton
Qty.
Qty.
Concrete Forming Pin - .187" Headed with .145" Shank Diameter
Length
(in.)
Model
⁄16 x 2 1⁄2
Concrete
Forming Pin
PKP-250
Pack Carton
Qty.
Qty.
3
100
1,000
Compatible Tools
Simpson Strong-Tie
PTP-27L, PT-27
PT-22, PT-22GS
PT-22H
Others
DX-Series
and
8mm tools
PKP
NOTE: Lengths in inches are for reference only and may not be exact.
206
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
Fasteners
For Simpson Strong-Tie® Powder-Actuated Tools
Miscellaneous
Manual Hammer
Tool (not for use with
powder loads)
⁄4" Headed Hammer Drive Fastener with 3⁄8" Metal Washer
1
Length
(in.)
⁄2
3
⁄4
1
1
1 1⁄4
1 1⁄2
2
2 1⁄2
3
Model
Pack
Qty.
Carton
Qty.
PHD-50
PHD-75
PHD-100
PHD-125
PHD-150
PHD-200
PHD-250
PHD-300
100
100
100
100
100
100
100
100
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Compatible Tools
Simpson Strong-Tie
Others
PHT-38
HT-38, R-260,
R-375, XL-143,
and other hammer
drive tools
PHT-38
Warning: Do not use powder
PHD
loads with this tool. This is a
hammer drive tool only. Use
of powder loads with this tool
may result in injury or death.
Powder-Actuated Tool Repair and Maintenance Kits
Kit Model No.
Description
PT-27
PT-27PK1
Normal wear part
replacement kit
All
PT-MK1
Tool cleaning kit
All
PT-MTL2.0
Tool lubricant
Contents
5 Shear Clips (Part No. PT-301011)
1 Annular Spring (Part No. PT-301014)
1 Piston Stop (Part No. PT-301012)
3 Ball Bearings (Part No. PT-301013)
1 Piston (Part No. PT-301903)
2 Piston Rings (Part No. PT-301208)
1 Nosepiece (Part No. PT-301010)
1 Cleaning Brush - Wire (Part No. BRUSH 125)
1 Cleaning Brush 3⁄4" Diameter (Part No. BRUSH 25)
1 Cleaning Brush 1⁄4" Diameter (Part No. BRUSH 75)
1 PAT Tool Lubricant - 4 oz. spray bottle (Part No. PT-MTL4.0)
(1) 1⁄8" Hex Wrench (Part No. MW-18)
(1) 3⁄16" Hex Wrench (Part No. MW-316)
(1) 5mm Hex Wrench (Part No. MW-5)
4 oz. spray bottle
Gas and Powder-Actuated Fastening Systems
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
Tool
207
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
Tension & Shear Load Values
For Simpson Strong-Tie® Fasteners
Code Reports: Reference ICC-ES ESR-2138, Florida FL 11506.3 and City of L.A. RR25469 for code-listed fasteners and applications
* * See page 13 for an explanation
PDPA Tension and Shear Loads in Steel
of the load table icons
Shank Minimum Minimum Minimum
Edge
Minimum
Model Diameter Penetration
Distance Spacing
Steel
No.
in.
in.
in.
in.
Strength3
(mm)
(mm)
(mm)
(mm)
PDPA
0.157
(4.0)
THRU 1
0.5
(13)
1.0
(25)
THRU 1
0.5
(13)
1.0
(25)
Allowable Tension Loads – lbs. (kN)
Allowable Shear Loads – lbs. (kN)
Steel Thickness (in.)
Steel Thickness (in.)
⁄16
3
⁄4
⁄8
1
⁄2
3
1
⁄4
⁄16
3
⁄4
3
1
⁄8
3
⁄2
1
⁄4
3
260
(1.16)
370
(1.65)
380 7
(1.69) 7
530 7
(2.36) 7
195 4
(0.87) 4
410
(1.82)
365
(1.62)
385 7
(1.71) 7
385 7
(1.71) 7
325 4
(1.45) 4
ASTM A572,
305
Grade 50 or
(1.36)
ASTM A992
335
(1.49)
355 7
(1.58) 7
485 5
(2.16) 5
170 6
(0.76) 6
420
(1.87)
365
(1.62)
290 7
(1.29) 7
275 5
(1.22) 5
275 6
(1.22) 6
ASTM A36
1. The entire pointed portion of the fastener must penetrate through the steel to obtain
the tabulated values, unless otherwise indicated in footnote 4, 5, 6 or 7.
2. The allowable tension and shear values are for the fastener only. Members connected to
the steel must be investigated separately in accordance with accepted design criteria.
3. Steel strength must comply with the minimum requirements of ASTM A 36
(Fy = 36 ksi, Fu = 58 ksi) or ASTM A 572, Grade 50 (Fy = 50 ksi, Fu = 65 ksi),
or ASTM A992 (Fy = 50 ksi, Fu = 65 ksi)
4.
5.
6.
7.
Based upon minimum penetration depth of 0.46" (11.7 mm).
Based upon minimum penetration depth of 0.58" (14.7 mm).
Based upon minimum penetration depth of 0.36" (9.1 mm).
The fastener must be driven to where the point of the fastener penetrates through the steel.
* * See page 13 for an explanation
PDPA Tension and Shear Loads in Normal-Weight Concrete
Model No.
PDPA
Shank
Diameter
in.
(mm)
0.157
(4.0)
of the load table icons
Allowable Tension Load
lbs. (kN)
Allowable Shear Load
lbs. (kN)
Minimum
Minimum
Minimum
Edge
Spacing
Penetration
Distance
f'c ≥ 4,000 psi f'c ≥ 6,000 psi f'c ≥ 4,000 psi f'c ≥ 6,000 psi
in.
in.
in.
(27.6 MPa) (41.3 MPa) (27.6 MPa) (41.3 MPa)
(mm)
(mm)
(mm)
Concrete
Concrete
Concrete
Concrete
3
⁄4
(19)
1
(25)
1 1⁄4
(32)
3.5
(89)
3.5
(89)
3.5
(89)
5
(127)
5
(127)
5
(127)
1. The fastener shall not be driven until the concrete has
reached the designated compressive strength. Minimum
concrete thickness is three times the fastener embedment
into the concrete.
30
(0.13)
310
(1.38)
380
(1.69)
70
(0.31)
160
(0.71)
365
(1.62)
135
(0.60)
310
(1.38)
420
(1.87)
130
(0.58)
350
(1.56)
390
(1.73)
2. The allowable tension and shear values are for the fastener
only. Members connected to the steel must be investigated
separately in accordance with accepted design criteria.
** See page 13 for an explanation
PDPA Tension and Shear Loads in Lightweight Concrete over Metal Deck
Model No.
Shank
Diameter
in.
(mm)
Minimum
Penetration
in.
(mm)
Installed In Concrete
0.157
(4.0)
⁄4
(19)
1
(25)
1 1⁄4
(32)
85
(0.38)
150
(0.67)
320
(1.42)
3
PDPA
Allowable Tension Load - lbs. (kN)
f'c ≥ 3,000 psi (20.7 MPa) Concrete
1. The fastener shall not be driven until the concrete has
reached the designated compressive strength. Minimum
concrete thickness is three times the fastener embedment
into the concrete.
2. The allowable tension and shear values are for the fastener
only. Members connected to the steel must be investigated
separately in accordance with accepted design criteria.
208
Installed Thru.
Metal Deck
105
(0.47)
145
(0.64)
170
(0.76)
of the load table icons
Allowable Shear Load – lbs. (kN)
Installed In Concrete
Installed Thru.
Metal Deck
f'c ≥ 3,000 psi (20.7 MPa) Concrete
105
(0.47)
225
(1.00)
420
(1.87)
280
(1.25)
280
(1.25)
320
(1.42)
3. Metal deck must be minimum 20 gauge and has a minimum
yield strength of 38,000 psi.
4. Shear values are for loads applied toward edge of flute.
5. The fastener shall be installed 1 1⁄2" from the edge of flute.
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
Gas and Powder-Actuated Fastening Systems
PDPA
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
Tension & Shear Load Values
For Simpson Strong-Tie® Fasteners
*
PDP Series Fasteners - Tension and Shear Loads in Normal-Weight Concrete
Allowable Tension Load 2 - lbs. (kN)
Allowable Shear Load 2 - lbs. (kN)
Shank
Minimum
Minimum
Minimum
Diameter Penetration Edge Distance Spacing f'c ≥ 2000 psi f'c ≥ 3000 psi f'c ≥ 4000 psi f'c ≥ 2000 psi f'c ≥ 3000 psi f'c ≥ 4000 psi
inches
inches
inches
inches
(13.8 MPa)
(20.7 MPa)
(27.6 MPa)
(13.8 MPa)
(20.7 MPa)
(27.6 MPa)
(mm)
(mm)
(mm)
(mm)
Concrete
Concrete
Concrete
Concrete
Concrete
Concrete
0.145
1
3
4
45
100
150
120
165
205
(3.7)
(25)
(75)
(100)
(0.2)
(0.44)
(0.67)
(0.53)
(0.73)
(0.91)
PDP
3
4
140
255
370
265
265
265
0.145
1 1⁄4
(32)
(75)
(100)
(0.62)
(1.13)
(1.65)
(1.18)
(1.18)
(1.18)
(3.7)
0.145
1
3
4
60
195
PDP-SS
t
t
t
t
(3.7)
(25)
(75)
(100)
(0.27)
(0.87)
Model
No.
1. The fasteners shall not be driven until the concrete has reached the designated compressive strength.
Minimum concrete thickness is three times the fastener embedment into the concrete.
2. The allowable tension and shear values are for the fastener only. Wood or steel members connected
must be investigated in accordance with accepted design criteria.
The table applies to the following
Simpson Strong-Tie fasteners where
minimum penetration exists:
For more information
on these fasteners go to
pages 201 and 202.
PDP & PDP-SS
PDPW
PDP*
PDPW*
PDPWL*
PDP-125
PDP-150
PDP-175
PDP-200
PDP-225
PDP-250
PDP-300
PDPW-125
PDPW-150
PDPW-175
PDPW-200
PDPW-225
PDPW-250
PDPW-300
PDPWL-125
PDPWL-150
PDPWL-175
PDPWL-200
PDPWL-225
PDPWL-250
PDPWL-300
PDPWL-400
PDPWL & PDPWL-SS
*See page 13 for
an explanation
of the load
table icons
*Including stainless
steel models.
Allowable Tension Load 2 - lbs. (kN)
Allowable Shear Load 2 - lbs. (kN)
Shank
Minimum
Minimum
Minimum
Diameter Penetration Edge Distance Spacing f'c ≥ 2000 psi f'c ≥ 3000 psi f'c ≥ 4000 psi f'c ≥ 2000 psi f'c ≥ 3000 psi f'c ≥ 4000 psi
inches
inches
inches
inches
(13.8 MPa)
(20.7 MPa)
(27.6 MPa)
(13.8 MPa)
(20.7 MPa)
(27.6 MPa)
(mm)
(mm)
(mm)
(mm)
Concrete
Concrete
Concrete
Concrete
Concrete
Concrete
0.145
1
3
4
45
100
150
120
165
205
(3.7)
(25)
(75)
(100)
(0.2)
(0.44)
(0.67)
(0.53)
(0.73)
(0.91)
PHN
3
4
140
255
370
265
265
265
0.145
1 1⁄4
(32)
(75)
(100)
(0.62)
(1.13)
(1.65)
(1.18)
(1.18)
(1.18)
(3.7)
The table applies to the following
1. The fasteners shall not be driven until the concrete has reached the designated compressive strength.
Simpson Strong-Tie® fasteners where
Minimum concrete thickness is three times the fastener embedment into the concrete.
2. The allowable tension and shear values are for the fastener only. Wood or steel members connected
minimum penetration exists:
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
Model
No.
must be investigated in accordance with accepted design criteria.
For more
information on
these fasteners
go to pages
204, 205 and 206.
PHN
PHNW
PHSNA
Spacing of PDP and PHN Fasteners for Attachment of
Wood Sill Plates to Normal-Weight Concrete
Model
No.
PDPW-300
PDPWL-300
PDPWL-300MG
PDPWLS-300MG
PHN-72
or
PHNW-72
Overall Head
Shank
Length Diameter Diameter
inches inches
inches
(mm)
(mm)
(mm)
⁄16
5
3
(76)
(7.9)
2 7⁄8
(73)
(7.9)
⁄16
5
*
Maximum Spacing
inches
(mm)
Interior
Exterior
Interior
Shear Walls 3 Nonshear Walls 2 Shear Walls 3
0.145
(3.7)
12
(305)
24
(610)
12
(305)
0.145
(3.7)
18
(457)
36
(914)
18
(457)
PHN
PHNW
PHSNA
PHN-27
PHN-32
PHN-37
PHN-42
PHN-47
PHN-52
PHN-57
PHN-62
PHN-72
PHNW-27
PHNW-32
PHNW-37
PHNW-42
PHNW-47
PHNW-52
PHNW-57
PHNW-62
PHNW-72
PHSNA-27
PHSNA-32
PHSNA-37
PHSNA-42
PHSNA-47
PHSNA-52
PHSNA-57
PHSNA-62
PHSNA-72
1. Spacings are based upon the attachment of 2-inch (nominal thickness)
wood sill plates, with specific gravity of 0.50 or greater, to concrete
floor slabs or footings. For species of wood with specific gravity of 0.42
to 0.49, multiply required spacing of fasteners for shear walls by 0.81.
For species of wood with specific gravity of 0.31 to 0.41, multiply the
required spacing of fasteners for shear walls by 0.65.
2. All walls shall have fasteners placed at 6 inches from ends of sill plates,
with maximum spacing as shown in the table.
3. Fasteners indicated shall have two pins placed 6 inches and 10 inches,
respectively, from each end of sill plates, with maximum spacing as
shown in the table.
4. All fasteners must be installed with a minimum 3⁄4-inch-diameter, No. 16
gauge (0.0598 inch) steel washer.
5. Fasteners shall not be driven until the concrete has reached a
compressive strength of 2,000 psi. Minimum edge distance is 1 3⁄4 inches.
6. The fasteners shall not be used for the attachment of shear walls having
a unit shear in excess of 100 pounds per foot. Spacings shown are
independent of the number of building stories.
Gas and Powder-Actuated Fastening Systems
*
PHN Series Fasteners - Tension and Shear Loads in Normal-Weight Concrete
209
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
Tension & Shear Load Values
For Simpson Strong-Tie® Fasteners
PDPH Series Fasteners - Tension and Shear Loads
in Normal Weight Concrete
*
Allowable Tension Load - lbs. (kN)
Allowable Shear Load - lbs. (kN)
Minimum
Shank
Minimum
Minimum
Diameter Penetration Edge Distance Spacing f'c ≥ 2000 psi f'c ≥ 4000 psi f'c ≥ 6000 psi f'c ≥ 2000 psi f'c ≥ 4000 psi f'c ≥ 6000 psi
inches
inches
inches
inches
(13.8 MPa)
(27.6 MPa)
(41.4 MPa)
(27.6 MPa)
(41.4 MPa)
(13.8 MPa)
(mm)
(mm)
(mm)
(mm)
Concrete
Concrete
Concrete
Concrete
Concrete
Concrete
3
3 1⁄2
5 1⁄8
30
30
110
50
110
190
⁄4
(89)
(130)
(0.13)
(0.13)
(0.29)
(0.22)
(0.49)
(0.84)
(19)
0.177
(4.5)
1 1⁄4
3 1⁄2
5 1⁄8
130
260
190
265
220
105
(32)
(89)
(130)
(0.58)
(1.15)
(0.84)
(1.18)
(0.98)
(0.47)
PDPH
1. The fasteners shall not be driven until the concrete has reached the designated compressive strength.
Minimum concrete thickness is three times the fastener embedment into the concrete.
2. The allowable tension values are for the fastener only. Connected members must be
investigated separately in accordance with accepted design criteria.
PDP and PHN Fasteners Attaching Light Gauge Steel
Channels - Shear Loads in Normal Weight Concrete
Model
No.
Gas and Powder-Actuated Fastening Systems
PDP
PHN
PDP
PHN
Model
No.
Shank
Diameter
inches
(mm)
Minimum
Penetration
inches
(mm)
PSLV3
0.205
(5.2)
1 ⁄4
(32)
1
f'c ≥ 2500 psi (17.2 MPa)
Concrete
260
(1.16)
Allowable Tension Load
lbs. (kN)
Model
No.
Shank
Diameter
inches
(mm)
Minimum
Penetration
inches
(mm)
f'c ≥ 2500 psi (17.2 MPa)
Concrete
PTRH3-HN32
0.145
(3.7)
1
(25)
150
(0.67)
PTRH4-HN32
0.145
(3.7)
1
(25)
150
(0.67)
PCLDP Series Ceiling Clips - Tension Loads
in Normal Weight Concrete
210
Shank
Diameter
inches
(mm)
Minimum
Penetration
inches
(mm)
PCLDP-125
0.145
(3.7)
1 1⁄8
(29)
PDP
Allowable Tension Load
lbs. (kN)
f'c ≥ 2000 psi (13.8 MPa)
Concrete
25
(0.11)
For more information
on these fasteners
go to page 201.
PHN
For more information
on these fasteners go
to pages 201 and 204.
*
For more
information on
these fasteners
go to page 204.
Allowable Tension Load
lbs. (kN)
PTRH Series Rod Hangers - Tension Loads
in Normal Weight Concrete
Model
No.
explanation of the
load table icons
*
Allowable Shear Load
Light Gauge
Shank
Minimum
lbs. (kN)
Diameter Penetration Steel Channel
inches
Thickness
inches
f'c ≥ 2000 psi (13.8 MPa) 1. The fasteners shall
not be driven until
(mm)
gauge
(mm)
Concrete
the concrete has
7
0.145
160
⁄8
reached the
20
(3.7)
(0.71)
(22)
designated
7
160
0.145
⁄8
compressive
20
(0.71)
(3.7)
(22)
strength. Minimum
7
concrete thickness
135
0.145
⁄8
18
is three times the
(0.60)
(3.7)
(22)
faster embedment
7
135
0.145
⁄8
18
into the concrete.
(0.60)
(3.7)
(22)
PSLV Series Threaded Studs - Tension Loads
in Normal Weight Concrete
PDPH
*See page 13 for an
See notes below.
PSLV3
*
1. The fasteners shall not be driven
until the concrete has reached the
designated compressive strength.
Minimum concrete thickness is
three times the fastener
embedment into the concrete.
2. The allowable tension values are
for the fastener only. Connected
members must be investigated
separately in accordance with
accepted design criteria.
PTRH3
For more information on
these fasteners
go to page 206.
*
1. The fasteners shall not be
driven until the concrete has
reached the designated
compressive strength.
Minimum concrete thickness
is three times the faster
embedment into the concrete.
For more
information
on these
fasteners go
to page 203.
PCLDP
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
Model
No.
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
Tension & Shear Load Values
For Simpson Strong-Tie® Fasteners
PDPT Series Fasteners - Tension Loads
in Lightweight Concrete over Metal Deck
*
Shank
Minimum Allowable Tension Load, lbs. (kN) Allowable Tension Load, lbs. (kN)
(Installed in Concrete)
(Installed through Metal Deck)
Model Diameter Penetration
No.
inches
inches
f'c ≥ 3000 psi (20.7 MPa)
f'c ≥ 3000 psi (20.7 MPa)
(mm)
(mm)
Concrete
Concrete
7
90
40
0.145
⁄
8
PDPT
(0.40)
(0.18)
(3.7)
(22)
See notes 1–5 below.
PDPT Series Fasteners - Shear Loads
in Lightweight Concrete over Metal Deck
Shank
Minimum
Model Diameter Penetration
No.
inches
inches
(mm)
(mm)
PDPT
0.145
(3.7)
*
Allowable Shear Load, lbs. (kN)
(Installed in Concrete)
Allowable Shear Load, lbs. (kN)
(Installed through Metal Deck)
f'c ≥ 3000 psi (20.7 MPa)
Concrete
250
(1.11)
f'c ≥ 3000 psi (20.7 MPa)
Concrete
280
(1.24)
⁄8
7
(22)
1. The fasteners shall not be driven until the concrete has reached the designated compressive strength.
Minimum concrete thickness is three times the fastener embedment into the concrete.
2. The allowable tension and shear values are for the fastener only. Connected members must be
investigated separately in accordance with accepted design criteria.
3. Metal deck must be minimum 20 gauge.
4. Shear values are for loads applied toward edge of flute.
5. The fasteners shall be installed 1 1⁄2 inch from the edge of flute.
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
Model
No.
Shank
Diameter
inches
(mm)
Minimum
Penetration
inches
(mm)
PSLV4
0.150
(3.8)
1
(25)
*
*See page 13 for
Allowable Tension Load, lbs. (kN)
(Installed through Metal Deck)
an explanation
of the load
table icons
f'c ≥ 3000 psi (20.7 MPa)
Concrete
80
(0.36)
1. The fasteners shall not be driven until the concrete has reached the designated
compressive strength. Minimum concrete thickness is three times the fastener
embedment into the concrete.
2. The allowable tension values are for the fastener only. Connected members must
be investigated separately in accordance with accepted design criteria.
3. Metal deck must be minimum 20 gauge.
4. The fasteners shall be installed 1 1⁄2 inch from the edge of flute.
Tension Loads for 3⁄8 - 16 Threaded Studs in
Lightweight Concrete over Metal Deck
Model
No.
Shank
Diameter
inches
(mm)
Minimum
Penetration
inches
(mm)
PSLV3
0.205
(5.21)
1 1⁄4
(32)
For more information on
these fasteners
go to page 203.
PSLV4
For more information
on these fasteners
go to page 204.
Gas and Powder-Actuated Fastening Systems
Tension Loads for 1⁄4" - 20 Threaded Studs in
Lightweight Concrete Over a Metal Deck
PDPT
*
Allowable Tension Load, lbs. (kN)
(Installed through Metal Deck)
f'c ≥ 3000 psi (20.7 MPa)
Concrete
225
(1.00)
1. The fasteners shall not be driven until the concrete has reached the designated
compressive strength. Minimum concrete thickness is three times the fastener
embedment into the concrete.
2. The allowable tension values are for the fastener only. Connected members
must be investigated separately in accordance with accepted design criteria.
3. Metal deck must be minimum 20 gauge.
4. The fasteners shall be installed 1 1⁄2 inch from the edge of flute.
PSLV3
For more information on
these fasteners
go to page 204.
211
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
For Simpson Strong-Tie® Fasteners
PCL & PECL Series Ceiling Clips - Tension and Oblique Loads
in Sand-Lightweight Concrete over Metal Deck
Model
No.
PCLDP-100
PECLDP-125
PCLDP-125
PECLHN-27
PCLHN-27
*
Shank Minimum Allowable Tension Load, lbs. (kN) Allowable Oblique Load, lbs. (kN)
(Installed through Metal Deck)
Diameter Penetration (Installed through Metal Deck)
inches
inches
f'c ≥ 3000 psi (20.7 MPa)
f'c ≥ 3000 psi (20.7 MPa)
(mm)
(mm)
Concrete
Concrete
7
55
85
0.145
⁄8
(0.24)
(0.38)
(3.7)
(22)
0.145
1
55
85
(3.7)
(25)
(0.24)
(0.38)
0.145
1
55
85
(3.7)
(25)
(0.24)
(0.38)
0.145
1
55
85
(3.7)
(25)
(0.24)
(0.38)
0.145
1
55
85
(3.7)
(25)
(0.24)
(0.38)
Gas and Powder-Actuated Fastening Systems
1. The fasteners shall not be driven until the concrete has reached the designated compressive strength.
Minimum concrete thickness is three times the fastener embedment into the concrete.
2. The allowable tension and shear values are for the fastener only. Connected members must be
investigated separately in accordance with accepted design criteria.
3. Metal deck must be minimum 20 gauge.
4. Oblique values are for loads applied toward edge of flute.
5. The fasteners shall be installed 1 1⁄2 inch from the edge of flute.
PTRH Series Threaded Rod Hangers - Tension Loads
in Sand-Lightweight Concrete over Metal Deck
PCLDP
PECLDP
For more information on these
fasteners go to page 203.
*
Shank
Minimum Allowable Tension Load, lbs. (kN)
Model
Diameter Penetration (Installed through Metal Deck)
No.
inches
inches
f'c ≥ 3000 psi (20.7 MPa)
(mm)
(mm)
Concrete
0.145
1
140
PTRH3-HN32
(3.7)
(25)
(0.62)
0.145
1
140
PTRH4-HN32
(3.7)
(25)
(0.62)
*See page 13 for
an explanation
of the load
table icons
PTRH3
1. The fasteners shall not be driven until the concrete has reached the designated
compressive strength. Minimum concrete thickness is three times the fastener
embedment into the concrete.
2. The allowable tension values are for the fastener only. Connected members
must be investigated separately in accordance with accepted design criteria.
3. Metal deck must be minimum 20 gauge.
4. The fasteners shall be installed 1 1⁄2 inch from the edge of flute.
For more information
on these fasteners
go to page 206.
PHNT Series Fasteners - Tension Loads in Sand-Lightweight
Concrete Over Metal Deck
*
Shank
Minimum Allowable Tension Load, lbs. (kN) Allowable Tension Load, lbs. (kN)
(Installed in Concrete)
(Installed through Metal Deck)
Model Diameter Penetration
No.
inches
inches
f'c ≥ 3000 psi (20.7 MPa)
f'c ≥ 3000 psi (20.7 MPa)
(mm)
(mm)
Concrete
Concrete
7
185
165
0.145
⁄
8
PHNT
(0.82)
(0.73)
(3.7)
(22)
See notes 1–5 below.
*
PHNT Series Fasteners - Shear Loads in Sand-Lightweight
Concrete Over Metal Deck
Shank
Minimum
Model Diameter Penetration
No.
inches
inches
(mm)
(mm)
PHNT
212
0.145
(3.7)
⁄8
7
(22)
Allowable Shear Load, lbs. (kN)
(Installed in Concrete)
Allowable Shear Load, lbs. (kN)
(Installed through Metal Deck)
PHNT
f'c ≥ 3000 psi (20.7 MPa)
Concrete
275
(1.22)
f'c ≥ 3000 psi (20.7 MPa)
Concrete
400
(1.78)
For more information
on these fasteners
go to page 205.
1. The fasteners shall not be driven until the concrete has reached the designated
compressive strength. Minimum concrete thickness is three times the fastener
embedment into the concrete.
2. The allowable tension and shear values are for the fastener only. Connected members
must be investigated separately in accordance with accepted design criteria.
3. Metal deck must be minimum 20 gauge.
4. Shear values are for loads applied toward edge of flute.
5. The fasteners shall be installed 1 1⁄2 inch from the edge of flute.
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
Tension & Shear Load Values
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
Tension & Shear Load Values
For Simpson Strong-Tie® Fasteners
*
PDP Tension and Shear Loads in Hollow CMU
8-inch Hollow CMU Loads
Shank
Minimum
Minimum
Minimum
Minimum
Based on CMU Strength
Model Diameter Penetration Edge Distance End Distance Spacing
No.
inches
inches
inches
inches
inches Tension Load Shear Load
Allowable
Allowable
(mm)
(mm)
(mm)
(mm)
(mm)
lbs. (kN)
lbs. (kN)
4
4 5⁄8
4
110
200
0.145
1 3⁄4
PDP
(44)
(100)
(116)
(100)
(0.50)
(0.90)
(3.7)
1. Values for 8-inch wide CMU Grade N, Type II, lightweight,
medium-weight and normal weight concrete masonry units
conforming to UBC Standard 21-4 or ASTM C90.
2. The embedment depth is measured from the outside face of
the concrete masonry unit and is based on the anchor being
embedded an additional 1⁄2 inch through 1 1⁄4" thick face shell.
3. Allowable loads may not be increased for short-term
loading due to wind or seismic forces. CMU wall
design must satisfy applicable design standards
and be capable of withstanding applied loads.
PDP Series Fasteners Tension and Shear Loads in Steel
For more
information
on these
fasteners go
to page 201.
PDP
*
Shank
Minimum
Minimum
Steel
Allowable
Allowable
Model Diameter Edge Distance Spacing Thickness 3 Tension Load 2 Shear Load 2
No.
inches
inches
inches
inches
lbs.
lbs.
(mm)
(mm)
(mm)
(mm)
(kN)
(kN)
PDP
PDP
Knurled
0.145
(3.7)
0.145
(3.7)
⁄2
1
(12.7)
⁄2
1
(12.7)
1
(25)
1
(25)
⁄16
3
(4.8)
⁄4
1
(6.4)
155
(0.69)
210
(0.93)
395
(1.76)
–
*
PDP
PDPH
PDPWL
PDPW
See page 13 for
Shank
Minimum
Minimum
Steel
Allowable
Allowable *an explanation
3
2
2
Model Diameter Edge Distance Spacing Thickness Tension Load Shear Load
of the load
No.
inches
inches
inches
inches
lbs.
lbs.
table icons
(mm)
(mm)
(mm)
(mm)
(kN)
(kN)
⁄16
3
PDPH
⁄2
1
0.177
(4.5)
(13)
1
(25)
(5)
⁄4
1
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
(6)
1. The entire pointed portion of the fastener
must penetrate through the steel to obtain
the tabulated values. See Detail A.
2. The allowable tension and shear values are for
the fastener to steel only. Connected members
must be investigated separately in accordance
with accepted design criteria.
3. Steel must conform to ASTM A36 specifications,
with Fy = 36,000 psi, minimum.
GAS ACTUATED
FASTENER
STEEL
THICKNESS
Detail A
ENTIRE POINTED PORTION
OF THE FASTENER MUST
PENETRATE THROUGH
THE STEEL
335
(1.49)
520
(2.31)
790
(3.51)
870
(3.87)
The table applies to the following Simpson Strong-Tie
fasteners where minimum penetration exists:
PDP
PDPW
PDPWL
PDP-50K
PDP-62K
PDP-100
PDP-125
PDP-150
PDP-175
PDP-200
PDP-225
PDP-250
PDP-300
–
–
PDPW-100
PDPW-125
PDPW-150
PDPW-175
PDPW-200
–
PDPW-250
PDPW-300
–
–
PDPWL-100
PDPWL-125
PDPWL-150
PDPWL-175
PDPWL-200
–
PDPWL-250
PDPWL-300
Gas and Powder-Actuated Fastening Systems
PDPH Series Fasteners Tension and Shear Loads in Steel
See
notes
below.
For more information on these
fasteners go to page 202.
*
PDPT Series Fasteners - Tension and Shear Loads in Steel
Shank
Minimum
Minimum
Steel
Allowable
Allowable
Model Diameter Edge Distance Spacing Thickness 3 Tension Load 2 Shear Load 2
No.
inches
inches
inches
inches
lbs.
lbs.
(mm)
(mm)
(mm)
(mm)
(kN)
(kN)
⁄8
1
(3)
PDPT
0.145
(3.7)
⁄2
1
(13)
1
(25)
⁄16
3
(5)
⁄4
1
(6)
150
(0.67)
290
(1.29)
340
(1.51)
530
(2.36)
660
(2.93)
700
(3.11)
1. The entire pointed portion of the fastener must penetrate through the steel to obtain the tabulated value. See Detail A.
2. The allowable tension and shear values are for the fastener to steel only. Connected member
must be investigated separately in accordance with accepted design criteria.
3. Steel must conform to ASTM A36 specifications, with Fy = 36,000 psi, minimum.
PDPT
For more information on these
fasteners go to page 203.
213
Simpson Strong-Tie ® Anchoring and Fastening Systems for Concrete and Masonry
Tension & Shear Load Values
For Simpson Strong-Tie® Fasteners
PHN Series Fasteners Tension and Shear Loads in Steel
*
Shank
Minimum
Minimum
Steel
Allowable
Allowable
Model Diameter Edge Distance Spacing Thickness 3 Tension Load 2 Shear Load 2
No.
inches
inches
inches
inches
lbs.
lbs.
(mm)
(mm)
(mm)
(mm)
(kN)
(kN)
PHN
PHN 4
Knurled
⁄2
1
0.145
(3.7)
0.145
(3.7)
(12.7)
⁄2
1
(12.7)
1
(25)
1
(25)
1. The entire pointed portion of the fastener
must penetrate through the steel to obtain the
tabulated values. See Detail A.
2. The allowable tension and shear values are for
the fastener into steel only. Wood members
connected must be investigated separately in
accordance with accepted design criteria.
3. Steel must conform to ASTM A 36 specifications,
with Fy = 36,000 psi, minimum.
4. PHN-16K or longer.
GAS ACTUATED
FASTENER
Detail A
ENTIRE POINTED PORTION
OF THE FASTENER MUST
PENETRATE THROUGH
THE STEEL
⁄4
1
(6.4)
155
(0.69)
440
(2.0)
395
(1.76)
–
PHN
The table applies to the following
Simpson Strong-Tie fasteners where
minimum penetration exists:
PHN
PHNW
PHSNA
PHN-16K
PHN-19K
PHN-27
PHN-32
PHN-37
PHN-42
PHN-47
PHN-52
PHN-57
PHN-62
PHN-72
–
–
PHNW-27
PHNW-32
PHNW-37
PHNW-42
PHNW-47
PHNW-52
PHNW-57
PHNW-62
PHNW-72
PHSNA-16K
PHSNA-19K
PHSNA-27
PHSNA-32
PHSNA-37
PHSNA-42
PHSNA-47
PHSNA-52
PHSNA-57
PHSNA-62
PHSNA-72
PHNW
PHSNA
For more information on
these fasteners go to pages
204, 205 and 206.
*
PHNT Series Fasteners - Tension and Shear Loads in Steel
Shank
Minimum
Minimum
Steel
Allowable
Allowable
Model Diameter Edge Distance Spacing Thickness 3 Tension Load 2 Shear Load 2
No.
inches
inches
inches
inches
lbs.
lbs.
(mm)
(mm)
(mm)
(mm)
(kN)
(kN)
⁄8
1
(3)
PHNT
0.145
(3.7)
⁄2
1
(13)
1
(25)
⁄16
3
(5)
⁄4
1
(6)
40
(0.18)
50
(0.22)
250
(1.11)
1. The entire pointed portion of the fastener must penetrate through
the steel to obtain the tabulated value. See Detail A.
2. The allowable tension and shear values are for the fastener to steel only.
3. Steel must conform to ASTM A36 specifications, with Fy = 36,000 psi, minimum.
440
(1.96)
620
(2.76)
620
(2.76)
PHNT
For more information
on these fasteners
go to page 205.
*See page 13 for
an explanation
of the load
table icons
*
PSLV Series Threaded Studs - Tension and Shear Loads in Steel
Shank
Minimum
Minimum
Steel
Allowable
Allowable
Model Diameter Edge Distance Spacing Thickness 3 Tension Load 2 Shear Load 2
No.
inches
inches
inches
inches
lbs.
lbs.
(mm)
(mm)
(mm)
(mm)
(kN)
(kN)
⁄16
3
PSLV3
0.205
(5.2)
1
(25)
1 5⁄8
(41)
(5)
⁄4
1
(6)
⁄16
3
PSLV4
0.150
(3.8)
⁄2
1
(13)
1
(25)
(5)
⁄4
1
(6)
214
270
(1.20)
680
(3.02)
200
(0.89)
420
(1.87)
1. The entire pointed portion of the fastener must penetrate through
the steel to obtain the tabulated value. See Detail A.
2. The allowable tension and shear values are for the fastener to steel only. Connected
member must be investigated separately in accordance with accepted design criteria.
3. Steel must conform to ASTM A36 specifications, with Fy = 36,000 psi, minimum.
770
(3.42)
1,120
(4.98)
630
(2.80)
690
(3.07)
PSLV3
PSLV4
For more information on
these fasteners
go to page 204.
C-SAS-2012 © 2012 Simpson Strong-Tie Company Inc.
Gas and Powder-Actuated Fastening Systems
STEEL
THICKNESS
⁄16
3
(4.8)