BUYERS
BUY/1384
Hydraulic Pumps & Accessories
CHAR-LYNN® H SERIES HYDRAULIC MOTOR
These motors are economical, efficient, small, compact, and
powerful, designed for medium duty applications. These motors
have the industry proven spool valve design combined with
state-of-the-art gerotors. In addition, a wide variety of mounting
flanges with a 1” diameter straight shaft, woodruff keyway,
and 1⁄2” NPT port provides design flexibility. Direction of shaft
rotation and shaft speed can be controlled easily and smoothly
throughout the speed range of the
motor, and equipment can be driven
direct eliminating costly mechanical
components.
Part No. HM034P.
Specifications
Automotive & Heavy-Duty Fleet Products
Displ. cm3/r (in3/r)
Max. Speed (RPM) @ Continuous Flow
Flow LPM (GPM) Continuous
Flow LPM (GPM) Intermittent
Torque LPM (lb-in) Continuous
Torque LPM (lb-in) Intermittent
Min. Starting Torque Nm (lb-in) @ Cont. Pressure
Min. Starting Torque Nm (lb-in) @ Int. Pressure
Pressure – Bar (PSI) Continuous
Pressure – Bar (PSI) Intermittent
97 (5.9)
585
57 (15)
68 (18)
155 (1,368)
207 (1,829)
124 (1,100)
171 (1,510)
124 (1,800)
165 (2,400)
ELECTRIC 4-WAY FUNCTION DC POWER UNIT
•Pump/motor/reservoir •Externally adjustable system relief
valve •Check valve •Cartridge valves are located inside the
reservoir •C-1 port is positively checked (2,500 PSI) •C-2
port 800 PSI •1/4” NPT outlet ports •Factory wired control
station and cable •Triple filtration: suction, high pressure return
and valve •Horizontal mounting •5-1/2” x 6-1/2” x 19” steel
reservoir •1.87 gallon usable (432 in3)
Part No. PU642LRS.
SINGLE SPOOL DIRECTIONAL CONTROL
VALVES
Rated to 2,500 PSI working pressure, maximum shock and
surge pressure 4,000 PSI; rated flow capacity 30 GPM. 3
mounting holes for 3/8” bolts.
Part No.
HV13AG00D0
HV13AG2ED0
HV11AG00D0
HV11AG2ED0
VH1
TWO POSITION PRESS SHIFT SELECTOR
VALVE
Press Shift can be shifted under full line pressure. Press Shift
selector valves are designed with a hydraulically balanced
spool that allows them to be shifted under full line pressure.
System pressure is bled off to a low pressure leg before
reaching the seal, resulting in a reduced effort required to
shift the spool. The seal is therefore operated in an unloaded
condition. 1” NPTF, 306 GPM.
Part No. HSV100.
Power
Beyond Port Size & Type
All – 1-1/16 #12
3-way spring centre None
SAE
All – 1-1/16 #12
3-way spring centre Yes
SAE
All – 1-1/16 #12
4-way spring centre None
SAE
All – 1-1/16 #12
4-way spring centre Yes
SAE
Handle and Linkage Assembly (Sold Separately)
Spool Action
AIR SHIFT CYLINDER FOR HYDRAULIC PUMP
WITH MANUAL VALVE
Converts manual pump operation to pneumatically controlled
pump. Comes complete with pump activator cylinder and
mounting hardware.
Part No. AS301.
P.T.O./PUMP VALVE
Controlled lowering (feathering); automatic
disengagement of the P.T.O. in “Lower”.
K90
Part No.
K90
K90C
K90D
K90C
Description
Valve only
Single oval cabinet console for #K90 valve
Valve with spring return raise (dead man control)
Reservoir is Steel
37 GALLON RESERVOIR
12 gauge H.R.P.O. steel with welded mounting angles. 1/4
turn chrome filter breather with wire basket strainer; site level
gauge; interior baffle between suction and discharge •2” NPT
suction port and 1-1/4” NPT return •Magnetic drain plug with
sump •Black
Part No. SMR37S.
SIDE-MOUNT POLYETHYLENE RESERVOIR
Designed for applications where behind the cab mounting
space is unavailable, making the SMR50P ideal for dump truck
and garbage truck applications. •50 gallon capacity •Heavyduty construction (0.375” minimum thickness) •No rust, dents,
peeling, slag or oxidation •Easily adapts to 2 or 3 lines for
most dump trailer applications. Complete system includes:
•Maintenance-free textured poly
reservoir •Fluid sight level/
thermometer gauge •Raised
anti-slosh fill neck with 1/4 turn
40 Micron chromed filler cap •All
mounting hardware and straps
Part No. SMR50P.
HYDRAULIC RESERVOIRS WITH INTEGRAL BRACKETS
7 Gallon Reservoirs Features: •10 and 12 gauge steel construction •3/4” screen in breather cap •3/4” magnetic drain
plug •1-1/4” suction ports •1” return ports •Factory powder coated •Multiple mounting positions
15, 25 Gallon & 30 Gallon Reservoirs Features: •13 gauge H.R.P.O. steel •Welded mounting angles •1/4 turn
chrome filler breather w/ basket strainer •Oil level gauge with temperature indicator •Interior baffle between suction and
discharge •Large 2” NPT suction ports •Magnetic drain plug •Factory powder coated •Fully tested
30 gallon reservoir Additional Features: •Top drain port •Port to accommodate breather monitor kit (in cab warning
light) •Port to accommodate fluid level gauge (light indicator in cab)
Usable
Part No. Reservoir Gallons
SMR7S
7 gallon
7
SMR15S 15 gallon
11
SMR25S 25 gallon
18
SMR30S 30 gallon
30
Q30
UPRIGHT POLYMER RESERVOIR
Extra-large capacity reservoir (50-55 gallon usable),
constructed from rugged reinforced polyethylene. Features:
•Dual 2” NPT field serviceable port •Heavy-duty strapless hold
down system •Powder coated steel mounting saddle •Screw
in diffuser (2” to 1-1/4”) •Sight temperature gauge •Heavy-duty
chain mounted 40 micron
filler breather cap
Part No. UR50P.
UPRIGHT STEEL RESERVOIR
Sturdy 12 gauge steel construction is fully baffled and includes
a 1/4 turn filler breather unit and domed vent.
Usable
Part No. Reservoir Gallons
UR50S
50 gallon
50
UR70S
70 gallon 67.5
Optional Equipment
frame
UR50FB Upright
bracket kit
tank
UR50MK Upright
spring kit
Gregg Distributors Ltd. - Truly Canadian!