Flat and square products from Saarstahl
Saarstahl has been producing to the highest of standards for many years with
regards to top quality wire rod, steel bar and semi-finished products. Our range of
tailor-made flat and square products is also greatly appreciated by our customers
all over the world. Use our sound knowledge to secure your competitive advantage.
Range of dimensions for flat bar
Width
in mm (inch)
16.0 – 21.9
(5⁄8“ -
55⁄ 64“)
22.0 – 28.9
29.0 – 30.9
31.0 – 49.9
50.0 – 75.0
75.1 – 88.0
89.1 – 110.0
110.1 – 135.0
(55⁄64“ - 19⁄64“) (19⁄64“ - 17⁄32“) (17⁄32“ - 131⁄32“) (131⁄32“ - 261⁄64“) (261⁄64“ - 315⁄32“) (31⁄2“ - 421⁄64“) (421⁄64“ - 55⁄16“)
8.0 – 9.99 (5⁄16“ - 25⁄64“)
10.0 – 26.0 (25⁄64“ - 11⁄32“)
Thickness
26.1 – 29.0 (11⁄32“ - 19⁄64“)
29.1 – 39.0 (19⁄64“ - 117⁄32“)
39.1 – 43.0 (117⁄32“ - 111⁄16“)
43.1 – 54.0 (111⁄16“ - 21⁄8“)
54.1 – 65.0 (21⁄8“ - 29⁄16“)
65.1 – 70.0 (29⁄16“ - 23⁄4“)
Issue 2015/11/01
Wire rod and steel bar
Steel Bar
Further dimensions upon request
Range of dimensions for square bar
Dimensions in mm (inch)
14.00 – 37.00 (35⁄64“ - 129⁄64“)
37.00 – 72.00 (129⁄64“ - 253⁄64“)
Product
Wire rod and steel bar
Steel bar
Issue 2015/11/01
Profile shapes and tolerances
Squares
According to DIN EN 10059: 2003 / ASTM A6 1
Square edge flats
According to DIN EN 10058: 2003 / ASTM A6 1
t
a
Hot rolled flat bar
b
a
T ighter tolerances and further profile shapes
(e.g. rounded edges) upon request
1
Flat profiles
According to DIN EN 10092-1: 2003 1
Profile A: Hot rolled flat bar with half-rounded edges
b
t
r=30
t
r ≈ t/2
Profile B: Hot rolled flat bar with semi-rounded edges
b
Specifications for hot rolled bars:
Profile C: Hot rolled flat bar with straight ends and
rounded corners
t
r
Cut lengths: 4.00 m to 13.00 m (13 ft. to 42 ft.),
shorter/longer lengths available upon request
Permitted length tolerance for cold-sheared steel bars:
Permitted length tolerance of about 100 mm (4”), tighter
tolerance available upon request
Permitted straightness tolerance for bars: Straightness
of bars of 4 mm/m (¼” in any 5 ft.), extra straight options
are available upon request
b
9⁄ 16
5⁄ 16
Thicknesses of up to 40 mm (1 ”) with radius of 8 mm (~ ”),
thicknesses over 40 mm (1 9⁄16”) with radius of 12 mm (~ 15⁄32”)
Bar end finish: Sheared ends per standard, cold sawn
upon request
Bundled: Stacked upon request
Our flats and squares are available
in the following steel grades:
ASTM A29:
BS 970:
Rephosphorized and resulfurized carbon steels
Non-alloy free cutting steels
1215 / 12L14
230M07 / 230M07Pb
Resulfurized carbon steels
Carbon manganese free cutting steels
1117 / 11L17 / 1137 / 11L37 / 1144
(further grades upon request)
Carbon / carbon manganese steels 2
Nonsulfurized carbon grades
Alloy steels 2
10xx (leaded, boron or micro-alloyed grades upon request)
Grades mainly acc. to EN standards; e.g. 10025 / 10083 / 10084 /
10087 / …; grades acc. to BS with no equivalent in EN standards
are available upon request
2
Alloy steels
e.g. 4140 / 41L40 / 8620 / 86L20 (further grades upon request)
Saarstahl AG
Sales
Saarstahl AG
Head of Sales
Bismarckstraße 57 – 59
66333 Völklingen
GERMANY
Mr. Jean-Paul Timmerman
Tel.: +49 68 98 10 - 47 47
Fax: +49 68 98 10 - 5 47 47
[email protected]
Tel.: +49 68 98 10 - 0
Fax: +49 68 98 10 - 40 01
[email protected]
www.saarstahl.com
Sales Manager Business Unit
Free cutting steel
Mr. Dominique Michaeli
Tel.: +49 68 98 10 - 47 30
Fax: +49 68 98 10 - 5 47 30
[email protected]