Gas Care Services
Industrial Gas Meter Housings
A complete range of housings for industrial and commercial gas meters
KIOSK
CODE
PRESSURE
L= Low
M= Medium/
Intermediate
HOUSING
mm
AVG
WEIGHT
(KGS)
TYPE OF
INSTALLATION
METER
GC2
Wall-Mounted
U16
GC2FS
Freestanding
U16
GC2MP
Wall-Mounted
U16MP
M
750
360
850
WM or FS
U16
L&M
730
425
850
Wall-Mounted
U25
L
900
360
850
19.8
GC2 MULTI
GC3
Length
Depth
Height
L
650
400
650
L&M
730
425
830
VENTILATION
CREEP
RELIEF
EXPLOSION
RELIEF
m2
FAV
(%)
14.1
0.020
8.56
No
extra
8.2
0.027
8.60
Yes
extra
16.6
0.022
8.41
No
extra
19.5
0.027
9.0
Yes
extra
0.026
8.53
No
extra
GC4
Freestanding
U16, U25
L&M
1000
540
960
24.4
0.046
8.42
Yes
extra
GC4
Freestanding
U40
L
1000
540
960
24.4
0.046
8.42
Yes
extra
GC4 PLUS
Freestanding
U40
M
1200
750
1200
43.4
0.071
8.43
Yes
extra
GC5
Freestanding
U65
L&M
1475
750
1350
56.4
0.083
8.17
Yes
extra
L
1600
850
1450
62.5
0.200
7.86
Yes
N/A
L
1600
850
1450
62.5
0.200
8.7
Yes
standard
M
1600
850
1450
62.5
0.200
47.26
Yes
N/A
L
1600
850
1595
74.5
0.200
7.86
Yes
N/A
L
1600
850
1595
74.5
0.200
8.7
Yes
standard
M
1600
850
1595
74.5
0.200
47.26
Yes
N/A
L
1600
850
1750
81.5
0.200
7.86
Yes
N/A
L
1600
850
1750
81.5
0.200
8.7
Yes
standard
M
1600
850
1750
81.5
0.200
47.26
Yes
N/A
L&M
2400
1220
1800
156.0
0.200
16.09
Yes
standard
GC6LP
Freestanding
GC6EXPL
Freestanding
GC6MP
Freestanding
GC7LP
Freestanding
GC7EXPL
Freestanding
GC7MP
Freestanding
GC7+LP
Freestanding
GC7+EXPL
Freestanding
GC7+MP
Freestanding
GC8MP
Freestanding
U65, U100, Compact
Rigs & Modules
U65, U100, Compact
Rigs & Modules
U65, U100, Compact
Rigs & Modules
U65, U100, Compact
Rigs & Modules
U65, U100, Compact
Rigs & Modules
U65, U100, Compact
Rigs & Modules
U65, U100, Compact
Rigs & Modules
U65, U100, Compact
Rigs & Modules
U65, U100, Compact
Rigs & Modules
Compact Rigs &
Modules
USED AND
APPROVED BY:
National Grid
Metering
SGN Connections
Fulcrum
Connections
CM Utilities
Core Utilities
Dresser
Elseter Jeavons
Manx Gas
Morland Utilities
GTC
GBH Utilities
Meters UK
UK Patents
2333028
and
2338562
GC is a
registered
trademark
SPECIFICATION:
Ventilation & Explosion Relief as directed by: T/SP/PRS/35 - National Grid Gas, IGE/GM/6, IGE/GM/7A & 7B, IGE/GM/8 - Institute of Gas Engineers.
tic.
Standard colour of British Racing Green, other colours available.
FOR LARGER GAS RIGS:
GC Walk-In and Walk-Through Gas Kiosks are available in both standard and
non standard sizes. Suitable for low, medium and intermediate pressure
applications, these Kiosks are manufactured to comply with industry standard
GISPRS35:2011.
GC2
GC2MP
GC4 plus
GC5
GC2FS
GC6
GC3
GC7/7+
GC4
GC8
MCL Industrial Enclosures Ltd
Units 3 & 4 Monarch Works, Elswick Road, Fenton
Industrial Estate, Fenton, Stoke-on-Trent, ST4 2SH
Tel: 01782 375450 Fax: 01782 522652
E-mail enquires:
GC6 Industrial Gas Meter Housing
Suitable for a U65 meter - LP version for low pressure, MP version for medium pressure
Suitable for a U100 meter - LP version for low pressure, MP version for medium pressure
Suitable for compact rigs and modules - LP version for low pressure, MP version for medium pressure from the mains supply
TM
The Gas Care Services GC range of products incorporates ventilation and explosion relief requirements as
directed by: IGE/GM/6, IGE/GM//7A & 7B, IGE/GM/8 - Institute of Gas Engineers
SPECIFICATION
resin conforming to BS476 Part 7 Class 2
Manufactured utilising gel coat and resin,
GC6
Width: 1600mm
Depth: 850mm
Height: 1450mm
Creep relief as standard
Standard colour - British Racing Green
14C39
Ventilation to GM76
OPTIONAL EXTRAS
Alternative external colour
Explosion relief
Weight: 62.5kgs avg
Ventilation
FAV (%)
GC6LP:
8.7
GC6MP:
35.0
GC6EXPL: 8.7
Installation service
Refer to the drawing on the reverse of this data sheet. The service should be installed in accordance with these dimensions allowing for the
concrete base, if it has not already been cast. NB, make absolutely sure the service has been installed in the correct position, otherwise the
Preparation of site
We strongly advise that, for lasting durability, appearance and safety (should previously excavated soil sink), that a concrete base is
provided. The concrete base can be cast before or after the service and/or outlet are already installed, the corresponding cut-out in the
concrete base need not be provided. Where the meter position is against the outside wall of the property, determine where the outlet is
to be run. If straight through the wall or facework along the wall, then the outlet cut-out in the concrete base will not be necessary.
Installation free standing
1. Check position of service (on left) and outlet if already installed (on right).
2. Unpack housing, unlock and carefully stand aside door. Release both draw bolts, found each side of inside front, pull front slightly
4. Install meter in accordance with the meter manufacturer’s instructions.
rovided.
Installation wall adjacent
1. Check position of service (on left) and how outlet is to be run - through the back, side or underground.
2. Unpack housing, unlock and carefully
asideKT0009
door. Release
both draw bolts,
found
each side of inside front, pull front slightly
ITEMstand
REF:
PRODUCT
CODE:
IS0036
ck plate.
maintained.
4. If outlet is to enter building through the rear of the housng, determine position and, if appropriate, core drill through the wall, standard
Nimbus or equivalent core drill size (up to 50mm sleeve 107mm, up to 100mm sleeve 178mm).
5. Ensure you have approprate sleeve kit. Using a saw to cut clearance hole through the back of the housing to line up with that through
tion with
self-tapping screws provicded.
between
APPLICATIONS
housing and outside wall of property.
7. Install meter in accordance with the meter manufacturer’s instructions.
8. Seal annular space between outlet pipework and sleeve with non-setting mastic.
MCL Industrial Enclosures Ltd
Units 3 & 4 Monarch Works, Elswick Road, Fenton
Industrial Estate, Fenton, Stoke-on-Trent, ST4 2SH
Tel: 01782 375450 Fax: 01782 522652
E-mail enquires: [email protected]
GC6 Industrial Gas Meter Housing
Details of concrete base to be laid
MCL Industrial Enclosures Ltd
Units 3 & 4 Monarch Works, Elswick Road, Fenton
Industrial Estate, Fenton, Stoke-on-Trent, ST4 2SH
Tel: 01782375450 Fax: 01782 522652
E-mailenquires: [email protected]