Designer Series
Blanket Warming Cabinet
• Energy-efficient WarmSafe™ heating
system monitors interior surface
temperatures and balances heat
throughout the cabinet
(Patent No: US 8,217,316; US 8,581,152)
DC250
DC150
(shown with optional timer)
• Silent operation (no fans or
moving parts)
• Lint traps not required
DC350
• Stationary or mobile option
• Epoxy-coated exterior &
interior surfaces
• Programmable control
• Interior lighting with a comforting
blue glow. Two (2) intensity settings
• Five capacities available:
»» 3-4 blankets (1.5ft3)
»» 4-6 blankets (2.5ft3)
»» 10-12 blankets (3.5ft3)
»» 14-18 blankets (4.0ft3)
DC750
(shown with optional timer)
»» 20-25 blankets (7.5ft3)
DC400
(shown with optional timer)
www.enthermics.com
Designer Series Blanket Warming Cabinet
•
•
•
•
•
•
•
•
Additional features:
control:
specifications:
Single-chamber warming cabinet.
White epoxy-coated steel exterior
casing and interior insert.
Single pane, energy-efficient,
e-coated glass window in door
allows for inventory observation.
Easy push-button door for
hands-free operation.
Door is fully gasketed and hinged
on the right side of the unit.
WarmSafe™ incorporates a multiple
zone warming technology (Patent No:
US 8,217,316; US 8,581,152) that heats
where and when it is needed. All
chamber surface temperatures are
monitored, providing an efficient balance
of heat, low-energy consumption and
minimal heat loss.
•
•
•
•
•
•
•
•
•
DC350 & DC750 include a heated
center shelf to further optimize heat
distribution throughout the cavity.
Four (4) non-skid rubber feet
are standard.
Adjustable temperature range of
32° - 71°C (90° - 160°F)
Operates in Celsius or Fahrenheit.
Four digit L.E.D. display.
•
•
On/off button.
Up and down adjustment buttons.
•
Actual temperature button.
Interior light button.
Built-in speaker for audible feedback.
Integrated control lockout feature.
•
•
clearance requirements:
L.E.D. interior lighting casts a comforting
blue glow with two (2) different intensity
settings and off mode.
Safety: In the event of a power failure
the cabinet will retain its programming
and operates as previously set when
power is restored.
Safety: A warming shut-off system,
separate from the electronic control,
prevents overheating.
Convenience: Access point and
removable cover has been added to
the back panel that allows the addition
of data logging or temperature
management hardware.
Convenience: Stackable configurations
are available for additional capacity or to
pair with fluid warmers.
3" (76mm) from rear
1" (25mm) from top and sides
3/4" (19mm) from bottom
Options & Accessories – specify at time of order
Door Assembly:
Caster Assemblies:
Bumper & Caster Assembly,
3" (76mm); overall height increases by 5" (127mm)
DC250 or DC350
White epoxy coated – 5017546
Stainless Steel – 5017548
DC400 or DC750
White epoxy coated – 5017547
Stainless Steel – 5017549
Plate & Caster Assembly,
3" (76mm) casters (2 rigid, 2 swivel with brake);
overall height increases by 5” (127mm)
DC250 or DC350
White epoxy coated – 5017542
Stainless Steel – 5017544
DC400 or DC750
White epoxy coated – 5017543
Stainless Steel – 5017545
Caster Assembly
DC250 or DC350 – 5012693
3" (76mm) casters (4 swivel; 2 with brake);
overall height increases by 4.3" (109mm)
DC750 – 5018646
5" (127mm) casters (4 swivel; 2 with brake);
overall height increases by 6.5" (165mm)
Cart, 34-1/2" (876mm) H x 24" (610mm) W x 26" (660mm) D
DC150, DC250, DC400 – 5018614
Blue epoxy coated without manual door lock (standard)
Blue epoxy coated with manual door lock (optional)
Stainless Steel without manual door lock (optional)
Stainless Steel with manual door lock (optional)
Seismic Mounting Brackets
(special installation requirements apply)
1014403 overall width increases 2" (48mm)
Stacking Kits (it is recommended that fluid warming units be placed
at or near the bottom of the stacked configuration whenever possible
for maximum stability.)
DC250 or DC350 double stacked
White epoxy coated – 5013021
Stainless Steel – 5017272
DC400 or DC750 double stacked
White epoxy coated – 5013024
Stainless Steel – 5017273
DC250 or DC350 triple stacked
White epoxy coated – 5017537
Stainless Steel – 5017539
Stainless Steel Exterior
Available with original order only.
Timer Control Optional timer allows the
user to program the warmer to automatically
turn on and off at a selected time.
Available with original order only.
Timer Control
Cart shown
with DC150
printed in u.s.a.
s pec ific a tio ns a re subj e c t t o c h a n g e w i t h o ut n o t i c e
ES3100 (08/15)
Designer Series Blanket Warming Cabinet
DC150
9.2" (235mm)
IEC Cord Inlet
Dimensions (HxWxD)
39.1" (994mm)
Cord length: 6 ft (1.83m) (est.)
With feet (standard):
17.0" x 18.5" x 22.7" (431mm x 470mm x 577mm)
With casters (optional):
20.5" x 18.5" x 22.7" (521mm x 470mm x 577mm)
Capacity
1.5 ft3
Weight** (est.)
NET
18.0" (456mm)
Electrical
56 lbs (25 kg)
SHIP, CRATED
120 V.A.C. — 60 Hz, 1 ph
0.6 kW, 5.0 Amps
Safety Class I Equipment
No Applied Parts
Mode of Operation: Continuous
36.0" (914mm)
22.7" (577mm)
19.8" (504mm)
18.5" (470mm)
118 lbs (54 kg)
NEMA 5-15P
15A - 125V Plug
Hospital Grade
IPX-0
220 V.A.C. — 50 Hz, 1 ph
0.6 kW, 2.7 Amps
CEE 7/7*
220-230V Plug
230 V.A.C. — 50 Hz, 1 ph
0.6 kW, 2.6 Amps
BS 1363 Plug*
(UK only)
IPX-0
14.5" (368mm)
CAVITY
15.5" (394mm)
CAVITY
13.5" (344mm)
IEC Cord Inlet
9.6" (245mm)
INSERT
14.4" (366mm)
INSERT
10.1" (258mm)
CAVITY
16.2" (412mm)
17.0" (431mm)
Type B Equipment
Type B Equipment
CEE 7/7*
220-230V Plug
18.8" (477mm)
17.7" (450mm)
IPX-0
*Other international plugs are available. Contact factory for more information.
**Domestic ground shipping information. Contact factory for export weight and dimensions.
DC250
Dimensions (HxWxD)
9.3" (235mm)
IEC Cord Inlet
18.0" (457mm)
42.2" (1071mm)
CORD LENGTH: 6 ft (1.83m) (est.)
With feet (standard):
21.9" x 18.5" x 25.7" (557mm x 470mm x 653mm)
With plate and
casters (optional):
With bumper and
casters (optional):
26.2" x 18.5" x 25.7" (666mm x 470mm x 653mm)
With casters (optional):
25.5" x 18.5" x 25.7" (647mm x 470mm x 653mm)
Capacity
2.5 ft3
Weight** (est.)
NET
Electrical
36.0" (914mm)
15.5" (394mm)
CAVITY
18.6" (472mm)
CAVITY
22.1" (561mm)
18.5" (470mm)
IEC Cord Inlet
CAVITY
INSERT
15.1" (385mm)
INSERT
22.8" (580mm)
14.6" (372mm)
21.2" (538mm)
21.9" (557mm)
14.5" (369mm)
67 lbs (30 kg)
120 V.A.C. — 60 Hz, 1 ph
0.6 kW, 5.0 Amps
SHIP, CRATED
Safety Class I Equipment
No Applied Parts
Mode of Operation: Continuous
25.7" (653mm)
18.5" (470mm)
26.3" x 21.3" x 25.9" (667mm x 540mm x 657mm)
135 lbs (62 kg)
NEMA 5-15P
15A - 125V Plug
Hospital Grade
IPX-0
220 V.A.C. — 50 Hz, 1 ph
0.6 kW, 2.7 Amps
CEE 7/7*
220-230V Plug
230 V.A.C. — 50 Hz, 1 ph
0.6 kW, 2.6 Amps
BS 1363 Plug*
(UK only)
IPX-0
Type B Equipment
Type B Equipment
CEE 7/7*
220-230V Plug
IPX-0
*Other international plugs are available. Contact factory for more information.
**Domestic ground shipping information. Contact factory for export weight and dimensions.
*Other international plugs are available. Contact factory for more information.
**Domestic ground shipping information. Contact factory for export weight and dimensions.
DC350
9.3" (235mm)
IEC Cord Inlet
Dimensions (HxWxD)
18.0" (457mm)
42.3" (1073mm)
Cord length: 6 ft (1.83m) (est.)
With feet (standard):
27.9" x 18.5" x 25.7" (709mm x 470mm x 653mm)
With plate and
casters (optional):
With bumper and
casters (optional):
32.2" x 18.5" x 25.7" (819mm x 470mm x 653mm)
With casters (optional):
31.5" x 18.5" x 25.7" (799mm x 470mm x 653mm)
Capacity
3.5 ft3
Weight** (est.)
NET
Electrical
36.0" (914mm)
18.5" (470mm)
CAVITY
15.5" (394mm)
120 V.A.C. — 60 Hz, 1 ph
0.8 kW, 6.7 Amps
SHIP, CRATED
143 lbs (65 kg)
NEMA 5-15P
15A - 125V Plug
Hospital Grade
IPX-0
220 V.A.C. — 50 Hz, 1 ph
0.8 kW, 3.6 Amps
CEE 7/7*
220-230V Plug
230 V.A.C. — 50 Hz, 1 ph
0.8 kW, 3.5 Amps
BS 1363 Plug*
(UK only)
Type B Equipment
24.5" (621mm)
IEC Cord Inlet
CAVITY
9.6" (244mm)
INSERT
21.1" (537mm)
INSERT
9.6" (244mm)
INSERT
27.2" (691mm)
27.9" (709mm)
14.5" (369mm)
91 lbs (41 kg)
Safety Class I Equipment
No Applied Parts
Mode of Operation: Continuous
25.7" (653mm)
22.8" (580mm)
18.5" (470mm)
32.2" x 21.3" x 25.9" (819mm x 540mm x 657mm)
Type B Equipment
22.2" (564mm)
CEE 7/7*
220-230V Plug
CAVITY
IPX-0
IPX-0
*Other international plugs are available. Contact factory for more information.
**Domestic ground shipping information. Contact factory for export weight and dimensions.
DC400
Dimensions (HxWxD)
12" (305mm)
IEC Cord Inlet
23.5" (597mm)
50.0" (1270mm)
Cord length: 6 ft (1.83m) (est.)
21.0" (533mm)
CAVITY
21" (533mm)
CAVITY
24.3" (618mm)
18.5" (470mm)
IEC Cord Inlet
14.6" (372mm)
INSERT
25.1" (638mm)
15.1" (384mm)
CAVITY
21.1" (537mm)
21.9" (557mm)
INSERT
26.1" x 24" x 28" (664mm x 610mm x 712mm)
With casters (optional):
25.5" x 24" x 28" (647mm x 610mm x 712mm)
26.2" x 26.8" x 28.9" (665mm x 679mm x 734mm)
Capacity
4.0 ft3
Weight** (est.)
NET
85-1/2 lbs (39 kg)
120 V.A.C. — 60 Hz, 1 ph
0.8 kW, 6.7 Amps
Safety Class I Equipment
No Applied Parts
Mode of Operation: Continuous
28.0" (712mm)
20" (507mm)
21.9" x 24" x 28" (557mm x 610mm x 712mm)
With plate and
casters (optional):
With bumper and
casters (optional):
Electrical
47.0" (1194mm)
24.0" (610mm)
With feet (standard):
SHIP, CRATED
165 lbs (75 kg)
NEMA 5-15P
15A - 125V Plug
Hospital Grade
IPX-0
220 V.A.C. — 50 Hz, 1 ph
0.8 kW, 3.6 Amps
CEE 7/7*
220-230V Plug
230 V.A.C. — 50 Hz, 1 ph
0.8 kW, 3.5 Amps
BS 1363 Plug*
(UK only)
Type B Equipment
Type B Equipment
CEE 7/7*
220-230V Plug
IPX-0
IPX-0
*Other international plugs are available. Contact factory for more information.
**Domestic ground shipping information. Contact factory for export weight and dimensions.
*Other international plugs are available. Contact factory for more information.
**Domestic ground shipping information. Contact factory for export weight and dimensions.
printed in u.s.a.
s pec ific a tio ns a r e subj e c t t o c h a n g e w i t h o ut n o t i c e
ES3100 (08/15)
DC750
Dimensions (HxWxD)
12.0" (305mm)
IEC Cord Inlet
35.4" x 24.0" x 28.0" (900mm x 610mm x 710mm)
With plate and
casters (optional):
With bumper and
casters (optional):
39.3" x 24.0" x 28.0" (997mm x 610mm x 710mm)
INSERT
21.0" (533mm)
CAVITY
CAVITY
31.8" (807mm)
IEC Cord Inlet
21.0" (533mm)
28.1" (715mm)
19.9" (506mm)
13.2" (336mm)
INSERT
34.3" (871mm)
13.1" (333mm)
INSERT
25.1" (637mm)
CAVITY
40.7" x 24.0" x 28.0" (1033mm x 610mm x 710mm)
7.5 ft3
Weight** (est.)
NET
134 lbs (61 kg)
120 V.A.C. — 60 Hz, 1 ph
0.8 kW, 6.7 Amps
Safety Class I Equipment
No Applied Parts
Mode of Operation: Continuous
28.0" (710mm)
24.0" (610mm)
39.3" x 26.8" x 28.0" (997mm x 679mm x 710mm)
Capacity
Electrical
47.0" (1194mm)
35.4" (900mm)
With feet (standard):
With casters (optional):
23.5" (597mm)
50.0" (1270mm)
Cord length: 6 ft (1.83m) (est.)
SHIP, CRATED
219 lbs (99 kg)
NEMA 5-15P
15A - 125V Plug
Hospital Grade
IPX-0
220 V.A.C. — 50 Hz, 1 ph
0.8 kW, 3.6 Amps
CEE 7/7*
220-230V Plug
230 V.A.C. — 50 Hz, 1 ph
0.8 kW, 3.5 Amps
BS 1363 Plug*
(UK only)
Type B Equipment
Type B Equipment
CEE 7/7*
220-230V Plug
24.2" (614mm)
IPX-0
IPX-0
*Other international plugs are available. Contact factory for more information.
**Domestic ground shipping information. Contact factory for export weight and dimensions.
ENTHERMICS MEDICAL SYSTEMS
An ISO 13485:2003 certified company
PO Box 443, Menomonee Falls WI 53052-0443
W164 N9221 Water St, Menomonee Falls WI 53051
Tel 262-251-8356 | 800-TO-B-WARM
[email protected]
www.enthermics.com
PRINTED IN U.S.A.
specifications are subJect to change without notice
MADE IN THE U.S.A.
ES3100 (08/15)