iDNSC 675
Specifications
Imaging, density, neutron, standoff, caliper service
5½ FH
box
Neutron
measure
point
Neutron
source
19.83 ft
[6.05 m]
2.81 ft
[0.86 m]
Two caliper
measure
points
14.97 ft
[4.56 m]
Density source
Density
measure
points
13.97 ft
[4.26 m]
10.72 ft
[3.27 m]
10.33 ft
[3.15 m]
Directional
measure
points
5½ FH
9.62 ft
[2.93 m]
6.01 ft
[1.83 m]
Tool Specifications
Nominal OD, in [mm]
Max. OD, in [mm]
ID, in [mm]
Length, ft [m]
Weight, lbm [kg]
Equivalent stiffness, in [mm]
Average moment of inertia, in4 [cm4]
Tool Joint Specifications
API 51/2 FH (field)
Makeup torque, ft.lbf [N.m]
Bending strength ratio
API 51/2 FH (shop)
Makeup torque, ft.lbf [N.m]
Bending strength ratio
Operating Specifications
Max. dogleg rotating, °/100 ft
Max. dogleg sliding, °/100 ft
Max. compression, lbm [kg]
Max. tension, lbf [N]
Max. torque, ft.lbf [N.m]
Max. rpm
Max. temperature, degF [degC]
Transportation Basket
Length, ft [m]
Width, ft [m]
Height, ft [m]
Weight, lbm [kg]
Gross Weight
Tool and basket, lbm [kg]
61⁄4 [171.5]
81⁄4 [209.6]
4.90 [124.5], 4.63 [117.6], 3.85 [97.8], 3.75 [95.3]
19.8 [6.04]
1,050 [476]
6.68 [1169.7] OD/ 2.81 [71.4] ID
94.64 [3,939.2]
28,500 [36,641]
1.93
28,500 [36,641]
1.93
10
16
50,000 [22,676]
350,000 [1,556,878]
28,000 [37,963]
250
302 [150], 350 [175]†
30.5 [9.3]
2.8 [0.9]
2.5 [0.8]
2,150 [975]
5,400 [2,449]
Note:
All dimensions are nominal. Configuration options are available. Tool drawing is not to scale.
†
Standard tool configuration 32 to 302 degF [0 to 150 degC], optional SURVIVOR HPHT rating 32 to 350 degF [0 to 175 degC].
Extension
sub
5.80 ft
[1.77 m]
5½ FH
XO Sub
2.16 ft
[0.66 m]
5½ FH
pin
slb.com/iDNSC
iDNSC and SURVIVOR are marks of Schlumberger.
Copyright © 2013 Schlumberger. All rights reserved. 13-PF-0024