General
Specifications
Coplanar™ Adapter:
AK-901 for
Differential Pressure Manifolds
GS 22B01C55-01EN-A
INTRODUCTION
The PGI AK-901 Coplanar™ adapter is
designed for use with an existing Integral
manifold. The AK-901 provides the end
user the capability to mount a traditional
2-1/8" center to center Yokogawa
transmitter without replacing the existing
manifold. This adapter allows for easy
retrofitting of transmitters in the field.
Existing mounting brackets and impulse
piping can be used as well as wiring and
power supply.
FEATURES
•
Coplanar™ Retrofit
The AK-901 adapter is designed
specifically to fit into existing
Coplanar™ installations that use
integrally mounted manifolds.
•
Material and Temperature
Adapters are available in 316
Stainless Steel with Teflon® Flange
Seals for temperatures to 500° F or
with high temperature Grafoil® Flange
Seals for temperatures up to 1,000° F
when used with an existing 316
Stainless Steel, Grafoil® Packed
Integral Manifold.
ISO 9001:2008 Certified Quality System
Yokogawa Corporation of America
2 Dart Road Newnan, Georgia U.S.A. 30265
Tel: 1-800-258-2552 Fax: 1-770-254-0928
GS 22B01C55-01EN-A
© Copyright August 2010
2nd Edition
2
COPLANAR™ ADAPTER: AK-901 FOR DIFFERENTIAL PRESSURE MANIFOLDS
Dimensions, inches [mm]
Notes
1.
Approximate weight: 0.5 lb [0.22 kg].
2.
Meets the requirements of NACE MR0175/
ISO 15156-3.
Standard Materials
Bolts 316 SS, 2-1/4" Long Hex Head
Flange Seals Teflon®
(Taylor Mount Both Sides) Grafoil®
Pressure and Temperature Ratings
Standard Manifolds & ASME B31.1 / 2500# Class
Refer to existing Coplanar™ Manifold Pressure and Temperature Rating
Note: AK-901 Adapter does not effect Manifold Pressure and Temperature Rating.
All rights reserved. Copyright © 2010, Yokogawa Electric Corporation. Subject to change without notice.
GS 22B01C55-01EN-A
August 2010
3
COPLANAR™ ADAPTER: AK-901 FOR DIFFERENTIAL PRESSURE MANIFOLDS
Ordering Information
AK901
CO
/X81
Body Style
AK901
Coplanar™ Adapter
Body Code
CO
A479-316 Stainless Steel Body and Bolts
(Meets NACE MR0175/ISO 15156-3)
Teflon Flange Seals (Taylor Mount)
Option Code
/X81
Grafoil® Flange Seals (Taylor Mount)
NOTE: For other body materials, consult factory.
Notes:
Teflon® is a registered trademarks of the E.I. du Pont de Nemours and Company.
Grafoil® is a registered trademark of Union Carbide Corporation.
All rights reserved. Copyright © 2010, Yokogawa Electric Corporation. Subject to change without notice.
GS 22B01C55-01EN-A
August 2010