E
I
R
E
S
S
R
O
H
Your industrial supply distribution company
MEMBER
Jusqu’à épuisement des stocks
MOLYDAL depuis 1958
Edito
Spécialiste de la lubrification industrielle
depuis 1958 et acteur majeur dans l’évolution
des produits pour la maintenance, la société
MOLYDAL contribue à l’optimisation de la
durée de vie des équipements industriels tout
en améliorant la sécurité des utilisateurs et la
rentabilité opérationnelle.
Par son savoir-faire, la société MOLYDAL
est aujourd’hui le fournisseur partenaire des
industries alimentaires, industries sucrières,
industrie de la granulation, sidérurgie, injection
plastique, automobile, énergie,….
In pursuit to bring you the best technical products and the best service, The Ficodis Group is constantly
developing new partnerships.
Pour répondre à tous les besoins requis pour
la maintenance préventive et curative dans les
It is in this spirit that we are very pleased
to announce
that MOLYDAL
hasMOLYDAL
chosen
Ficodis
as its exclusive
industries, la société
propose
une
MOLYDAL
depuis 1958
gamme complète:
distributor for its Canadian development and to support its international
growth strategy.
• Des produits aux qualités usuelles mais
Spécialiste de la lubrification industrielle
également spécifiques à certaines
A family business since 1958, MOLYDAL
an industrial
lubricants
manufacturer
that has positioned themdepuis 1958 is
et acteur
majeur dans l’évolution
contraintes :
haute ou basse température,
des produits pour la maintenance, la société
extrême pression,
ambiances
humides ou focuses on finding
selves as a true partner for supply-chain managers.
Their
laboratory
research
and
development
MOLYDAL contribue à l’optimisation de la
chimiquement agressives, pour contact
durée de vie
des équipementsto
industriels
alimentaire,…. lubrication products.
formulas through green chemistry which allows
MOLYDAL
offertout
eco-friendly
en améliorant la sécurité des utilisateurs et la
rentabilité opérationnelle.
• Des produits innovants formulés par
industries alimentaires, industries sucrières,
industrie de la granulation, sidérurgie, injection
• Des systèmes de lubrification pour une
laboratoire R&Dincluding
intégré permettant
In this “HORS-SERIE” SELECTION, you’ll find 22 high performanceleproducts
a range of eco-friendly
Par son savoir-faire, la société MOLYDAL
l’utilisation de produits écoresponsables,
and non-toxic products for preserving theesthealth
operators.
aujourd’huiof
le fournisseur
partenaire des
sans COV voire biodégradables.
plastique, automobile,
distribution optimisée
(diminution des pertes
Fully available and in-stock, this range
coversénergie,….
the following products
:
produits et gain de temps des techniciens) :
Pour répondre à tous les besoins requis pour
la maintenance préventive et curative dans les
industries, la société MOLYDAL propose une
gamme complète:
MOLYDAL depuis 1958
• Greases
• Assembly pastes
• Lubricants for chains
• Degreasers
• Maintenance
• savoir-faire,
Penetrating
oil
Par son
la société MOLYDAL
Spécialiste de la lubrification industrielle
depuis 1958 et acteur majeur dans l’évolution
des produits pour la maintenance, la société
MOLYDAL contribue à l’optimisation de la
durée de vie des équipements industriels tout
en améliorant la sécurité des utilisateurs et la
rentabilité opérationnelle.
est aujourd’hui le fournisseur partenaire des
industries alimentaires, industries sucrières,
industrie de la granulation, sidérurgie, injection
plastique, automobile, énergie,….
Pour répondre à tous les besoins requis pour
la maintenance préventive et curative dans les
industries, la société MOLYDAL propose une
gamme complète:
• Des produits aux qualités usuelles mais
également spécifiques à certaines
contraintes : haute ou basse température,
extrême pression, ambiances humides ou
chimiquement agressives, pour contact
alimentaire,….
pompes à graisse manuelles ou électriques,
systèmes de graissage centralisé, systèmes
de micro lubrification, ….
Une équipe conseil de proximité est au service
des utilisateurs pour les accompagner vers des
solutions et préconisations sur mesure.
• Des produits innovants formulés par
le laboratoire R&D intégré permettant
l’utilisation de produits écoresponsables,
sans COV voire biodégradables.
• Des systèmes de lubrification pour une
distribution optimisée (diminution des pertes
produits et gain de temps des techniciens) :
pompes à graisse manuelles ou électriques,
systèmes de graissage centralisé, systèmes
de micro lubrification, ….
Of course, this selection is only part of the opportunities we offer through MOLYDAL.
Do not hesitate to
salesestteam
for any other request.
Unecontact
équipe conseilour
de proximité
au service
• Des produits aux qualités usuelles mais
les accompagner vers des
Heredes
isutilisateurs
a newpour
force
to better serve you!
également spécifiques à certaines
solutions et préconisations sur mesure.
contraintes : haute ou basse température,
extrême pression, ambiances humides ou
chimiquement agressives, pour contact
alimentaire,….
Best Regards,
Christophe Bévillard
• Des produits innovants formulés par
le laboratoire R&D intégré permettant
l’utilisation de produits écoresponsables,
sans COV voire biodégradables.
• Des systèmes de lubrification pour une
distribution optimisée (diminution des pertes
produits et gain de temps des techniciens) :
pompes à graisse manuelles ou électriques,
systèmes de graissage centralisé, systèmes
de micro lubrification, ….
MULTI TP
MULTI PURPOSE GREASE
Une équipe conseil de proximité est au service
des utilisateurs pour les accompagner vers des
solutions et préconisations sur mesure.
• Temp. : -20°C / +140°C • GRADE NLGI 2
• 180 Kg • 50 Kg • 1 Kg • 400 g • 16 Kg / 5 L
CHARACTERISTICS
MULTI TP is high performance and multi purpose grease. The thickener gives to MULTI TP a good
mechanical stability at work and during storage.
The product has extreme pressure additives to reduce wear under high load and to give protection
against corrosion for all type of materials
MULTI TP is adhesive on all metals.
USES
For all type of bearings, joints, pins, swivels, racks, agricultural machinery, cement-plants, brickyards,
sugar factories, quarries, mines, road transport.
SCA 200
HIGH PERFORMANCES GREASE
• Temp. : -25°C / +180°C • GRADE NLGI 1/2
• 200 Kg • 50 Kg • 400 g
CHARACTERISTICS
SCA 200 is highly technical grease suitable for the lubrication of mechanical parts working under
high loads and in humid surroundings.
USES
Outstanding anti-wear and extreme pression properties. Outstanding mechanical stability when
there is water. Particularly adapted to the lubrication in sectors of heavy industry : paper mills,
still industry, cement works, quarries, sand quarries.
GREASES - ASSEMBLY PASTES
GREEN LIFE
ECO-LABELLED GREASE MADE OF SYNTHETIC ESTERS
FROM SUSTAINABLE MATERIALS
• ECOLABEL • >80% BIODÉGRADABILITÉ
• GRADE NLGI 2 • 50 Kg • 400 g
DESCRIPTION
From sustainable synthetic esters
USE
It is used for any lubricating operations where the lubricant can be released to the
environment, for instance: agricultural and forestry machines, mining, excavation and
construction machines, motorised locks, cranes, conveyor belts in mines and quarries
FUTURA
AEROSOL MULTI-FUCTIONAL GREASE
• Temp. : -20°C / +150°C • GRADE NLGI 2
• 800 ml • 27.05 fl.oz
DESCRIPTION
Grease aerosol for all moving mechanisms Long life and difficult access lubrication Light colour
USES
FUTURA is suitable for use in applications where clean lubrication is (where oil throw can not be
tolerated) and where long-term lubrication is required.
• Lubrication of moving machinery • Lubrication of bearings working at low speeds, at all loads
and at high temperatures • Food industry (particularly packaging machines)
• Electro-mechanical industries • Paper works (pulp preparation...) • Brick-yards, cement-works
and quarries
DELTA SPRAY
MOLYBDENUM DISULPHIDE ASSEMBLY PASTE
• Temp. : -35°C / +420°C
• 650 ml • 21,66 fl.oz
DESCRIPTION
DELTA SPRAY is an assembly paste in aerosol spray designed for lubrication of all mechanical
parts components during assembly and in use at low or high temperatures.
USE
Assembling, conical shrinking, keying, threading, corrugated shafts, axles, bearings, sprockets
as well as all difficult mechanical mountings.
Joints, slides, guiding columns, transmission endless screws, etc…
Gearing, lubrication of pistons, jack-rods, transmission chains…
THERMOLUB SP
HIGH TEMPERATURE COPPER ASSEMBLY COMPOUND
• Temp. : -25°C / +1200°C • GRADE NLGI 1 / 2
• 1 Kg
DESCRIPTION
Copper based paste. Chemical, thermal or atmospheric resistance. Insoluble in water,
diluted acids and steam.
USES
Assembly of steam seals, cylinder head gaskets and flanges. Lubrication of valves, slides and
bearings operating at very low speeds and high temperatures. Assembly of exhaust pipes.
Lubrication of pads, slides and bearings operating at very low speeds and very high temperatures.
Protection and lubrication of all live electrical contacts over 15 volts.
ASSEMBLY PASTES - GREASE FOR GEARINGS
OPEN GEAR 844 DTZ
GREASE FOR GEARINGS AND CABLES
• Temp. : -20°C / +160°C • GRADE NLGI 0/1
• 800 ml • 26,66 fl.oz
DESCRIPTION
Extreme pressure mixture containing a high percentage of molybdenum disulphide;
insoluble in water. Soap : aluminum complex.
USE
Grease for cables and gears subject to high loading, and generally for all slow, driven
and open mechanisms.
VEGA 908
LUBRIFIANT POUR CHAINES
• POINT ÉCLAIR >100°C • Temp. : -30°C / +140°C
• 650 ml • 21,66 fl.oz
DESCRIPTION
Without safety labeling. Based on renewable raw materials used for lubrication in humid
conditions. Smooth and stick with good anti-wear qualities. High penetration for a uniform
distribution of lubricant to center channel axes.
USE
Chain conveyors quenching Channels, paint or screen printing ovens.
For chains of transmission of the tapestry industry , dry cleaners, ...
FILLMORE AL
STICKY CHAIN LUBRICANT AEROSOL FOR INCIDENTAL CONTACT
WITH FOODSTUFFS
• NSF • Temp. : -20°C / +180°C
• GRADE NLGI 1/2 • 650 ml • 21,66 fl.oz
DESCRIPTION
Synthetic lubricant with remarkable adhesion properties. Completely insoluble in water Colourless.
Non-Food Compounds Program Listed H1 Registration.
USE
For all drive chains, conveyor belts, and lifting chains used during the manufacture or packaging
of food or pharmaceutical products. Sterilisation, bottling, food handling and fermentation lines,
as well as ovens in the agro-food industry. For all types of mechanisms or gears operating at high
speed.
NS 250
CLEAN HIGH TEMPERATURE CHAIN LUBRICANT
• POINT ÉCLAIR >260°C • Temp. : -30°C / +260°C
• 200 L • 5 L • 650 ml • 21,66 fl.oz
DESCRIPTION
Adhesive chain oil. Low volatility at high temperature.
USE
Lubrication of conveyor chains, quenching chains, paint oven and screen printing chains.
Lubrication of transmission chains in the wall covering and dying industries, etc.
In extreme temperatures and dusty conditions. Lubrication by immersion, brush application,
drip feed or by spraying.
DEGREASING - MAINTENANCE
STARNET
WORKSHOP DEGREASING AEROSOL
• 650 ml
• 21,66 fl.oz
DESCRIPTION
A cold degreasing agent with very strong solvent properties. Grease, oil and sludge removal ;
it also removes labels (it may attack rubber and plastics).
USE
Perfectly suitable for degreasing operations on all metals where quick evaporation is required.
KL9H Pulvérisateur
VOV FREE DEGREASING AGENT
• AFSSA • Temp. : 0°C / + 100°C
• 200 L • 20 L / 5 L • 750 ml • 25 fl.oz
DESCRIPTION
Water-based cleaner from sustainable materials. Free from VOC, petrol-based solvent,
and glycols. Comply with the AFSSA nomr n° 2007-SA-0028.
USE
KL 90 easily eliminates grease, oil, sludge and temporary oil or wax protection.
CONTACTOL DTZ
CLEANER AND DEOXIDANT FOR ELECTRICAL
• POINT ÉCLAIR : sans • 520 ml • 17,33 fl.oz
• RIGIDITÉ DIÉLECTRIQUE : 40 KV
DESCRIPTION
A non-flammable cleaner–deoxidant for electrical and electronic circuits Can be
used on live circuits.
USE
Cleaning and rinsing agent for all electrical and electronic mechanisms such as hi-fi,
telephone, windings, relays,
printed circuits, radar equipment, meters, etc.
AIRBUL NF
LEAK DETECTOR FOR ALL TYPES OF GAS
DESCRIPTION
• 5L
• 650 ml • 21,66 fl.oz
Gas leak detector. Detects leaks of air or gas under pressure.
Foam reaction fluid containing a corrosion inhibitor which eliminates all risk of corrosion.
USE
Tightness checking on all pipework, tanks, valve, taps, unions, etc. Essential in any company
using compressed air or gas.
MAINTENANCE
GALVASUN
GLOSSY COLD GALVANISING AGENT
• TEMPS DE SÉCHAGE POUR UNE RÉSISTANCE
TOTALE = 24H • 650 ml • 21,66 fl.oz
DESCRIPTION
A glossy aluminium-based galvanising agent for long life protection of metals.
Coating with good resistance against aggressive conditions.
USE
For the protection of all surfaces with a film of aluminium.
DRYPROTEC
PROTECTIVE FLUID
• 650 ml
• 21,66 fl.oz
DESCRIPTION
Very thin wax film, dry to the touch and with very high moisture resistance. Water repellent effect
removing drops of water caused by condensation. Does not run and consequently prevent
clogging of moulds and soiling around workstations.
USE
Protection of steel tubes after rolling. Protection of ferrous metals after machining, or as cast.
Protection of all types of tooling and injection moulds and for storage of workpieces between
machining operations. Protection of chains, bearings, etc.
SILICONES
MULTIPURPOSE SILICONES
• 800 ml
• 27.05 fl.oz
DESCRIPTION
All-purpose silicones. For high and low temperature applications.
USE
Use as a mould release agent for rubber and plastics. Lubrication of precision instruments
in laboratories and in the clock making industry. Guillotine lubrication in the cardboard industry.
Weaving loom lubrication..
TEFLUB
DRY PTFE FILM
• TEMPS DE SÉCHAGE : 5 MIN. • 650 ml • 21,66 fl.oz
• Temp. : -180°C / + 260°C
DESCRIPTION
A dry anti-stick lubricant that can be used to protect tooling, and also as a mould release agent.
As a mould release agent it is an excellent anti-sticking agent for all types of surfaces.
USE
A dry lubricant for wood, metal, paper, glass, rubber and plastics. Protection of tanks, cables,
offset cylinders, seals, etc. in aggressive and corrosive chemical conditions. A dry lubricant for
fastenings, door hinges, locks, cables, slides, threads, springs and pulleys. Lubrication in abrasive
conditions (glass works, paper mills, etc.) For mould release agent: An excellent agent for
plastics, laminates, araldite, etc.
MAINTENANCE - LUBRICANT
VGCUT 77
WATER BASED LUBRICANT DRILLING - TAPPING
• 650 ml
• 21,66 fl.oz
DESCRIPTION
Water based fluid made of vegetal polymer. Non flammable, VOC free and biodegradable,
no safety restrictions Can be used on any materials.
USE
Drilling, tapping.
REMFOR V7 +
LUBRICANT PENETRATING OIL
• POINT ÉCLAIR > 60°C • Temp. : 0°C / + 100°C
• 5 L / 20 L • 520 ml / 800 ml • 27.05 fl.oz
DESCRIPTION
Colourless lubricating penetrating oil. Penetrating fluid with a low friction coefficient suitable
for lubricating micro mechanisms. Compatiblle with most polymers.
USE
It serves for the reconditioning of all seized mechanical parts, and for the maintenance
and cleaning of all mechanisms. Lubrication, light tapping and drilling.
DEGRIPPANT MOS2
MOS2 LUBRICANT PENETRATING OIL
• POINT ÉCLAIR + 65°C
• 5 L • 800 ml • 27.05 fl.oz
DESCRIPTION
MOS2 lubricating penetrating oil with very high penetration properties.
Prevents from future seizure.
USE
MOS2 lubricating penetrating oil with very high penetration properties. Its ingredients
combined with molybdenum disulphide form a penetrating oil with excellent characteristics :
Coating by MOS2 prevents future seizure.
TOP 5
5 FUNCTIONS: LUBRICANT – PENETRATING OIL ANTICORROSION – WATER REPELLENT - DEOXIDISING
• PROTECTION SOUS ABRI: 1 AN
EXTÉRIEUR : 6 MOIS • 650 ml • 21,66 fl.oz
DESCRIPTION
5 - Function. Water repellent and lubrication fluid. In addition to its protection
and lubrication properties, it also has water repellent characteristics.
USE
Storage of machined or cut-out parts. Protection of moulds and foundry and glass-making tools.
Protection of sporting guns. Lubrication of chains in moist and oxidising conditions.
Greasing of all locks, hinges, etc.
Your industrial supply distribution company
A group of specialized companies that combine their expertise
to offer you a wide array of products and services