Data sheet
Item number: 3671.83.42
Starch separators ▶ Starch separator for free-standing installation
Fapurat-PE-OAE
Product information for the product group
ACO Product benefits
■ Odour-free emptying, cleaning and fill-
ing
■ Pre- and post-cleaning times can be set
individually
■ Hydromechanical high-pressure clean-
■
■
■
■
■ Starch separators
■ With integrated settlement chamber
■ With hydro-mechanical internal cleaning
and disposal pump
■ To be installed indoors, free-standing
■ Made from polyethylene, material PE-HD
■ Automatic high-pressure internal cleaning
with pump
□ Nominal pressure: 175 bar
□ Capacity: 13 l/min
□ Chopping, mixing, rinsing in one process
ing – only a cold-water connection required
For odour-free direct emptying
Minimises disposal and maintenance
costs thanks to economic step increases in nominal size
Small delivery dimensions
Low weight
■ Standard control with group fault report-
■ With spray attachment (on-site industrial
ing
■ Free flow pump as disposal pump for settlement chamber and separating compartment:
□ Motor power: 3.0 kW/2850 rpm
□ Delivery performance: 20 m³/h at
1.0 bar medium delivery head
■ Draining connection, fire hose quick coupling B 2½"
■ Stop valve upstream of disposal pump
water connection ¾")
■ With filling device ( ¾") and magnetic
valve for automatic refilling
■ With viewing window and wiper
■ With suction and emptying sump with
drain plug socket 1½" with plug
■ Oval construction without separating wall
(ideal for ease of cleaning)
■ With 2 odour proof maintenance open-
ings, diameter: 350 mm
■ Electrical connector: 440 V/50 Hz/6.9 kW
■ Operating side: right/left
Item Technical Data 3671.83.42
Nominal capacity
NS 1
Nominal width
DN 100
Total content
Weight
Empty
Full
[l]
[kg]
[kg]
975
251
1226
Note: Further extensions possible (base version, extension level 1 – 3) on request.
Excluding errors and changes.
Operation side
Right-hand
ACO eServices on the Internet:
Infobox
Item number: 3671.83.42
Version: 17.06.2017
Page 1 of 3
Data sheet
Item number: 3671.83.42
Starch separators ▶ Starch separator for free-standing installation
Dimensions
Nominal capacity
NS 1
Dimensions
L1
L2
L3
L4
H1
H2
H3
H4
H5
W1
W2
B3
B4
D
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
1860
2000
2850
650
1190
1120
1550
1750
1850
750
820
370
840
110
Accessories
Description
Sampling pot DN 100
Used with
Description
Item number
3300.09.11
■ Grease separator Eco-Jet/Hydro- ■ For installation of horizontal
jet
□ NS 1 – 4
■ Starch separator Fapurat-PE
□ NS 0.5 – 1
pipes DN 100 to grease separator
■ Round shape with
□ Coupling socket seal (material SBR) on inlet and spigot on
outflow
□ Odour-proof maintenance
opening DN 450
■ Weight: 7 kg
Note: Further extensions possible (base version, extension level 1 – 3) on request.
Excluding errors and changes.
ACO eServices on the Internet:
Infobox
Item number: 3671.83.42
Version: 17.06.2017
Page 2 of 3
Data sheet
Item number: 3671.83.42
Starch separators ▶ Starch separator for free-standing installation
Description
Used with
Remote control
■ Grease separator Lipurat/Hydro-
■ For internal fitting or fitting in
jet-OAE/RAE
■ Starch separator Fapurat-OAE
connection boxes
■ Control line without protective
conductor on-site
□ Up to 50 m: 7 x 1.0 mm²
□ 50 – 200 m 7 x 1.5 mm²
■ IP 54 protection
■ Weight: 1 kg
■ Grease separators
■ Starch separators
■ For evacuation connection and
Connection box
Description
Item number
0150.03.40
7601.80.20
remote control
■ Made from stainless steel, material grade 304
■ Fixing: "On wall"
■ Dimensions (width x height x depth):
500 x 500 x 160 mm
You can find further accessories under ➔ /36718342
Note: Further extensions possible (base version, extension level 1 – 3) on request.
Excluding errors and changes.
ACO eServices on the Internet:
Infobox
Item number: 3671.83.42
Version: 17.06.2017
Page 3 of 3