®
Environmental Assurance ISO 14001
Ε 502 MINI BASKETBALL HOOP
TECHNICAL DESCRIPTION
COMPOSITION :
 1 METAL POLE
 1 BACKBOARD 1300Χ1000mm
 1 ANCHOR BASE
The matal pole is made of steel St-37 with thickness 3mm on which the backboard is adjusted. To the lower point
there is an anchor base.
The basketball goal is made of steel with diameter Φ20mm and it has metal rings to support the net which is made
of nylon with diameter Φ5mm. The basketball goal is placed by the ground in distance 2600mm
The backboard is made of steel St-37 dimensioned 1300X1000mm and it’s supported by metal elements made of
steel dimensioned Φ33mm and Φ26mm. The final surface is shaped from PLEXIGLAS with thickness 10mm.
The anchor base is made of steel St-37 dimensioned 60X60X6mm & 50X50X5mm and it is anchored to the
ground in holes 650mm deep.
MATERIALS :
METAL PARTS
The metal parts which are used for the construction (bolts) are from steel St-37 thermo galvanized or electro
galvanized.
The dimensions of the metal parts are completely sufficient το accept the charges of force for which they’ve
been studied. They have great resistance to the corrosion and to the big changes of the temperature.
LACQUERS
Water – thinnable, quick drying finish, non – yellowing and biocide – free, excellent weather
resistance and permanent flexibility very good anti – blocking properties in accordance ONORM S 2102 / TA
– ABFALL / BRD – 55503
FOUNDATION – ASSEMBLY
For the assembly and foundation of the construction detailed instructions are attached for your assistance.
Our company is in compliance with ELOT EN ISO 9001: 2000 and EN ISO 14001-2004.
THE COMPANY TECHNICIAN
P.O. Box 319. Ifestou 6, Oreokastro, 570 13 Thessaloniki, Greece
Tel. +30 2310 682788 (7 lines), FAX: +30 2310 682772
http:/www.ermisltd.com, e-mail: [email protected]
page 1 of 1