TECHNICAL DATA SHEET
WINDOW
MARKERS
STAINLESS ROUND AND
SQUARE
Window markers stainless steel
Range Markers
Group Window Markers
Material 316 marine grade stainless steel
Finish Mill finish
Substrate As to particular product/substrate type recommendation
fixing As to particular method for product/substrate type recommendation
FEATURES
Mill finished design on exposed face and smooth rounded edge
Manufactured in Australia from rolled 1.6mm solid 316 marine grade stainless steel
UV stabilsed self adhesive substrate mounting
Designed to assist in the compliance of AS/NZS 1428.1 2001 Note 7.5.1
5 year product, 2 year installation warranty
DTAC’s facility to reclaim, recycle and reinstate
LUMINANCE TESTING
Important information: To determine a luminance contrast between a substrate and the
DTAC Marker, see: AS/NZS 1428.4 2002 page 51–59, appendix F
TEST
AS 1428:4 2002 Appendix F
TYPE Access for people with disabilities
RATING Luminance Reflectance rating / Mean TBA
REPORT
Test report N/A
APPLICATION
Glazing should be designed and installed to comply with AS 1288
Frameless or fully glazed doors, sidelights and any glazing capable of being mistaken for a doorway or opening, should be clearly marked for the full width with a contrasting
line, which requires a minimum of 30% luminance contrast when viewed from either side. If further clarification is required, please refer to AS 1428.1 2001, note 7.5.1.
See diagram below
SQUARE WINDOW MARKERS
melbourne
CANBERRA
PERTH
SYDNEY
BRISBANE
DARWIN
ADELAIDE
HOBART
Unit 4, 1–7 Friars Road Moorabbin Victoria
Australia 3189
PO Box 2210 Moorabbin Victoria
Australia 3189
T 1300 793 478
F 1300 780 628
DTAC Pty Ltd
ABN 41 093 070 127
[email protected]
www.dtac.com.au
900–1000 MM
75
CIRCLE WINDOW MARKERS
GL
FLOOR TO CEILING GLASS
ENTRY DOOR
TECHNICAL DATA SHEET
WINDOW MARKERS STAINLESS
ROUND AND SQUARE
INSTALLATION
Type 1 substrates
Stone, masonry, timber, vinyl
DTAC Pty Ltd
ABN 41 093 070 127
Type 2 substrates
Unit 4, 1–7 Friars Road Moorabbin Victoria
Australia 3189
PO Box 2210 Moorabbin Victoria
Australia 3189
T 1300 793 478
F 1300 780 628
[email protected]
www.dtac.com.au
vitrified porcelain, ceramics, glass, metals
CODE WM-SS-SQUARE-50
CODE WM-SS-SQUARE
Fixing Self adhesive
Fixing Self adhesive
NOTE Only apply to vertical surfaces
NOTE On a transparent surface, 2 units required back to back
between substrate. Only apply to vertical surfaces
GREEN 100% recyclable,
GREEN 100% recyclable
AVAILABLE SIZES
YOUR LOGO OR
GRAPHIC HERE
YOUR LOGO OR
GRAPHIC HERE
CODE WM-SS-SQUARE-50
CODE WM-SS-SQUARE-50-CUSTOM
CODE WM-SS-ROUND-50
CODE WM-SS-ROUND-50-CUSTOM
SIZE W50 x H3 mm
SIZE W50 x H3 mm
SIZE W50 x H3 mm
SIZE W50 x H3 mm
YOUR LOGO OR
GRAPHIC HERE
YOUR LOGO OR
GRAPHIC HERE
CODE WM-SS-SQUARE-30
CODE WM-SS-SQUARE-30-CUSTOM
CODE WM-SS-ROUND-30
CODE WM-SS-ROUND-30-CUSTOM
SIZE W30 x H3 mm
SIZE W30 x H3 mm
SIZE W30 x H3 mm
SIZE W30 x H3 mm