THERA-TRAINER
BALO 536
The THERA-Trainer balo is a therapy device for people with physical impairments. The THERA-Trainer balo
was developed for daily use in facilities and is in accordance to the most recent quality and safety standards.
FOR PLENTY OF USERS
From a therapeutic point of view, standing can‘t be
overrated. Safe standing and good balance are basic
requirements for walking. The standing and balancing
exercisers are suitable for patients with risk of falling
as well as for wheelchair users and patients in vegetative state. Dynamic vertical exercise is the »champions league« for every patient.
IMPORTANT THERAPY GOALS






strengthen pelvis and trunk stability
improvement of balance
mobility / regulation of tonus
activation of metabolism and cardio vascular system
improvement of breathing
psycological stabilisation
TWO EXERCISERS IN ONE
PLUG AND PLAY
In 2003, standing was virtually reinvented when we developed the balance unit – »dynamic standing« was
born. Dynamic standing is more of a challenge and
thus much more motivating for the patient. Dynamic
standing exercises are always active exercises – this is
why therapists appreciate them so much.
All products from the Standing & Balancing series can
be combined with a large-format 23“ colour screen.
Just plug it in, select a fitting therapy session with a
matching biofeedback option, press the START button
and start your exercise.
QUALITY MADE IN GERMANY
»Made in Germany« is a synonym for highest quality, reliability and safety. Even when developing, we focus on
internal quality checks. In our own test labs we conduct high-stress performance tests and safety checks. 95
% of our carefully selected suppliers have their headquarters in Germany, so »Made in Germany« applies here
as well. To keep up with all your requirements, we thoroughly test the THERA-Trainers‘ suitability for daily use
in medical facilities.
PRODUCT SPECIFICATION
BASIC EQUIPMENT
Base unit
- stable and durable metal construction
- Four lockable transport castors with a diameter of
7,5 cm (7 inch)
- stable metal treat with a non-slip wear-resistant
rubber mat incl. holes for a flexible fixation of the
foot securing system
Forefoot quick
securing
system
- can be placed on the tread variable without help
of tools
- forefoot can be secured with velcros
Quick securing
system for
heels
- can be placed on the tread variable without help
of tools
- heel can be secured with foamed shell
Balance-Unit
- long with high spring resistance
- spring resistance can be adjusted in 6 steps without help of tools
- releasing/blocking of the balance function with
help of the release handle
- adjustable movement range:
> Position 0: 0°
> Position 1: 6°
> Position: 2: 11°
Knee support
set
- for safe guiding/securing of the knees
- adjustable in height, abduction and horizontal
distance without tools
- demountable together/individually
- easily washable and sanitizable
- for knees with a width up to ca. 120mm
Pelvic support
set
- for secure lateral and backward support of the
pelvis
- adjustable in height, abduction and distance
without tools
- pelvic support can be swung away for „easy entry“
of the user
- easily washable and sanitizable
- for pelvis widths upt to ca. 220 - 440 mm (8,66 17,32 inch)
Table unit
- table board (445 x 720 mm/ 17,52 - 28,35 inch) with
long vertical pipe
- table board made of laminated wood with extremely
resistant finishing and cushioned body cutout
- height adjustment of the table supported by gas
springs, which can be adjusted without tools separately for left and right side
- easily washable and sanitizable
- adaptation to the stomatch girth in horizontal steps
of 43 mm (1,69 inch) with help of tools
Miscellaneous
Product lifetime = 10 years
EQUIPMENT
deliverable
equipment
Tread extension (A002-764); tread enhancement
(A002-765); knee support set small (A002-433); knee
support set wide (A002-347); center cushion for pelvic support set (A003-726); patient belt with bottom
enlarged and leg straps, sizes S/M/L/XL (A002352, A002-353, A002-354, A002-355); arm support
cushion (A002-428); upper body support (A002-356);
center cushion for upper body support (A002-357);
electric lift (A002-358); control- and display unit with
23,6“ colour screen incl. touch function (A003-683);
control and display unit with 10,4“ colour screen
incl. touch function and SD card (A002-836); table
holder for control and display unit with 10,4“ colour
screen (A003-795); mobile holder for control and
display unit (A002-302); isolating transformer 230V
(A004-001); software package balancing for Windows
CE (A002-359); feedback sensor Type A incl. touch
button for software package balancing (A003-881);
bluetooth receiver for sensors (A004-020); feedback
sensor fixing set for THERA-Trainer balo (A003-977);
USB-power supply for feedback sensor (A003-980)
TECHNICAL DATA
Dimensions
L x W x H = 118 cm x 78 cm x 95-125 cm
L x W x H = 46,5 x 30,7 x 37,4 - 49,2 inch
Weight
76,8 kg
169,3 pound
Noise emission
LpA > 45 dB (A)
permitted patient height
150 cm - 200 cm
Suitable for
users with max.
weight of
max. 140 kg
max. 283,4 pound
protecting class
class II / Typ BF / IP2X
medical pro­
duct class
I
standards
CE including:
DIN EN 60601 - 1
DIN EN 60601 - 2
DIN EN ISO 13485
MDD 93/42/EEC
medica Medizintechnik GmbH | Blumenweg 8 | 8 8454 Hochdorf | Tel +49 7355 -93 14-0 | [email protected] | www.thera-trainer.de