Typical Details
Tie-Down System
CINCH NUT (CNX) INSTALLATION
C1
BEARING PLATE WASHER (PW)
C2
NOTCHES INDICATE
HIGH STRENGTH
WITNESS HOLE
HIGH STRENGTH
COUPLER
HIGH STRENGTH
REDUCER
WITNESS HOLE
STANDARD
COUPLER
STANDARD
REDUCER
WITNESS HOLE
THREAD ROD IN HALF WAY
FROM EACH SIDE, VISIBLE
THROUGH SITE HOLE
FULLY SEAT LARGE DIA.
ROD FIRST, FULLY SEAT SMALL
DIA. ROD SECOND
SO REDUCER CANNOT TURN
25
NOTE: ROD THREADS SHALL FULLY ENGAGE COUPLER
COUPLER NUT (CNW)
C3
Z-ROD (ZR)
C4
Typical Details
Tie-Down System
COMPRESSION POST LOCATION
C5
ALLOWABLE ROD OFFSET
C6
POSTS OVER BEARING PLATE WASHER
C7
ANCHOR @ BEAM
C8
26
Typical Details
BRIDGE TERMINATION OPTION
Tie-Down System
C9
STRAP TERMINATION OPTION
C10
27
TOP PLATE TERMINATION OPTION
C11
Z-ROD THREAD BLOCKING
C12
Typical Details
Tie-Down System
COMPRESSION POST LAYOUT
Details with built-up 2x4 and 2x6 member posts are also available
C13
INSTALLATION @ COMMON CORNER
C15
COMPRESSION POST EDGE NAILING
C14
INSTALLATION @ INTERSECTION
C16
Details with built-up 2x4 and 2x6 member posts are also available
28
Details with built-up 2x4 and 2x6 member posts are also available
Details with built-up 2x4 and 2x6 member posts are also available
Typical Details
AT-32 ELEVATION @ BEARING JOISTS
Tie-Down System
C17
AT-32 SECTION @ BEARING JOISTS
C18
29
AT-32 ELEVATION @ HANGING JOISTS
C19
AT-32 SECTION @ HANGING JOISTS
C20
Typical Details
Tie-Down System
AT-65 ELEVATION @ BEARING JOISTS
C21
AT-65 SECTION @ BEARING JOISTS
C22
AT-65 ELEVATION @ HANGING JOISTS
C23
AT-65 SECTION @ HANGING JOISTS
C24
30
Typical Details
Tie-Down System
+
_ 9"
ANCHOR W/ PLATE WASHER @ DECK
Intentionally
Left Blank
+
_ 9"
C25
ANCHOR W/ NUT @ DECK
C26
Intentionally
Left Blank
31
Typical Details
PAIRED CT - WALL TIE
Concentric Ties
C27
PAIRED CT - PURLIN SPLICE
Intentionally
Left Blank
32
SANDWICHED T2 - HOLD DOWN
C29
C28