square root
WALL ART
assembly hardware
Missing hardware?
Please call
800.606.6387 for
replacements.
A
4 - wood
dowels
4 - bolts
B
D
4 - barrel
nuts
mounting hardware
2 - small
screws
6 - large
screws
C
6 - plastic
anchors
2 - wall
brackets
1 - small template
Thank you for purchasing the Square Root Wall Art.
This page lists all the contents included in the box.
Please take the time to identify the hardware as well as
the individual components to this product. As you
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from
damage.
1 - large template
tools required
phillips head screwdriver
level
power drill (for pilot holes only)
components
Made in USA - r03
20 - dividers
1 - bottom rail
1 - top rail
2 - side rails
(1 left, 1 right)
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Page 1 of 3
square root
WALL ART
STEP 2
A
A
left and right
side rails
STEP 1
right
side rail
STEP 1
NOTE: Make sure hole of
barrel nuts are aligned
with holes in nearest edge
1
Insert 2 wood dowels and 2 barrel nuts into left
and right side panels as shown. Make sure
holes of barrels nuts are aligned with holes in
nearest edge.
2
B
top
rail
NOTE: Make sure keyholes
on side rails are positioned
up during assembly
left
side rail
STEP 2
bottom
rail
STEP 1: Fit dowels of left and right side rails
into corresponding holes of top and bottom rails
as shown. Using a phillips head screwdriver,
secure top and bottom rails with 2 bolts A as
shown. Make sure bolt securely engages barrel
nut.
STEP 2: Attach 2 brackets to bottom rail with 1
small screw B per bracket, using a screwdriver.
Do not over tighten the screws.
NOTE: Make sure slotted
ends are facing down during
assembly as shown
NOTE: Make sure slotted
ends are facing up during
assembly as shown
left
side rail
right
side rail
3
right
side rail
Insert 10 dividers into corresponding slots of top
and bottom rails. Make sure slotted ends of
dividers are facing up during assembly as shown.
Made in USA - r03
4
top
rail
Fit remaining 10 dividers into corresponding slots of
left and right side rails. Make sure slotted ends of
dividers are facing down during assembly as shown.
Assembly is now complete.
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Page 2 of 3
square root
WALL ART
wall mounting assembly
STEP 3
STEP 1: Determine final location of wall art. STEP 4
Place large and small wall templates on
desired wall as shown. If possible, make sure
D
at least 1 hole is aligned with a wall stud.
Using a level, adjust large and small wall
templates until it is level. Mark 3 holes on
level
wall.
STEP 2: Move small wall template to other
end of large wall template as shown. Level
and mark bottom hole on wall.
STEP 3: If a wall stud is not available, drill a
hole in the wall that is slightly smaller in
diameter than the anchor. Insert 4 plastic
anchors C into the holes. Gently tap each
anchor until the head is flush to the wall
surface.
STEP 4: Insert 4 large screws D into anchors,
leaving 1/4” of each screw head protruding
from the wall.
5
WALL
STEP 1
level
C
large wall
template
small wall
template
WALL
STEP 3
C
D
large wall
template
STEP 4
STEP 2
small wall
template
level
NOTE: If you are unsure about your wall type or
what mounting method you should use, consult a
qualified professional or your local hardware store.
STEP 1: Align keyholes of assembly with screw
heads and fit into position. Mark 2 holes of
bottom 2 wall brackets. Remove wall art.
STEP 2: If a wall stud is not available, drill a hole
in the wall that is slightly smaller in diameter than
the anchor. Insert 2 plastics anchors C into the
holes.
STEP 3: Fit wall art into position. Make sure
each screw securely engages each keyhole.
STEP 4: Secure wall brackets with 1 large
screw D per bracket.
Wall mounting is now complete.
cleaning & care
WALL
D
STEP 4
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.
D
STEP 2
wall
bracket
plastic
anchors
6
Made in USA - r03
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Page 3 of 3